Exchange 2003 and snow leopard

This is a short post to thank Denis Tolo
for pointing out how to get Exchange 2003 servers to work with
ical address book and mail : DavMail.
This was a real lifesaver ! A bit tricky to setup but hey it gets the job done.
The company I work for does not want t support mac ppl, and does not intend to upgrade exchange just yet
so untill now I could only check my work mail via webmail .......
On a side note for the man upstairs, It does sound funny that on the iphone you practically
set-up all of this in 30 sec max whilst to get it done on the mac it took me 2 years + DavMail.
P.S. it needs to be done on Lion too

From my MBP with 10.6.2 I can connect using OWA both to a hosted service running Exchange 2007 and an internal service running Exchange 2003.
It sounds as if there is a problem with the network configuration. Is there any firewall between your client system and your company server? Are you using the same IP information (DNS, GW, etc) on the client as on the other systems which work for you?

Similar Messages

Exchange 2007 and Snow Leopard Setup...HELP

I know this topic may have been covered in here previously but I have yet to find a solution.
Here is the background. Our CEO has a Mac Book and two weekends ago he updated to Snow Leopard and now wants to use the Mail client on his Mac rather than OWA to get his email. We have Exchange 2007 (I am the Admin) and have all the latest patches and Roll Ups installed. We run OWA without issue and have 10 iPhones working perfectly (i realized they use different technology to sync). I enabled EWS by following this link http://technet.microsoft.com/en-us/library/bb201695.aspx and this is the actual command i used:
Set-WebServicesVirtualDirectory -identity exchaname\EWS* -externalurl https://webmail.domain.com/EWS/Exchange.asmx -BasicAuthentication:$True
Seems to have run properly and there are no errors reported.
Now when I go to connect using the Mac it does not Auto Discover and I must enter manually. I enter what i think it needed and its not working. On the Account Information Tab I have the following:
Description: generic name
Email Address: [email protected]
Full Name: The Person's Name
Internal Server: webmail.domain.com *Not sure what should be here
External Server: Webmail.domain.com *Again not sure if this is correct
Username: AD user name Also tried domain\username
Password: AD password
Ougoing Mail Server: not sure what should be here
Next is the Mailbox behavior Tab:
Did not change anything
Advanced Tab:
Internal Server Path: EWS/Exchange.asmx
Port:80 SSL unchecked
External Server: EWS/Exchange.asmx
Port: 80 SSL unchecked
I get no connections and I am sure somehting is not correct in the above but I am lost and new to Exchange as it is. Also new to Mac's
Help Please

Looking for post.

Exchange 2003 with snow leopard mail

hi guys,
Not sure if anyone can help but any help is much appreciated. i have entourage setup to work exchange server and works fine through the internal network and external. when i setup mac mail it only seem to be able to connect when im inside the company network. Soon as im outside the network it can not connect to the server... any ideas ??
thanks
sesh

Mail supports Exchange 2007 SP1r4 (or later), yours is 4 years earlier than that so I have no suggestions.
Message was edited by: Csound1

Exchange 2003 and Mac Mail (leopard) Mac Os 10.5.8

I am a new mac user....my school uses Microsoft Exchange 2003 and I can access my school account from the web using Outlook Web Access 2003. I am trying to consolidate and get my school account to my mail on my macbook....I know all of my server info as I get my email on my phone, but I am not getting anything to work on my macbook..... any ideas?

I have exchange 2003 at school(and outlook web access from internet) and I am trying to get it to show up directly into the mail part of my mac book.... I am not a techie, obviously, but when I try to add the account, I had been using Exchange instead of IMAP and POP.... The exchange process didn't work so then I actually did try IMAP and POP, but maybe the incoming outgoing server should be different than what I am putting in.... I can receive outlook (school email, contacts, etc) on my samsung blackjack so I thought there wouldn't be much to it, but obviously I am doing something wrong and I should just talk to my school

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Removing dead Exchange 2003 and Exchange 2000 Server from the domain

Hi Team,
I have come across a client who wants to migrate to O365 from existing Exchange 2003 environment through the Hybrid Model. I am trying to introduce 2010 Sp3 to the environment. While checking the environment using Exchange pre-deployment found 2 servers
in the environment which is not present on the network now. Client has no clue what they are.
One is Exchange 2003 and the other is Exchange 2000. The problem here is i cannot introduce Exchange 2010 Sp3 unless all the Exchange servers are running minimum Exchange 2003 Sp2.
At present i find only 2 exchange 2003 Sp2 server which are in production. Need kind assistance to move forward.

Hi,
I recommend you follow the steps below:
1. Please upgrade Exchange 2000 and Exchange 2003 to Exchange 2003 SP2 at first.
2. Deploy Exchange 2010 servers in this order: CAS, Hub, UM and Mailbox. For more information, here is an article for your reference:
Exchange 2003 - Planning Roadmap for Upgrade and Coexistence
http://technet.microsoft.com/en-us/library/aa998186(v=exchg.141).aspx
3. Install Exchange 2010 SP3.
Here is an article for your reference.
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
About a hybrid deployment with Microsoft Office 365 using Microsoft Exchange Server 2010 servers, here is an article for your reference.
Understanding Upgrading Office 365 Tenants for Exchange 2010-based Hybrid Deployments
http://technet.microsoft.com/en-us/library/jj945383(v=exchg.141).aspx
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Aperture 2 and 3 and Snow Leopard

My system with Aperture 2 was perfect.
Then I believe that Snow Leopard killed Aperture 2.
When I first installed Snow Leopard my machine felt like new again but slowly and slowly over the last few months the whole system seems to feel less and less snappy.
I don't use many video-intensive applications - my main one is Aperture 2, so this is where I find my main cause for concern.
Painfully slow adjustments with lagging, beach-balling, CPU-hogging, and RAM theft.
The main culprits seem to be Highlights/Shadows, Straighten, Crop, and Retouching… although my open mind says that could simply be because they form the latter part of my tweaking process.
There seems to be a thumbnail generation issue. Every adjustment that is made generates a new thumbnail - as you work through your tweaks that process seems to get backed up and slow everything down.
There seems to also be a video issue. Tweaking horizontal photos in full screen causes twice as much lag as a vertical image. Why? Take a look - it's obvious - in full screen edit a vertical image is about half the size of a horizontal one.
There seems to be a memory issue. Aperture seems to use a large amount of processor and RAM and sometimes doesn't let go of it or it gets caught in some kind of a loop. I've no idea what I'm talking about here. All I know is when I look at Activity Monitor the numbers are going through the roof and I can barely concentrate on them because of the noise from my fans.
There have been various and quite diverse suggestions on this and other forums as to what the underlying problem is and I have done my best to look into those and see what can help.
I have an early-2008 MBP 4,1 - 2.6 Intel Core 2 Duo - 4GB (factory-fitted) RAM - GeForce 8600M (512MB) GT.
I have done everything possible: all software totally up-to-date, re-installed combo updates, rebuilt Aperture libraries, run consistency checks, fresh Aperture install, fresh Snow Leopard install, repaired permissions, booted in 32bit, booted in 64bit, run hardware tests, deleted plists, cleared caches, downloaded and run applications like Onyx and Snow Leopard Cache Cleaner (amongst others) to ensure everything is in ship-shape along with various test applications to gauge if components like my hard drive are dying.
I keep my system clean and tidy. I have now stripped out bloat. I even took out iPhoto in case its 'iLife' browser link to Aperture was an issue. I have 85GB free on a 200GB. All components are original as factory-fitted by Apple.
Everything that any seemingly intelligent person on any decent forum has suggested has been done - in particular I thank the many users here on the Apple forum for all their information sharing… I try to read them all.
From what I see on the forums, I am not alone.
Nothing has fixed this problem.
I (and no doubt many others) have fed this information back to Apple.
Aperture 2 and/or Snow Leopard has a problem that has not been fixed.
Aperture 3 got released and I trialled it and swiftly uninstalled it because the exact same problems are there - even with one single photo in it.
My concern is that Apple will not fix the cause of the problem which seems to lie outside of Aperture.
If Apple concentrate on making Aperture 3 work better inside a possibly shaky Snow Leopard then I will be very disappointed.
I'm not forking out for a new version of software just because Apple broke my current software. Don't get me wrong - I do actually WANT to buy Aperture 3 because it has functional improvements and advancements that I would love to be using providing it works properly - and for me (and it appears for 'quite a few' others as well) it just simply doesn't… and neither does Aperture 2 any more.
I am no technical expert (as you've probably noted already) but a MAJOR bug seems to lie in the relationship between Snow Leopard, graphics cards, and the way it handles memory - and so in turn graphically-intensive applications like Aperture are high-lighting these problems more than others.
I am sure there are people without these problems. Perhaps these problems relate to specific hardware configurations. My configuration is Apple standard. I really shouldn't have these problems.
Until Apple fix this major bug I cannot remotely consider Aperture 3.
Until Apple fix this major bug I could never buy Apple again.
Up until Snow Leopard you had a VERY happy camper. I had a perfect machine and I was shouting Mac from the rooftops to anyone that would listen.
And then it seems Snow Leopard broke my machine.
What a shame.
I really want to use Apple, I actually really like Snow Leopard, I really want to use Aperture, I really want to carry on telling people how wonderful the Apple Mac experience is (or was...) but Apple are currently making it very difficult for me to continue doing so.
Please fix Snow Leopard.
This will hopefully fix Aperture 2 and Aperture 3.
Unless anyone else has a fix?
Sincere apologies to all for banging on for so long !!

Thanks for your input setwart.
When I make adjustments I do want Aperture to provide me with a new version so that I can see the original image and also that I have a version which I have already adjusted. I've previously tried changing that preference before with no improvement in performance unfortunately, but it's not really what I was referring to.
Versions, thumbnails and previews were very confusing terms to me for a while… actually, in some ways, they still are but my understanding is 'a little' better now.
That said, I probably used the wrong term.
What I meant was that every time you make an adjustment Aperture seems to produce a 'record' or 'snap-shot' of your image including that latest adjustment. In so doing you have an entire history of each adjustment you have made. In my head I picture this like a movie film-strip with each frame differing slightly. You increase your saturation by a single point? Another snap-shot. Fancy another single point on your saturation? Another snap-shot… and so on.
It is typical that I will make a bare minimum of 20 adjustments on each image, and that's before even thinking about straightening, cropping, and retouching… and then maybe I'll go back and tweak everything again !!
Somehow, my system is having difficulty in keeping up to speed with all of those snap-shots of individual adjustments. Certain adjustments will drastically slow things down more than others, and then I get to play with the beach-balls.
But - it used to handle these things just fine and that's what I'm trying to get back to.
Thanks again for getting involved.

Dual boot drive - Mountain Lion and Snow Leopard - Correct order to load software /apps?

Hi
I want to create a dual boot drive for Mountain Lion and Snow Leopard as some of my hardware (is not supported in Mountain Lion).
I am happy how to do this, I just want to know if there is a correct way to install software and apps.
My plan was to do a clean install of both using two partitions, the larger going to ML and smaller one for SL. I was going to install SL from the DVD and then after updating from 10.6. to 10.6.8 and download ML from the app store and install on the larger partition.
Do I install all the software I use like Final Cut, Aperture, iLife (for Garageband) etc on the ML or SL partition or on both. Also, is there a better way / practise of the order software updates / apps and boxed software should be installed when doing a clean machine install.
Thanks in advance.
Matt

Thanks mende1
So, if I have software I need to use on both ML and SL - for example Final Cut as I have a Canopus AVDC box which is not supported in ML but only SL, do I need to install the same software in both OS?
I usually open apps using spotlight and didn't know if it would software / apps would open if already installed on the other partition?
Thanks again
Matt

Best practice for iCloud across Lion and Snow Leopard

Hi all,
I'm not going to bleat about SL not supporting iCloud. I understand the business model.
However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook. This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more. (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
Cheers,
Danno

Danno. wrote:
Hi all,
I'm not going to bleat about SL not supporting iCloud. I understand the business model.
However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook. This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more. (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
Cheers,
Danno
There are some hacks to using iCloud with Snow Leopard. One of the keys is you must use iCloud as your primary source for Contacts and Calendars. That is, when you want to make additions or changes to either your calendar or contacts you really MUST do it from the web interface to iCloud. Otherwise you may wind up with duplicates.
See the article here: http://bit.ly/LvVCR2

Exchange 2003 and snow leopard

Similar Messages

Maybe you are looking for