Exception occured ....phone used Sony Ericsson K750i

375 [main] ERROR org.smslib - GTW: modem.com5: Wrong type of PDU detected: org.
ajwcc.pduUtils.gsm3040.SmsSubmitPdu
375 [main] ERROR org.smslib - GTW: modem.com5: ERROR PDU: 079119490490997931840
A8149747799300000FF03C8701A
375 [main] ERROR org.smslib - GTW: modem.com5: Wrong type of PDU detected: org.
ajwcc.pduUtils.gsm3040.SmsSubmitPdu
375 [main] ERROR org.smslib - GTW: modem.com5: ERROR PDU: 079119490490997931850
A8149747799300000FF024132

1. You can't. The disk that comes with the phone is useless on Macs. But in fact you don't need it. You can transfer files to and from the phone either by Bluetooth or USB cable. No software required.
2. When connected by USB, the K750 essentially is a camera connected to the Mac. You can't use iTunes directly with the phone anyway. It won't appear as a device (like an iPod would).
You have everything you need to synchronise Contacts and Calendars to your phone, and to transfer Photos & Music to it. Unlike Windows, everything is built-in to the Mac OS.
Your phone will not play iTunes Store purchased tracks, but any unprotected tracks (AAC or MP3) that you have ripped or acquired yourself will play.
There are a number of free apps for transferring music to the phone, if you don't want to do it manually using the Finder or Bluetooth File Exchange.
Check this link for details: http://mobile.feisar.com/other_sw.html
If you want to use iSync for synchronising your Contact and Calendars from the Mac Address Book and iCal, you will need a Bluetooth connection.
If your Mac doesn't have Bluetooth built-in you should purchase a D-Link DBT-120 (no other) USB dongle.
Lots of other info you may find useful is available at my site: http://mobile.feisar.com/
Jools

Similar Messages

FileConnection url to Sony Ericsson K750i

Hi there, I want to save data to my Sony Ericsson K750i. I know the phone implements FileConnection version 1.0. The list of roots taken from
FileSystemRegistry.listRoots();returns single element named "c:/". I want to save a file.txt just about anywhere, but preferably to the memory stick attached. Unfortunately, it doesn't seem to work. It throws an IOException without any message. I tried opening the fileconnection on numerous roots like c:/, C:/, /, ./, root1/, SDCard/, CFCard/, MemoryStick/ and perhaps some more but without any luck.
The exception is thrown right after this line for any of those roots:
FileConnection filecon = (FileConnection) Connector.open("file:///MemoryStick/file.txt");Please, what URL should i use?

I would go for a D-Link DBT-120. After a firmware updater on it, your are even able to use Bluetooth keyboard and mice under Mac OS 9 which you seem to boot into accoridng to your configuration.

SIP Library for Sony Ericsson K750i

Hell all,
I want to develop some application for Sony Ericsson K750i which requires the SIP protocol implementation. Can any one tell me from where i can download the SIP library. Does Sony phones support SIP Libraries. Please just provide me the links if any one knows it
Thanks a lot

you can use Salling Clicker to do an excellent job of that but i think it costs about $30. It does plenty of other things as well but if you're wanting a free solution then you should download Sony Ericsson's bluetooth remote control editor and then you can make a remote profile which will interpret your key-presses on the phone as keys on the keyboard or combinations of keys on the keyboard. You can then send this to your phone and then access it through the entertainment pane. Salling clicker offers a much more refined solution where you can go from on the desktop to the end of your presentation without even touching the mac. The other solution would require you to open up your presentation and would only allow simple navigation through the presentation.
i hope this helps

Unable to use Sony ericsson w200i iSyc plugins

Hi Guys
This is ,y mew iMac and I am new to this world. I have bought iSync plugins for Sony Ericsson W200i and I am not able to install iSync plugins. And can you please also tell me that how can I use my w200i as a modem to connect my iMac to internet. Thanks in advance.

I am not able to install iSync plugins.
You'll have to contact whoever you purchased the W200 iSync Plugin from, or follow the instructions they provide with it. Setup varies between different third-party plugin providers.
can you please also tell me that how can I use my w200i as a modem to connect my iMac to internet.
You need to have a working internet connection on the phone (i.e. you can browse the web using the phones browser). Then connect the phone to the Mac in *Phone Mode*, and go to *Settings > Connectivity > USB > USB Internet > USB data accounts* on the phone - and choose your working internet profile. Then choose the *Turn On* option. In the Macs Network system preferences pane some new ports will be detected. If you choose one of the 'Sony Ericsson' ports, these will need to be set-up with the GPRS scripts from Ross Barkmans page. If you choose an 'Ethernet Adapter' port, the phone will be provided with an IP address for connection.
(Note that the above is from memory as I haven't done it this way for some time, but hopefully it will put you on the right track if its not all 100% correct!).

Using Sony Ericsson HBH-608 Bluetooth Headset for mac

Dear All,
I have decided to pair up my "Sony Ericsson HBH-608 Bluetooth Headset" to my macbook.
I have successfully paired it up with my mac, but i am not able to use it.
I mean, i want to use it as a mic and headset to get over calls using skype.
Can some body suggest me wat went wrong in the process and why i am not able to use my bluetooth device ?
Cheers and Thanks !!

Nopes. I cant see that.
But in Bluetooth devices, I can see my headset configured and paired with the mac, but it is not connected for some reason. The headset stops beeping which means it is connected. But it is not being shown there.
I think there are some connection probs. Ways to find it out ??
please let me know

Using Sony Ericsson Z710i with iSync

Does anybody know of a free solution to configure iSync/ address book with a Sony Ericsson Z710i?
I found a lot of spam from a company that starts with Fei and ends with sar.
Please don't post a link to them.

I found an article on editing the plist for iSync.
Article link:http://www.briantoth.com/razr_v3c/editmeta.php
The gest:
1. Locate iSync.app, usually in your Applications folder.
2. Right-click or ctrl+click iSync.app and choose "Show Package Contents" from the contextual menu.
3. Dig through the following folders: Contents > PlugIns > ApplePhoneConduit.syncdevice > Contents > PlugIns > PhoneModelsSync.phoneplugin > Contents > Resources. In that folder will be a file called MetaClasses.plist and icons for all the supported phones.
4. Open MetaClasses.plist in a text editor or preferably Apple's Property List Editor which comes with with Developer Tools package. You did make a backup first, right?
5. Once done editing, just save the file. You may or may not need to re-add your phone to iSync afterwards.
Add this block this block of text at step 4:
<key>com.sony-ericsson.Z710</key>
<dict>
<key>Identification</key>
<dict>
<key>com.apple.cgmi+cgmm</key>
<string>Sony Ericsson+AAC-1052012-BV</string>
<key>com.apple.gmi+gmm</key>
<string>Sony Ericsson+Sony Ericsson Z710</string>
</dict>
<key>InheritsFrom</key>
<array>
<string>family.com.sony.ericsson.syncml-phones-2005.bt</string>
</array>
<key>Services</key>
<array>
<dict>
<key>ServiceName</key>
<string>com.apple.model</string>
<key>ServiceProperties</key>
<dict>
<key>ModelIcon</key>
<string>SEZ520.tiff</string>
<key>ModelName</key>
<string>Z710</string>
</dict>
</dict>
</array>
</dict>

How to find exception occured while using LOGON function in oracle 10g

Hi,
I am using LOGON function to login with a different user name in oracle 10g forms.
LOGON ( User, Pass@tns, FALSE)
The third parameter is passed as 'FALSE' to avoid the login screen to be opened. If any of the other parameter ( User Name, Password, TNS) is passed wrong, connection is not established but no exception is occurred. The value for 'FORM_FAILURE' is set to 'TRUE'.
What i need is the ORA error for connection failure. The error message related to user name/password (ORA-01017) or connection identifier (ORA-12155).
How i can get this error code if connection is failed. Is there any other way to login in oracle forms other than 'LOGON'.
Habib

Habib Ahmad wrote:
Hi,
I am using LOGON function to login with a different user name in oracle 10g forms.
LOGON ( User, Pass@tns, FALSE)
The third parameter is passed as 'FALSE' to avoid the login screen to be opened. If any of the other parameter ( User Name, Password, TNS) is passed wrong, connection is not established but no exception is occurred. The value for 'FORM_FAILURE' is set to 'TRUE'.
What i need is the ORA error for connection failure. The error message related to user name/password (ORA-01017) or connection identifier (ORA-12155).
How i can get this error code if connection is failed. Is there any other way to login in oracle forms other than 'LOGON'.As salamu alikum, Habib
If you pass FALSE in login you can't catch anything. Want to catch the error ?
Then change
LOGON ( User, Pass@tns, FALSE)
to
LOGON ( User, Pass@tns, TRUE) Now Create On-Error trigger at form level
and try the following code
if error_code=01017 then
     message('invalid user name or password');
     message('invalid user name or password');
     raise form_trigger_failure;
elsif error_code=12154 or error_code=1215 then
     message('invalid connection string');
     message('invalid connection string');
     raise form_trigger_failure;
end if;Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

Exception occurs when using customize Rolemapper with RoleReader for WLS814

Hi All,
IHAC, who had a 3rd security product to store their users, gourps and roles. and ask us to build up a PoC to make sure WLP can use the external roles. And one of the features is that external roles could be showed under "Global Roles" in the WLS console.
After i made a research on SSPI, i found what i need is a RoleMapper provider with "RoleReader" implementation. So I added RoleReader implementation into the SimpleSampleRoleMapperProvider(http://dev2dev.bea.com/codelibrary/code/security_prov81.jsp), compiled and delployed it, everything is ok.
But when i clicked "Global Roles", it only shows the roles from DefaultRoleMapper, none from SimpleSampleRoleMapperProvider, and i got the following exception in the console window.
What did i miss in implementing this provider? Any comment are welcome come!
Or could anybody give a sample to show me how to develop a RoleMapper provider with RoleReader.
Thanks!
javax.management.ReflectionException: The method null.listRolesForResource could not be found
at javax.management.modelmbean.RequiredModelMBean.invoke(RequiredModelMBean.java:1298)
at weblogic.management.commo.CommoModelMBean.invoke(CommoModelMBean.java:555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.console.utils.Security.getRoleList(Security.java:1933)
at weblogic.management.console.actions.security.ListRolesAction.updateContents(ListRolesAction.java:84)
at weblogic.management.console.actions.security.ListLWSecurityAction.getContents(ListLWSecurityAction.java:85)
at weblogic.management.console.tags.security.LWTableTag.getRowData(LWTableTag.java:462)
at weblogic.management.console.tags.security.LWTableTag.printTable(LWTableTag.java:141)
at weblogic.management.console.tags.security.LWTableTag.doEndTag(LWTableTag.java:133)
at weblogic.management.console.webapp._security.__roletable._jspService(__roletable.java:401)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:322)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:150)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
at weblogic.management.console.actions.internal.ActionServlet.doGet(ActionServlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Best Regards

Did you ever find a solution to this? I think we are trying to solve the same problem:
-Get roles for a user from an external system.
-List all roles available in the global roles section of the console.
In my case, it appears that both of these components together enable using the portal administrator console to entitle portlet components to a role.
The only thing I've found so far regarding the RoleReader classes is regarding making my own AuthorizationProvider.

How to crash a tiger using sony ericsson k800i

follow these steps to crash a tiger in kernel panic mode:
1. plug SE k800i using USB cable to your Mac
2. select Phone Mode when prompt at the phone
3. wait for few minutes
4. unplug USB cable from your Mac
whola!
I am not sure what is wrong with this release, prior 10.4.9 this problem does not exist, i m not too sure whether this is a bug so i only report when my Mac submits the error report to Apple online.
thanks
MacBook Pro 2.4GHz 4GB RAM 160GB HDD Mac OS X (10.4.10) Who Needs PC for Java Enterprise Development?

Well, i am assure there are nothing wrong with your hardware, i did this to my iBook G4 that 100% original hardware and original Apple certified technician work (cause in my country here, there are no counterfeit retailers of Apple, sounds more successful than MSFT huh? sorry, back to topic).
And this same error happening in my current MBP which is also 100% same s h i t s. What else could we say?
There are 2 workaround to get our SE to charged using USB:
1. When first plug in the cable connection, SE normally will ask which mode you prefer, choose File Transfer mode, then after drive been mapped to your phone, immediately Eject it and leave it on table. (noted that during File Transfer mode, you won't receive calls or text messages). Then unplug the phone without Kernel Panic.
2. When first plug in the cable connection, choose Phone Mode, then immediately launch iSync, do some simple synchronizations and quit the program. Then unplug the phone without Kernel Panic.
Hopes this helps!

Razor V3 or Sony ericsson K750i

I am planning to buy a new cell phone
the most important characteristics are:
1)compatibility with macintosh
2) Bluetooh connection
3) Fully I sync compatible
please help me decide which of the two phones work better
thanks
Luigi

I've had a k750i for about six weeks now, and can certainly recommend it.
No isync problems, worked straight off there.
I've played around with a v3 too, and featurewise it didn't seem to be quite at the same level.
The one thing to bear in mind is that if you want the very best possible level of compatibility, in terms of having a very large contacts book with customizable labels and so on, you'd be best off with a symbian phone.
Have a peek at http://www.apple.com/macosx/features/isync/devices.html too.

Using Sony Ericsson w900i as GPRS modem on Vodafone UK

Hi Folks,
I'm having real trouble using my w900i as a modem to connect to the internet. I can make the connection to vodafone's GPRS server and get an IP address. It connects fine but I am unable to load any web pages. There doesn't seem to be much receive activity.. There does however appear to be send activity. I have deactivated header compression and ppp packet echos but i am still having problems.
Any ideas peeps..?

The best thing to use is a modem script you can get from
http://www.taniwha.org.uk/
look through the list of available modem scripts for your model of phone and download it.
Then follow the readme that comes with the modem script.
I have been using Ross Barkmans modem scripts for years and they always work.

Exception Occur while Using Microsoft Visual Studio for Debugging JNI app.

Hi all,
My JNI program works fine. And also Visual Studio IDE allow to debug C++ program properly.
But after each instance of program executation(Under Visual Studio IDE) I am getting following log file.
================================================================================================================
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d99f278, pid=4800, tid=1196
# Java VM: Java HotSpot(TM) Client VM (1.6.0_02-b06 mixed mode)
# Problematic frame:
# V [jvm.dll+0x12f278]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x00446c00): JavaThread "main" [_thread_in_vm, id=1196]
siginfo: ExceptionCode=0xc0000005, reading address 0x545c3a49
Registers:
EAX=0x545c3a45, EBX=0x00000000, ECX=0x004475c8, EDX=0x01bdf6a8
ESP=0x01bdf69c, EBP=0x00447594, ESI=0x00446c00, EDI=0x00447594
EIP=0x6d99f278, EFLAGS=0x00010202
Top of Stack: (sp=0x01bdf69c)
0x01bdf69c: 00447598 00446c00 000000b6 004475c8
0x01bdf6ac: 004475c4 004475c0 004475bc 6d99f3d1
0x01bdf6bc: 01bdf720 00447594 00447598 00000e00
0x01bdf6cc: 00446c00 6d92a997 01bdf720 00447594
0x01bdf6dc: 00447598 00000e00 000000b6 00446c00
0x01bdf6ec: 00446c00 07e73fd9 01bdf768 000000b6
0x01bdf6fc: 00446c00 00446c00 01bdf700 01c67cb4
0x01bdf70c: 01bdf768 01bdf708 00447158 00447160
Instructions: (pc=0x6d99f278)
0x6d99f268: 4a 57 8b 7c 24 24 3b fb 75 04 33 c0 eb 05 8b 07
0x6d99f278: 8b 40 04 50 56 8d 4c 24 38 e8 fa 89 ed ff 8b 4c
Stack: [0x01b90000,0x01be0000), sp=0x01bdf69c, free space=317k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x12f278]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j FILE_INFO_J.SetOutputFileName(Ljava/lang/String;)V+1
v ~StubRoutines::call_stub
j FILE_INFO_J.ReadBinaryFile(Ljava/lang/String;LFILE_INFO_J;)V+0
j FILE_INFO_J.CopyBinaryFile(Ljava/lang/String;)V+3
j FILE_INFO_J.main([Ljava/lang/String;)V+38
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0be19c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3888]
0x0be18000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3752]
0x0be0cc00 JavaThread "JDWP Event Helper Thread" daemon [_thread_blocked, id=1336]
0x0be09800 JavaThread "JDWP Transport Listener: dt_socket" daemon [_thread_in_native, id=4848]
0x0bdfbc00 JavaThread "Attach Listener" daemon [_thread_blocked, id=4160]
0x0bdfac00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1436]
0x0bde8000 JavaThread "Finalizer" daemon [_thread_blocked, id=676]
0x0bde6c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=4516]
=>0x00446c00 JavaThread "main" [_thread_in_vm, id=1196]
Other Threads:
0x0bde3800 VMThread [id=4640]
0x0be34c00 WatcherThread [id=5112]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 17K [0x03cd0000, 0x03dd0000, 0x041b0000)
eden space 896K, 2% used [0x03cd0000, 0x03cd47c8, 0x03db0000)
from space 64K, 0% used [0x03dc0000, 0x03dc0000, 0x03dd0000)
to space 64K, 0% used [0x03db0000, 0x03db0000, 0x03dc0000)
tenured generation total 11948K, used 7985K [0x041b0000, 0x04d5b000, 0x07cd0000)
the space 11948K, 66% used [0x041b0000, 0x0497c5b8, 0x0497c600, 0x04d5b000)
compacting perm gen total 12288K, used 1690K [0x07cd0000, 0x088d0000, 0x0bcd0000)
the space 12288K, 13% used [0x07cd0000, 0x07e76a30, 0x07e76c00, 0x088d0000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x00423000      C:\Program Files (x86)\Java\jdk1.6.0_02\bin\java.exe
0x7d600000 - 0x7d6f0000      C:\WINDOWS\system32\ntdll.dll
0x7d4c0000 - 0x7d5f0000      C:\WINDOWS\syswow64\kernel32.dll
0x00350000 - 0x003eb000      C:\WINDOWS\syswow64\ADVAPI32.dll
0x7da20000 - 0x7db00000      C:\WINDOWS\syswow64\RPCRT4.dll
0x7d8d0000 - 0x7d920000      C:\WINDOWS\syswow64\Secur32.dll
0x7c340000 - 0x7c396000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\msvcr71.dll
0x6d870000 - 0x6dab9000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\client\jvm.dll
0x7d930000 - 0x7da00000      C:\WINDOWS\syswow64\USER32.dll
0x7d800000 - 0x7d890000      C:\WINDOWS\syswow64\GDI32.dll
0x76aa0000 - 0x76acd000      C:\WINDOWS\system32\WINMM.dll
0x7dee0000 - 0x7df40000      C:\WINDOWS\system32\IMM32.DLL
0x6d3c0000 - 0x6d3c8000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\hpi.dll
0x76b70000 - 0x76b7b000      C:\WINDOWS\system32\PSAPI.DLL
0x6d4b0000 - 0x6d4d9000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\jdwp.dll
0x6d770000 - 0x6d776000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\npt.dll
0x6d820000 - 0x6d82c000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\verify.dll
0x6d460000 - 0x6d47f000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\java.dll
0x6d860000 - 0x6d86f000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\zip.dll
0x6d330000 - 0x6d337000      C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\dt_socket.dll
0x71c00000 - 0x71c17000      C:\WINDOWS\system32\WS2_32.dll
0x77ba0000 - 0x77bfa000      C:\WINDOWS\syswow64\msvcrt.dll
0x71bf0000 - 0x71bf8000      C:\WINDOWS\system32\WS2HELP.dll
0x10000000 - 0x10023000      C:\WINDOWS\system32\nvappfilter.dll
0x77670000 - 0x777a9000      C:\WINDOWS\syswow64\ole32.dll
0x0c150000 - 0x0c1db000      C:\WINDOWS\syswow64\OLEAUT32.dll
0x7db30000 - 0x7dbb0000      C:\WINDOWS\system32\mswsock.dll
0x5f270000 - 0x5f2ca000      C:\WINDOWS\system32\hnetcfg.dll
0x71ae0000 - 0x71ae8000      C:\WINDOWS\System32\wshtcpip.dll
0x7df50000 - 0x7dfc0000      C:\WINDOWS\system32\uxtheme.dll
0x4b3c0000 - 0x4b410000      C:\WINDOWS\SysWOW64\MSCTF.dll
0x777b0000 - 0x77833000      C:\WINDOWS\system32\CLBCatQ.DLL
0x77010000 - 0x770d6000      C:\WINDOWS\system32\COMRes.dll
0x77b90000 - 0x77b98000      C:\WINDOWS\syswow64\VERSION.dll
0x0c500000 - 0x0c7c5000      C:\WINDOWS\system32\xpsp2res.dll
0x75da0000 - 0x75e5d000      C:\WINDOWS\system32\SXS.DLL
0x0cc60000 - 0x0ccc1000      E:\TI\Assignment_3\JNIFileOperation_C\Debug\JNIFileOperation.dll
VM Arguments:
jvm_args: -Xrunjdwp:transport=dt_socket,server=y,address=8888,suspend=n
java_command: FILE_INFO_J E:\Assignment_3\VC.pdf
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=D:\oracle\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\Subversion\bin;C:\Program Files (x86)\Java\jdk1.6.0_02\bin;C:\Program Files (x86)\Java\jdk1.6.0_02\jre\bin\client;C:\Sun\SDK\bin;��!
USERNAME=user
OS=Windows_NT
PROCESSOR_IDENTIFIER=AMD64 Family 15 Model 47 Stepping 2, AuthenticAMD
================================================================================================================
So please tell anyone could Figure out what is this file all about??
Is this says to be worry about it .. or just provide information of current system status??
I will be obliged to you if you would help me
Thank you.

This is exactly due to the memory stack.This error is entirely due to the native code.Check the native code,if there are data conversions handle them carefully
and if you are passing an array see to that the array doesnt oveflow.
Have some prints in the native code and watch the data transferred

Using Sony Ericsson HBH-662 bluetooth headset with skype

Hiya, I have succesfully paired my headset with my mac. The headset's microphone works with Skype, but there is no audio output on this device. Is this possible? Can anyone offer any solutions?

Nopes. I cant see that.
But in Bluetooth devices, I can see my headset configured and paired with the mac, but it is not connected for some reason. The headset stops beeping which means it is connected. But it is not being shown there.
I think there are some connection probs. Ways to find it out ??
please let me know

Never buy a Sony Ericsson for it's Customer Service ? What do you think ?. Terrible experience.Please advise.

Hi , my name is Jomon Philipose . I am from Bangalore and a victim of poor workmanship and service of Sony Ericsson C905A. It was not even 6 months that the camera , for which I bought the set showed it's true colours. "Open Lens Cover problem in Sony Ericsson phone". Yeah , just try and put that on Google and see the number of negative matched results for it !!!!!!. Guess should have read the reviews for Sony Ericsson before spending 12000 INR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.It's not only your hard earned money but the free frustration that you get for no fault of your own .. Taking it to the service centre is the only option where they tell you to repair it in 7 days but takes 2 weeks forcing you to buy a new phone if you do not have one. Forget all the re syncronisation and setting that you have to do about it, and think about the responses that you get from the Service Centre , in do not know what language. Caution : If you talk to them for more than hour it's hazardous to your spoken English .
All you get to hear is the recorded tone of "Please wait for 48 hours " Even after you call them after 2 weeks!!!!!!!!!!!!!!!!!!!!!.
No response to the Work Order complaint (SE311SS211175) what so ever . This is a crazy customer service !!!!!!! . I will definately never buy a Sony Ericsson no matter how good a phone reviews are . Neither will let anyone whom I know buy it and put in best efforts to awaken them !!!!!!!!!!!!!!!!!!!!!!!!!! .
I have logged innumerable complaints at with Legal Feedback , Media Feedback , send an email to [email protected]@support.sonyericsson.com>
Don't believe me ? , well you would have if you had heard the conversation with the Shrishti Services guys who tells me that neither " can they give the phone on time " or " Will they return it to me unrepaired!!!!!!". At one point of time I thought , the phone was Sony Ericsson's intellectual property!!!!.
My phone is under Warranty . I am being told by the Sony Service Contact Centre guys over and again that my phone is not liable to change WO Number : SE311SS211175 old Work order : Se311SS210347. Request number for the replacement of the product
90599712.
They tell me I cannot speak to the escalations manager . Neither can I escalate it .
Is it that all I have to do is keep on waiting without my phone ?. It's been the 17 th Day now . I am sure it is going to take a lot more time . They shamelessly said 8 more working days yesterday lol!!!!!
I am definitely seeking help from the Consumer Court of India .
Guys ,lucky you if you had not to face the Customer Service Centre especially in India , or else may God help you .
I really want to hear from the people who actually think there job is "Customer Care" and they are been paid for it coz I am still without a phone.

If you think you are lucky go ahead and buy it,maybe by this time you could have already bought it coz God forbid something happens to it, you do not have a good customer service to support it. After getting my phone back , not surprisingly again for the 4 th time the camera stopped working . It's a faulty product altogether and I do not want to go through the pains again to go through them . They are supposed to check the set again within 90 days from the time , the repair was carried out. But you know what I have given up on them as my work does not allow me to keep my phone away for a long time .
It would be a real pain in the place you know where . All my research for buying a good phone at competitive price went straight into the gutters .
. I would rather buy a new phone than going through the same process again for the 4 th time. And that would not be a Sony Ericsson for sure. They simply wouldnt agree that it is a faulty set and give me all kinds of stupid excuses like your phone has been used for 11 months and all . I have a question for them do you really spend thousaands for a just a phone only for the features or the peace of mind as well. Cause this one has definitely not brought peace to me . I mean c'mon 4 th time, same problem!!!!!!!

My sony ericsson t700 get freezed

i dont know what happen in my sony ericsson t700 it got suddenly switched off and when i am connecting it to pc the back red light light is just only blinking and when i am restarting my phone its sony ericsson logo is also not coming and its not getting start & i have also tried to update it and is not responding?kindly please help me out of this.

Generally a red flashing light would dictate that the battery was completely flat, when leaving the handset on charge for a long period of time does the red light stop flashing?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Exception occured ....phone used Sony Ericsson K750i

Similar Messages

Maybe you are looking for