Exception message number missing in EXIT_SAPLM61R_001

Hello experts,
I am using EXIT_SAPLM61R_001 for MD04 but in parameter IMDEZEXIT, the info of the Exception message number (AUSKT) and Exception message key (AUSSL) arer empty, although the line I'm debugging has an exception.
Does anubody know why??
Thanks!

Hi,
declare a constant and give value which u r maintaining in SE91,message class.zwm..and now instaed of goving the message from message class..try to give with constant./
message w001 with c_message..
Try it out if it works
Regards,
Nagaraj

Similar Messages

MRP - want to create query for Exception message number (MD04)

Dear all MM kings
consider i had one purchase against xxxx material , if i go to MD04 In Exception message number column i got massage number 20 Cancel process, now i want to know how many purchase order exist in system having the Exception message number 20
i want to define query for Exception message number 20
is there any way to do the same

Hi,
There are links on the first thread on this MM board that describe how to produce a query.
But if you have not done this before and have no ABAP experience, you might find it a bit tricky.
You need someone to find the tabkle that stores the MRP lists and see if this contains the exception message, first.
the structure I gave you is probably built dynamically by the program and so may not be available for a query.
One simpler option is to use the "Collective access" tab in MD04. here you can enter an MRP controller etc. and get a list of materials. You can then find out which of the 8 numbered columns contains the exception message 20 and then sort the list in this sequence (the exception messages are linked to one of the columns and this can be different in every implementation and so I can't tell you which one it is)
This will not just get the "20" messages unless they have been configured to use a separate column, but at least it is avail;able now without config and may be enough for your purposes.
Steve B

MRP Exception Message Number

I need to write an ABAP report which uses the details on the MD04 Stock Requirements List detail screen for those items which have an Exception Message number (10, 20,30 etc..). The screen shows this data is held in a structure called MDEZ. I have tried performance tracing and ABAP debugging but can't find the actual database table where this data is held.(I'm a newbie).
Can anyone help with the relevant table name or appropriate function module?

Check form AUFBEREITUNG_ANZEIGE in main program SAPMM61R, include MM61RF40 in particular - forms aufbauen_mdpsx & mdezx_aufbauen.
They use 2 FMs to retrieve data, but these FMs require proper values to be passed in... so check all code in the form AUFBEREITUNG_ANZEIGE.
As an option - you may try to call this form like
perform AUFBEREITUNG_ANZEIGE(SAPMM61R). and then use field symbol, to access MDEZX.
assign ('(SAPMM61R)MDEZX[]') to <fs_mdezx>.
I hope this helps.

Exception Message number 30 and rescheduling date

Hi everybody,
This is about the exception message 30 which is displayed in MD04 and the rescheduling date.How is this date determined and what does the exception message signify. Further, it would be great if i can get any link on forward/backward scheduling and how the system determines the dates?Also, what is the criteria for this rescheduling date to be displayed in MD04?
Thanks and regards,
Deepthi.

Hi,
Exception Message 30 - Plan process according to schedule
say , if there is a PIR on 02.7.08 and a planned order to cover this reqmt is generated with Ord finish date as 05.7.08 , system will now throw an Exception Message - 30 with the rescheduling date as 02.07.08 to complete the order on the same day as that of the requirement say 02.07.08.
also , pls go thru the foll links
http://help.sap.com/saphelp_470/helpdata/en/55/6704a195d711d3b6fb0000e8359890/content.htm
http://help.sap.com/saphelp_470/helpdata/en/f4/7d294a44af11d182b40000e829fbfe/content.htm

Exception Message Numner in transaction MD04

Hello,
There is a field Exception Message Number on screen of transaction MD04.
On my report i need to display the exception message number for corresponding MRP data element.
Which tables do i need to access and the flow?
regards
Nishant
PS : points would be awarded for helpful answers

Hi,
Just a modification to Mr. DB49's input. Increase the stock of the account assigned material to the needed qty & system will put an exception message '26' for the production order.
Eg:
Date               MRP ele       MRP element data                                    Mrp excep      receipt         av. qty
2010/01/05     ProjSt     20xx.0001.02               15      15
2010/01/25     PrdOrd     0000129365/PP01          26     15      30
2010/01/25     IndReq     VSFB                                     15-               15
Regards,
Vivek

Exception Messages Report / List

I have been unable to locate an exception messages report, either for production orders, requisitions, or purchase orders. I am looking for a report that will contain all of the exception mesages.
Ideally, the output would be something like:
1.   WBS element (project)
2.   Material number
3.   Material Description
4.   Make or buy code
5.   Recd. / Reqd. Quantity (This would be the qty affected by the exception message)
6.   Date (e.g. date on which the material is currently expected to be received)
7.   Purchase order or work order #
8.   Purchase order line #
9.   Purchasing group
10. MRP Controller
11. Exception message Number
12. Exception message Description
13. Re-Scheduling date
14. Various additional MM fields
I have requested the report, but I am told by my IT group that the exception messages do not reside in any table, so they cannot be retrieved, much less exported to excel, so a list of teh applicable tables/fields would also help.
I assume that this issue has been raised and solved many times, since SAP is not new and my request not unique.
I welcome any suggestions.
Thank you.

HI,
Why dont you try to list the messages in SE91 and by giving the application area.
Thanks & Regards,
Kiran

SMBup quit. "An exception of class JSONException was not handled. The application must shut down. Exception Message: Parse Error: Expecting "{" or "[" at position 1. Exception Error Number: 1

After updating to Mavericks 10.9.2, our Canon printer would no longer scan & send to our iMacs & MacBook Pros. We downloaded & installed SMBUp. Still trying to get it to work with MacBookPros, but has been working with iMacs. Today, out of the blue, I got the following error message:
An exception of class JSONException was not handled. The application must shut down.
Exception Message: Parse Error: Expecting "{" or "[" at position 1
Exception Error Number : 1
Now I get that message every time I try to open SMBUp. Tried to download & reinstall application, but get this message on website:
Hmm, eduo.info isn't loading right now.
The servers that run eduo.info are having some trouble. This is usually just a tempoary problem, so you might want to try again in a few minutes.
(Have gotten that message for the last hour).
Help?

Hi,
Pls don't forget to reward points and close the question if you find the answers useful.
Eddy

I changed my apple id and everything works fine except message and face time. I cannot reactivate imessage and facetime shows my email to send and receive instead of my mobile number.

I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?

I apologize. I misread your statement.
The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages - Support - Apple

Is there a report to track the exception messages after a MRP run ?

We have a scenario at our client site where MRP run is not optimized to the fullest.
The planners are not trained on how to interpret those exception messages.
They are not trained on how to reschedule / expedite planned orders resulting from an MRP run.
Is there a report out in SAP that keeps track of
1) History of number of exception messages by type ( Expedite/Reschedule/Cancel)
2) History of number of exception messages that were acted on or ignored by the planner.
This is to create metrics on the usage of MRP exception reports by planners.
Appreciate your inputs..

Hi
The exception messages are dynamic and time dependant. You cannot have history of exception message.. If your user is feeling difficult to use standard MRP reports. Create a new report using a function module MD_STOCK_REQUIREMENTS_LIST_API
It gives all MRP data including exception messages.
Regards
Antony

Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks ahead

Hi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards,

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

Why am i not able to see the exception message?

i wrote an 'instead of insert' trigger on a view.
and there are some exception situations in which the insertion should be stopped. my trigger works correctly. i mean it implements its purpose. however, the message i am taking after the trigger execution is not satisfying. ( i am using iSQL*Plus as the editor.)
here is my trigger: (after trigger there is some extra explanation below.)
CREATE OR REPLACE TRIGGER DemandOfCourses_T1_II
INSTEAD OF INSERT ON DemandOfCourses
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
     cpc NUMBER;
     currentNum NUMBER;
stud1 NUMBER;
     stud2 NUMBER;
     prec     NUMBER;
exc1 EXCEPTION;
exc2 EXCEPTION;
BEGIN
     SELECT capacity
     INTO cpc
     FROM LimitedCourse
     WHERE course = :NEW.course;
     IF cpc IS NULL THEN
          cpc := 1000;
     END IF;
     SELECT COUNT(course)
INTO currentNum
FROM Registered
WHERE course = :NEW.course;
     SELECT COUNT(student)
     INTO stud1
     FROM Registered
     WHERE student = :NEW.student
     AND course = :NEW.course;
     SELECT COUNT(student)
     INTO stud2
     FROM WaitingFor
     WHERE student = :NEW.student
     AND course = :NEW.course;
     SELECT COUNT(hp.preCourse)
     INTO prec
     FROM HasPrereq hp
     WHERE hp.course = :NEW.course
     AND hp.preCourse NOT IN (SELECT course FROM CourseResult WHERE student = :NEW.student);
     IF (prec = 0) THEN
     IF (stud1 = 0) AND (stud2 = 0) THEN
     IF (currentNum = cpc) THEN
          INSERT INTO WaitingFor
          VALUES (:NEW.student, :NEW.course, SYSDATE);
     ELSE
          INSERT INTO Registered
          VALUES (:NEW.student, :NEW.course);
     END IF;
     ELSE
     RAISE exc1;
     END IF;
     ELSE
     RAISE exc2;
     END IF;
     EXCEPTION
     WHEN exc1 THEN
          RAISE_APPLICATION_ERROR (-20002, 'Already registered for this course.');
     WHEN exc2 THEN
          RAISE_APPLICATION_ERROR (-20003, 'First the prerequesite course(s) must be taken.');
     WHEN NO_DATA_FOUND THEN
          NULL;
END;
for eample, if i want to insert the row below:
INSERT INTO DemandOfCourses VALUES (100005, 'BAK127', 'REGISTERED');
-- 100005 : STUDENT ID
-- BAK127 : COURSE CODE
-- REGISTERED : SITUATION
when i run this insert comment, i receive this result:
1 row created.
Actually, it should not insert anything. and it is not inserting anything. i mean, it is working correctly. however, i want it to write my exception message: "-20003, 'First the prerequesite course(s) must be taken.'"
why cannot i see my expected exception message?
all the data and structure is certainly true. if you have a question about them, i can answer.
by the way, i will catch this exception from my java code. what should i do in this situation?
any help will be appreciated.
regards

Hi,
i don't understand your logic.
See, I added output to trace the counters value :
SQL> drop table courses cascade constraints;
Table dropped.
SQL> CREATE TABLE Courses (
2 code VARCHAR2(15),
3 name VARCHAR2(40) NOT NULL,
4 credit NUMBER(2) CHECK (credit BETWEEN 1 AND 20),
5 PRIMARY KEY (code)
6 );
Table created.
SQL>
SQL> drop table LimitedCourse;
Table dropped.
SQL> CREATE TABLE LimitedCourse (
2 course VARCHAR2(15),
3 capacity NUMBER(3) NOT NULL,
4 PRIMARY KEY (course),
5 FOREIGN KEY (course) REFERENCES Courses(code)
6 );
Table created.
SQL>
SQL> drop table Registered;
Table dropped.
SQL> CREATE TABLE Registered (
2 student NUMBER(6),
3 course VARCHAR2(15),
4 PRIMARY KEY (student, course),
5 --FOREIGN KEY (student) REFERENCES Students(studentID),
6 FOREIGN KEY (course) REFERENCES Courses(code)
7 );
Table created.
SQL>
SQL> drop table WaitingFor;
Table dropped.
SQL> CREATE TABLE WaitingFor (
2 student NUMBER(6),
3 course VARCHAR2(15),
4 regisDate TIMESTAMP NOT NULL,
5 PRIMARY KEY (student, course),
6 --FOREIGN KEY (student) REFERENCES Students(studentID),
7 FOREIGN KEY (course) REFERENCES Courses(code)
8 );
Table created.
SQL>
SQL> drop table HasPrereq ;
Table dropped.
SQL> CREATE TABLE HasPrereq (
2 course VARCHAR2(15),
3 preCourse VARCHAR2(15),
4 PRIMARY KEY (course, preCourse),
5 FOREIGN KEY (course) REFERENCES Courses(code),
6 FOREIGN KEY (preCourse) REFERENCES Courses(code)
7 );
Table created.
SQL>
SQL>
SQL> drop table CourseResult;
Table dropped.
SQL> CREATE TABLE CourseResult (
2 student NUMBER(6),
3 course VARCHAR2(15));
Table created.
SQL>
SQL> CREATE OR REPLACE VIEW DemandOfCourses (student, course, situation) AS
2 (SELECT student, course, 'REGISTERED' FROM Registered)
3 UNION
4 (SELECT student, course, 'WAITING' FROM WaitingFor);
View created.
SQL>
SQL> INSERT INTO Courses VALUES ('EDA242', 'MATHEMATICS 1', 5);
1 row created.
SQL>
SQL> INSERT INTO LimitedCourse VALUES ('EDA242', 15);
1 row created.
SQL>
SQL>
SQL> CREATE OR REPLACE TRIGGER DemandOfCourses_T1_II
2 INSTEAD OF INSERT ON DemandOfCourses
3 REFERENCING NEW AS NEW OLD AS OLD
4 FOR EACH ROW
5 DECLARE
6   cpc NUMBER;
7   currentNum NUMBER;
8   stud1 NUMBER;
9   stud2 NUMBER;
10   prec NUMBER;
11   exc1 EXCEPTION;
12   exc2 EXCEPTION;
13
14 BEGIN
15
16 SELECT capacity
17 INTO cpc
18 FROM LimitedCourse
19 WHERE course = :NEW.course;
20 dbms_output.put_line('cpc '||cpc);
21
22 IF cpc IS NULL THEN
23   cpc := 1000;
24 END IF;
25
26
27 SELECT COUNT(*)
28 INTO currentNum
29 FROM Registered
30 WHERE course = :NEW.course;
31 dbms_output.put_line('currentNum '||currentNum);
32
33 SELECT COUNT(*)
34 INTO stud1
35 FROM Registered
36 WHERE student = :NEW.student
37 AND course = :NEW.course;
38 dbms_output.put_line('stud1 '||stud1);
39
40 SELECT COUNT(*)
41 INTO stud2
42 FROM WaitingFor
43 WHERE student = :NEW.student
44 AND course = :NEW.course;
45 dbms_output.put_line('stud2 '||stud2);
46
47
48 SELECT COUNT(*)
49 INTO prec
50 FROM HasPrereq hp
51 WHERE hp.course = :NEW.course
52 AND hp.preCourse NOT IN (SELECT course FROM CourseResult WHERE student = :NEW.student);
53 dbms_output.put_line('prec '||prec);
54
55
56 IF (prec = 0) THEN
57   IF (stud1 = 0) AND (stud2 = 0) THEN
58    IF (currentNum = cpc) THEN
59     dbms_output.put_line('IF_1');
60     INSERT INTO WaitingFor
61     VALUES (:NEW.student, :NEW.course, SYSTIMESTAMP);
62    ELSE
63     dbms_output.put_line('ELSE_1');
64     INSERT INTO Registered
65     VALUES (:NEW.student, :NEW.course);
66    END IF;
67   ELSE
68    dbms_output.put_line('ELSE_2');
69    RAISE exc1;
70   END IF;
71 ELSE
72   dbms_output.put_line('ELSE_3');
73   RAISE exc2;
74 END IF;
75
76 EXCEPTION
77 WHEN exc1 THEN RAISE_APPLICATION_ERROR (-20002, 'Already registered for this course.');
78 WHEN exc2 THEN RAISE_APPLICATION_ERROR (-20003, 'First the prerequesite course(s) must be taken
79 WHEN NO_DATA_FOUND THEN dbms_output.put_line('NO_DATA_FOUND');
80 END;
81 /
Trigger created.
SQL>
SQL> INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED');
cpc 15
currentNum 0 --here all count are 0, also you insert...
stud1 0
stud2 0
prec 0
ELSE_1
1 row created.
SQL> INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED');
INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED')
ERROR at line 1:
ORA-20002: Already registered for this course. --For the second time, you have your excetion...
ORA-06512: at "SCOTT.DEMANDOFCOURSES_T1_II", line 73
ORA-04088: error during execution of trigger 'SCOTT.DEMANDOFCOURSES_T1_II'
SQL> Nicolas.

Get the Error-Message-Number from RFC to SOAP

Hi All,
we have implemented a synchronous SOAP-Call to RFC over XI. How can I get the message-number from the raised exception in the RFC-function Module to the SOAP-Caller?
Thanks a lot
Matthias

Matthias,
For you to have an exception structure when an rfc is imported into Xi, the rfc should have an exception defined. Usually we define an ApplicationError as one of the exceptions.
The idea is that if there was an exception which you didnt handle in your rfc (BAPI return will be emplty), the exception will be returned to XI and shown in SXMB_Moni as hard error(of course there should be a message mapping avaliable in XI )
In all the other cases, since you are populating BAPIReturn which is tables parameter, you should be able see the filled structure in your response message from RFC.
Regards,
naveen

When i run report through OC4J Application i get a exception message

When i run report through OC4J Application i get a exception message saying Server returning invalid xml and the exception number is JBO -29000. The Reports Server is installed on machine having IP 10.191.99.254.
Below is the exception message:
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.io.IOException, msg=Server returned HTTP response code: 500 for URL: http://10.191.99.254:8888/reports/rwservlet/showjobidnull
Anybody Please help me out with this issue.....because I am really fed up with this problem....want some urgent help.....
One possible workaround which I could make out is there needs change to be made in the .rdf files in Report Builder and then inside the User Parameters we change the Initial Value to * from % because the Reports Server encodes every value as %Initial_Value% and hence if the initial value for the parameter is % then it does not get a valid value and hence it returns as an invalid xml
But unfortunately it seems this workaround does not work.Please help as soon as possible.

Hi,
you said that some changes were made in the .xml files but i had said that all the files present in Reports Developer or Reports Builder are .rdf files and I had made changes in the .rdf files for this articular report and then compiled it thereitself and then ran a paper layout of the report but the report did not comprise any data.
There was sufficient data also to populate the report. So this may not be a database issue. Please help if you can ASAP.

Exception message 26, (only warnning not an error mesage).

Dear Experts
my environment is MTO, which generates a huge number of production orders daily with a big number of exception messages which some times are not enough to adopt the PP activities on the system,
in the case of (Procurement type:X) which the planned order for a HALB or FERT, material can be produced internally or procured externally, i can partially convert a part of the total quantity into a production order or a purchase requisition and so the remaining qty, into any of the both procurement proposals.
now if the total quantities of the partially converted production orders and purchase requisition, is exceeding than the planned order qty, i am getting the exception message 26, (only warnning not an error mesage).
my requirement: i want the system to restrict users to covert the planned order into a production order or a purchase requisition if the total quantities of all the partially converted production orders and purchase requisitions are exceeding more than the original planned order quantity.
Example:
planned order qty, is 10 EA, if i convert a qty, of 3 EA into a partial production order and another qty, with 4 EA into a purchase requisition,
system must restrict me to convert the remaining qty, into a production order or a purchase requisition if i changed the qty, to a qty, exceeds more than 3 EA.
Thanks in advance.

Ahmed,
Exception message 26 is neither a warning nor an error. It is an alert that a certain business condition exists (excess stock in a segment). The general rule for exceptions is that it is up to the planner to determine the significance, and to use your company's business rules to react accordingly.
The solution to your stated requirement does not exist in standard SAP. To me, it makes no sense to lock the system down in this way. Message 26 can come from overconversion, but it can also come if the requirements are reduced.
If you still feel that this functionality must be implemented, I would suggest this partial solution, that uses standard functionality. Have your planners perform only the conversions of the plndords to firmed purchase reqs, for a given time frame, all at one time, and decline to convert the remaining balances to production orders. Then, re-run MRP with delete/recreate. This will create planned orders for exactly the balance(s) required. Then, you could immediately use the standard mass program to convert the 'balance' Planned orders to Production orders. The mass conversion could be the second step of an auxiliary MRP job.
If you insist that the requirements must be met using the method you indicated above, then it implies that every program that could be used to convert a PlndOrd to something else must be modified. I don't think I would attempt this unless there were no other possibilities.
Best Regards,
DB49

Exception message number missing in EXIT_SAPLM61R_001

Similar Messages

Maybe you are looking for