Excess tax occuring in miro

Hi expert
I am doing a miro when simulating i am getting excess taxes, my tax are like BED 821%, VAT 12.5% + Add Vat 2.5% - Non set off........my po taxes amount is 1000 when i m doing miro its calculating 1200. some can explain me y its taking excess taxes
regard
nabil

hi expert
Net                196,176.00
Tax                 29,426.40(24,522.00 + 4,904.40)
simulation
A       G/L             Prticular                        Amount
K       100054       xxxxxxx                      227,809.70-
s        154265     GR/IR                            196,176.00
s        455878      vat (12.5%)                26,361.49
s        455879      add vat (2.5 %)           5272.30
regard
nabil

Similar Messages

Tax calculation in MIRO

Hi,
While posting the MIRO for one particular line item the excise duty wrongly calculated (i.e.) @ 16% instead of 8%. I have already check the tax rate maintained for this chapter in J1id and its is maintained as 8%.
Excise invoice is captured @ 8 % in the system. Then why is there an excess amount while doing MIRO.
Please provide your guidence.
Regards
Renuga. A

Hi,
Have you changed the tax rate in J1ID before MIGO or after MIGO? Because tax rate will flow to MIRO from PO. If the tax rate is 16% at the time of PO & GR, that only will flow to MIRO. Reverse the MIRO, MIGO and again re-do the posting. It will work.
Regards,

How to enter multiple TAX codes in MIRO

Dear Experts,
I have a scenerio, I created a purchase order with single line item. But I recieve the Invoice with 3 different tax codes for different amounts.
How can I enter multiple Tax codes in MIRO for a single purchase order.
Regards
SK

Hi
If you have ordered 3 items in your PO for the same vendor with 3 different Tax codes then obviously you have to process the MIRO thrice for each line item and Tax code, since at any given time MIRO can process only One Tax Code at Header Level ( select tax code)
Regards

Tax error in MIRO

Hi,
I am getting tax error in MIRO while posting transaction. "tax amount must not be greater than the tax base" msg FF747.
Invoice amount is 168.91(MIRO)
PO amount is 55.17
Tax amount is 113.74
This error is coming due to Tax amount(113.74) is greater than PO (55.17) amount.
tax amount is greater than due to heavy import duty. User wants to post greater tax amount than actual PO amount, could you please suggest how can it be possible to post in SAP, i am trying to post but i am getting above error.
This error is coming due to Tax amount(113.74) is greater than PO (55.17) amount.
Thanks,
Sam.

Hi Sam,
I too have the same kind of scenario. The VAT value is more than the base amount. Please inform me the solution applied by you.
Thanks in advance,
Pravin.

Cumulative tax amount in MIRO

while doing MIRO for 10 no of line items,,,we maintained taxes for all the line items,,,is there any option to view the Tax amount before simulation for only 5 line items..
could anyone help in this
thanks & regards
ganesh

You can view it at the header level tax tab in mIRO transaction for each line item it will dsplay the tax code description, base amount and tax amount, however it will not display the cummulative value.
BR

Wrong tax amount in MIRO

Dear All
Scenario is explained as below :-
Whenever there will be service tax on software in my PO VAT No Deductable will be calculated on Net Price + Service tax on Software in other case VAT wil be calculated on Net Price only.
ZSER - Condition type for Service tax on Software
ZVRO - VAT Non Deducatble (Copied from JVRO).
I have made changes in tax procedure TAXINN such that ZVRO in calculated on Net Price and Service tax on S/w i.e. ZSER.
I made a PO with net price 290 INR and used condition type [email protected]% and ZVRO@5%. In PO ZSER is 29.87 INR and ZVRO is 15.99 INR whic is correct but at the time of MIRO, when I tick on calculate tax,tax is appearing as 14.50 INR.
I think VAT is getting calculated on 290 INR i.e. 5% of 290 INR = 14.50 INR.
Please suggest how to get correct tax amount in MIRO.
Regards
SK

Dear SK,
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process ->Define Calculation Schema
goto Procedure and check the control data. how you made the calculation of VAT.
If the Calculation is OK in PO than it should be right in MIRO.
Regards,
PK.

Tax code in MIRO Tax tab

Hi,
As of now, MIRO is picking up tax from PO line item.
Now I want to add another tax to that line ...so would like to assign one more tax code to that line through taxes tab in MIRO screen - but I am not able to add it...taxes tab is greyed out (only the tax code from Po appears and calculate tax box ix checked)......so is it that can't I post with 2 taxes for a line?
What should I do in such case?
In short, how to enter the second tax code?
Thanks in advance
SKD

Hello,
I think you don't need add second line item to MIRO PO side. You can split tax line item with your tax code customizing on FTXP.
You must make some customizing.
Define an internal processing key,
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Tax on Sales/Purchases -> Basic Settings -> Check and Change Settings for Tax Processing
You should copy MWS to ZWS
Then assign this key to your tax procedure.
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Tax on Sales/Purchases -> Basic Settings -> Check and Change Settings for Tax Processing
Then you can see it on FTXP for your tax code. For example, you can enter %5 to MWS and %10 to ZMW line on tax master data. When you post an invoice with this tax code and if your amount base is 100,00 for ex. system calculate two line item, first is 5,00 and second is 10,00.
I hope it helps,
Regards,
Burak

Tax value changing MIRO

I created PO with excise duty Rs,100/- but while posting excise invoice i changes to Rs,80/- only. When i am posting vendor invoice changing tax value its giving error message and not able to save invoice. When i tick tax tab in MIRO on basic data it calculate PO tax amount which i am not able to change the reduce tax . If i remove and put manually Rs,80/- the tax value i am not able to save . It showing red tab on balance.
Please suggest me the solution.
Regards,
Ranjan Jha

Got answer from this thred
Taxes not calculated in MIRO
Thanks
Ramesh

How the system calculate the tax code in MIRO ?

Hi
I made PO in SAP for material X and Entered the Tax Code I1 but When, i doing the MIRO in SAP, system automatically taking the another Tax code.Also i am trying to change the tax code in MIRO but s/m not allow to change the Tax code.
I am not also maintained info record also.

Hi,
While doing MIRO the tax code will defaulted from PO for each line item , but to adjust the tax at last you should enter the tax code manually at header level in MIRO and post it.............
In PO it will be defaulted if you maintain the tax code in Purchasing inforecord aor you should enter it manually.....

Exit or BADI when Tax Calculation in MIRO from Purchase order

Hi Gurus,
I Need a Exit or BADI when Tax Calculation in MIRO from Purchase order.
The problem is the tax is automatically calculated from tax code in PO but I want it to be calculated
from PO condition. Is there any exit available by which I can modify the value of tax when ticking the check box of tax calculation in MIRO.

BADI has method COPY_DRSEG_SELKZ but since there only importing paramters and no exporting or changing parametrs you cannot change the values of rseg here.
Try using proper Implicit enahncement by debugging .
For implicit enhancement check
Re: How do we search enhancement point/section
Edited by: Gautam Totekar on May 29, 2009 5:56 PM

How the system pick up the tax code in MIRO

Hi
How the system pick up - the tax code in MIRO ?
i checked vendor master,info record,P.O (Tax code Tab )
Edited by: prashant shinde on Dec 16, 2010 6:41 PM

Hi Prashant ,
If u will check the PO Item detail, there is 5th TAB invoice ,in this tab if u will maintain tax code it will reflect in MIRO
once PO no will maintain in MIRO bydefault system will take Tax code
Regards,
Jyoti

Tax split on MIRO

Hi experts,
I am trying to split tax amounts in MIRO transaction. I was able to split the Tax base amount with the following configuration: SPRO --> Financial Accounting (New) --> Financial Accounting Global Settings (New) --> Tax on Sales/Purchases --> Basic Settings --> Change Field Control for Tax Base Amount.
But when entering to Tax tab in MIRO I am not able to display all the Tax Codes for the splitting lines.
Thanks
Ezequiel

Hi dheeraj,
Yes, it is there in the Tax tab at header level that I am trying to split the values with different tax codes...but no tax code appear.

I can't change the field status of Tax section in MIRO transaction

Hello, I need to change to visible the field status of RTAX1U12-FWBAS, RTAX1U12-HWSTE and RTAX1U12-HWBAS of Tax section in MIRO transaction. In table settings, administrator option of that section I can change them, but when I save the variant the system do not save the settings. There is another transaction where these field status are maintained? I think that in another part these fields have the status "Invisible".
Best regards,
Alfredo Del Portillo

Hola Alfredo,
The table control for taxes in MIRO cannot be changed by the administrator function like other table controls.
Which columns are displayed or not is decided by the program dependend on several parameters.
The tax base amount is changeable or not is controlled by a setting in FI customizing:
IMG -> Financial Accounting -> F.A. Global Settings -> Tax on Sales/Pur
-> Basic Settings -> Change field control for Tax base amount
I hope the above information answers your inquiry.
Xalu2
Mauro

How can I get and change the values of Withholding tax grid in MIRO trx

Hi everyone,
I have a requirement where I need to get and change WT_WITHCD field in MIRO's Withholding tax grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi doesn't have this value.
Do you have any idea?
Thanks in advance!
Regards.
Leo.

Hello Leonardo,
You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
LOOP AT ti_drseg INTO ls_drseg.
lv_index = sy-tabix.
LS_DRSEG-MWSKZ = 'I0' . " < For example
MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
ENDLOOP.
FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
<drseg> = ti_drseg[]. " this will modify the data in MIRO with your modified data
Regards,
Naimesh Patel

Two tax codes in MIRO

Dear All,
We are having a scenario in which we make freight payment to vendor for import purchase. But while making freight payment we have 3 different components say A, B, C, out of the three the vendor charges service tax on two A and B, but not on C.
While making invoice in MIRO i have given V0 tax code at header and for condition C at item level. And accordingly maintained tax code S1 at line item level for A and B. But still the system does not calculate tax for the line item A and B, gives error as tax code S1 does not exist in TAXINN.
Have maintained all the necessary tax conditions in FV11.
Request to kindly do let us know is there any other way we can execute the following scenario or where have we left out.
regards,
mahesh.

hi
try using single tax code S1
if still error is comming then check following
u have given proper condition in FV11
now check ur tax code
in which for that condition check the transaction key and for this transaction key check the gl acct in OB40
or in ftxp select the transaction key and click on g/l acct u should get the gl acct for that key here
if it is not there assign it in OB40
u will find many threads for this "tax code doesnot exist in taxinn"
hope it help
regards
kunal

Excess tax occuring in miro

Similar Messages

Maybe you are looking for