Exception message in MD04 & MD05
Hi experts,
There is an problem related to exception message,
It has been observed that immedeate after MRP run, no other transactions done, I am getting exception message in MD05 for one of the component as "30 - Plan process according to schedule", and the same i am not getting in MD04. What could be the reason for same.
Note: No transaction done after MRP
Regards,
Lodhi.S
Hi,
Please follow the given below link.
exception message 30 & Reschedule date
Regards,Kundan
Similar Messages
-
Material/Location specific exception messages of MD04
Hi,
Any pointers to get a report of all exception message in for specific material,plant combinations so that those can be targeted for correction .
i.e. In MD04 for a material at location we can see the exception messages ,do we have any table or report to get a consolidated messages so that one need not to load each and every product in MD04 .
I am not looking for a MD06 or table of standard list of MRP messages.
Regards,
DigambarHi,
Your question is not clear; MD04 is a dynamic report, meaning that it's content cannot be read from a database table (at least not all of it).
The static alternative (in my opinion even better for exeption massages) is the MD05 MRP list. It exists in the database, and so can be read and processed in the way that you want.
By the way, both have also BAPIs to be used.
So, what is that you are in need of?
Regards,
Mario -
MRP - want to create query for Exception message number (MD04)
Dear all MM kings
consider i had one purchase against xxxx material , if i go to MD04 In Exception message number column i got massage number 20 Cancel process, now i want to know how many purchase order exist in system having the Exception message number 20
i want to define query for Exception message number 20
is there any way to do the sameHi,
There are links on the first thread on this MM board that describe how to produce a query.
But if you have not done this before and have no ABAP experience, you might find it a bit tricky.
You need someone to find the tabkle that stores the MRP lists and see if this contains the exception message, first.
the structure I gave you is probably built dynamically by the program and so may not be available for a query.
One simpler option is to use the "Collective access" tab in MD04. here you can enter an MRP controller etc. and get a list of materials. You can then find out which of the 8 numbered columns contains the exception message 20 and then sort the list in this sequence (the exception messages are linked to one of the columns and this can be different in every implementation and so I can't tell you which one it is)
This will not just get the "20" messages unless they have been configured to use a separate column, but at least it is avail;able now without config and may be enough for your purposes.
Steve B -
Dates and Exception message in MD04
Hi all ,
When i view in MD04 t-code for one purchase order the system shown the below exception message
Exception 30 = Plan process according to schedule (08/01/10/07/25/10)
06 = Start date in the past
I cant understand the dates inside the braket . We are following the factory calender all days working days (No holidays)
When i calculate the no of days between 07/12/2010 and 08/11/2010 it is more than 28 days (the date format is ( MMDDYYYY)
Can anybody explains why it is happened?
Delivery date D 08/11/2010
Req. date 07/12/2010
Release date 07/12/2010
Plnd dely time 28
GR proc. time 7Hi,
Refer to Mr. Rajesha's reply in the below thread, it should clarify your doubt, else revert
exception Message 30 "Plan process according to schedule"
Regards,
Vivek -
Hi team,
My entire MRP planning is being carried out in APO system. My R/3 system just receives the planned orders from APO & i will convert the planned order to production order (MASS). Hence i did NOT maintain any configuration in OMDW for my plant. Is this OK or should i maintain OMDW for my plant in R/3 even though my planning is happening in APO?
ThanksHello Sugan
If the entire planning is made on APO and if you don't controll the rescheduling messages in MD04 or MD05, then it's not necessary to maintain OMDW.
BR
Caetano -
Exception Message in MD04.
I got the following Exception message for a planned order in MD04,
20: Cancel process
After getting help for this, system is giving the dignosis that,
"There is no requirements for this receipt. It should be reversed to avoid unnecessary warehouse stock."
What this means?
Regards,
DevenHi Deven,
Please check the dates in the planned order. This could be before that of the date of requirement.
i.e. If there is no requirement before the date of the planned order then system will propose to cancel the proces...since as per system there is no requirement & hence no need for a planned order.
To check pass a requirement /PIR before that date & then this error will not be displayed.
Regards,
Senthilkumar -
GR processing time not taken into account for exception message in MD04
Hello Gurus!
In MD04 when we toggle between displaying at GR date and AV date sometimes there is a shortage in AV date view but none in GR date view due to GR processing time.
How can we include the GR processing time to be taken into account so that an exception message is shown for the shortage during AV view?
Thanks in advance!
-AlvinHi There
What you meant by shortage,,,
AV- Available date,
GR- Availble date+GR processing time
if you have not set up the GR processing time in Master, it may come as ZERO days,, so AV and GR date may be same,,
if this is not your quesry, please provide more details on your query,,,
Thanks
Senthil -
Regarding Exception Messages in MD04
Hi Gurus,
Can any body explain what's the main scenario where we get 'Exception message 30' i.e. Plan the process according to Schedule?
Is there any standard report which will display all the firmed planned/prod.ord based on MRP controller?
Helpful answers will be rewarded with points,
Thanks,
SekharHi,
If your order start date of the planned order lies in past and the order start date in past indicator is not allowed in OPPQ the system automatically switches to forward scheduling taking todays date starting date of the planned order. In this case the system issues a exception message 30 Plan process according to schedule.
System Current Date : 14.07.2007
Reqmts date : 01.07.2007
Planned order start date : 14.07.2007 with exception message 30 .
If order start date in the past indicator is not allowed during MRP Run the system creates planned order on 14.07.2007 with exception message 30 plan process according to schedule since your reqmt date is 01.07.2007.
If the order start date in the past indicator is allowed in OPPQ during MRP run
the system creates planned orders on 01.07.2007since the reqmts date is 01.07.2007.
Regards,
nandha -
User exit/BAdI to manipulate display (MRP) Exception messages
Dear,
I wonder if there is a user exit/BAdI or implicit enhancement with which I can manipulate the display (or not) of (MRP) Exception messages in MD04/MD07.
In customizing of the Exception messages (table V458A) there is the indicator No exception message (V485A-ASNOT) but if this indicator is ticked, the Exception message is never displayed;
My client wants this message only not to be displayed in case the Material is of a certain Material group.
In all other cases, the Exception message should be displayed.
Thanks for any clues!
Kind regards,
BartHi Bart
There is no exit or BAdI to manipulate exception messages in MRP. See the following note:
1697703
MD04/MD05: Change or create new exception messages
You can find a list of the most relevant BAdIs available for MRP on the following document:
BAdIs for MRP
BR
Caetano -
Purchase order exception messages
hi all,
i want to know the table and field name of purcahse orders linked with PO exception messages in MD04
Transaction
thanks in advance..
sathish..HI,
check the table PRON with matnr and werks will do i hope.. -
HI all
Can any one tell me waht is used of exception message in md04?
thx in advance
SurendraHi Surendra
Exception messages are generally useful to initimate / inform u of any discrepancy arised during any transaction related to planning i.e. for eg EM like start date in past, messages related to BOM etc
Based on exception messages, you can easily change any materials which requires to be reprocess manually.
They EM's are maintained under groups. These groups are defined in SPRO > Production > MRP > Evaluation > Exception groups
Under these groups there are individual EM's which u can view from MD06 also
Rgds -
Issue in MD04 transaction with exception message 26
Dear All,
I am facing 2 issues:
1) Even if the sales order line is confirmed and fulfilled, we are getting the stock for that material against the same sales order in the MMBE Transaction.
2) For the above material present in those sales Order which are confirmed and fulfilled, We are getting the entries for that material in Transaction MD04 ( Stock requirement list of the material after we run the MRP for a particular materia) with the exception message 26.
From our end, we have used the report sdrqcr21 which delete the wrong entries from "VBBE" so that MD04 will show incorrect entries but this approach is not helping us in the above situation.
Regards,
RakeshRakesh,
This is one issue. There is nothing wrong with the software, this is standard behavior. You have built or procured more stock than was required by the sales order. The remaining unnecessary stock is now sitting in inventory, and is displayed in MD04 under the Sales order segment. This stock can never be used again within SAP, unless someone re-opens the sales order or performs some transaction to remove the stock from being 'Sales order on hand' stock.
Some companies will scrap this material, using their standard scrapping policies. Others will transfer this un-usable E stock to general stock, if it can actually be reused.
Rgds,
DB49 -
Exception Message 10 / 15 in MD04 ????
Hi
In what cases do we get exception message 10 & 15 in MD04?
Say i have a S.O which is to be deliverd on 30.12.2008.
My planned delivery time is 90 days, purchasing processing time is 3 days and GR Processing time is also 3 days.
In addition i need to keep 10 days of opening period also (as mandatory) in Schedul Margin Key....I do forward scheduling
Now whenever i run MRP (with MRP Control parameters as "create purchase requisition in opening period"); system always gives error 10? Is it linked to this opening period?
I mean to say; is there any generalized thumb rule to understand that under what circumstances this error appear?
Please give your valuable suggestions and get rewarded.....
RgdsHi,
During MRP the system carries out Rescheduling check automatically. No Tcode is reqd.
Rescheduling check is to change the dates of already existing firmed receipts
which were not planned on the same day as the requirements day to suit the
requirement.
For this we need to define a rescheduling horizon.
Rescheduling horizon defines the period for bringing the receipts that should be
taken into account for rescheduling.
There are two process
1.Reschedule in - Bringing the process forward Exception message 10
1. Within the recheduling horizon the system checks whether after the
requirement a firmend receipts exists which can be used to cover this
requirement.
2. Then the system displays the message Bring the process forward and
exception message 10
3. The net requirement calculation uses the receipt and the system will create
new procurement proposal only if there is any shortage.
4. For this we need to define a tolerance value for bringing the process in
tcode OPPQ /OPPR
The system checks compares this value with the difference between order
finish date- Reqmts date.If this difference is more than the tolerance value
the system issues the message for the MRP element to bring the process
forward if the reqmts date lies before the firmed receipt element date.
5. Same process for Postponing the process Exception message 15.
In OPPQ you have defined the tolerance value say 2.
The difference between order finish date and reqmts date is say 4 days.
Then the system compares the tolerance value(2 days) with this 4 days.
since this 4 days is greated than tolerance value the system decides that the order proposals nedd to be rescheduled.
Then system checks whether it is bring the process or postpone the process.
If the reqmts date is before the order finish date then the system issues exception message 10 Bring the process forward.
If the reqmts date is after the order finish date then the system issues exception message 15 post pone the process.
Regards,
nandha -
How exception message triggered in MD04
Dear Sir/Madam,
How exception mesage " Excess Stock" triggered in MD04? I like to trigger such scenaior inorder to have that exception mesage "Excess Stock" in my test system.
Please advise.
Thanks.
Rgds,
Esther ChongHi,
Just a modification to Mr. DB49's input. Increase the stock of the account assigned material to the needed qty & system will put an exception message '26' for the production order.
Eg:
Date MRP ele MRP element data Mrp excep receipt av. qty
2010/01/05 ProjSt 20xx.0001.02 15 15
2010/01/25 PrdOrd 0000129365/PP01 26 15 30
2010/01/25 IndReq VSFB 15- 15
Regards,
Vivek -
MD04 - Exception Message 20 = Cancel Process
After MRP Run through MD02. Then in MD04 screen after firming the planned order, it has an expection message 20 .
How to correct this. What are all the implecations if I convert it to production order.
With best regards,
jkHi Jayachandrasekhar ,
The Exception message 20 indicates that the planned order is a unwanted one.
As you have firmed that order system could not delete that while the MRP run.
For any reason you need to have order leave as such, else remove the Firming indicator and run MRP again, the order will get deleted or rescheduled ( depends on the rescheduling check settings).
Reward points if useful.
Thanks & regards
Mahesh
Maybe you are looking for
-
How do i install windows 8.1 onto my iMac late 2013
how do install windows 8.1 onto my late 2013 imac. i have no prior windows uploaded onto my imac and i would like to download windows 8.1 without having all these problems that everyone else is seeming to have.
-
HT1338 I have a new mac and I want to get mountant lion, my Q is how I get it free?
I have a new mac and I want to get mountant lion, my Q is how I get it free?
-
How is TOTAL RMS different than AVERAGE RMS
I create spoken-word recordings. One company that I work with specifys that the recording should be at a level that measures between -23 RMS and -18RMS. It appears that audio editing programs label their RMS readings in various ways. I had been us
-
Try many times to answer the security question after that i get msg say ( this apple id is now locked)
-
[SOLVED]Skype : error while loading libjpeg8
Hi, I have just installed archlinux (a few days ago) and all the softwares I need without any problem. Skype firstly worked fine but after a reboot, I couldn't run it. When I try to run it in terminal, I have the issue /usr/lib32/skype/skype: error w