Exchange 2003 service packs and Unity 4.04
My client wants to move to Exchange 2003 SP2 and his current Unity version is 4.04 Sr1. Are there any incompatibility between the two ?
Thanks
From what I hear SP2 is TAC supported only with 4.0.5 and above. So, upgrade them and enjoy the billing part.
Regards,
Dragi
Similar Messages
-
Compatibility between Exchange 2007 service packs
Hi all, I have 5 servers Exchange:
- 3 Servers CAS and HUB
- 2 Servers Mailbox server in Microsoft Failover Cluster (MSCS)
Domain Controllers are all
Windows Server 2003 SP2
The versions of Exchange 2007 SP1 servers are all:
8.1 Build 240.6
I have thought about installing SP3 and RU13 in all 5 servers for Exchange, but I'm going to install SP3 and RU13 on 2 servers CAS / HUB and the following week at the other CAS / HUB server.
Finally, the following week in the two Mailbox Servers.
Is there any problem if I miss 2 servers CAS / HUB with SP3 RU13 and the other CAS / HUB in SP1, this will only be for a few days?
Is there any problem if I leave the servidors Mailbox Servers in SP1 while CAS / HUB are in SP3 RU13, this will only be for a few days?
regards
Microsoft Certified IT Professional Server AdministratorHi Yupikaiey.
Only thing you should be concerned is if you have CAS-CAS proxy or the Mailbox Cluster part.
Your current plan looks good. Just stay alert for any uncommon issues popping up, which would normally mean due to the difference.
If you upgrade your servers in this order, you may avoid potential service interruptions.
Details below:
Version Constrains are more of between roles of 2007-2010-2013 and not between same version SPs or RUs.
Exchange 2013 Server Role Architecture
The Past: Exchange 2007 and Exchange 2010
Our goal was to make these server roles autonomous units. Unfortunately, that goal did not materialize in either Exchange 2007 or Exchange 2010. The server roles were tightly coupled along four key dimensions:
2.This also necessitated a tight versioning alignment – a down-level Hub Transport or Client Access shouldn’t communicate with a higher version Mailbox server; in some cases this was enforced (e.g., Exchange 2007 Hub Transport servers cannot deliver messages
to Exchange 2010 Mailbox servers), but in other cases they were not (e.g., an Exchange 2010 SP1 Client Access server can render data from an Exchange 2010 SP2 Mailbox server).
The versioning restriction also meant that you could not simply upgrade a single server role to take advantage of new functionality – you had to upgrade all of them.
The Present: Exchange Server 2013
If I upgrade the Mailbox server with a service pack or cumulative update, then for a given mailbox hosted on that server, all data rendering and content conversions for that mailbox will be local, thus removing version constraints and functionality issues
that arose in previous releases.
Exchange 2007 Servicing
http://technet.microsoft.com/en-in/library/dd421853(v=exchg.80).aspx
Deployment Order
Our test infrastructure guarantees that Exchange hotfixes work across multiple server roles. The order in which you apply the update rollup to the servers is not important except if you are deploying CAS-CAS proxying. Because the update rollups are not segmented
for different Exchange server roles or for specific file configurations, apply each update rollup package to all Exchange 2007 servers in your environment.
If you have multiple Active Directory sites, and if you deploy a Client Access server in the proxy sites that do not face the Internet, you must
apply the update rollup to the Internet-facing Client Access servers
and to the non-Internet-facing Client Access servers in the proxy site simultaneously. For other Exchange 2007 configurations, we recommend that you
apply the update rollup package to the Client Access servers before
you apply it to servers that are running other Exchange 2007 server roles, such as the Mailbox server role, the Hub Transport server role, and the Edge Transport server role.
Note:
Applying service packs and update rollups to clustered Mailbox servers requires specific planning and application steps. For more information about how to apply service packs to Exchange 2007 clustered Mailbox servers, see
Upgrading Clustered Mailbox Servers to Exchange 2007 SP1 or later. For more information about how to apply update rollups to Exchange 2007 clustered Mailbox servers, see
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers.
For Patching and compatibility between versions:
Determine the service pack level of Exchange.
Update rollups are service pack dependent. For example, an Update Rollup 5 package is available for Exchange 2007 and for Exchange 2007 Service Pack 1. To determine the service pack level of Exchange, examine the
ExchangeVersion property. For more information about how to view the
ExchangeVersion property and about the build number that is associated with each Exchange version, see
Exchange Server 2007: Platforms, Editions, and Versions.
References:
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
Exchange Server Updates: build numbers and release dates
We are looking at doing the roll-up to SP3
Coexistence of Exchange2007 SP1 and Exchange 2007 SP3
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
Hello everyone,
Can any body let me know what is the latest CPU and PSU patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit).
I found this patch 16042647 i don't no either it's CPU or PSU.
Re: Patch 16042647: Oracle Database Family 11.2.0.3.0 for Microsoft Windows (32-bit) - ORACLE 11G 11.2.0.3 PATCH 15 BUG FOR WINDOWS 32 BIT
ThanksIn readme file i found this that why i am confused.
Table 1 Installation Types and CPU Applicability
Installation Type Latest CPU with Security Fixes
Server homes CPUJan2013
Client-Only Installations CPUOct2012
Instant Client Installations None
(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.) -
SAP List of Supported SQL Server Service Packs and Cumulative Updates
Does SAP provide a list of SQL Server Service Packs and Cumulative Updates that will work with BPC 7.0 and 7.5? I see that CU 12 is out for SP1 and CU 2 is out for SP2. I would like to know if I can move the SP2 CU2 or SP1 CU12. My install docs are outdated specifying SP1 CU6.
Any direction is appreciated.
JoeHi,
Please take a look at the below list of the supported OS: This excerpt is from the installation guide.
SP04 or later: Windows Server 2008 R2 Standard or Enterprise Edition with or without Hyper-V
Windows Server 2008 Standard or Enterprise Edition with or without Hyper-V, or
Windows Server 2008 Data Center with or without Hyper-V
Windows Server 2003 Standard or Enterprise Edition SP2
Windows Server 2003 Standard configured on the SQL database or OLAP server components only
Windows Server 2003 R2 Standard or Enterprise Edition SP2
SAP recommends using Windows Server 2008 64 bit over Windows Server 2003 64 bit. Otherwise, supportability is limited.
I am not sure what did you mean by the front end. Having said that, 32 bit is supported both on the server and the client machines.
Hope this helps. -
2003 Service Pack/ I tunes
I am not able to uninstall programs, or to update I tunes, am unable to change screen resolution and unable to download 2003 service pack 3(SP3).
HELP. I am a teacher and have no money to fix this.Good Day,I asked support about this and they said that "As per 3rd party service packs, we will fully support Windows 2003 sp2 on any platform where we support Windows 2003. We have not fully tested with this recent service pack yet, though we don?t anticipate any issues with it. If customers do encounter an issue we will investigate it."Do check the Support Matrix.Thanks
-
How to find out the IPS and DS Service Pack and patch levels in windows server.
Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
SudheerHi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan -
Service packs and hot fixes for BusinessObjects Enterprise XI 3.1
Hello Experts.
Which is the cronology or order of the service packs and hot fixes for BusinessObjects Enterprise XI 3.1, or which are tha latest?
thanksFor BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
Previous Service Pack is 4.0 and Fix Pack 4.1. -
2008 Engage Server Service packs and Fix Packs
I have Engage Server. I tried to load SP 3 and it didn't let me open old files. SAP told me SP3 was not compatible with Server product. I had to roll back to base version 5.0.0.99 build 12,0,0,121. Does anybody know if I can at least load SP1 or SP2 (and/or Fix packs) so I can have some of the basic features?
Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues. -
Install the latest Service Pack and Cumulative Update
Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker -
CF 7.02 won't install on Windows Server Enterprise 2003,
Service Pack 1, IIS 6.0. When I run the Administrator the message
indicates that MX has been installed but when I open the page with
the web browser the message is Service Unavailable.I get the message when I open try to load ColdFusion
Administrator page or the index page on the cold fusion web site
that I am installing. -
Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration for CR2013; I have S userID and log in; but could not locate the place to download
Hi,
I believe you are right!, The support portal is Showing Crystal Report for VS not the other one;
Our S User ID is out dated might be; It was created when CR 2008 was purchased. But we bought CR2011 license recently as mentioned below.
Below is the product purchased by our organization
CR 2011 INTL UPGR WIN NUL LICENSE - 1 to 2 Licenses, mix and match.
Does this version have maintenance rights?
I tried registering at Service MarketPlace hoping to get new S-User ID; Am i right path to get the new S- USerID ?
During registering it asked for "Customer or Installation Number (1) *" ; Where can i get this info or number; Kindly suggest -
Service Packs and Fix Packs for Business Objects XI Release 2
Hi,
How can I know wich services pack or fix packs are installed on my server? I have installed Business Objects XI Release 2, and Xcelsius 2008 Release 2, and Live Office.
Do you know where can I download a spreedsheet that contains informatiion about the fix packs or service packs and the issues that solved??
Thanks
LiliaYour first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues. -
Zen 3.2 snap shot to force out windows 2000 service packs and critical patches
Zen 3.2 snap shot to force out windows 2000 service packs and critical
patches
has anyone used MSI to do the installations of services packs.All Hotfixes and SPs have switches on the EXEs to allow for silent
installs.
This is the recommended method of deploying these.
[email protected] wrote:
> Zen 3.2 snap shot to force out windows 2000 service packs and critical
> patches
> has anyone used MSI to do the installations of services packs. -
EPM9.3.1: Difference between service pack and service fix
Hi,
Tell me pls, what is a difference between service pack and service fix of Oracle EPM products for 9.3.1 release?
Is it an installation process difference&Hi,
Usually a service pack is a consolidation of service fixes / patches.
Cheers
John
http://john-goodwin.blogspot.com/ -
Difference between service pack and support pack
Hi,
what is the exact difference between service pack and support pack. Are they same?
The version details presnt in integration builder -> help-> inforamtion of my XI server are as follows :
Service pack: 09
Release: 645_VAL_REL
does it mean that the both support package and service package for my XI server are 09?
thanks in adavance
regards
Jagruthi1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04 http://XI 3.0
SP13 + 14 - SP05 http://PI 7.0
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09 and so on...
2) Support pack -
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
A description of how to apply support packages is available in SAP Note 879289.
Maybe you are looking for
-
My HP LaserJet 1300 suddenly stopped working over the AirPort network. Every file that I start to print immediately makes the printer "paused". I reset the printer several times ... I downloaded and installed the MacOSXUpdCombo10.6.8 ... Finally,
-
Using New 32GB Ipd Touch to transfer library to new PC
I just got the new touch and have a new Dell XPS 420 in route, can i use the touch with all 18gb of music and video to transfer to the new pc? I am going from XP to Vista but this doesn't seem to be an issue with Itunes 7.6.1. Any help would be grate
-
OIM design console login error
hi, i am able to log onto oim server (admin console) with xelsysadm and password but when i log onto design console.... it disappears what can be done?
-
Odd appearance of horizontal pointer slide
Hi, anyone have any ideas why Horizontal Pointer Slide numeric controls seem to display oddly when I have the Full Markers/Full Ticks selected? (see the attached image). For some reason all but the right-most marker have a bold appearance. I don't
-
Is there another Driver to connect to Database instead of sun Driver? if exists, please tell me where can I find it? and how sun java compiler can be recognize the new driver. Thanks.