Exception when running form in debug mode

Hello,
appreciate any help on this.
everything is fine when oracle forms 10g is run with debug=no, but when debug=yes
throws this exception in the sun java console.
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
java.lang.ClassNotFoundException: Execute
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
It s supposed to show the debug window with the host name and port number to do the attach debug in builder but instead throws the above.
if i dont mention port=xxxx in the default configuration in formsweb but just have debug=yes , the applet just crashes.

You can also check Francois Degrelle excellent answer to the same question:
Running a form in debug mode

Similar Messages

Run form in debug mode with windows vista

hi guys
plz help me
i'm using oracle forms 10g r2 on windows vista home primume and everything is ok but
when i need to run any form in debug mode i get the following
the jvm 1.4 give me jvm is aborting after that
the oc4j give me the following error frm-92101 there was a failure in the form server during start up
thanks

Hi Manoj,
You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
Let me know if you need more information.
Thanks,
Pawan

Running Forms in Debug Mode (appletviewer / J-Initiater)

Hi All,
I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
Thanks,
Easo

Attaching to a Form running outside the builder
The advantage of attaching the debugger to a Form that runs outside of the Builder is that the Form can be running on a different machine other than the one debugging it. The configuration gives an end user the opportunity to run the Form and encounter errors while the developer debugs interactively with the user.
To start debugging a Form that runs outside the Builder, the Form must be invoked with the parameter Debug=yes passed in the URL. This parameter will invoke a dialog that displays the host name and port number.
In the Forms Builder, open the FMB for the running Form, and select Debug | Attach Debug. You'll need to supply the host name and port number to start debugging the running Form.

Running Form in Debug Mode: How? (Appletviewer/J initiater)

Hi All,
I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
Thanks,
Easo

You can also check Francois Degrelle excellent answer to the same question:
Running a form in debug mode

How to run the forms under debug Mode?

Hi,
I run my form under debug mode by introducing a break point on a trigger. But i am receive the following error how to solve this issue.
JVM aborting and followed by the following one.
FRM-92101: There was a failure in the forms server during startup.
This could happend due to invalid configuration.
Please look into the Web-server log files for details.and additional information from Java console.
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)I am running on my standalone machine.
Where and what file i want to look into this to solve this issue.
Good help will be appreciated. Thank in advance.
kanish

Kanish,
Lets start with a few of the basics, shall we. What JVM are you using (Jinit or Sun JRE and the version)? Based on the error you posted, I can infer that you are using Forms 10.1.2.0? Are you running a custom configuration in the formsweb.cfg and default.env? This could be the cause if you have modified the CLASSPATH setting in the default.env excluding core .jar files.
Typically, the FRM-92101 error is caused by a Java error; either a .jar is not found or invalid or not compatible with JVM, etc.
Have you tried clearing your Java Cache to check for a corrupt .jar?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Eroor in eclipse when i have run TOMCAT in debuge mode web service debuging

hello all,
i have a serious problem with debug my web service. I set local variable in eclipse (-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000). And now if i run TOMCAT in normal mode all worked fine and i run remote java application fine, but if i run TOMCAT in debug mode, eclipse in console return error:
"Error occurred during initialization of VM
agent library failed to init: jdwp
ERROR: Cannot load this JVM TI agent twice, check your java command line for duplicate jdwp options."
If anyone have this problem please tell me how to resolved it.
Thank for help.

Eclipse is kind of a competing product so this is not the best place to ask the question. With that most will be nice enough to lend a hand. I suggest ensuring that all other instances of tomcat are stopped then try again. In the Debug perspective ensure there are no servers running with the same name as the one you are attempting to use. If all else fails ensure there are no tomcat process running if they are kill them. Finally, if you cant get it to work reboot. If still no good the Eclipse might be a better place to go.

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Error when starting Weblogic in debug mode

Hi there
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic
Server is no longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Server shutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)

Thanks for the suggestion.
Unfortunatley the port is definately free/available during startup.
Stephane Kergozien <[email protected]> wrote:
Maark,
Before starting your server, please could you check that the port is
not used by one
other process. You can use the netstat command to do this.
Regards
Stephane
Mark wrote:
Hi there
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address alreadyin use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <TheWebLogic
Server is no longer listening for connections. You should probablyrestart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdownsequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Servershutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unableto load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)--
Regards,
Stephane Kergozien
BEA Support

This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Program running fine in Debug mode but failing in direct execution

Hi All,
I am facing a peculiar problem, I have created a report that create STO then Delivery and then Shipment one after one. I have used BAPI to do so. If STO creation is successful then Create Delivery and if delivery creation is also successfull then create Shipment.
When I run this program by pressing execute button it is only creating STO and coming out ,but if I run it in Debug mode I get all the three( STO, Delivey,Shipment). Since it run fine in debug so I can't found where the problem is.
Can any one help???
Regards
Hemant

Hi guys,
A learning for me .... how important WAIt parmeter is in commit work .. Initially i have not set WAIT paramater in commit BAPI to X due to this further processing.. Delivery and Shipment creation was failing in direct execution ... as after STO creation I was reding EKPO and that was failing in direct execution , but in backgroung everything was ok.
Thanks for your time.
Cheers
Hemant

Launching from web a form in debug mode (?!)

Hello,
I have Developer Suite 10g with WebUtil 1.6. I am playing with a form, which has an attached library from which use a function. This function doesn't function properly and I would like to debug it.
Problem: in Forms Developer, when I launch the form in DEBUG MODE, it launches my form using the webutil configuration section. The URL looks like this:
http://localhost:8889/forms/frmservlet?config=webutil
I need to launch the form with another configuration section and at the same time in debug mode.
How should I do this?
Thank you in advacne for the help.
daniela

forms-builder:
look at Edit-Preferences, go to the last tab (Runtime) and then look at "Application Server URL"
there you can change the used section of your forms builder configuration

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

Hello guys,
            Problem has been solved -
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
1. If you install 64 bit oracle this is not an issue. Install 64 bit oracle.
2. Download odp.net 32 bit from below link:-
    ODP.NET Managed Driver Beta Download</title><meta name="Title" content="ODP.NET Managed Driver B…
3. installed the odp.net.
4. open the visual studio 2010.
5.Select new - project - asp.net web application - project name -ok
6.select tools- > connect to database- then follow the following steps
                         i> user name - your user name/client username (example -- hr)
                         ii> password -- enter your password/client password (example- hr)
                        iii>select connection type -- if you want to connect client database then- select EZ connect other wise select tns
                        iv>test the connection- then you will get connection succeed.
                        v> then click ok
Thanks
Chandrashekhar

You do not need to do anything in VS. You do need to configure both tnsnames.ora files, because the drivers do not share any data.
Please see:
http://sqlblog.com/blogs/jorg_klein/archive/2011/06/09/ssis-connect-to-oracle-on-a-64-bit-machine.aspx

Project runs Ok in debug mode but not in release mode

I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECCEA4C4CC7DE86257038004D88AE?opendocument&node=13206... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54ADDA3DC33D86257038004E55E6?opendocument&node=13206... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C7FD41BF3D08625702E0072E294?opendocument&node=13206...
This should solve your problem.

How to run labview in debug mode

Two questions:
1. how to run labview in debug mode
2. how to save default text values in labview

Hi,
consider i have streaming bits of data as input who length varies each time. I need to select 11 bits at a time and apply (15,11) hamming coding for the inputs till the input is stopped.
I have designed the hamming encoding and decoding block. I need a methodology to select 11 bits at a time from the input and provide to the hamming encoder.
eg: if input is 1100 bits, output must be 1500 bits.
I have uploaded the encoder and the decoder part. Please suggest me the design to read the input and append the output.
Attachments:
project_HammingEncode.vi ‏19 KB
project_HammingDecode.vi ‏22 KB

Exception when running form in debug mode

Similar Messages

Maybe you are looking for