Exception only on the first attempt
Hi Gurus,
When i click on a custom pop-up, i get a exception in the last page only on the first attempt.(CX_SY_IMPORT_MISMATCH_ERROR). i have debugged enough, but i am not able to figure out anything. What can be possibly the solution?
Do Help!!
Regards,
JoSh
Hi there,
You could try creating sub-templates within your .rtf layout template. Create 2 sub-templates somewhere within yout .rtf and call them <?template:FirstPageFooter?> and <?template:OtherPagesFooter?>, or whatever names you want.
In the first page MS Word footer, call FirstPageFooter (<?call:FirstPageFooter?>) then insert a page break even if you have no fields to display on page 2 and put <?call:OtherPagesFooter?> in the page 2 footer.
Now I have done this in the header before, but not the footer. If this doesn't work the same in the footer you could always just call the sub-templates in the body at the end of page 1 and page2 and not use the MS Word Footer.
Hope this helps
-CC
Similar Messages
-
Delay on playing an instrument (only at the first time)
Hello,
I'm new to Mainstage and have the following problem:
Always I open my concert, there is a small delay in all instruments in all patches. But ONLY at the first time, I play the instrument (hit the key). For the rest of the performance everything works fine ... How can I get rid of that??
My work-around right now is, to mute the Main Audio at the soundcheck and play every instrument/patch once ... :-(
Thanks for your support and greets from Germany
... JoonasThanks for your answers first of all !
At the end I found the solution looking at the Note:307167.1 on Metalink:
Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
This note is very useful but into the solution the point 3 is not correct !
3. Modify the servername parameter to indicate the fully qualified servername.domain
Example:
An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
Example
After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
I hope that this hint will be useful for you and others in the Discoverer forum !!!
Best Regards
Alex -
I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help
I read your first post when I was posing a separate question on the Mac Pro board. I now see that we may be talking about printing from an iPad with Airprint instead!!!!! I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice. I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot. Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf? -
My printer will only print the first page of a doc from "Pages" in good quality.
I've tried reloading drivers etc. Nothing works. My printer prints everything just fine EXCEPT for when I try to print a doc from the PAGES app. Then it only prints the first page (technically the last one prints first) and then all subsequnt pages are very poor quality.
Lexmark tech support says the problem is not with their drivers.
Any thoughts as to what the problem might be ??
THANKS for any help !Then use the latest solution!
Which doesn't need specifying either.
Peter -
How do I display text only in the first page inXML Publisher
Hi everybody,
I've been reading so much, on the last two days, on this issue at this forum but I didn't get an answer. My problem is: In an invoices report some text and fields from the invoice header, (such as payment terms, bank details etc.), should be printed only in the first page of the invoice, (If the invoice has more than one page). These elements are not in the document header/footer but in the document body. That's why I think the different fist page of MS Word will not work. I tried also <? start@first-page:body ?>, with no success. Any idea, someone?
Thanks,
ShimonHi,
Did you find solution to your problem? I am facing same issue and I want to know how you solved it? It would be great help.
Thank you.
Regards,
Rahul -
I bought a new album off of iTunes the wifi wasn't strong so I left my computer on as it was downloading and went to sleep. This morning I went to listen to the songs and some of the songs will only play the first 50 sec or the first minute? How do i fix it or refresh them so i can listen to them fully?
How do I get the songs to fully play? Or can i refresh the songs and redownload them?See Repair security permissions for iTunes for Windows.
tt2 -
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
Report from SQL Query -Excel format only show the first page
Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina HanI beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar -
Can I allow two attempts and after the first attempt have a new window open to a url?
I would like to allow the user two attempts to answer a question. However, after the first attempt, if they get it wrong, I would like a new window to open that takes them to a tutorial Web site we have, where they can find the answer. Then I would like them to be able to close that window and return to the question for the second attempt?
Is this possible?
Right now, I have designed a very clunky version of this. I have one question slide with one attempt and if they answer wrong, they go to the next slide, which has a button to the tutorial page. Then the same question slide is repeated, again with one attempt. In this same scenario, if the person got the question right the first time, they moved on to a new question slide. This works, but is bad for scoring and eliminates the possibility of using question pools and putting questions in random order.
Thanks,
Carrie100 feet would normally not be a problem......if the AirPorts have line-of-sight with each other......but if there are obstructions like walls, ceilings or furniture in the direct signal path between the AirPorts, little if any of the signal will even reach the extending AirPort.
Try locating the extending AirPort at about 50-60 feet away to see if can pick up a stronger signal to extend.
It would be much better if you connect the AirPorts using an Ethernet cable, as there is no signal loss in an Ethernet cable up to 300+ feet. -
Is there a way to create a fade only for the first loop?
I have a loop (Modern Guitar Rock 04), which I've extended out so it repeats four times. I select the Fade Tool and X-Fade for drag. I then drag just in front of the loop and onto it, which creates a fade. However, this also creates fades at the beginning of the repeating loops. Is there a way to create a fade only for the first loop?
The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).
-
Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
Any feedback or assistance is greatly appreciated.'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter -
I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?
Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right. -
PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.
Hi stephaniec0103,
Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
Have you tried repairing Acrobat from the Help menu?
Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
You may download a 30-day free trial version of Acrobat from the below mentioned link:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes.
Regards,
Anubha
Maybe you are looking for
-
If I click on a link in another application, such as one to the application's help service or a link in an email, it looks as if Firefox is trying to open a page or tab, but there is just a brief flash and nothing appears. This is a fairly recent phe
-
Error while loading .sim file with sap tutor 2.2
Dear Gurus, I had recorded a tutorial which is am attempting to edit now. On opening the tutorial through the editor, I get the following message: "The following error occured while opening the file: error loading archive: no valid header or TOC foun
-
Blue Screen of Death when Sync Attempted Now
Just installed the drivers for a newly purched HP AIO wireless printer/scanner Photosmart B209... went to Sync my iPhone this morning and was greated by a lovely BSOD when I attempted to sync... when it rebooted it attempted to SYNC but it moved incr
-
Moving from 32-bit to a 64-bit OS how will this impact ebs upgrade process
we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3 My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?
-
Playbook charges from 0% to 100% in few seconds
Its difficult to get my Playbook to start charging in the first place, the red charging light comes on for about 10seconds, goes off and then back on again. When the Playbook eventually starts to charge it goes from 0% to 100% in few seconds showing