Exceptions in Query designer

Hello experts,
I have a basic doubt on Exceptions in the Query designer.
Say I create an exception which says any value between 1 and 10 is good and should have a certain color and another exception on the same key figure which says that values between 8 and 12 are bad and denote with a different color.
Now I get a value 0f 9 for my Kf then how does BI process the exception?
Thanks and Regards
Ankit

Hi,
You have to make exception for values 1-10 as per the requirement.
and starting from 11-12 give another with diff color and notation. Like wise it's better to identify.
Reg
Pra

Similar Messages

How to create an exception in query designer?

Hi,
I am new to BW. I created an exception and set the from and to limits with an alert level of green for an amount column. When I run this query in the web, it does not change the color to green for the condition in the amount column. What is the validity area of exception? Do I need to enter anything there? I am in BW 3.5

Hi,
You need to change the default option Result only to all the cells in the second tab(cell defining) of Exceptions in query designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/615f64816311d38b170000e8284689/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
Hope this helps............
Rgs,
Ravikanth.

BEx Query Designer,点击新建,选择信息范围时,提示:严重服务器错误

各位好
我在新建bw query时，点击新建按钮，选择信息范围，然后就没反应了，估计10分钟后，弹出一个消息：
严重服务器错误
服务器会话可能已终止；此连接不再存在或不稳定
再次登录到服务器以创建新连接
getnodes: rfc exception
在st22中也查看了，是一个超时的error：
The program "SAPLRZX0" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
但我前几天都没这样的错误，并且，新增的信息提供者也没超过50个啊，怎么会超时呢？
请问各位有遇到类似问题的吗？
我在google上找了，有一个人的解决方法：
I resolved my issue. Just want to share with you the following.
ST22 shown: MOVE_TO_LIT_NOTALLOWED_NODATA.
Short text
Error at assignment: Overwritten protected field. Before we upgraded to Stack 15, we have applied Notes 110997 at Class "CL_RSD_MULTIPROV_CONSTRUCT"
in Method "_AGGR_DTA". And this additional code was causing the dump when create new Query.
I reverted the coding back to original and the issue gone immediately.
但我最近都未对系统做任何修改啊，并且查看这个method，和其他正常系统没有任何不同啊
求解？

补充一点，我通过查询，找到相应的信息提供者，然后进行设计是没有任何问题的，但先信息范围，显示所有的对象时，就提示超时了
这有一位和我相同的情况：
"BExOpenSaveServices - GetNodes: RFC Exception" in Query Designer
Re: Problem Help me plz
里面，其中有一位提到：
Try open any query in RSRT transaction, if an error requesting the rendering buffers , then call a
"/$SYNC" transaction on SAP/BW.
After runs "/$SYNC", try open any query with Query Designer, RSRT or Bex (Web) Analyzer.
这个u201C/$SYNCu201D缓冲区复原，执行了也没什么变化，并且，我那个在rsrt执行时也是成功的

BEX Query Designer - Application Error

Dear experts,
I have a problem with my BEX Query Designer. Whenever I tried to save a query, I caught the following exception:
BEX Query Designer has encountered a problem and cannot proceed with the current action. We are sorry for the inconvenience.
Additional Information:
QD revision 300
Internal Error ID: E-ONGUIUNHANDLEDEXCEPTION
Error Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'
Can someone help me to solve the problem?
I am using the following version:
BI AddOn 7.X (based on 7.10), Support Package 3, Revision 520

From the log:
5:01:38 PM.31 ########## --> com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException ##########
-EXCEPTION-START- 5:01:38 PM.31: ---
Exception Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'.
Exception    at com.sap.bi.et.QueryDesigner.QDbElement.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbQuery.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.ToTables(Hashtable iTables, QDcElement iElementsToSave, QDbCopyInfo iCopyInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.Save(String iRole, String iNode)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.Save(QDbElement iElement, Boolean iOutputSuccess)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.Save(QDbElement iOriginalElement, QDbElement iSaveElement)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveQuery.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
   at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
   at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   at System.Windows.Forms.Control.WndProcException(Exception e)
   at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.Run(Form mainForm)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
-EXCEPTION-END----

Exception in BEX Query Designer 7.10 when restricting dataprovider in filte

Hello,
when I build a query in the Query Designer 7.10 and try to restrict the infoprovider in the filter
to access a mulitprovider I get the exception:
"Unhandled exception has occurred in your application.....
Index was out of range........"
Our System:
Windows XP Servicepack 2
.Net 2.0 Serivcepack 1
Office 2003
SAP GUI 7.10 Patchlevel 9
BI Addon + Serivcepack 7
BW 3.5 Addon + Servicepack 4
Netweaver 7.00 packagelevel 11
Has anybody seen the same erro or a oss note which fixes this problem?
Thanks.
Regards, Lars.

Hi,
I have not encountered this problem in the last days. We have made an upgrade
in the support package level from 11 to 16 for Netweaver Basis and 12 to 18 for
Netweaver BI. Sometimes there can arise problems when the support package level
of the Application Server is to low in comparision to the SAP GUI.
Maybe this was the problem. I am not sure.
I would advise you to install the latest upgrades of your SAP GUI and keep the application
server on a high support package level.
Sorry, I can't give any other hint.
Regards, Lars.

Can we see value of CKF in exception cell in query designer-please reply

Hello all,
I am defining a query in query designer in which i am using the exception cells, I am having two structures in this query. Now at the intersection of these two structure on one particular line I am trying to define the properties of that cell. I selected new selection and after that I added the calculated key figure that I had created. So should that cell show me the value of the calculated key figure (that is what I thought, that if I can put my CKF in that cell it will show me the value for that CKF). I am seeing different results.
Is there any way you can actually show the value of calculated key figure in that particular cell.
Thanks in advance,
Raj

Hi Raj,
You can add Calculated key figure,RKF and even single key figures .The cells are independent of each other and that should not be an issue.
Whatever the key figure is in the cell it should show that value.
Just check again whether you have put any key figure into the selections of the structures
There should be no key fgures into selctions.
Hope it helps
Thanks

BEx Query Designer and Exceptions

I have a simple enough task. I was tasked, with marking items on a query with an exception, however the value is not static. I have a column marked hours, and five columns for each day of the week. The current day with data should yield an exception if the current day has less hours the the calculated hours column. So my first approach was to create a formula where I evaluate both the hours calculated from the query and the current day. I called this field fday1. I created an exception stating that if fday1 = 1 then to mark the field Bad3. but I want the affected structure to be the Actual Day such my column days are: Day 1 (current date), Day 2 (current date + 1) etc... but when I visit the query (ie, adhoc query) only the formula field fday1 has the exception day triggered. In the exceptions list I define the keyfigure fDay1 (time of evaluation [before list calculation]) Under the display tab I have exception affects data cells for the following structure elements: Day 1 (current date).
like If I execute this query through the portal the exception shows up correctly on the proper field. if I execute the query through the adhoc (BEx Ad Hoc Analysis) view, then the wrong field has the exception.
any thoughts on a better way to approach this query?

Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help.

Ad-hoc Query Designer: Create Exception

Hi there,
somehow, my Ad-hoc Query designer is going crazy or something. I don't know whether it is a technical error.... hope you can help me.
When I create an exception, if I don't set the standard operator AND all characteristics to "All" the exception is displayed only for the results.
When I set all these operators to "All", then the results are also marked in the respective colours. However, I only want to mark everything but the results, but if I choose for this option, only the overall result is displayed.
Can you help me?
Thanks,
Sabine

Hi Sabine,
I think I did not fully get what your requirement is, please elaborate on what you want to be displayed. Something general
1. in tab "exception values" you can specify the key figures on which the exceptions are to be applied and assign value ranges to different colors / levels
2. in tab "validity area of exception" you can specify
a) to apply the exception on all or totals only (choicebox), this setting is valid for all characteristics not mentioned in the field below
b) to apply the exception on everything, totals, everything but totals, fixed value, hierarchy level corresponding to a certain characteristic
Best regards,
Björn

Exceptional Aggregation Option at Query Level in BW 3.5 Query Designer

Hi all,
I want to use Exceptional aggregation with reference char 0CALDAY,on Formula keyfigure in the Query designer(BW3.5).
But I am not getting that option when I went into Properties of that Keyfigure.So please Suggest me where I will Find that Exceptional Aggregation option & Ref.Char at the Query level.
Thanks,
Kiran Manyam

Hi
In the Key Figure Properties dialog box, choose Enhance >>. The Aggregation Behavior field is added to the dialog box.
You can make settings for the aggregation of the calculated key figure and the time that the calculated key figure is calculated here. Depending on the complexity of the formula, you can select various settings in the enhanced properties of the calculated key figure. The following types of calculated key figures with the corresponding formula complexity are available:
http://help.sap.com/saphelp_nw04/helpdata/en/6f/56853c08c7aa11e10000000a11405a/frameset.htm
Hope it helps

Query Designer Exception

Hi,
In query designer 3.5, the exception is available in 3 traffic light color --> red, amber and green.
Is there any setting that we can include other color in the exception ?
Thanks.

Hi Jonathan,
*In Exception of BEx Query Designer 3.5, you can't have customized color as you wish.
*As i told you earlier, there are 9 different Alert levels. Just try using all these 9 alert levels in any sample report, so that you can see what are the 9 different colors that you can get in your reports.
As per you initial question, you wanted to have an additional color in the exception apart from the basic three. You can have that using any 4 different Alert levels of the whole 9levels.
(NOTE: You can use some other advanced reporting tools, where you can have the option of changing the colors in the alerts as you wish)
Hope it helps you.
Warm Regards
Preethi R.

Can we put condition for color in bex query designer

hi all,
can any one guide me how to put a condition for color settings in query designer
for example:
i have a key figure like ANSWERED%.in analyser it should display in red if answered% exceeds 95%.
please help me in this issue.
regards
Vamshi D Krishna.

Hi,
Use Exceptions while designing your Query.
Please go through the link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm

How to write a condition in BEX Query Designer

Hi
How can i write a condition in Query Designer
Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
But i char assigment of a condition i find 4 option
How can i achieve this
Thanks

Hi Aurun,
Thanks for the help,Really appreciated
As this is my first enhancement using ABAP & CMOD
What type of key (either Access or developer ) do i require to perform the following enhancement......so that i can raise request with basis team
I shall be great ful if u can asnwer below question
First, you need to create a variable for expiry date with processing type as customer exit, and then give the necessary info.
In details tab, unchk ready for input as we wont be taking the value from the prompt.
Now go to CMOD transaction.
Open the correcsponding project which has the exit code
(How can i identify the project which has exit code)
and go to ZXRSRU001 module inside taht.
Go to the module where u write the exit.
(How to locate the required module)
Then, under i step 1, write the code:
IF I_STEP = 1.
CASE V_NAME (What is 'V_NAME',Is it my variable technical name)
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

In Bex Query designer - Flat is not supported

Hi all,
In Bex query designer,
While execution of the query, the following error is coming .
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Flat mode is not supported!
java.lang.UnsupportedOperationException: Flat mode is not supported!
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
Details: Full Exception Chain
Most important error.
regards
Selvan

Hello,
I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
Open, close, reload of the query does not help.
Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
The "flat-mode" seems to be the "BEx table mode".
SAP hints do not seem to fit here:
- 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
- 874825 SAPBWNews for BW 3.x Front-End Support Package 19
- 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
- 905229 update to SAPTableTree
- 909824 Termination in flat mode when an object is deleted (old?)
- 909827 Incorrect InfoProvider-dependent characteristic values
- 910602 Condition includes too many characteristics (usage of deleted elements)
- 915215 Termination when a query definition is changed (old? visibility of elements?)
- 968273 Cache with flat files: Exception is not caught (does not apply to given error)
Any new solutions?
Best regards
Thomas

Values Bifurcation in BEx Query Designer

Dear BI Gurus,
In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
Please through some light on this issue.
With Regards,
Balachander.S

Hi bala,
This can be achieved by creating two calculated Key figures, Just use else if condition in the formula and use if KF1=KF>0 then KF else 0, here all the positive values will be displayed similarly use if KF2=KF<0 then KF Else 0 it will display all the negative values. But here all the values will be displayed. Just hide the Key figure and display only calculated keyfigures. Else you can use exceptions to differentiate the positive and negative values.
Hope this helps.....
Rgs,
I.R.K

Need help in bex query designer

hi experts ,
Actually we had a ODS where the KPI's values for all weeks are present and also the module.
in the query designer we need to show the targets for respective KPI's modulewise.
the requirement is
module-selections
week no-selection
targetweek1week2---week3
KPI1--10090---90--
90
KPI2--95-7885-----90
based on the module selection the targets values should change and also there should not be any restriction on weeks.
and also exceptions needs to be done for color coding.
we actually implemented cell defination for getting the above requirement , but here the problem is that we need to fix the targets and there is arestriction on the weeks . but the requirement should be dynamic i.e, the targets should be configurable and the weeks should not be restricted.
in the backend ODS all weeks data is present. we just need an idea how to fix these targets and also color coding for the respective KPI's without using cell defination.
Kindly throw some pointers how to acheive this..
thanks in advance,
Madhu

Hi Madhuri,
Ur requirement can be done by using a customer exit variable,keeping any sap stand. time characteristics value.
If u want to define the any selection dynamically,make a new selection with the text variable and call the customer exit variable into it and assaign the corresponding KPI into it and there by u can define the offset value as well.
for writting the customer exit,u need to contact ur ABAP'er and say the requirement.
Hope this helps!!

Exceptions in Query designer

Similar Messages

Maybe you are looking for