Exception Message=Unable to connect to the VMM database because the database is in an inconsistent state.

Hello,
I have a problem with SCVMM 2012 R2, it always gives error when tries to "Run the dynamic optimizer" process. The process starts automatically every 30mins. When I analyzed report.txt file I found error message:Exception Message=Unable
to connect to the VMM database because the database is in an inconsistent state.Contact an experienced SQL administrator whenever this error occurs. In some cases, it may be necessary to restore the VMM database. If the problem persists, contact
Microsoft Help and Support.
NOTE: If I start the process manually, it completes without any errors.
Any help would be appreciated

I'm led to believe this is a bug in UR5 and I think it was a bug in VMM 2012 SP1 RTM.
Our TAM says this will be fixed in UR6. We had to turn off Dynamic optimizer or we could have rolled back to UR4 but there were other bugs in UR4 which hurt us more.

Similar Messages

HT1695 I am unable to connect to my wi fi because the password is 2 characters to short

I am unable to turn on wi fi at home because the password for the router is not long enough.

You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

I am getting the message: unable to connect to server

When I try to access Apple TV I get the message 'unable to connect to server. Try again later'. I have been trying for a few days and nothing changes

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

Downloaded the latest version (8.0) and now cannot connect. Instead I get this message: Unable to connect

Every time you guys have an update there is a problem. Now I cn't connect! I am writing you using IE. Maybe I should just stop using Firefox! When trying to connect I get the following error message:Unable to connect
Firefox can't establish a connection to the server at www.google.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.

I just wanted to post that I found my I-pod cache file and deleted it and now synchronization works fine, so no need for anyone to post an answer to this. Thank you very much.

Receive the message "unable to connect to itunes store" when trying to install updates for my apps

trying to install updates available for a number of app on my phon and keep getting the same message "unable to connect to itunes store"............

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

Accessing Thunderbird help, Firefox gives the message "Unable to connected to datebase! Too many connectors."

When I access Thunderbird Help, Firefox give the following message: "Unable to connect to database! Too many connectors." Other Thunderbird Help selections work OK.

Sorry, the Mozilla Messaging forum isn't associated with this Firefox support forum. Sounds like that forum is very busy or is having server problems. All I can say is to try it later when it may not as busy, or a server problem is corrected.
Or you could try the Thunderbird support forum over here. <br />
http://forums.mozillazine.org/viewforum.php?f=39

When I log in iOS devise it gives the message 'unable to connect to server'

When I log in iOS devise it gives the message 'unable to connect to server' while the devise is connected with excellent strength signal.

Worked for me:
Download the old Apple's "Find My Friends" app, agrre to the terms there.
Hopefully this bug will be solved soon.

I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

Using Bridge CS5 exporting to flickr get error message "Unable to connect to Flickr, please check your internet connection and try again."?

using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again." please help?

I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014!

Error message "unable to connect with server. Check wifi connection"

I started having the error message "unable to connect with server. Check wifi connection" when I attempt to use search function within a certain apps and when I try to download certain magazine (eg. National geographic). I didn't have this problem with I first started using iPad, and no problems with connectivity when using other apps. Can anyone help?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted?

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted? Thanks

Hi,
Thanks.
I have tried signing out and in, still does not work.
Still just get the previously mentioned "messages".
I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
Thanks

"Unable to connect to iTunes Store" 90% of the time

I have a 3rd Gen iPad with wifi only that I bought about 40 days ago. Initially I had no problem downloading and updating apps but in the past few weeks I get "unable to connect to iTunes Store" over 90% of the time. I always verfity the Internet connection is good and I've tried on my home wifi, my cellphone's mobile hotspot, and several hotel wifi connections. The other day I went into settings and noticed the Security code for my Credit Card was blank so I filled it in and clicked "done". Unable to connect so I checked back and the code was still blank. I deleted and redid my CC info and messed with some other settings and iTunes finally let me update some apps. Now I'm back home and it's giving me the error message again. I'm wondering if this is a known issue or if there's a fix for it.

Usually it's because you are not connecting to the internet via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Exception Message=Unable to connect to the VMM database because the database is in an inconsistent state.

Similar Messages

Maybe you are looking for