Exch2k13 - Monitor Maintenance mode - there is a way like older versions?
Hi,
I found only articles saying to set the Logging to minimum and check some event viewers - but all for older versions.
>>> There is some way to accompany these tasks performed on Exch2013??
Useful article:
http://windowsitpro.com/systems-management/10-tips-keep-your-microsoft-exchange-server-humming
Hi,
If you want to monitor Exchange server health, in Exchange 2013, Managed Availability can provide built-in monitoring and recovery actions.
Here is a related article for your reference.
http://technet.microsoft.com/en-us/library/dn482056(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
Is there a way to restrict handles when snapping like older versions of illustrator?
In previous versions of illustrator, when you snapped to grid the handles would snap as well. This made making complicated precise line work easier and faster. I noticed in the October update that the removal of this function is being touted as an upgrade/feature??
"When snapping is turned on, your anchor points and handles (direction lines) align to your choice of pixel, grid, or point. However, handles snapping to the grid restricts the freedom with which you draw. In the 2014 release of Illustrator CC, whatever you choose to snap to, handles are completely unrestricted. When handles are not subject to being snapped to a grid, you have much finer control over drawing and editing workflows."
...that handle restriction was actually very, very useful to me. Any way to get that back/toggle it on and off? Without having to downgrade to older versions of illustrator?
Thanks for any help you can provide!The answer is not yet. Most people are hoping that the engineers will introduce a toggle to return the old behavior as an option but don't hold your breath. If you absolutely need it you will have to revert to an earlier version.
-
I like playing a game called Fallen Sword. I use a Grease Monkey script to help with short cuts and so forth since updating my firefox that script is no longer doing the same things and i want to be able to use it again. Hence it is possible to revert to an older version so that this script works?
You might want to consider extending the lifespan of your G5 by using a different operating system. I put [https://en.wikipedia.org/wiki/Lubuntu Lubuntu] on a G5 recently and it runs the newest Firefox just fine. Lubuntu (pronounced Loo-boon-two) is sort of an Ubuntu lite - a user-friendly version of Linux. There are many applications to choose from, and it's all free.
The PowerPC I did this on was one of the old Bondi Blue ones. Firefox had no problem running on it at all and has all plug-ins needed for video, audio, etc.. I gave it to a church and it's running fine for them.
You can download old versions of Firefox, but you'll just open yourself up to security problems if you do.
FYI: The Mac operating system is built on Linux. -
version of firefox 9.0.1
OS is Mac OS X 10.5Firefox 2 was released in Oct '''2006''', over 5 years ago. It isn't supported by Mozilla any longer and isn't safe to use, as it is missing over 3 years of security updates that newer version of Firefox have.
My advice is to contact Target and ask them to provide a plugin for current versions of Firefox - not one for a 5 year old browser. -
I seem to recall, in older versions of FF, I could allow cookies, block cookies or have FF ask me if I wanted to allow a cookie each time a site tried to place one. This meant that I could allow certain cookies from, let's say Yahoo!, while disallowing other cookies from Yahoo!. I found this to be a very useful feature, and I would like to have it back.
See:
*Tools > Options > Privacy > Cookies: "Keep until": "ask me every time"
Be aware that you may need to confirm each cookie if a website wants to store more.
*CookieSafe: https://addons.mozilla.org/en-US/firefox/addon/cookiesafe/
*Extended Cookie Manager: https://addons.mozilla.org/firefox/addon/extended-cookie-manager/ -
I wanted toknw if i can get ios 6 back on my phone...The update is horrible..Its reallyslow now and sometimes freezes where i cant do anything
Downgrading is not supported at all.
-
Dynamic Group containing maintenance mode devices
Hi,
I am using a scheduled script to put a large number of items in maintenance mode for periods of time where we do not which to receive alerts or cause DA state changes. For these objects, the time is overnight or weekends.
The script adds all objects in a dynamic group into maintenance mode. This includes both windows and network devices.
My issue is that when an engineer manually puts an item into maintenance mode for genuine maintenance purposes, it may be overridden.
So my idea is to have another dynamic group containing all objects in maintenance mode, and make it an exclusion in the original group. Is this possible or is there a better way?
FYI The script I am using for the bulk maintenance mode is based from here:
http://www.systemcentercentral.com/opsmgr-2012-group-maintenance-mode-via-powershell-the-way-it-should-be/Hi,
We can use below command to get all members in a group:
$Groups = Get-MonitoringObjectGroup
$Group = $Groups | where {$_.DisplayName -eq "Group Name"}
$Members = $Group.GetRelatedMonitoringObjects()
And with below command we could get all members that in maintenance mode:
$Members | where{$_.inmaintenancemode -eq $true}
With set-SCOMMaintenanceMode command we can update active maintenance mode entries.
http://technet.microsoft.com/en-us/library/hh920197(v=sc.20).aspx
Regards, Yan Li -
I want to put a scom gruop into Maintenance. The Management Server is not member of it.
When I use the following Powershell Script with SCOM 2012....
Import-Module OperationsManager
$Instance = Get-SCOMGroup -displayname "<Group>"
$Time = ((Get-Date).AddMinutes(90))
Start-SCOMMaintenanceMode -Instance $Instance -EndTime $Time -Comment "Automatic WSUS Updates" -Reason "PlannedOperatingSystemReconfiguration"
....the Maintenance mode never ends. I have to stop the mode manually. When I use the SCOM Console everything is fine.In my environment, it works but may be in some delay. Moreover, you can use get-scommaintenancemode to watch whether the maintenace mode and schedule end time is correct.
You may be refer to Pete Zerge blog "r OpsMgr 2012: Group Maintenance Mode via PowerShell"
http://www.systemcentercentral.com/opsmgr-2012-group-maintenance-mode-via-powershell-the-way-it-should-be/
Roger -
Is there any way to get an older version of the iTunes Library .xml backup file?
I turned my computer on today and my entire library was gone! (Files, thankfully, still available) I tried to restore from the .xml file, but the file was already updated with the new/empty iTunes before I could restore my original one. Is there anyway to get an older version of that .xml file back? PLEASE HELP!
Not from the store no, only the current version is available there - the only way is if you yourself have a previous version of it on, for example, a backup
-
Is there a PS sript to put different web applications in maintenance mode
HI,
I have 2007 R2 SCOM environment.Multiple Web applications is monitored. I got request to put together PS script which could put web application to maintenance mode so it wouldn't not alert while somebody working on it and puts it down. Is there possible
way to do that.
Thanks
BalysHi
There are different ways to interpret "web applications" - if this is basic URL monitoring then this can be done as follows:
http://www.scom2k7.com/schedule-a-into-url-maintenance-mode/
http://www.scom2k7.com/schedule-a-group-of-urls-into-maintenance-mode/
I have done similar for process monitors here:
https://systemcentersolutions.wordpress.com/2010/04/03/scheduled-maintenance-process-monitors/
The idea behind all of these is that you'll need to find out the target class and then put that class into maintenance mode.
Regards
Graham -
OM2012 – Putting a Monitor in maintenance mode
Hi there,
I need to write a powershell script to put a Monitor in Maintenance mode. This is easily doable manually on the console whenever an alert comes up by putting the alert in Maintenance Mode.
So far I managed to make my script to put the class of the Monitor into maintenance, as per bellow
i.e. if the monitor is “Total CPU Utilization Percentage”, it would put Microsoft Windows Server 2012 R2 Datacenter in maintenance mode for the computer $ComputerName.
$ComputerName = Read-Host “Enter computer name”
$MonitorName = “Total CPU Utilization Percentage”
$Monitors=Get-SCOMMonitor -ComputerName $strComputerName | where {$_.DisplayName -eq $MonitorName}
$Time = ((Get-Date).AddMinutes(6))
foreach ($Monitor in $Monitors) {
$Instance = Get-SCOMclass -name $Monitor.target.identifier.path | Get-SCOMClassInstance #| where {$_.Path -eq $ComputerName}
Start-SCOMMaintenanceMode -Instance $Instance -EndTime $Time -Comment: “Server maintenance”
I can’t figure our how to simply put “Total CPU Utilization Percentage” (or any other Monitor) in maintenance mode
Thanks for your help !Yes, use the "Start Maintenance Mode" Activtiy of the Integration Pack for OpsMgr.
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Hello, I am using my Macbook Pro, late 2012 with a second monitor, which is a TV. I am wondering if there is a way to prevent spaces from poping up in the second monitor when i want it to ocur in the primary monitor? So on one monitor, or whichever one the mouse is, I want say Spaces, or Launch pad to popup on and not interfer with the other screen. Is there a way to do this?
Thanks,
Harrison HowardI believe the answer is no.
I have not been able to make extra monitors stick with a particular space.
Also, there is a relevant discussion here regarding this matter.
The last poster suggests a workaround which does not work as far as I can tell.
Here is the discussion thread
Best of luck -
Hello everyone, I bought a macbook retina 15 "display.'ve Connected 2 full hd 1920x1080 monitor as extended desktop, if I cast two movies I can see them on the second monitor, but if I wanted to launch 3840x1080 1 movie how do I watch on two monitors side by side ? same thing if I wanted to work on both monitors as if it were a single monitor with a resolution of 3840x1080. I hope for your reply, sorry for my English, I used a translator. Thanks
If you have used the Displays system preference to arrange the monitors next to each other, you should be able to stretch a movie player window across both monitors.
I do not think there is a way to show the movie full screen across both monitors, because full screen usually takes over just one monitor. -
Is there an easy way to switch mini dvi between monitor and tv?
I would like to be able to connect my mini's dvi output to a either a monitor or my tv. I am not trying to get a display on both simultaneously. With a DVI to DVI cable between mini and monitor and a dvi to hdmi cable between mini and tv I think that I can swap dvi connections at the mini, but that looks like a pain. Is there an easier way to do this?
I am about to order the dvi to hdmi cable. Is the mac mini's dvi port hot plugable or do I need to put the mini to sleep or shut down? Thanks,
OwenWelcome to Apple Discussions!
Without some extra hardware, you can't. The mini, like all Macs, looks for data from the display to determine what settings it makes available to the user, so with two displays connected and feeding their available configurations, the mini will get very confused! Even if the two displays have one or more common settings that will actually work, each time the mini boots or wakes and detects the display, one or other (or both) are likely to go blank.
There are adaptors you might consider, such as those from Gefen, but they are not inexpensive. Have a look at http://www.gefen.com/kvm/dproductlisting.jsp?listingCategory=Switchers&productTy pe=dvi for a list of available switching options, though beware that for the most part, the need being met is for TWO sources and ONE display, not your ONE source and TWO displays. -
my phone is on recovery mode and the only way out is to restore it but i dont wanna loose any of my memory on there what can i do?
ceci09 wrote:
my phone is on recovery mode and the only way out is to restore it
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Mail Not Working After 10.9.4 Update
Is anyone else having mail issues after the 10.9.4 update this week? Neither my iCloud or Cox email account is able to send or receive email after this update. The small exclamation mark appears to the right of each account, both for incoming and se
-
Ipod is on the desktop but not in iTunes
I connect my ipod to my computer and it shows up on the desktop, but I can't download music I've bought from iTunes to my ipod. What do I do?
-
Action to SET environment variable (permanently) e.g. change path
I would like to be able to set an environment variable as an action in bundles -- not to set one associated with an executable action, but rather to define an action that will accomplish permanently setting an environment variable. For example (not q
-
Relevance of Time series data in PPDS
Hi, we have an SNP planning area with some times series KFs in it. if we delete the time series for the PA what impact it would have on PPDS.. or what would be the relevance of times series data in PPDS?.. kindly explain.
-
Startup = blinking file folder icon?
After waking my Intel iMac from sleep mode I selected "Mail" too quickly and got the spinning beach ball for a while. I put the iMac back to sleep, woke it, same problem. I turned it off using the off button on the back of the iMac, because I was un