Excessive disk usage when I drag the log file viewer window (why)?
When I drag the Log File Viewer window in Gnome, I get huge amounts of hard disk usage and the hard drive makes a loud rumbling noise. This happens only while dragging the Log File Viewer window and no other windows (that I've noticed so far).
Why is this happening?
Last edited by trusktr (2012-01-11 05:27:54)
Elements11DRC
What version of Premiere Elements are you working with and on what computer operating system is it running?
Can we assume by your selected ID, that the program is Premiere Elements 11?
Pending further details, I will assume that you are working with Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit.
Where is this "My Videos" Folder - on a DVD disc being used as a DataDisc for video storage purposes?
If so, Add Media/DVD Camera or Computer Drive/Video Importer and from there automatically into the project in Project Assets as well as on the Timeline.
If your "My Videos" Folder is a folder on the computer hard drive, then Add Media/Files and Folders to get the video into Project Assets from where you drag the video to the Timeline.
Now for the video that you are trying to import...what are its properties
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
Probably answered the easiest by knowing the brand/model/settings of the camera that recorded the video.
Prime interest, that video compression. It could be MotionJPEG which can be problematic for Premiere Elements. It could be AVCHD.avi which cannot be imported.
We can go into greater detail on your project details once we rule in or out any of the factors mentioned above.
By the way, what is the destination for this project....burn to disc DVD or Blu-ray...export to file saved to the computer hard drive...other?
More later.
Thanks.
ATR
Similar Messages
-
when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?
Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha -
RAISEERROR not shown in Agent Job Log File Viewer
I use a RAISEERROR for a critical error in a CATCH. When the Job is run, it does fail but it gives the following message. How do i get my @Note to show in the Log File Viewer? Also, where is the log referenced 'WITH LOG'. I looked at the SQL Server Agent
Log and did not see anything.
Message
Executed as user: NT AUTHORITY\SYSTEM. TCP Provider: The specified network name is no longer available. [SQLSTATE 08S01] (Error 64) Communication link failure [SQLSTATE 08S01] (Error 64). The step failed.
DECLARE @Note VARCHAR(500) = 'RAISEERROR due to Critical error'
RAISERROR (@Note, 20, 127) WITH LOGIt says Target Local Server. I scripted out the job and proc and ran them on another SQL Server 2008 R2 and I got the expected results. Maybe the test SQL Server 2008 R2 environment I am using has some quirks (for lack of a more technical term)
@VERSION on SQL Server where I get the [SQLSTATE 08S01] (Error 64)
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
@VERSION on SQL Server where I get expected results
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Developer Edition on Windows NT 6.0 <X86> (Build 6002: Service Pack 2) (Hypervisor)
BELOW are the scripted out job and proc that I have been using to test the RAISERROR
-- scripted out job
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
IF EXISTS (SELECT job_id FROM msdb.dbo.sysjobs_view WHERE name = N'AATEST')
EXEC msdb.dbo.sp_delete_job @job_id=N'2dd36995-fde6-491c-b4e2-85e8bdea6411', @delete_unused_schedule=1
GO
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
BEGIN TRANSACTION
DECLARE @ReturnCode INT
SELECT @ReturnCode = 0
/****** Object: JobCategory [[Uncategorized (Local)]]] Script Date: 12/15/2013 16:15:09 ******/
IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N'[Uncategorized (Local)]' AND category_class=1)
BEGIN
EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'JOB', @type=N'LOCAL', @name=N'[Uncategorized (Local)]'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
END
DECLARE @jobId BINARY(16)
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'AATEST',
@enabled=1,
@notify_level_eventlog=0,
@notify_level_email=0,
@notify_level_netsend=0,
@notify_level_page=0,
@delete_level=0,
@description=N'No description available.',
@category_name=N'[Uncategorized (Local)]',
@owner_login_name=N'FNXXX\eME', @job_id = @jobId OUTPUT
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
/****** Object: Step [STEP1] Script Date: 12/15/2013 16:15:09 ******/
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'STEP1',
@step_id=1,
@cmdexec_success_code=0,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0, @subsystem=N'TSQL',
@command=N'EXEC aap1test',
@database_name=N'Store01',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
GO
-- scripted out proc
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aap1test]') AND type in (N'P', N'PC'))
DROP PROCEDURE [dbo].[aap1test]
GO
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[aap1test]
AS
BEGIN
RAISERROR ('************ i am here', 20, 127) WITH LOG -- bxg
END
GO -
i have some stuff i want to put on external hard drive when i drag the file or files it just puts them back
Did you format the external disk on Windows? If you did this, probably the external disk is formatted in NTFS. OS X can't write on this format, so it's normal that it doesn't allow you to copy the files.
In this case, you have three possibilities:
1. Install Paragon NTFS. This program allows you to write on NTFS partitions.
2. Copy the hard drive content to your internal disk and format the external disk with Mac OS Extended (Journaled). Do it only if you are going to use the external disk only with OS X.
3. The same as the last one but formatting it with exFAT. This filesystem is compatible with Windows (XP, Vista, 7, 8) and OS X (10.6.5 and newer), so you can write and read files on external disks formatted with it on Windows and OS X, but you may have problems on Linux -
where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one? At the moment when I try to do it, the window that appear doesn't allow me to continue. it only says "the volume has the wrong case sensitivity". thanks
Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume. -
For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one. Help?
Hi
I would trash - iMovie pref file - and re-try - sounds like this got faulty.
• Delete iMovie pref. file. iMovie pref. file resides.
Mac Hard Disk (start-up HD) / Users / "Your account" / Library / Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter:
chflags nohidden ~/Library (exactly like this - space included)
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
Yours Bengt W -
I just downloaded osx lion and when i click the lion icon nothing happens why cant i log in?
I just downloaded Mac osx lion and at the login in page when I click the lion nothing happens why can't I log in?
Sounds like a Windows installer. Does it say Mac on the disk? When you open the dmg, does it say Office:Mac?
-
Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?
Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited -
How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.
That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry -
Can we reduce the size of the disk having the Log files for a Dag Database
There is an issue with disk space filling up for 4 databases part of the same DAG, each having 1 non lagged passive copy.
The Disks containing the log files are from the VSphere Storage. The Disk size was temporarily expanded to avoid any outages.
There is a full backup running currently, which is expected to clear the transaction logs on completion and that should be reducing the disk space utilized.
The storage guys want to know whether they can reclaim the temporarily expanded disk size. i.e reduce the disk space from the storage containing Log Files without affecting anything.
I couldn't find any documentation on this specific requirement, and want to confirmThere is an issue with disk space filling up for 4 databases part of the same DAG, each having 1 non lagged passive copy.
The Disks containing the log files are from the VSphere Storage. The Disk size was temporarily expanded to avoid any outages.
There is a full backup running currently, which is expected to clear the transaction logs on completion and that should be reducing the disk space utilized.
The storage guys want to know whether they can reclaim the temporarily expanded disk size. i.e reduce the disk space from the storage containing Log Files without affecting anything.
I couldn't find any documentation on this specific requirement, and want to confirm
I dont see why not. Once the logs are cleared, Exchange doesnt care.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?
Only Microsoft can manage to design something as stupid as this. If you start wusa from the command line, it pops up the alternative command line switches. For log, it just says: " /log - installer will enable logging". It doesn't say that you
should specify the log file name, hence not HOW you specify it (" /log:<path\filename>.") It doesn't say what extension to use for the file, alas which file type it is (" /log:<path\filename.evtx>."). You open it in notepad, you cannot read it.
You open it in sccm's cmtrace.exe/trace32.exe, you get nothing. IT IS NOT POSSIBLE TO IMPLEMENT THIS IN A WORSE WAY. How can something be so bad? How can Microsoft get such stupidity inhouse, when you need to go through six interviews or something to get in??
I cannot believe it - unfortunely, this is seen again and again. -
I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and how can I fix this problem?
Make sure that both the web browser you're using and its Flash plug-in are up to date. Google Chrome has its own Flash plug-in it updates on its own. Firefox, IE and other have separate plug-ins.
Maybe you are looking for
-
ITunes with Vista and fingerprint reader
Hi I have a new iPhone and a PC running Windows Vista. Just after the installation of iTunes 8.0.2 when I try to login for authorization, iTunes freezes and the only way to close is Ctrl-Alt-Canc. Furthermore (yes, it's another question..) it is impo
-
Major PB Problem out of the blue
I am going nuts. I have the 1.25GHz 15" Al PowerBook. The first of the Al line. It has worked like a dream... until today. No new software installs. Same updates running on my desktop (no problems). Today, I got no less that 18 kernal panics. Yes, 18
-
Hi Gurus, I have some basic question , 1.L-Next Empty Bin:- As we already defines the search strategy for the storage type & structure of the bin with its way of deciding the bin. Why it is require to define it as a separate strategy(Assiged to
-
2014 Retina Thunderbolt Not Recognizing Drives/Devices
Hi, I purchased a new retina Macbook Pro about two weeks ago and notice that the thunderbolt ports don't seem to be recognizing two different drives. The ports work with displays but when connecting an OWC powered drive and a lacie bus powered drive
-
Queries about Oracle User Groups
Hi, I am planning to move to US in few months. I would like to join in any Oracle user group and attend sessions from industry experts. I would like to get some advices on 1) Should i join in IOUG (Independent Oracle Users Group) or 2) Should i prefe