Exception when trying to view a PKI Credential Mapping Provider

Hi all,
I encounter the following issues right after I installed Weblogic 10.0 with ALSB 3.0:
1. I created a new ALSB domain and when I start it, right away I get the following exception:
<Alert> <ALSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have AquaLogic Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
2. I go to the WLS console and create a new PKI Credential Mapping Provider. Right after I create a new one, when I click on it to edit it, I get the following error messages:
-- in the web console:
The object that you were viewing has been deleted, either by you or another user. Please make another selection.
-- in the output logs:
<Error> <Console> <BEA-240003> <Console encountered the following error java.lang.ClassNotFoundException: [B
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:286)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:259)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:35)
at org.apache.struts.util.RequestUtils.applicationClass(RequestUtils.java:117)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.createSecondaryForm(ConsolePageFlowRequestProcessor.java:605)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionForm(ConsolePageFlowRequestProcessor.java:574)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:202)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1170)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
(etc)
Does anyone have an idea what's going on? Is there a workaround for this problem?
One other thing to mention is that we are locked into using the WLS 10.0 / ALSB 3.0 versions since we are setting up a staging environment that has to reproduce the production.
Many thanks in advance for any help or pointers!!
Nabres
Edited by: user9234821 on Jun 21, 2011 3:11 PM

As a workaround, you could export your domain configuration from production with wlst ( to create the .py scripts ).

Similar Messages

Getting IO exception when trying to view the joblog.log file

Hi,
We are unable to view the joblog.log file. The joblog file is created in server path, but when we trying to view/read/download the joblog.log file we are getting JCS-108004: An IO exception occurred accessing a local file error.
server path: xxx/log/processerver_.log.
But we are able to view the reports through redwood for these extensions (*. html, *.csv. *. xml.).
server path: xxx/lis/sys_.html
Can anybody help on this issue.
Thanks,
Suresh.

Dear Suresh,
Your Question is not clear to me. what i understood is you can abel to check log in redwood , and unable to open in server at os level? if it is correct, login to server with cps installation user, ten i hope you can able to open files, check the file permissions in init file in $JCS_HOME/admin directory, check the permissions given, and also check listener port value, is it correct?
thanks and regards
Muhammad Asif

Instance Manager Unhandled Exception when trying to view the status!

Hi,
I got an error while trying to view the failed instances in the Instance manager. Can any one please help how to fix this tomcat error.
Unhandled Exception Back | Exit
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 at java.util.ArrayList.RangeCheck(ArrayList.java:507) at java.util.ArrayList.get(ArrayList.java:324) at com.crystaldecisions.sdk.occa.infostore.internal.al.get(Unknown Source) at org.apache.jsp.instancesByStatus.main_jsp._jspService(main_jsp.java:439) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Thread.java:534)
Thanks,
Kalyan.

Hi Kalyan,
Which is the Business Objects version at your end?Are you running XI R1 or XI R2?
Do you have any Service Packs, Critical, Monthly, or Weekly hotfixes installed?
If you have no service packs installed, please install the latest service pack from our SAP Support Portal.
I hope this the issue gets resolved by this.
Regards,
Arun Sasi

Palm Desktop shuts down when trying to view calendar by month

I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2). Everything is normal except, suddenly, I cannot view my calendar in monthly view. Daily, weekly and yearly all work fine. Desktop shuts down when trying to view in monthly view. I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version. Nothing seems to enable me to view the calendar in monthly view. This is a spontaneous event. I've been running Desktop on a Vista Ultimate system since February without incident. I have no idea about how to solve this.
Thanks
Post relates to: Palm TX

Well, here's where we are now. It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch. I'm going to overwrite the entire handheld with the office desktop file. As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files. Am I correct about this? Do I need to do a clean uninstall?
Post relates to: Palm TX

ClassCastExceptions when trying to view documents from a custom document provider

I have a very basic extension of DefaultDocument that I am using as
our document representation. In the recommended strategy #3 we are
told that we need to have something that extends DocumentDef, which
this fits. However, in the deployment descriptor by default
DocumentImpl is specified. Can anyone explain to me the relationship
between DocumentImpl and DocumentDef? When trying to view documents I
get a class cast exception which also occurs if I retrofit my document
provider to use DefaultDocument instead of my custom Document. It
appears to me this is happening for a good reason... DocumentImpl is
not related to DocumentDef or at least at the very minimum DocumentDef
is not an extension or implementation of DocumentImpl.
Any help is much appreciated,
Erik

In case someone else actually reads this, it was an id10t error on my part.
[email protected] (Erik Schalburg) wrote in message news:<[email protected]>...
I have a very basic extension of DefaultDocument that I am using as
our document representation. In the recommended strategy #3 we are
told that we need to have something that extends DocumentDef, which
this fits. However, in the deployment descriptor by default
DocumentImpl is specified. Can anyone explain to me the relationship
between DocumentImpl and DocumentDef? When trying to view documents I
get a class cast exception which also occurs if I retrofit my document
provider to use DefaultDocument instead of my custom Document. It
appears to me this is happening for a good reason... DocumentImpl is
not related to DocumentDef or at least at the very minimum DocumentDef
is not an extension or implementation of DocumentImpl.
Any help is much appreciated,
Erik

Page/JNI: Exception when trying to connect in 1,page/ContentFetcher InterruptedIOExce

We have upgraded to fro m 3.0.8 portal 3.0.9.8.2 9iAS 1.0.2.2 on database 8.1.7
the system is very fast and run for sometime but after a while we see the following errors in Jserv.log file.
this error causes the whole system to hang and we have to restart apache/jserv.
Any light on this issue will be helpful and very much appreciated.
thanks,
Sunil Bontha
25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: init
[25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: Initializing Discoverer 4i Viewer (4.1.37.82)
[25/07/2001 14:09:15:219 CEST] page/oracle.webdb.page.ParallelServlet: init
[25/07/2001 14:09:15:249 CEST] page/JNI: Cache is enabled.
[25/07/2001 14:09:15:299 CEST] page/Starting a pool of 25 handlers.
[25/07/2001 14:09:43:820 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:830 CEST] page/Timeout occurred, label=145 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:830 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher23
[25/07/2001 14:09:43:840 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:840 CEST] page/Timeout occurred, label=293 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:840 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher22
[25/07/2001 14:09:53:864 CEST] page/JNI: Exception when trying to connect in 1.

Hi Avi,
My application is a standalone application trying to access MBeans present in oc4j.
I tried
using the code
props.put(Context.INITIAL_CONTEXT_FACTORY ,"oracle.j2ee.rmi.RMIInitialContextFactory");
obj = (ManagementHome) ctx.lookup("ejb/mgmt/MEJB");
but i am getting the following error.
javax.naming.NameNotFoundException: ejb/mgmt/MEJB not found
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java
:45)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at TestMBean.doSomething(TestMBean.java:90)
at TestMBean.main(TestMBean.java:237)
java.lang.NullPointerException
at TestMBean.doSomething(TestMBean.java:107)
at TestMBean.main(TestMBean.java:237)
Regards
Siva

Exception when trying to post to a page

In NetD we created and submitted a form with JavaScript.
The form looked something like this
<FORM ACTION=pgXYZ METHOD=POST>
<INPUT TYPE=hidden NAME=SPIDERSESSION VALUE=12345>
</FORM>
So now in Jato, we're trying to do the exact same thing,
except that instead of SPIDERSESSION, we use the three Jato
variables. Now the form is like this:
<FORM ACTION=pgXYZ METHOD=POST>
<INPUT TYPE=hidden NAME=GXHC_GX_jst VALUE=12345>
<INPUT TYPE=hidden NAME=GXHC_gx_session_id_ VALUE=12345>
<INPUT TYPE=hidden NAME=pageAttributes VALUE=12345>
</FORM>
Notice we're not submitting to a handler, but just to the page itself.
When we do this, we get an exception:
[02/Oct/2001 16:29:59:4] error: Exception: SERVLET-execution_failed:
Error in executing servlet portalServlet:
javax.servlet.ServletException: The request was not be handled by the
specified handler
Exception Stack Trace:
javax.servlet.ServletException: The request was not be handled by the
specified handler^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.dispatchReque
st(ApplicationServletBase.java:668)^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.processReques
t(ApplicationServletBase.java:428)^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.doPost(Applic
ationServletBase.java:296)^M
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:772)^M
at
com.putnaminvestments.bp.bpServletBase.service(bpServletBase.java:139)
^M
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:865)^M
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)^M
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknow
n Source)^M
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
at com.kivasoft.thread.ThreadBasic.run(Native Method)^M
at java.lang.Thread.run(Thread.java:479)^M
So what are we missing??

Thanks Kostas, good answer.
Todd
----- Original Message -----
From: "Kostas Morfis" <kmorfis@i...>
Sent: Tuesday, October 02, 2001 4:31 PM
Subject: RE: [iPlanet-JATO] Exception when trying to post to a page
Hi Mark
You are trying to submit to a view bean using java script right ?
Notice we're not submitting to a handler, but just to the page itself.You are actually submitting the request to your JATO selvlet base, is that
you intention ?
The exception is being thrown because there is no request handler found.
If you are trying invoke a handleBtnXXXmethod then your form action would
look something like,
<form method="post" action="../myServlet/pgMyPage?pgMypage.btnMyButton=">
This adds to the request an appropriate handler as a parameter. Another
option could be to add a hidden field
with the same name as your button.
Attempting to post the form without specifying a request handler will not
work eg:
<form method="post" action="../myServlet/pgMyPage">
This throws a ServletException("The request was not be handled by the
specified handler")
because you are doing a post to ViewBean from a form which implies youwant
to handle some kind web action.
The way JATO enforces this is to check for the prescence of pageAttributes
in the request (implemented using hidden fields)
which you have in your form.
Kostas
-----Original Message-----
From: Mark_Dubinsky@p... [mailto:<a href="/group/SunONE-JATO/post?protectID=174166091163159191130171186101229144026098131198043123114199021239115076086020224">Mark_Dubinsky@p...</a>]
Sent: Tuesday, October 02, 2001 10:04 PM
Subject: [iPlanet-JATO] Exception when trying to post to a page
In NetD we created and submitted a form with JavaScript.
The form looked something like this
<FORM ACTION=pgXYZ METHOD=POST>
<INPUT TYPE=hidden NAME=SPIDERSESSION VALUE=12345>
</FORM>
So now in Jato, we're trying to do the exact same thing,
except that instead of SPIDERSESSION, we use the three Jato
variables. Now the form is like this:
<FORM ACTION=pgXYZ METHOD=POST>
<INPUT TYPE=hidden NAME=GXHC_GX_jst VALUE=12345>
<INPUT TYPE=hidden NAME=GXHC_gx_session_id_ VALUE=12345>
<INPUT TYPE=hidden NAME=pageAttributes VALUE=12345>
</FORM>
Notice we're not submitting to a handler, but just to the page itself.
When we do this, we get an exception:
[02/Oct/2001 16:29:59:4] error: Exception: SERVLET-execution_failed:
Error in executing servlet portalServlet:
javax.servlet.ServletException: The request was not be handled by the
specified handler
Exception Stack Trace:
javax.servlet.ServletException: The request was not be handled by the
specified handler^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.dispatchReque
st(ApplicationServletBase.java:668)^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.processReques
t(ApplicationServletBase.java:428)^M
at
com.putnaminvestments.common.jato.ApplicationServletBase.doPost(Applic
ationServletBase.java:296)^M
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:772)^M
at
com.putnaminvestments.bp.bpServletBase.service(bpServletBase.java:139)
^M
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:865)^M
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)^M
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknow
n Source)^M
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
at com.kivasoft.thread.ThreadBasic.run(Native Method)^M
at java.lang.Thread.run(Thread.java:479)^M
So what are we missing??
[email protected]
[Non-text portions of this message have been removed]
[email protected]

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

ERROR (0×0107, 0×0000) WHEN TRYING TO VIEW A VM CONSOLE

Hi,
Getting error (0×0107, 0×0000) when trying to view vm console via vmm installed on a machine registered to different domain.
When tried to connect to the VM it will be asked to authenticate against the host and then we will see a warning about an un trusted certificate
and once we click OK we will receive the (0×0107, 0×0000) message.
Tried importing certificate of the hosts to the Trusted Root still seeing the same error. Can anyone please help?

Hi sathish777,
Because each domain has its secure boundary ,domain trust is needed for comunication between different domain .
As a workaround , you may try to logon the "client" locally to be a workgroup machine then use hvremote.swf to manage the hyper-v server remotely :
https://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When trying to view a pdf from IE10 I get a small square with an X and not the document.

When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

Hi,
We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
Before running these steps please make sure yours indeed is the same problem.
Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
Let me know how it goes.
Thank You.

Error when trying to view vids on Facebook on Revolution- Have to force close

Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago

DionM_VZW wrote:
bulldog69 wrote:
Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago
Hello bulldog69! So, these videos you're trying to watch. Were they posted using your phone or someone else's phone? Are the videos viewable using a desktop/laptop computer?
The videos are posted on Facebook that someone else posted from phone and my own. It is friends videos which always worked on Fascinate and vids work great on computer. I think a few days ago was able to view one and today same thing have to click force close and even tried using our wifi and same problem. Pulled battery and restarted no luck. So far vids on YouTube work great on Revolution

Error when trying to view purchased items in app store

My ipad has an error when trying to view my "purchased" items in app store, keeps "Loading...." for a while and then close the app.
All the other options works well (featured, top charts, genius, updates...)
I already turn off / on the ipad many times, same problem....

I have the same problem with my iPhone 4s! Need a solution from Apple!

Error when trying to view YouTube videos

I get the following error when trying to view YouTube videos in some wireless hotspots; "The server is not correctly configured". It used to work fine at these locations.

Maybe not as many people reply as you think should because this site doesn't freaking work either!
Took me ten minutes to log in! Kept getting stupid error messages telling me this site is undergoing maintenance. Whatever.
Same exact problem here, but Chrome DOES NOT work. Changing DNS servers DOES NOT work either. It doesn't work for a lot of people.
https://productforums.google.com/forum/#!topic/youtube/axsb7XPieK0
EDIT**
WTF this site is more broken than youtube! Constant errors and constantly unresponsive with "greyed out" buttons!
Is there any competent people left on the planet to fix this crap!?

Can see list of old emails, but error message when trying to view message.

Ok, after a Mail crash (10.4.1), there were no accounts listed and of course no old emails, sent or in the inbox, were visible.
We reentered all the account info, as if we were starting anew, and now we are able to see the list of all old emails in the inbox and sent mailbox, but when we click on any message before the crash, we get this error message:
The message from David Crandon, ([email protected]), concerning (the subject of the email), has not been downloaded from the server. You need to take the account online in order to download it.
Now, obviously, the accounts are online because we can send and receive new emails with no problem, and of course, the old emails aren't going to be on the server anymore.
Can anyone help?
Thanks.

Well, didn't work. I spent an hour and a half just trying to get my 76yr old uncle to back able to drag and drop into the correct folder, and then trying to find the file when he didn't....!
Anyway, it didn't work. After removing the Envelope Index file, and reimporting the messages, everything was the same. He could still see all his old emails in the list in Mail, but got the same error message when trying to view them.
Then, we rebuilt the inbox, and now none of his old messages are visible! However, they are still on the computer.
All his old emails are ".emlx" files and if we click directly on one of them, then Mail will launch and display the message properly in it's own window. But again, we get the above error message if we try to view it by selecting it from the message list in mail.
One interesting thing...in the Library->Mail folder their are two folders, "Mailboxes" and "Mailboxes.mbox". Both at the same level. It's the Mailboxes.mbox folder that has all his old emails. Although all the old ones have the suffix ".elmx". In the Mailboxes folder are all the new emails since we reset all the prefs in Mail after the crash a couple of days ago.
Anymore help please to get mail to recognize all these old emails?
Thanks,
David

When Trying to View an .mov File, PSE 8.0 Crashes... Help

When Trying to View an .mov File, PSE 8.0 Crashes... Help I was able to view these .mov files without any problem on ACDSee 2.5, any help will be appreciated to determine why .mov files crashe in the PSE 8.0 viewer....
Best Regards,
Larry

Thanks for the reply Larry. This is frustrating, and Adobe support is useless. It all works on my vista 64 bit system, but not on the 32 bit system. The odd thing is that I can open .mov files in Editor by going to File-Import from video, select "all file types" and choose a quicktime movie and it will open and run just fine. I can take stills off the movie. But if I try to open the same movie file with File-Open...I get an error message "Cannot open file......wrong file type" In organizer everything just crashes. I suspect there are some security issues in Vista that won't allow PSE to access Quicktime.
Too bad Windows 7 didn't fix the problem. I was starting to head that way. I will let you know if I find a solution.
Ron

Exception when trying to view a PKI Credential Mapping Provider

Similar Messages

Maybe you are looking for