Exception: Render.cpp line 3104
Exception occured on reboot of the system. Not reproducable.
Hello,
From what I can tell, this problem has been reported to LabVIEW R&D by a few other customers, and it is currently being investigated.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Similar Messages
-
SQL Server Assertion: File: "logmgr.cpp" , line=5512
Hi All,
We are using Sql Server 2005 Express ,
we got the below exception of Sql Server Assertion
2014-11-17 00:26:12.59 spid51 Error: 17066, Severity: 16, State: 1.
2014-11-17 00:26:12.59 spid51 SQL Server Assertion: File: <"logmgr.cpp">, line=5512 Failed Assertion = '!(minLSN.m_fSeqNo < lfcb->lfcb_fSeqNo)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
2014-11-17 00:26:12.61 spid51 Error: 3624, Severity: 20, State: 1.
2014-11-17 00:26:12.61 spid51 A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running
DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
2014-11-17 00:27:34.81 Server Using 'dbghelp.dll' version '4.0.5'
2014-11-17 00:27:34.81 Server ***Unable to get thread context - no pss
2014-11-17 00:27:34.81 Server * *******************************************************************************
2014-11-17 00:27:34.81 Server *
2014-11-17 00:27:34.81 Server * BEGIN STACK DUMP:
2014-11-17 00:27:34.81 Server * 11/17/14 00:27:34 spid 0
2014-11-17 00:27:34.81 Server *
2014-11-17 00:27:34.81 Server * Non-yielding Scheduler
2014-11-17 00:27:34.81 Server *
2014-11-17 00:27:34.81 Server * *******************************************************************************
2014-11-17 00:27:34.81 Server Stack Signature for the dump is 0x000003E6
2014-11-17 00:27:35.75 Server External dump process return code 0x20000001.
External dump process returned no errors.
2014-11-17 00:27:35.75 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
99%. Interval: 75000 ms.
2014-11-17 00:28:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 135953 ms.
2014-11-17 00:29:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 195953 ms.
2014-11-17 00:30:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 255953 ms.
2014-11-17 00:31:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 315953 ms.
2014-11-17 00:32:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 375953 ms.
2014-11-17 00:33:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 435953 ms.
2014-11-17 00:34:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 495953 ms.
2014-11-17 00:35:05.77 Server The time stamp counter of CPU on scheduler id 1 is not synchronized with other CPUs.
2014-11-17 00:35:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 555953 ms.
2014-11-17 00:36:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
97%. Interval: 615953 ms.
2014-11-17 00:37:35.77 Server Process 51:0:0 (0x1574) Worker 0x20AA00E8 appears to be non-yielding on Scheduler 0. Thread creation time: 13059477540625. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 0%. System Idle
98%. Interval: 675953 ms.Assertion error are usually some corruption in SQL Server database. And non yielding scheduler seems like bug what is output of
select @@Version
Did you tried running dbcc checkdb on SQL Server 2005 database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530
I am trying to make a movie and burn it to a disk for school but I keep getting that error (Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530) It occures after about 5 or 10 minutes of transcoding. The original file was a mkv file format with a dts audio and a avs video track.
Here is the detail of the video.
Format : Matroska
Format version : Version 2
File size : 6.56 GiB
Duration : 2h 10mn
Overall bit rate : 7 197 Kbps
Encoded date : UTC 2011-10-26 03:46:55
Writing application : mkvmerge v4.8.0 ('I Got The...') built on May 24 2011 03:12:58
Writing library : libebml v1.2.0 + libmatroska v1.1.0
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Muxing mode : Header stripping
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 10mn
Bit rate : 5 689 Kbps
Width : 1 280 pixels
Height : 528 pixels
Display aspect ratio : 2.40:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.351
Stream size : 5.05 GiB (77%)
Writing library : x264 core 119 r2106 07efeb4
Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=5689 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language : English
Audio
ID : 2
Format : DTS
Format/Info : Digital Theater Systems
Muxing mode : Header stripping
Codec ID : A_DTS
Duration : 2h 10mn
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossy
Stream size : 1.38 GiB (21%)
Language : English
Knowing that Encore does not support mkv I demuxed the mkv taking out the video track into a .h264 file using mkvextract. I then muxed it into a mp4 without the audio using mp4box then dragged it into encore without any problems. For the audio, I just demuxed it out into a dts and dragged that in as well. I then created a new timeline and dragged each peice of media into there corresponding sections on the time line. I tried to play the video but there was no audio. I treid to import the dts and got a warning saying something like, "DTS is supported in this version of Encore (CS5) but just not in preview. When I burn it to the disk there will be no problems" So I just went ahead and tried to build the video into a dvd folder for a dual layer disk.
The setting I have for the DVD is default except I changed the bitrate to 9.4mbps. That's the only thing I changed. (I used NTSC)
I played the audio using an external player to see if it plays and it did. When I check to see if there is any problems with the build it only says something about start remote and end action. I have never set them before so I don't think that should matter.
I have Encore installed on my secondary drive (Not C: which is windows) and I treid to create the DVD Folder on that drive. When I got this problem I just thought it was that it could not create the files on the drive because the program isn't running off that drive which it should be, I treid to create the DVD Folder on the C: drive and I still revieve the same error.
Does anyone know how I can get past this? I need this to be done by tomorrow for school in the morning.Hi Stan and thank you for your concern, I was (I am) getting that in a timeline. and also a kind of general error when I was trying to build ether a folder or an image. I had made a copie of the project for me to delete all menus I also change all "end actions" who were on "stop" configuration but still my problem was there. In this project in encore two things I did witch may be the coz ot the problem?
-first when changing the menu styls and edition with Ps (maybe I did some thing wrong there?) and
-second when changing throught encore the markers on my principal time line witch maybe a did in a wrong way.
whatsoever thank you and sorry that I took a long time to answer, regarding my english writting you allready undertand that it is not my language. In addition I'm not a professional in editing but I'm still learning. I think it will be quiker for me to do the project again till the start on encore even if for me it wood be good for to know where the problem came from for me not to do it again.
Thanks a lot best regard
Fabian -
"Fatal internal error:"memory.cpp",line 593"
I need some help.
Can some please explain what i am doing wrong here. i have created a Dll from a LV 7.0 vi. The header file looks something like this:
typedef struct {
long dimSize;
double elt[1];
} TD2;
typedef TD2 **TD2Hdl;
typedef struct {
double f0;
double df;
TD2Hdl magnitude;
} TD1;
void __cdecl Spectrum(double freq, double amp, TD1 *Spec);
And i have the following code where i allocate memory and attempt to call 'Spectrum':-
TD1 *Power;
double frequency=10, amplitude=1;
Power = (TD1 *) malloc(sizeof(TD1));
(*Power).magnitude = (TD2**)malloc(sizeof(TD2));
*(*Power).magnitude = (TD2*)malloc(5000*sizeof(TD2));
(*Power->magnitude)->dimSize = 5000;
for (i=0; i<500;
i++) {
(*Power->magnitude)->elt[i] = 0;
Spectrum(frequency, amplitude, Power);
I keep getting Fatal internal error: "memory.cpp", line 593" when it tries to call Spectrum. I believe i have allocated memory correctly although i may be wrong. (I was getting 'exception' errors before). The VI i used to create the Dll contains a basic 'Function Generator' (sine wave) and a 'Power Spectrum'.
I have looked at the Knowledge base and dll examples that come with LV 7.0 and have tried setCINArray and NumericArrayResize but have not had any luck. It seems like the documentation is for LV 6.0 and 6.1.
Has anybody seen this or have any idea why i am getting this?
Thanks> Can some please explain what i am doing wrong here. i have created a
> Dll from a LV 7.0 vi. The header file looks something like this:
>
> double frequency=10, amplitude=1;
> Power = (TD1 *) malloc(sizeof(TD1));
> (*Power).magnitude = (TD2**)malloc(sizeof(TD2));
> *(*Power).magnitude = (TD2*)malloc(5000*sizeof(TD2));
>
> (*Power->magnitude)->dimSize = 5000;
>
> for (i=0; i<500; i++) {
> (*Power->magnitude)->elt[i] = 0;
> }
>
> Spectrum(frequency, amplitude, Power);
>
> I keep getting Fatal internal error: "memory.cpp", line 593" when it
> tries to call Spectrum. I believe i have allocated memory correctly
> although i may be wrong. (I was getting 'exception' errors before).
> The VI i used to create the Dll contains a basic
'Function Generator'
> (sine wave) and a 'Power Spectrum'.
> I have looked at the Knowledge base and dll examples that come with LV
> 7.0 and have tried setCINArray and NumericArrayResize but have not had
> any luck. It seems like the documentation is for LV 6.0 and 6.1.
>
It looks to me like you are constructing arrays to pass to LV using
malloc, instead of the labview.lib functions for creating or resizing LV
array handles.
You should refer to the manual on Calling External code for details on
the construction of an array.
Greg McKaskle -
Internal Software Error: .\AVTreeNode.cpp, line 25 when saving a project
Hello,
I am trying to work with Encore DVD 2.0 on Windows XP professional (SP 2). Until now with every project I try to make I see new error messages, and my whole work consists of trying to find work arounds.
My actual project consists of five slide shows. They are all between 1 and 2,5 minutes. Except for one, that only consists of a black screen shown for 5 seconds.
I have a playlist that contains all slide shows. Between two of the longer slide shows I inserted the 5 second black screen. What I wanted to achieve with this technique is that I can easily change the "gap" between two slide shows by changing the duration of the black screen slide show once. Alternatively I could have added a black image as the last slide two each of the four slide shows, but then I would have to change the duration of that slide four times when I want to change the gap between the slide shows.
Anyway, I finally tried to create the project which resulted in the CVOBUPlanner.cpp error in line 331.
So I wanted to track down the problem by
- deleting some of the slide shows
- saving the project under another name
- trying to create that project
So first I deleted everything but the first slide show from the playlist. then I deleted all the slide shows but not the first one (and the 5 second black screen though I didn't use it here), from the project. Saved the project under another name and created it without an error.
Then I opened the original project again. Now I deleted everything but the first slide show and the 5 second black screen slide show. Again I deleted the slide shows, but not he first and the 5 second black screen.
I tried to save the project under another name, but now I received an internal software error: .\AVTreeNode.cpp, line 25.
After I restarted the application I was able to open the original movie, delete the slide shows and save the project under another name.
I still wanted to let you now because this is an error message that I have not seen before and didn't find here in this forum.
Regards,
Christian KirchhoffThere are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug? -
LV crashes when I try to save a VI - "fpsane.cpp line 269 error"
Dear LV users:
“Fpsane.cpp, line 269 error”
I have this error when I modify the VI and try to save it. Often I run it once and save it without problem. When I modify it again and try to save it, the error appears and LV crashes.
First I made a 6.0.2 upgrade and later I followed the “solving troubles” procedure at NI home page, like empty the TEMP directory and so on.
Later I sent my VI to NI support and I received the confirmation that they were able to reproduce the error, but not able to isolate it. Also they wrote that “Maybe can be a problem with the charts” and “it could be a bug in LV 6.0.2 which is fixed in LV 6.1”.
They saved my VI as a 6
.1 version and there were no problems (any error).
The problem is:
“ LV 6.1 is the next release (newest version) of LV and it will be released this year (the date is not fixed). That's not an update like LV 6.0.2 but a new version of LV. It must be purchased”
So I have a trouble here. I have some VIs that contains some parts in common. Now they are crashing too. I’m not confident anymore to make tests and modifications, since LV will crash again. What I’m doing after run my VI is exiting LV and open the VI again. Only after I can realize (and save) the modifications. This way is really a pain in a neck....
Please, can someone tell me a good way to isolate this problem or to solve it? I really don’t want to wait LV 6.1 nether to buy it to solve this “bug”....
Thank you in advance
Rodolfo
OS: Nt4 sp 6
LV 6.0.2Dear LV users
Sorry for not have included the VI.
"test time save format.vi" is a learning program that contains some ideas to be used in another one. The error (fpsane.cpp) that appears here also was detected in LV 6. On the first time after grouping/edit some controls.
This error occurs when you modify the VI and try to save it. Often you run it once and save it without problem. When you modify it again and try to save it, the error appears. This is the same problem that happened with 2 other VI, even with one LV original example (after grouping).
The same error happened in another computer (also running NT4). All libraries were rebuilt during the installation of LV 6.02 and the TEMP directory is empty.
I hope that this vi will help us.
Thanks ag
ain
Rodolfo
Attachments:
Test_time_save_format.zip 92 KB -
Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph
NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well.. I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayRHi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR -
Internal error: "memory.cpp", line 593 with PXI 8175
Hi,
I have created a program with Labview RT 7.0 which makes acquisition, storage and display of data with PXI controllers 8175.
I used Datasocket for the data display on a deported computer.
Because of the number of the Datasocket tags used, instead of sending values all the time, I'm sending value for the deported computer only if the user needs to see it.
For example : if the user needs to see data, so only Datasocket tags for data display will be active, and if the user needs to see parameters values, so only parameters datasockets tags will be active. And, if the display program is in "standby" mode, almost all datasocket aren't active.
So when the user needs to see data values, he opens the data values window of the display program, and then, the datasockets tags for data value are now active, but : sometimes at this moment, the PXI stops with an "internal error "memory.cpp" line 593"!
The only solution is to manually reboot the PXI, the programmatically reboot doesn't work in this case of error. But it is far away from the displaying computer.
The error happens regularly after a 2 weeks period of standby. So I though about a memory overflow, I checked all the arrays, and none of them is growing to the infinity.
If someone knows about this problem, I will be very happy to learn about how to get rid of it!!!
Best Regards,
G Liagre
Best regards,
G LiagreHi Rob, Hi Matthieu,
Thank you for your reply.
I found in the database many reply about this error, but none of them were helpfull for me.
I tryed your link to the knowledge data base, but the error described there is for dll association in LabView and interface nodes.
I didn't used any interface node in my code.
The problem is that I cannot test my program on the PXI because I don't have access to it rightnow (only by remote desktop, and with a 56k modem..)
Let me give you a part of this huge code.
I suspect this part of the code to be the one which create the problem, but it's not sure.
If you find something obviously wrong, tell me!
Best regards,
G Liagre
Best regards,
G Liagre
Attachments:
Communication.zip 931 KB -
Labview version 6.1 failure:"linker.cpp", line 2302
I have the labview version 6.1 failure:"linker.cpp", line 2302 fault.
Does any one can help me please ?
Solved!
Go to Solution.Actually HeapPeak existed as far back as LabVIEW 4 or maybe even 3. However it is not usually helpful for linker errors as that is something in the LabVIEW compiler itself. HeapPeak can be sort of useful for Insane errors to locate the element that the compiler considers insane (and consequently delete and/or rewire it).
If this is a recent error on a VI that used to work before, it is most likely related to a corruption to the VI and the best course of action is to replace the VI from a backup (source code revision control would be a great advantage here). If it is something where no previous (working) state is known about, then it is going to be a tough cookie. This version is 14 years old and eventhough I still have some installation of that version somewhere it is several years ago that I started that up for more than some accidential reasons. I'm pretty sure NI would need to do some archeological work nowadays to come up with a system they could use to replicate such an error and the OP would need to be a pretty high profile customer that they would go through that sort of effort.
Maybe it is related to this error. It is the closest available in the publically accessible list of errors. A complete recompile of the entire source code tree is definitely one of the first actions to try. It may fix the problem or run into even more errors that could maybe point into a more specific location. Upgrading to a more recent LabVIEW version is another possibility although hampererd by the fact that the currently shipping version isn't officially supporting XP anymore and that the Vision software is one piece of software that underwent serious changes in the course of time and an update from 6.1 to the most recent version is most likely not a seamless operation.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217
I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEXYou really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701
-
Winocc.cpp line 329 - using CWGraph in MFC OCX project
I'm trying to create my own custom ActiveX control for use in a third party application. My control consists of a dialog window (CDialog derived) that I use for data display. This works fine, but if I drop a CWGraph control onto my dialog, the control crashes the app with an assert in winocc.cpp Line:329. Is what I'm attempting possible? Can anyone tell me why it crashes? I'm using VS2005. I've included a dummy project that shows the problem. I'm still sort of new to VC++ so I may very well have missed something obvious.
Thanks-
Attachments:
MyTestOCX.zip 4258 KBHi codeman,
Have you tried replacing your CWGraph control with any other common Visual Studio controls, like a button. I don't think that it is the CWGraph that is causing your application to crash. I think it is some of your code behind the project. I'd like to see if we can verify the operation with a different kind of control.
Regards,
Marty H.
National Instruments -
File 'pcprocbinding.cpp', line 1028, function 'PCDBTableCollection::FindOptimizedColumn'
The cube was compiling ok. I was using sql Server 2012 Standard.
I upgraded to Sql Server 2014 Standard.
Now when compiling the cube, without any changes, I get this error :
Internal error: An unexpected error occurred (file 'pcprocbinding.cpp', line 1028, function 'PCDBTableCollection::FindOptimizedColumn').
Errors in the OLAP storage engine: An error occurred while processing the 'Fact Inventaire Sem Past Year' partition of the 'Fait Inventaire Semaine' measure group for the 'Canac DM Ventes Produits Semaine' cube from the CanacDMVentesCondense database.Hi Karlrw,
Glad to hear that your issue had been solved, thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support -
Internal software error: .\PGCStreamInfo.cpp, line 1413
Im designing a DVD teaching project within Encore DVD 2.0.0.48678 from the Creative Suite 2 Production Premium software system. The project is very large and complex. As of now there are only 2 separate timelines. 1st time line has 50 chapters. 2nd time line is not finished but currently has 15 chapters. Because its a teaching DVD, there are also chapter play list created for each individual chapter. I also have a countless number of menus and links to sub menus and additional video links from the chapter play list. All of my links are set and operational with all functions in the individual menus working properly. This is an ongoing project for 3 months now, with perfect results prior to today. I have used the "preview from here" function with no problems to test the links and verify the menu structures with flawless results for the past 3 months. Today I was giving a demo of my progress, when I selected the "preview from here" I received this new error message, "internal software error: .\PGCStreamInfo.cpp. line 1413". I have checked and rechecked links, buttons, playlists, chapters, end actions, timelines, basically everything I could imagine and have even tried a computer restore point from 5 days back, at this time still have not resolved this issue.
AMD Athlon 64 3000+
2.01 GHz 1.00 GB of RAM
Microsoft Windows XP Home Edition Version 2002 SP2
Gigabyte GeForce 7300 GT videocard
Thanks for any suggestion, if more info is needed to solve this, i can provide it.There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug? -
I have encountered the new error "Fatal internal error fpinit.cpp line 7398
I get the error message "Fatal internal error fpinit.cpp line 7398".
I use:
TestStand 2.0
LabView 7.1
Vision 7.1
uEye USb Camera
I've included into my TestStand programm some new steps that control the uEye USB Camera.
I use following steps (all steps written in LabView):
- Initialze Camera
- Wait
- Close Camera
- Wait
I have the settings "Load dynamically" in TestStand"
If I use also the setting "Unload after sequence executes" and start the sequence I get somtimes a LabView error after running the Step for the Camera initialization. LabView is sometimes immediatlly closed. This happen at leased after 10 turns/starts of the programm. If I use the loop functions "Loop on selected steps" it happen only sometimes at the first loop. The initialize Camera Step is every time pass, if TestStand try to run the next step I get a error.( Sometimes I get also the message ActiveX Server got lost)
I detected also that sometimes in this case a constant in a other vi is emty.
Normally I use the setting "Unload when sequence file is closed" then I have the problem only sometimes at the first turn.
If the initialize Camera step is succesfull I have no problem with further camera steps.
Regards
Alexander
Attachments:
lvlog02-18-10-09-34-10.txt 1 KB
Copy of Error.jpg 76 KB
Copy of Error2.jpg 42 KBHi Alex,
I'd suggest to replace all ctl. with new ones.
Perhaps one of them is corrupt.
You will find a documentation about preferred execution system
in the LabVIEW help. I also attached this files.
Regards
DianaS
Attachments:
help1.gif 37 KB
help2.gif 11 KB -
Receive "Fatal Internal Error: Linker.cpp, line 1926 when run executable.
Hi, I use invoke node to call multiple subvi.vit, it work fine under .vi but when run under an executable I receive this error:
Fatal Internal Error: 'linker.cpp", line 1926
LabVIEW Version 7.0 You will lose any unsaved work. For more assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
Any suggestion will be very appreciatedHi David,
What you are seeing is a known issue when calling LabVIEW 7.0 VITs from
an executable or DLL if the VITs include any Express VIs. It can happen if you
try to load
multiple instances of that template VI using VI Server.
There are a couple of workarounds for this issue:
Take
all the express VIs that are inside the template VI and turn them into
static subVIs. You can do this by right-clicking on the express VI and
selecting "Open Front Panel"; then save the express VI as a normal
subVI.
Build the entire application into a single executable, which will force all of the express VIs to get compiled as static subVIs.
Don't use the runtime engine at all and always run your application in development mode.
Let me know if the workarounds fix your issue, thanks.
Good luck!
- Philip Courtois, Thinkbot Solutions
Maybe you are looking for
-
HT3819 do the computers for home sharing of iTunes have to be in the same building?
Can you use home share at three separate locations (cities) within the same network?
-
Could I run Mac & PC, on the same screen, at the same time?
I run my MacBook Pro on MacOSX and on Windows XP using BootCamp. The problem is that I cannot run both operating systems, on the same screen, at the same time . I need to shut one to be able to open the other one. Does one knows a software to install
-
Out of memory message in the audio window
i finally updated my studio software from logic6 whilst still using the protools HD 192 interface. i updated the OS to leopard and installed logic 7 and updated the software for everything.(atmosphere,bfd,stylus,autotune etc). not only did many of th
-
What is the best or most universal file format to save a video?
I am working on a video of a family gathering and the file is huge. What is the best file format to use? Can I email it to family without going through YouTube?
-
I am looking to create a similar effect to the one in this website: http://www.timoweiland.com/ I have a large image that I would like to pan around on various button clicks and I have no idea how to begin. Any help or a point to the right post/tuto