Exception.log and mail.log stopped logging (MX7)

Hi all - we have been experiencing intermittent problems with our MX 7.02 server & checked the log files to help diagnose the problem.
However both exception.log and mail.log appear to have stopped logging information in June 2010.
The size of the logfiles is only 178K and 34K.
Does anyone know why they've stopped & how to restart the logging?
Many thanks
cf_rog

On CF7 as far as I know you need to restart the CF server. In CF9 you
can selectively enable/disable logging for those files and thus
attempt to restart logging.
Mack

Similar Messages

I recently updated my mac book pro and some of the apps like itunes, and Mail have stop responding. Itunes will work fine till I connect my iphone 4. The moment I connect my Iphone it stops responding.

I recently updated my Mac book and Itunes and Mail have stop responding.
iTunes work fine till I connect my Iphone. The moment I connect my iphone it stops responding. I have reset my phone couple of times already and have re-install iTunes few times. Does anyone have any other suggestion on it?
Mail will never Quit. It will get my new mails or send them when I start it but after five mins or so it will stop responding at all.
Please let me know if anyone is facing similar problem.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

Log and Capture suddenly stopped working

I encountered a strange issue today, I have a Cannon HF 200 and it created .MTS files when I record my video, I usually insert the SD card and than select log and capture from FCP7 and convert all my videos..but now when I insert my card and select log and capture, the card does not load and I cannot see any of the clips..which is very odd
I even trashed the preferences but to no avail
Any help guys??

I have also un-intalled and then re-installed FCP7< </div>
Why do people keep doing that? Macintosh software just doesn't work that way.
You probably turned the camera off before the software had completed the write to the card or you may have set the camera to record in a weird format or used the wrong drive setting. Try pluging the card into a PC? Have you tried the Canon users' forums? When you search for them, you will want to spell the brand correctly.
bogiesan

FCE4 error log and no avchd import (log and transfer)

Fresh install of FCE3, update to FCE4, update to 4.0.1 via softwareupdate but unable to import AVCHD material. Here's what the console says:
When starting FCE and while the splash screen is still visible:
25.03.10 13:20:17 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined.
When the splash screen disappeared:
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:59854840AFAB_423D_9007252E4EFA55BE": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:E3A7ACDE8062_4DA1_8865E9C67BF1E777": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:65F1384FAF3D_4583_A6E7B9F3898153A9": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:5BDAB25811B3_4D8B_A951152C96943BDC": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:B42177EC8BF6_459E_BAF8561A2FE1CE09": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
25.03.10 13:20:21 Final Cut Express[1635] Exception thrown while loading plugin "FxPlugWrapper:CA0ADC917105_4F1C_8EEAD5A64B98E5DF": * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
When opening "Logging and transfer" to import from my camera, sdcard or the avchd folder:
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOObject is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOTimecode is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. One of the two will be used. Which one is undefined.
25.03.10 13:20:31 [0x0-0xab0ab].com.apple.FinalCutExpress[1635] objc[1635]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. One of the two will be used. Which one is undefined.
When the conversion/import didn't complete:
25.03.10 13:20:33 Final Cut Express[1635] -[NSProgressIndicator animationDelay] is deprecated.
25.03.10 13:20:33 Final Cut Express[1635] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
The following QuickTime components are installed. Only leaving the marked ones(•) didn't change anything.
/Library/QuickTime content:
AC3MovieImport.component
• AppleIntermediateCodec.component
AppleMPEG2Codec.component
CanonMJPEGAVI.component
DesktopVideoOut.component
EyeTV MPEG Support.component
• FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
• LiveType.component
SMIQuickTimeExportComponent.component
TSCC.component
Any idea what could cause it and how to solve?

Ok.. more testing and research.
Final Cut Express doesn't support AVCHD Lite.
iMovie (my version is '09 - 8.0.5) does import AVCHD Lite directy from my TZ7.
Since iMovie is nice, but offers a bit less then FCE I just imported the clips from the TZ7 into iMovie, moved all imported clips to the timeline and exported a Final Cut XML. This one I imported into FCE and voila.. realtime editing with FCE of the clips from my TZ7.
A bit strange, that FCE doesn't support AVCHD Lite.. but the way through iMovie is doable.

Error Log and Mail Notification for WMTA Output

Hi Experts,
We are using WMTA output for creation of Transfer Orders for Outbound Deliveries. If the TO creation has failed or Partially successful also, WMTA output NOT showing any Log on reason for failure. I see log creation active for Output type, still no log is displayed. Can you please help me to overcome this issue?
In case if TO is created for Partial Quantity (say TO created for 25 PC against delivery quantity of 40 PC), output status shows green and doesn't display any log. Setup the mail control as given in Note 1756674 - WMTA output shows as processed but no transfer order was created. Still no mail notification is triggered for the error
Any inputs in this regard are highly appreciated
Thank you,
Surya

Hi Surya
Could you please check the setting for "Do not write processing log" as highlighted in the below screen

Log and capture, Someone has logged and captured whole tape

I need to capture clips from the captured material! Is there a way of doing this?

Sarcasm is almost impossible to impart in online forums . . .
. . is it . .
. . really . .
. . .do you think . . . .

ICal and Mail has Stopped Working

I updated to Mountain Lion a couple of days ago and now several things have stopped working:
1) iTunes lost all my music - managed to fix that one eventually.
2) iCal has lost all my reminders - this is a pain and I want them back.
3) Mail no longer works - I am not receiving or sending any emails from any of my 6 email accounts - they all worked perfectly before the upgrade.
Is there a generic fix, or do I need to start crying?

In the Finder, select Go ▹ Go to Folder from the menu bar, copy the text on the line below into the box that opens, and press return:
~/Library/Calendars
The calendar data is in the folder that opens.

My push notifications for facebook, twitter, and mail completely stopped working!

after the ios 6 update everything WAS working fine before that ... all settings are set right i have tried multiple master resets and normal resets deleted the app and reinstaled it turn notifications off and on and pretty much read every forum i can find ... i have spent a total of 9 hours on the phone with apple trying to fix it and they cant fix it either ... no genious bar has been able to fix it either and no one knows what the **** is wrong
heres my opinion apple knows everyone will upgrade to a iphone5 if facebook does work so they curroupt 90 percent of there users or my next opinion steve jobs dies and so does apple because he wouldnt release **** til it had been extremely tested and it would work he dies and everything apple releases is ****

Try a hard reset. Worked for me using the various beta builds of iOS 5.

Log and transfer stops for some reason

I just upgraded to FCE 4.0.1.
I am trying to Log and Transfer video that is AVCHD 720 30p.
I have FCE "easy setup" set to "HDV-Apple Intermediate Codec 720p30". I assume this is correct?
When I select a clip in Log And Transfer, put my in and out points, and choose "add clip to cue", the cued clip begins transferring and exactly 10 seconds later it just stops. I tried to start over with a new project and it keeps happening. Log and Transfer just stops. No injesting.
And there are no clips showing up on my scratch disk.
Help?

The AVCHD 720 30p was the camera info I was given.
I can't open the .MTS files with Quicktime or mpeg StreamClip so I'm unable to get any info from them.
When I select "get info" on the .MTS files (in a folder called "Stream", the attached screenshot shows this:

Failed attempt to move log and database paths

Hi. Can anyone offer any advice on what might have caused an attempt to move Exchange 2010 (SP3) mailbox database and log folder paths to fail? I can't diagnose it, and would appreciate any advice.
We have two databases in a two-node DAG, one mounted on each node. I removed the passive copy of each database before the move attempts. The first moved ok. The second failed. Here's a summary of what happened:
Task 1:
DAG-NODE-A ----------------------------DAG-NODE-B
MAILBOX-DB-01                               MAILBOX-DB-01
MOUNTED                                        HEALTHY (passive)
- Dismount database
- Remove passive copy.
- Move logfolder path from R: to L:
and move EDB path from S: to M:
- Succeeded.
- Mount datbase.
- Re-add passive copy
All ok.
Task 2:
DAG-NODE-A ----------------------------DAG-NODE-B
MAILBOX-DB-02                               MAILBOX-DB-02
HEALTHY (passive)                           MOUNTED
- Dismount database
- Remove passive copy.
- Move logfolder path from R: to L:
and move EDB path from S: to M:
- Failed. Paths not moved.
- Database now won't mount.
- Database eventually mounts
after approx. 30 auto retries.
- Abandon attempt to move paths.
- Re-add passive copy.
END
Here's some more detail, included event log and shell output:
So, as per the above, with Mailbox-DB-01 (active copy on DAG-NODE-A), Exchange moved the paths without a hitch and I was then able to mount the database and re-add the passive copy. I then tried to move the paths for Mailbox-DB-02 (active copy on DAG-NODE-B),
but after a few minutes Exchange aborted the move, outputting errors to the Shell, the application log and the MSExchange Management log. A second attempt failed because Exchange found that "The .edb file path is not available. There is already a file
named M:\Mailbox-DB-02\Mailbox-DB-02.edb" - Exchange had created an EDB file in the target location, but the source EDB file was still in the source location and the path was unchanged. Rather than re-trying the move again, I decided to try to mount the
database, to check it was ok, but it wouldn’t mount.
I left it alone for an hour or so to have a think about what to do, came back to it and found Exchange had mounted the database (without moving the paths) after around 30 automatic retries. I was then able to re-add the passive copy.
I’m not keen to re-try the move without knowing why it failed, why the database then wouldn’t mount, and why it subsequently recovered. Any advice would be appreciated. Many thanks.
Output included
- a WinRM error in the Shell’;
- an App Log error event from my attempt to mount the database after the move failure, saying an attempt to open the EDB file for read / write access failed with system error 32 because the file was being used by another process;
- events recording failure to configure and start the database, and noting a serious error which caused it to terminate its functional activity;
- Event ID 3154 from MSExchangeRepl, saying an Active Manager operation failed / database action failed / MapiExceptionCallFailed;
- Event ID 10056 from source MSExchangeIS Mailbox Store in the App Log just before Exchange successfully mounted the troublesome database, saying “Patch all ID counters for database Mailbox-DB-02.”
One other thing which may or may not be relevant – the MSExchange Service Host service stops soon after being started on DAG-NODE-B (reboots have made no difference). On DAG-NODE-A, it runs consistently.
Here’s what seems to me to be the most relevant output from the Application Log and the MSExchange Management Log on DAG-NODE-B, and from the Exchange Shell:
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:19 ESE 327 General "Information Store (3720) Mailbox-DB-02: The database engine detached a database (4, S:\Mailbox-DB-02\Database\Mailbox-DB-02.edb). (Time=6 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 6.188, [7] 0.156, [8] 0.016, [9] 0.015, [10] 0.016, [11] 0.031.
Revived Cache: 0"
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:19 ESE 103 General "Information Store (3720) Mailbox-DB-02: The database engine stopped the instance (4).
Dirty Shutdown: 0
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:19 MSExchangeIS Mailbox Store 9539 General The Microsoft Exchange Information Store database "Mailbox-DB-02" was stopped.
==================================================================================
DAG-NODE-B, MSExchange Management log
Information DD/MM/14 10:46:19 MSExchange CmdletLogs 1 General Cmdlet succeeded. Cmdlet Dismount-Database, parameters {Identity=Mailbox-DB-02}.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:19 MSExchangeRepl 3161 Service Active Manager dismounted database Mailbox-DB-02 on server DAG-NODE-B.company.corp.
==================================================================================
DAG-NODE-B, MSExchange Management log
Error DD/MM/14 10:46:20 MSExchange CmdletLogs 6 General Cmdlet failed. Cmdlet Get-PublicFolderDatabase, parameters {Status=True, Identity=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx}.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:21 MSExchange Assistants 9002 Assistants Service MSExchangeMailboxAssistants. Stopped processing database Mailbox-DB-02 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx).
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 10:46:21 MSExchange Assistants 9002 Assistants Service MSExchangeMailSubmission. Stopped processing database Mailbox-DB-02 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx).
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 10:51:08 MSExchange Search Indexer 104 General Exchange Search Indexer failed to enable the Mailbox Database Mailbox-DB-02 (GUID = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) after 10 tries. The last failure was: MapiExceptionMdbOffline: Unable to
get CI watermark (hr=0x80004005, ec=1142)
==================================================================================
DAG-NODE-B, MSExchange Management log
Warning DD/MM/14 11:06:44 MSExchange CmdletLogs 4 General Cmdlet stopped. Cmdlet Move-DatabasePath, parameters {Identity=Mailbox-DB-02, EdbFilePath=M:\Mailbox-DB-02\Mailbox-DB-02.edb, LogFolderPath=L:\Mailbox-DB-02\Logs}.
==================================================================================
DAG-NODE-B, Exchange Management Shell output
Processing data from remote server failed with the following error message: The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote
Management service is enabled. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OperationStopped: (System.Manageme...pressionSyncJob:PSInvokeExpressionSyncJob) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 11:23:42 MSExchangeIS Mailbox Store 1000 General Attempting to start the Information Store "Mailbox-DB-02".
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 11:23:43 ESE 102 General "Information Store (3720) Mailbox-DB-02: The database engine (14.03.0162.0000) is starting a new instance (4).
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 11:23:43 ESE 105 General "Information Store (3720) Mailbox-DB-02: The database engine started a new instance (4). (Time=0 seconds)
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:53 ESE 490 General "Information Store (3720) Mailbox-DB-02: An attempt to open the file ""S:\Mailbox-DB-02\Database\Mailbox-DB-02.edb"" for read / write access failed with system error 32 (0x00000020): ""The
process cannot access the file because it is being used by another process. "". The open file operation will fail with error -1032 (0xfffffbf8).
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:53 MSExchangeIS 9519 General "The following error occurred while starting database Mailbox-DB-02: 0xfffffbf8.
Failed to configure MDB. "
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:53 MSExchangeIS 9519 General "The following error occurred while starting database Mailbox-DB-02: 0xfffffbf8.
Start DB failed.. "
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:53 ExchangeStoreDB 215 Database recovery At 'DD/MM/2014 11:23:53' the Microsoft Exchange Information Store Database 'Mailbox-DB-02' copy on this server experienced a serious error which caused it to terminate its functional activity.
The error returned by the remount attempt was "There is only one copy of this mailbox database (Mailbox-DB-02). Automatic recovery is not available.". Consult the event log on the server for other storage and "ExchangeStoreDb" events for
more specific information about the failures.
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:53 ExchangeStoreDB 231 Database recovery At 'DD/MM/2014 11:23:53', the copy of database 'Mailbox-DB-02' on this server encountered an error during the mount operation. For more information, consult the Event log on the server for "ExchangeStoreDb"
or "MSExchangeRepl" events. The mount operation will be tried again automatically.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 11:23:54 ESE 103 General "Information Store (3720) Mailbox-DB-02: The database engine stopped the instance (4).
Dirty Shutdown: 0
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:54 ExchangeStoreDB 231 Database recovery At 'DD/MM/2014 11:23:54', the copy of database 'Mailbox-DB-02' on this server encountered an error during the mount operation. For more information, consult the Event log on the server for "ExchangeStoreDb"
or "MSExchangeRepl" events. The mount operation will be tried again automatically.
==================================================================================
DAG-NODE-B, Application Log:
Error DD/MM/2014 11:23:54 MSExchangeRepl 3154 Service Active Manager failed to mount database Mailbox-DB-02 on server DAG-NODE-B.company.corp. Error: An Active Manager operation failed. Error The database action failed. Error: Operation failed with message:
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-1032)
==================================================================================
NOTE:repeat events similar to some of the above continue until Exchange eventually manages to mount the database:
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:56 MSExchangeIS Mailbox Store 1000 General Attempting to start the Information Store "Mailbox-DB-02".
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:56 ESE 102 General "Information Store (3720) Mailbox-DB-02: The database engine (14.03.0162.0000) is starting a new instance (4).
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:56 ESE 105 General "Information Store (3720) Mailbox-DB-02: The database engine started a new instance (4). (Time=0 seconds)
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:57 ESE 326 General "Information Store (3720) Mailbox-DB-02: The database engine attached a database (5, S:\Mailbox-DB-02\Database\Mailbox-DB-02.edb). (Time=0 seconds)
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:57 MSExchangeIS Mailbox Store 10056 General Patch all ID counters for database Mailbox-DB-02.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:57 MSExchangeIS Mailbox Store 1133 General Allocating message database resources for database "Mailbox-DB-02".
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:58 MSExchangeIS Mailbox Store 9523 General "The Microsoft Exchange Database ""Mailbox-DB-02"" has been started.
Database File: S:\Mailbox-DB-02\Database\Mailbox-DB-02.edb
Transaction Logfiles: R:\Mailbox-DB-02\Logs\
Base Name (logfile prefix): E03
System Path: R:\Mailbox-DB-02\Logs\
(Start Duration=00:00:01.844) "
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:15:58 MSExchangeRepl 3156 Service Active Manager successfully mounted database Mailbox-DB-02 on server DAG-NODE-B.company.corp.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:16:06 MSExchange Assistants 9001 Assistants Service MSExchangeMailSubmission. Started to process mailbox database Mailbox-DB-02 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx).
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:16:09 MSExchange Assistants 9001 Assistants Service MSExchangeMailboxAssistants. Started to process mailbox database Mailbox-DB-02 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx).
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:16:12 MSExchange Assistants 9017 Assistants Service MSExchangeMailboxAssistants. Managed Folder Mailbox Assistant for database Mailbox-DB-02 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) is entering a work cycle. There are 125 mailboxes on
this database.
==================================================================================
DAG-NODE-B, Application Log:
Information DD/MM/2014 12:16:30 MSExchange Search Indexer 108 General Exchange Search Indexer has enabled indexing for the Mailbox Database Mailbox-DB-02 (GUID = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx).
==================================================================================


If you used the steps outlined in this TechNet article - http://technet.microsoft.com/en-us/library/dd979782.aspx - then you should have been OK. I will say that I read one
article that said to work one database at a time, then when you are sure it is operational to go back and do the next, etc.
(I also assume by your shorthand at the beginning of this document that you performed the tasks on the active node when you did this work. If so, that's the best way to do it, so if it failed, it wasn't because you used the wrong steps or did them
on the wrong system.)

Log and transfer clip setting over clip #100 +

When I selected all clips on log and transfer, they stop at Clip #99. It could not transfer more than #100. I had to rename to a, b, c, etc. Is there any preferance settings to accept over #100? I want to keep them in order.

All cards start with #1? I don't see "#1" anywhere.
I see the clip names, like 0001MS, 0002Z8 and so on. And VOLUME NAME is the name of the card or name of the folder you put the card in. The second card MIGHT start again with 0001, but have another code, like "0001GU, 0002B2" and so on. Because that it the first one on that card. IF a shot spanned from one card to the next, the number scheme would continue, like you are seeing. 0057HW, 0058J9, something to that effect.
This is the way P2 names clips, and there is nothing you can do to change this. Import them, and then rename them...fine.
Are you saying that it can't go beyond shot 100? 0100YU, but no 0101IK? P2 can go to 999.
Shane

No Log and Transfer??

Under files section I see and "log and capture" but no "log and transfer"....Im using a canon hf s100 and Im also new to this program, thanks

You didn't answer the critical question...what version of FCP do you have? And now that you mention the SD card, what is the footage type you are working with?
No LOG & TRANSFER seems to point to you having FCP 5 or 5.1...where the option was called IMPORT>PANASONIC P2, because it was designed for P2 only. Upgrade to FCP 6 made it work with all sorts of tapeless formats.
SD card indicates that you have a camera that possibly shoots AVCHD. And AVCHD support for FCP didn't arrive until FCP 6.
Shane

Log And Transfer Tutorial

I see info in the manual for Log and Capture but not Log and Transfer. Does anyone know where I can find a basic walkthrough of that?
Thanks
Robert

Robert,
Connect the device storing your P2 content to your machine through Firewire.
Open FCP>Go to main menu> Final cut pro>Easy setup> format:Panasonic DVCPRO HD> Use (choose as appropriate).
Open new project.
Create a bin>name it as appropriate>control click it and choose set logging bin.
Now go to main menu>file>Log&transfer.
Your P2 content should automatically appear on the Log&transfer window
you can either change the file's name now or do that after transfer.
Select the files you want to transfer and drag the selected files onto the "Add selection to Queue" button or directly onto the space below.
Transfer starts and you can see 1 by 1 your media transferring onto your logging bin in the browser.
g

Mdworker, system.log, and VLC Media Player

I downloaded some small videos from Google video that were originally from a digital camera but downloading them from google saved them as .mp4 supposedly ipod format. They seem to play fine with VLC Media player however I noticed 2 things while playing them.
1) The mdworker process loaded down my cpu to about 130% usage for an extended period of time even after closing VLC. From my understanding mdworker is a process usually used by spotlight for indexing? Then why would this process be running? I unmounted all of my external drives and spotlight didn't show that it was indexing anything.
2) I saw the syslogd process come up in Activity Monitor so it reminded me to check the system.log and I found the log was filling up with entries that look like they are from VLC Media Player. The log is currently over 300MB should I clear it out now or just wait for the maintenance to take care of it?
Here is part of the log:
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113386026144; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113520243872; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113520243880; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113654461608; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113654461616; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113788679344; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113788679352; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113922897080; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54113922897088; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54114057114816; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54114057114824; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54114191332552; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54114191332560; outside of file
Jan 31 14:19:37 Macintosh-2 [0x0-0x320320].com.apple.quicktimeplayer[16987]: OQT_MovieImport: fseek_store: tried to seek to 54114325550288; outside of file
Jan 31 14:19:37 Macintosh-2 com.apple.launchd[77] ([0x0-0x320320].com.apple.quicktimeplayer[16987]): Exited: Terminated
Jan 31 14:20:39 Macintosh-2 com.apple.launchd[1] (0x40b580.mdworker[16984]): Exited with exit code: 1
Jan 31 14:24:43 Macintosh-2 mdworker[16998]: (Error) Import: Importer force killed!
Jan 31 14:24:43 Macintosh-2 com.apple.launchd[1] (0x40b580.mdworker[16998]): Exited with exit code: 1
Anyone have any ideas?
George

Encase anyone is interested I got the original AVI videos and had no problems playing them. The CPU was less than 20% and the daily maintenance cleared out the logs. So I guess it was just a strange conversion problem I got from downloading google videos.
George

How much of logging is too much of logging?

Hi All,
OK, that was my question, how much of logging is too much of logging?
Recently one of my co-worker (not me, not me at all) had written about 100 classes and after getting the framework right, he has now been asked to log all those bunch of classes and methods.
He is damn bored and fed up with logging and he needs to log it in a ratio of 1 line of logging per 10 lines of code (approximately). And he also must log "ENTERING", "EXITING" in each method whenever he enters and exits a method.
I personally like to log as little as possible, although we don't log everything in INFO and we do log a lot of things in DEBUG logging level, logging every method doesn't feel correct to me.
And I hate too much of logging because to me it makes the code unreadable. Many of you will disagree this point, but I feel the important log statements often get messed up with those "ENTERING" and "EXITING" kind of log statements.
And another question, when is the right time to log? Logging as and when we are writing the code or logging it after everything is done (like how the pure dude is doing now). The former seems to be the better.
Your thoughts??
Thank you

Hi All,
OK, that was my question, how much of logging is too
much of logging?Too general for a one size fits all answer.
And he also must log
"ENTERING", "EXITING" in each method whenever he
enters and exits a method.Sounds fine, especially if it logs the parameters passed to the method, as well as what it returned (if not void) or if it returned via exception.
>
I personally like to log as little as possible,
although we don't log everything in INFO and we do
log a lot of things in DEBUG logging level, logging
every method doesn't feel correct to me.It's reasonable. During development, logging may be very verbose, but it can be useful. During production, you can configure the logging to not log at the DEBUG level, so you wouldn't see these log messages anyway and it shouldn't impact performance enough to be a concern.
And I hate too much of logging because to me it makes
the code unreadable. Many of you will disagree this
point, but I feel the important log statements often
get messed up with those "ENTERING" and "EXITING"
kind of log statements.This is a perfect fit for AOP (Aspect Oriented Programming). Rather than clutter the code with these log messages, these can be "woven" into the bytecode at compile-time or run-time.
Aspect-J is one popular AOP framework.
http://www.eclipse.org/aspectj/

Exception.log and mail.log stopped logging (MX7)

Similar Messages

Maybe you are looking for