Exception Uncaught: When doing Zero Suppression

Hi Gurus,
When I tried to suppress zeroes localy in the query report, its throwing an error message
"Program error in class RRMX_START_EXCEL method:UNCAUGHT EXCEPTION"
"SYSTEM ERROR IN PROGRAM CL_RSR_REQUEST and form CHANM_SETTINGS_SET"
What is the problem that I am facing and how can I correct the same?

No..After executing the report, i tried to put zero suppression by right clicking on the query and enable zero suppression. Then the error is getting..

Similar Messages

  • Zero suppression

    Hi All,
    i am facing one problem with zero suppression.
    i.e when i am doing zero suppression it is not showing any effect on output.
    is there is any option to overwrite of zero suppression.
    and i have selected that in query properties .
    At the same another issue i.e when i am doing zero suppression the blank rows also not displaying along with the zero contained rows.
    Could anyone help me in this regard..
    Thanks
    Mohan

    Hi,
    In Report Properties.
    Select Zero value Display  = Supress Zeros.
    Supression = Active
    Effect on = Row and Columns.
    Else
    You create conditons and then there give Conditions for Keyfigures which are greater then ZERO.
    Thanks
    Reddy

  • Top 10 Condition and Zero Suppression

    I have a query that has a zero suppression turned on, so that rows/columns that have no values are suppressed.
    I have added a condition to the query such that only the top 10 are displayed.
    The problem is that the condition appears to be applied after the zero suppression. The result is that when the top 10 are displayed, it is displaying blank columns, as there may be values in a column, but none of them fit into the top 10 criteria.
    Does anyone know how I can suppress the zero columns/rows when the top 10 condition is active as well.
    Thanks in advance for any assistance.
    Regards
    Richard

    Hi Anil,
    Thanks for the response.
    Unfortunately the column(s) that are to be hidden will change depending on the data, so this will not work.
    ie. if you consider a query that has products on the rows, customer across the top, and there is a top 10 condition on the net sales of the product, so I will always have 10 rows of products, but the number of columns will vary, depending on how many customers have bought that product.
    Thanks again for your suggestion.
    Regards
    Rich

  • Dynamic template report zero suppression

    Hi
    I  have a report which  was developed using dynamic template  and it works fine. When I configure the  zero suppression for row ( yes in control ) yes, it suppress the rows with  zero in first column. So it  suppress the row which  has  some values in second column  but zero in first row. It does  not suppress the rows if  the first column has values but second column has zero.What I  want  ? to suppress zero only when all the columns ( 2 in my case ) has zero values. I donu2019t see any other  configuration option in control. Can some one guide me how to suppress  zero  only when all the columns in any row is zero.
    Thanks in advance
    SN

    Hi SN,
    If both columns are part of the EVDRE (included in the column range and pulled from the server) then this is not the correct behavior. What version of BPC are you on (7.0/7.5, and support pack)?
    If the second column is not populated with data from the server, then this could happen, depending on how you have built your EVDRE.
    Can you provide more detail about how the columns are populated?
    Ethan

  • BI7 - Zero suppression w/ more than 1 drill down/accross

    Hi,
    When using structures & drill downs/across, the zero suppression does not work as expected:
    Eg. Assets Liabilities & Income statement are 3 nodes of a Group account structure, G/L account is drilled down while profit center is drilled across.
    ___________________________________________Profit Center 1__Profit Center 2____Total
    A -Assets (Group account structure node)
                GL Account A1___________________________________10_____________15__________25
                GL Account A2                                                    5                      5                10
                GL Account L1                                                     0                      0                 0
                GL Account L2                                                     0                      0                 0
                GL Account I3                                                      0                      0                 0
                GL Account I4                                                      0                      0                 0
    L -Liabilities node (Group account structure node)
                GL Account A1                                                    0                      0                 0
                GL Account A2                                                    0                      0                 0
                GL Account L1                                                     1                      2                 3
                GL Account L2                                                    25                     5                30
                GL Account I3                                                      0                      0                 0
                GL Account I4                                                      0                      0                 0
    L -Income Statement node (Group account structure node)
                GL Account A1                                                    0                      0                 0
                GL Account A2                                                    0                      0                 0
                GL Account L1                                                     0                      0                 0
                GL Account L2                                                     0                      0                 0
                GL Account I3                                                      5                      7                12
                GL Account I4                                                     42                     3                 45
    In our case the desired displayed result shall be:
                                                                                    Profit Center 1   Profit Center 2     Total
    A -Assets (Group account structure node)
                GL Account A1                                                   10                     15               25
                GL Account A2                                                    5                      5                10
    L -Liabilities node (Group account structure node)
                GL Account L1                                                     1                      2                 3
                GL Account L2                                                    25                     5                30
    L -Income Statement node (Group account structure node)
                GL Account I3                                                      5                      7                12
                GL Account I4                                                     42                     3                 45
    I would be gratefull if you could advise for a solution (OSS note or other) knowing that:
    Zero suppression is active on the structure
    Zero suppression is active on rows & columns on the report
    If only one drill is active, the suppression works.
    Many thanks
    Edited by: barabace on Mar 4, 2009 10:51 AM
    Edited by: barabace on Mar 4, 2009 10:52 AM
    Edited by: barabace on Mar 4, 2009 10:52 AM
    Edited by: barabace on Mar 4, 2009 10:53 AM
    Edited by: barabace on Mar 4, 2009 10:53 AM

    Hi barabace,
       if you are using structure then at the structure properties in display tab check on Apply zero suppression to this structure. this solve your problem.
    Regards,

  • Problem with 7447 zero suppression

    7447 zero suppression doesn't work in Mulitisim 10. Can anybody solve this problem or tell me how to realize this function?
    circuit attached.
    Attachments:
    led decoder demo.ms10 ‏62 KB

    This is an interesting little situation. I believe you to be correct but it goes much deeper than that. When I tie RBI to ground it not only lights up all the segments, but it will not let the number selected be displayed. If I tie BI/RBO to ground it blanks the display and nothing is diplayed. I have tried everything I can think of to get the zero not to display while at the same time getting the selected number to show up. I have not been able to do this. Therefore your statement is correct that it not working properly. This will have to be one for NI to look at and see what they may have up their sleeve to get this to work correctly.
    I never really noticed this as usually the zero never bothered me when doing my counting circuits. Thanks for bringing this to the forum's attention.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Error in pricing when doing sourcing in EBP 4.0

    Hello,
    We're experiencing random errors when doing sourcing in EBP 4.0. The shopping carts don't seem to have any similarities that could launch the error. There has been few cases when the same error has occured when user is creating a shopping cart.
    The problem occures when doing sourcing and the shopping cart is either being held or a PO is created. The error creates dump in ST22, "UNCAUGHT_EXCEPTION". This is somehow related to pricing and we have checked note 673372 and ran report BBP_CND_CUSTOMIZING_CHECK, all OK. IPC is running the same SP level as SRM, SP level 10.
    We have already created an OSS about this, but as this is completely random we haven't been able to reproduce the error and no solution has been found.
    Here's some data from ST22:
    Transaction......... "BBPSOCO01 "             
    Program............. "SAPLBBP_PDH"            
    Screen.............. "SAPLBBP_SOCO_UI_ITS 2000"
    The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT"
    The main program was "SAPLBBP_SOCO_UI_ITS ".                                                                               
    The termination occurred in line 69 of the source code of the (Include)   
    program "LBBP_PDHU08"                                                    
    of the source code of program "LBBP_PDHU08" (when calling the editor 690).
    000600   * get the messages from the application log    
    000610     TRY.                                         
    000620         CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'  
    000630           TABLES                                 
    000640             E_MESSAGES = LT_MESSAGES.            
    000650       CATCH CX_BBP_PD_ABORT.                     
    000660         REFRESH LT_MESSAGES.                     
    000670     ENDTRY.                                      
    000680                                                  
    >     RAISE EXCEPTION TYPE CX_BBP_PD_ABORT EXPORTING
    Thanks already in advance!
    -Jussi

    Hi
    Please refer to following SAP Notes:
    Note 860935 - pricing customizing exits are missing
    Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
    Also try to implement the latest IPC patches following the instructions from note 880749, then restart the VMC. It worked for us, after trying many things with no luck.
    Alternatively, try this as well. There must be some problem with VMC. Most probably java connection problem. Please execute program RSVMCRT_HEALTH_CHECK in SE38 transaction. You should see green for all 4 messages in the result. Please contact your basis consultant and refer notes 854170 (and 844817)
    <u>Other related OSS notes.</u>
    Note 1024374 - Unexpected pricing error for pricing irrelevant item
    Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
    Note 860935 - pricing customizing exits are missing
    Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
    Note 854170 - Activating the component "VM Container"
    Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
    Note 880749 - Patching of VMC based AP 7.00 engines
    Note 854170 - Activating the component "VM Container"
    Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
    Hope this will help.
    Please award points if helpful.
    Regards,
    -Atul

  • Keytool error: java.lang.Exception: Keystore file does not exist:

    Hi All,
    While listing the keystore using the command keytool -list, I got the error message that
    keytool error: java.lang.Exception: Keystore file does not exist: C:\Documents and Settings\subramanian.arivalag\.keystore
    I noticed there is no file .keystore in the above mentioned directory. What's this .keystore file? Will it be created automatically or should we create manually?
    Already I created a keystore using -genkey command and received CA authority also.
    Kindly provide me more details about .keystore file and how to handle this error.

    If you specified a keystore filename when you created the keystore
    i.e. keytool -genkey -alias jboss-ssl -keyalg RSA -keystore my_name.keystore -validity 3650
    then you need to specify the same keystore when you export the cert
    i.e. keytool -export -alias jboss-ssl -keystore my_name.keystore –file my_name.cer

  • ABAP Dump is encountered when doing the negative subsequent adjustment

    Hi Experts !!!
    An ABAP Dump is encountered when doing the negative subsequent adjustment (posting a 102 movt type) on a Purchase Order via the Z function module. The dump only happens if the scenario satisfies the following conditions:
    1.Material is either (but may not be limited to) 3000000234, 4000000121, 3000000210 (These are the only reported materials)
    2.Order unit in Purchase Order is in MT
    3.At 2nd weigh, Net Weight is less than PO Order Qty.
    Note: No error occurs if same process is done via MIGO.
    Initial Analysis:
    An exception/error occurs when calling function u201CMB_CREATE_MATERIAL_DOCUMENT_UTu201D .
    Please see below error anlysis report from after executin Zfunction module code.
    Error analysis
       Short text of error message:
       Material 3000000234 / US01 Column 0001: MSEG-BPMNG not in quantity table
       /not consistent
       Long text of error message:
        Diagnosis
            Before the system posts a material document for an HPM/TDP material
            (MARA-CMETH = 1 or 2), it performs the following consistency
            checks:
            o   For each unit of measure in the Unit of Measure Group
                (MARC-UOMGR), a line item  has to be present  in the additional
                quantity appendix table (Table MSEGO2)
            o   For each unit of measure in the main core table MSEG that is
                not initial a line item, has to be present in the additional
                quantity appendix  table (Table MSEGO2) and the corresponding
                packed format quantities have to be identical.
                This way, inconsistent stock level updates can be prevented.
        System Response
            The system stops processing.
        Procedure
            If the error is reproducible, contact your system administrator.
        Procedure for System Administration
            The inconsitency can have several reasons, for example:
            o   Incorrect postings from external systems using function module
                MB_CREATE_GOODS_MOVEMENT
            o   Handling errors
            o   Application programming errors
       Technical information about the message:
    Message class....... "O3"
    Number.............. 359
    Variable 1.......... 3000000234
    Variable 2.......... "US01"
    Variable 3.......... 0001
    Variable 4.......... "BPMNG"
    Please let me know,if you want some other details.

    Problem Issolved

  • When does downloading begin for Manager.createPlayer

    when you make a call to the Manager.createPlayer method using a url and the parameter passed in, when does the video begin to download. Immediately? Or do you have to call realize first to begin the download, or even prefetch. I'm trying to put together a video streaming midlet by stitching players together and I now know that you can't have two players in the realize state at once. If that is true and I can't start downloading anything until a player is in the realized state, then how do I download a video when I'm playing one. Confusion. Can somebody clear this up for me. Also, has anybody ever heard of a media exception whose reason is "nMediaSetUp failed"? Confusion.

    If you visit the main Apple Support Web page, where it says "About Your Support Coverage," there is a box in the lower, right-hand corner to enter your serial number to find out about your AppleCare or warranty coverage. It will tell you the date the computer was "purchased" and your warranty began. I've seen the dates reflect an AppleCare Protection Plan I enrolled right before visiting the main support page, so it is up-to-date quickly.
    -Doug

  • Zero Suppression Not working in Bex Query with Formula Variable

    Hi Friends,
    I have a peculiar issue here. We upgraded from 3.5 to 7.0 recently. Some of our Bex queries have been behaving abnormally after this. In these queeries,
    we have some key figures which use formula variables (ready for input and mandatory) in 3.5. User can enter either 1 or 0. The actual key figure is multiplied to the formula variable so, the entire column gets the actual key figure value if the user enters a value '1' and the gets the value 0 if the user enters '0' in the formula variables. Zero suppression is activated on the rows and columns and this report. This technique was used successfully to show/hide a column.
    After upgrade, the same query works but, the zero suppression is not working. When the user enters a value of '0' in these formula variables, all the entries in the column for the key figure are displayed as 0 but the column is still displayed. It is like the zero suppression setting is not active at all.
    I created one of those queries in Bex 7.0 to see if that works but, the issue still exits. Have anyone come across this kind of a scenario? Please get back to me if anyone has any idea on this situation.
    Thanks and Regards
    Subray Hegde

    Which SP level are you at in BI 7? There is an OSS Note that would need to be applied if you're on lower than SP10. That note is:
    [OSS Note 964756 - Formula variables with replacement from difference in BI 7.0|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=964756]

  • When does FRM-40735 error come

    when does the error FRM-40735 and ORA-304500 come.What does it mean.
    thank you

    The FRM is an unhandled exception error message and the ORA message is to do with a problem in ORA_FFI.
    Place and exception handler with the code:
    EXCEPTION
    WHEN OTHERS THEN
    FOR i IN 1..Toll_Err.NErrors LOOP
    PAUSE;
    Tool_Err.Pop;
    END LOOP;
    END;
    Regards
    Grant Ronald
    Forms Product Management

  • Exception Message when calling WebService component

    Hi,
    We are using a Webservice component in our workflow. I want to know if there is a way to get the Exception message when an exception occurs in the Webservice call. We want to be able to handle the exception in the Livecycle layer and not the Flex layer.
    When I draw a route from the Exception lightning bolt and select the type of Exception, it goes to the route when an exception occurs but I have not found a way to get the Exception message.
    Does anyone know how to do that?
    Thanks in Advance.
    A

    I'm using Linux in my server, and yes, my application is configured to run through an Http Proxy-server =)
    When running the application on local, I included the Ip of my webservice in the proxy exceptions, so It wasn't blocked.
    Maybe I have to remove the webService Ip from the exceptions, when running in the server.
    I'll provide you with more details of my server as soon as the person in charge arrives.
    But then, you think that exception is raised whenever the proxy or the application is blocking the webservice ip?
    If that's so, I think I have a good track to keep searching.

  • Exception Uncaught - 'CX_WD_CONTEXT' - WEBDYNPRO

    Hello,
    I have changed the main view of a webdynpro to introduce a tabstrip with two tabs. But when I have tried to execute the webdynpro, I got a DUMP:
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Could not find attribute TABLA_EMPLEADOS
    The attribute TABLA_EMPLEADOS is a structure, and it's defined at main's view's context, as at component controller's context. The first one is mapped to the second.
    More details of the DUMP:
    - The code's point which generate the exception:
       1 method if_wd_context_node_info~get_attribute .
        2   data:
        3                  rtti        type ref to cl_abap_typedescr.
        4   field-symbols: <attr_info> type wdr_context_attribute_info.
        5
        6   if me->attributes is initial.
        7     me->map_node_info( ).
        8   endif.
        9
       10   read table me->attributes->* into attribute_info with table key name = name.
       11   if sy-subrc <> 0.
       12     if me->_all_attributes_read = abap_false.
       13       getall_attributes( ).
       14       read table me->attributes->* into attribute_info with table key name = name.
       15       if sy-subrc <> 0.
    >>>>>         raise exception type cx_wd_context exporting textid = cx_wd_context=>attribute_not_f
       17       endif.
       18     else.
       19       raise exception type cx_wd_context exporting textid = cx_wd_context=>attribute_not_fou
       20     endif.
       21   endif.
    - And the hierarchy of processes/methods:
    Method: IF_WD_CONTEXT_NODE_INFO~GET_ATTRIBUTE of program CL_WDR_CONTEXT_NODE_INFO======CP
    Method: IF_WD_CONTEXT_ELEMENT~GET_ATTRIBUTE of program CL_WDR_CONTEXT_ELEMENT========CP
    Method: GET_ATTRIBUTE_INTERNAL of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L3STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Well, I passed about 5 hours investigating, testing, and so on, but I always get the same exception uncaught. I think I have missed some step at the inclusion of the tabstrip, but I don't know how to manage it.
    Thank you for your time and help!!

    In your view Some where you have binded this TABLA_EMPLEADOS to proporties of the UI element, is this an attribute inside à node ? , you may have to check THE cardinality of THE node, it is 0..1 or 0..n then it is possible that You get dump like this. You can try change that to 1..1 or 1..n.

  • Strange issue encountered when doing costing run

    Dear experts,
    I encountered a strange problem when doing costign run use CK40N.
    I created a costing run on 23.12.2010 In the costing  run the validity was set  from 01.01.2011 to 31.12.2011, I did all the steps except release, all steps were done successfully
    I released costing run on 01.01.2011, but when I hit a material to check the costing date, found the costing was only avaliable to 31.01.2011 not 31.12.2011.
    I was wondering if any actions or modifications done will affact on the costing date of material?
    Have you ever meet this problems?
    Please give me some help.
    Thanks for your time and concern.
    Regards,
    Anna

    Hi Sarada & ajay
    Thanks for your comment.
    The most strange thing is...
    When I display costing run, the valid to date is 31.12.2011, but in material, it shows 31.01.2011....
    I did test again, to change the valid to date in CK40N of the costing run, but the result is, date in material alway the same with what displayed in costing run in T-code CK40N.
    One more information, we usually do costing run per month, and we just change to valid date to end of year from 2011.
    At first I thought it might have some relation with modifications to costing variant, but after doing test, the modifications will not affect.
    The valid date in material should always be the same with what displayed in costing run.
    And after the first step 'Selection' in costing run, the date will not be changed.
    So I could not come out with any idea with issue......

Maybe you are looking for

  • Pages not loading completely

    I am seeing intermittent issues with web pages not loading completely, or taking a long time to load. Some times embedded images will not load. The page will often load, but the page loading icon in chrome will carry on spinning.  This is happening p

  • Help with internet PDF files with Firefox

    I recently changed my default PDF reader to Adobe for the snapshot function, and now I can't open up any PDF in Firefox.  Help?

  • IWeb 1.0.2 modifications in iWeb 2.0.2

    In iWeb 1.0.2 I make modifications in the .js files to delete the controller and autoplay and loop the music for both Macs and PCs and modifications in the slideshow.html files to prevent the slideshow from looping, remove the reflections, and change

  • Wuf-209 failed in Forms 64bit (11.1.2.1.0)

    We are using webutil to try to write to the local LPT1 printer from our form. When we execute: WebUtil_File.Copy_File('c:users\temp\brick.txt', 'LPT1'); The file copy happens to the attached printer, but the "WUF-209: Copy file failed" error pops up.

  • Core Duo overheating

    I have had a Core Duo mini for about 5 months. Two weeks ago I installed 2 gb of RAM and everything seemed fine. However, two days ago I noticed the computer was spontaneously rebooting. I checked the CPU temperature and both processors were running