Exception message 62 - Master Data Inconsistant

I'm getting the referenced exception message when generating an MRP run with scheduling value of "lead time scheduling and capacity planning". I've done consistency checks on all master records - routings, work centers, etc - and all have come back clean. Anyone have any idea why this may be happening?
Thanks!
Bob

Hi,
62 Scheduling: Master data inconsistent Check master data !
Remove "In House Processing Time" from the Material Master MRP2
view. Ensure that the Production Version & Routing are correct. Run
MPS/MRP manually once corrected.
Regards
Sunil

Similar Messages

Possibility of combining exception broadcasting with master data bursting

Hi Experts,
We have a scenario where it is required to combine exception broadcasting with master data bursting.
As per my understanding if you choose broadcast method as 'exception broadcasting', there is no option for choosing 'master data bursting'.
Am I missing something or Is there a workaround or some method to achieve the same.
Thanks
Rajeev

Hi,
62 Scheduling: Master data inconsistent Check master data !
Remove "In House Processing Time" from the Material Master MRP2
view. Ensure that the Production Version & Routing are correct. Run
MPS/MRP manually once corrected.
Regards
Sunil

62: Scheduling: Master data inconsistent in MD04

Dear all experts,
I am new in PP. After i run MRP and i go to MD04 . Noticed that, 1 message is shown as below
62: Scheduling: Master data inconsistent
I have checked Routing and BOM and they are correct.
I am using ECC 6
Any solution on this issue?
Thank you.

Dear cijelew,
I dont think there is problem with configuration setting,but it's with
1. BOM validity date,BOM status.
2.Check if any change numbers are used with release key and ensure the release key is set.
3.Routing status,usage,validity and also
check if BOM selection method is value 2 or 3(production version--->so check whether production version has been created
properly,lot size,validity date,check where you have assigned the routing group and group counter whether is it against
detailed planning,rate based planning or rough cut planning).This routing assignment should be against the correct planning
level as per the configuraion setting made in OPU5,for the selection ID.
Check and revert.
Regards
Mangalraj.S

Exception message 30 & Reschedule date

Hi All,
This is about the exception message 30 which is displayed in MD04 and the rescheduling date.How is this date determined and what does the exception message signify. how the system determines this dates?Also, what is the criteria for this rescheduling date to be displayed in MD04?
For Ex
Material XYZ , MRP Type : PD, Lot size :Monthly,PIR is 100 for march, After MRP run I am getting reqmnt date is on 1st April. Reschedule dt is 02-March, Expn Msg is 30. Inhouse production is 1 day & GR time is 2 days.
Please let me know how system arrives on 2 march as rescheduled date & what does it mean?
Thanks and regards,
Kundan Kumar

Dear,
Within this rescheduling horizon, the net requirements calculation checks whether, after a requirement, a firmed receipt exists, which can be used to cover this requirement. Then the system displays a rescheduling date as well as the exception message Bring process forward for this receipt. The net requirements calculation then uses this receipt and the system will only create another procurement proposal if the receipt quantity is not sufficient to cover the complete requirement. Several firmed receipts can be used to cover one requirement.
The rescheduling horizon is always calculated from the MRP date.
Please refer this link,
[Exception message 30 |exception 30]
Have you assigned a range of coverage profile to the material?
Regards,
R.Brahmankar

Exception message

hi
I have only one planned order with Exception message 62 i.e. master data inconsistent and all other planned orders of this material are having no exception message.
I am running MRP again with planning mode = 2
but still exception message is not going.
Amit

Hi,
You said that for the same material , you have some other planned orders into which the routing is transferred - right?
so , pls change the order start date of this planned order with the start date of those problem free planned orders and try to schedule this planned order again. If now, this planned order gets scheduled and routing is transferred /Det sched tab is added , then we can conclude that the problem is with the validity date only.
pls check

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Deleting a record from Master data

Hi all,
I need some help with deleting a record from the master data.I did go to the master dta maintenance screen and selected the record to be deleted. I saved it. I received the message, "master Data record cannot be deleted".
I then went into transaction slg1 to check for the details of the record. A message stating " Master data record XXX is being used in the cube /BIC/Dzzzyyy312.
This record is no longer needed by the end user and was requested to be deleted. Could some one tell me if there is a possibility to delete this unused masterdata record. Your suggestions are appreciated.
Regards!

Hi Sumana,
Check this...Similar Post..
MAster data deletion throws a dump
Hope it helps
Srini

Deleting Master Data

Hi All,
I am trying to delete master data in a process chain.
But its not working , the chin is executing but the function module RSDMD_DEL_MASTER_DATA is retuning the message " No master Data was Deleted".
Please suggest how to fix this.
Appreciate help,
Deepthi

Hi Deepthi
Before deleting the master data.have look at transaction data like any dependency data is there r not.If the the trans action data is present then u can just delete that thing then only u have the option of deleting the master data in case of process chains.if any let me know.If my answer is useful dont for get to assign points.
Best regards
RK
Assigning is the only way of saying thanx in SDN*****

Master Data Services Add-in for Excel Issue

I am trying to configure MDS in the Production server. I am running into isssues.
(I was able to do the whole process successfuly in my local system - Versions are same in the local and server - Only difference is local machine is windows 7 server is Windows 2008 R2)
I have installed SQL server 2012 Enterprise Version SP1. I am able to browse the MDS URL. User has got full permissions. When I try to access the MDS via Excel I get the below error.
Can any one help me please I have spent days on this withou any joy.
Error message
TITLE: Master Data Services Add-in for Excel
An error occurred while receiving the HTTP response to
http://MYIPADDRESS/mds/service/service.svc/bhb. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See
server logs for more details.
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (System)
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
An existing connection was forcibly closed by the remote host (System)
BUTTONS:
OK
Bn

I have finally found a solution for this problem! Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
after much aggravation, I have finally found a solution:
Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
Press the Start button (Windows button)
In the search bar type “REGEDIT”
Open regedit.exe
A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
In the Registry Editor expand HKEY_CURRENT_USER
In the HKEY_CURRENT_USER folder, expand in the following order: Software -> Microsoft -> Office -> Excel -> Addins
Select Microsoft.MasterDataServices.ExcelAddIn
Double-click on LoadBehavior in the right panel
In the Edit Value popup, change the value to
Press OK
Exit the Registry Editor
The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0. If that occurs simply follow these steps so the add-in will be active when Excel starts up.
I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
Cheers!
Tony

How to Delete permanently an entry from an Infoobject - Master Data

Hi All,
I want to delete a entry = 014 in Infoobject = data provider since it is no more needed. **
When I go to this Infoobject-> Maintain master data anddelete it, a message Pop’s up
When I Check using Tcode SLG1, I see
When I check in SID table of the Infoobject, I see below.
How do I delete it? Please help.
**I need to delete it since we no more required this and we have created a new data provider (286) instead of this and the old one still appears in the reports :| with no data.

Hi,
fallow the below steps while delete the master data.
RSA1 --> find your Info object --> right click --> maintain master data
Select rows you want to delete and click 'Delete' icon. Then SAVE.
If system prompt you message "some master data cannot be deleted"
Then goto tcode SLG1 --> enter Object: RSDMD and Subobject: MD_DEL and User: your userID and press F8.
In the next screen Expand node and double click 'Problem class additional information'
This will give you which ever objects using SIDs of this master data.
You should delete this SID according to that list.
find the below doc.
http://scn.sap.com/docs/DOC-39857
Thanks,
Phani.

Exception message 10 and safety stock

Hello
When I have a ressource in the past (we have this case), and if the safety stock is not complet, the exception message is "10" (reschedulling in) without date.
Normaly the result should be exception message "15" (rescheduling out) with a date.
Why have I an exception message "10" without date ?
Is it the custo, but I found nothing ?

Hi Christian,
I've seen this myself, and believe that it happens only if you allow start in the past and have got insufficient coverage for safety stock.
I guess it doesn't have a date because of the start in the past, which will set availability date even today. Try to change the "start in the past" indicator, and see what happens.
Regards,
Mario

Exception message in MD04 & MD05

Hi experts,
There is an problem related to exception message,
It has been observed that immedeate after MRP run, no other transactions done, I am getting exception message in MD05 for one of the component as "30 - Plan process according to schedule", and the same i am not getting in MD04. What could be the reason for same.
Note: No transaction done after MRP
Regards,
Lodhi.S

Hi,
Please follow the given below link.
exception message 30 & Reschedule date
Regards,Kundan

Exception Messages Report / List

I have been unable to locate an exception messages report, either for production orders, requisitions, or purchase orders. I am looking for a report that will contain all of the exception mesages.
Ideally, the output would be something like:
1.   WBS element (project)
2.   Material number
3.   Material Description
4.   Make or buy code
5.   Recd. / Reqd. Quantity (This would be the qty affected by the exception message)
6.   Date (e.g. date on which the material is currently expected to be received)
7.   Purchase order or work order #
8.   Purchase order line #
9.   Purchasing group
10. MRP Controller
11. Exception message Number
12. Exception message Description
13. Re-Scheduling date
14. Various additional MM fields
I have requested the report, but I am told by my IT group that the exception messages do not reside in any table, so they cannot be retrieved, much less exported to excel, so a list of teh applicable tables/fields would also help.
I assume that this issue has been raised and solved many times, since SAP is not new and my request not unique.
I welcome any suggestions.
Thank you.

HI,
Why dont you try to list the messages in SE91 and by giving the application area.
Thanks & Regards,
Kiran

MRP Exception messages difference

Hi PP Gurus
I need to understand the exact difference between few exception messages
MRP Exception message 6 - Start date of supply proposal is in past
MRP Exception message 7 - Finish date of supply proposal is in past
Query : Does it means that if start date is in past & finish date is in future , then only EM6 will appear .If both are in past , then EM7 will appear ???
MRP Exception message 10 - This is meant for Rescheduling IN i.e. if the supply proposal finish date is later than reqt date
MRP Exception message 15 - This is meant for Rescheduling OUT in i.e. if the supply proposal finish date is eariler than reqt date
MRP Exception message 30 - Plan process according to schedule i.e. pull or push the supply proposal as per reqd date
It looks to me that
EM30 is same as EM10 & EM15 since the former also suggests to pull or push as the latter two does .Then what is the exact difference between these
rgds
sandeep

1- I'm not sure, but could be.
2- Difference between 10, 15 and 30 is that 10 and 15 are for firmed elements (like production order or purchase order); 30 is for planned order (or other NOT FIRMED element) that cannot be properly planned because of LT problems.

Master Data Deletion problem

Hi
i am trying to delete master data for 0STRGE_BIN,ZSUTYPE..i am getting this message:Some master data cannot be deleted.if i say ok then ok this message is coming.The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL ). may i know the reason.
Thanks in Adavance.
Regards
Gona

Hi, In your case your Master data or the master data attributes (if present) are getting used in Some info Cube (or data target).
What you can do, go to the object, then click on the "where used". This will give you the detail of the targets where your Object is still used.
Either remove this Object from The cube or just delete the data of the cube you will be able to delete the complete master data once again.
Note: Please load the master data first and then load the cubes(Transactional laods).
Hope this helps you.
Regards.
Soumyadeep.

Exception message 62 - Master Data Inconsistant

Similar Messages

Maybe you are looking for