Exchange 2007 Address List Re-Named - Outlook 2007 Clients Show Old Name

I have renamed an Address List in Exchange 2007
Applied the Address List to make sure,
Manually updated the Offline Address Book
Re-Started Microsoft Exchange File Distribution service
Manually downloaded the OAB in Outlook 2007 Client
but the renamed Address list still shows as the old name In Outlook.
The clients are not running in cached mode and the change was made several days ago.
I have searched everywhere and I'm not the first person to have this problem but I can't seem to find an answer to this issue.
Any help much appreciated.
Lee

Hi Lee,
Does the issue also happen in OWA?
If it is, please run Get-AddressList cmdlet to check whether the address list name (display name) is changed in your Exchange 2007. After re-naming the address list, we also need to run the following command to apply the changes:
Update-AddressList -Identity "Renamed Address List"
Then check whether the renamed address list is changed in OWA or not. If it is updated successful in OWA, restart Microsoft Exchange File Distribution service to update the Offline Address Book and manually download OAB in Outlook client.
Thanks,
Winnie Liang
TechNet Community Support

Similar Messages

Is there a way to remove Exchange global address list from phone/Mail app?

I have an iPhone 5 running iOS 7.0.3. Wondering if there is a way I can prevent an Exchange global address list from loading when I compose a message. I am only syncing Mail - not contacts or calendars. Also tried dropping and re-adding account to see if that did anything. This is a personal phone connected to company's Exchange account (legitimately) - I would like to reduce the chance that I incorrectly email a company employee from my personal account when composing a message.

That is what I expected Chris, but to answer your question - yes. I have two accounts setup with the Mail app - Gmail and Exchange. Gmail is the default even. When I am in the Gmail account, compose a new message, just typing "john" for example, brings up most recently used john's first, then all the Johns in my company. I really would prefer not to even have those names populate. Not sure if that can be prevented without dropping the Exchange mail account altogether. That is my question - and thank you for your reply.

List content type columns don't show new names after resource files were changed

Hello,
we ran into a problem, that we're not able to figure out at the moment.
We have a site collection with site columns and site content types defined and created with
features ant their XML files. All display names are retrieved from resource files. We do have
several subsites, that have predefined lists also created from features and their corresponding
XML files. They use inherited versions of these site content types as list content types with
their columns inherited from the site columns.
We had some changes within the resource files and never ran into a problem up to now.
We changed the display names of some of these columns within the resource files. After
these changes the site columns, site content types and list columns show the changes
as planned. Unfortunately the columns of the list content types do not display the changes.
They still show the old name. If you try to alter the old names manually the new name is
shown within the form, but you're not able to save it and the list content type columns
still have their old name afterwards.
We checked our definition files and they seemed to be well.
Any ideas?
Regards,
Markus
List columns as defined within new the resource file:
List content type columns, that do not show the changes from the new resource file:

Hi,
According to your post, my understanding is that you want to modify the site column name in the list.
I try to reproduce the issue, however, everything works well.
You can modify the DisplayName in the Element.xml file.
Then after you redeploy the project, the site column name will be changed in the list setting page.
In addition, please check whether you create the list correctly.
For more information, you can refer to
Walkthrough: Create a Site Column, Content Type, and List for SharePoint
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Exchange Global Address List search not showing name or email

I have an iPhone and iPad connected to a Microsoft Exchange server at work. When I search the GAL for a person in the company, the results are shown as the Company only (data coming from the 'Company' field on the Exchange server) instead of the contact's name.
Here are the steps I'm taking:
- I go to Contacts app, select 'Groups', then select 'Global Address List'
- I type in a name of a person I'd like to email. For example I type John to search for all the Johns in the company.
- I get a seach result that lists anyone with John in their name. The problem is the search results list the company name instead of the user's/contact's name. (If the 'Company' field is blank in Outlook/Exchange, I CAN see the user's name).
So my search results for John look like this:
COMPANY
COMPANY
John Smith
Sarah Johnson
COMPANY
COMPANY
COMPANY
John Deer
COMPANY

There is software available that would give you support for GAL and some other SP2 features on a S60 phone. Check here: http://www.dataviz.com/products/roadsync/series60/index.html
Jason C. -
Office Mobility Blog
http://mobileofficeblog.dataviz.com/

Accessing the global Address List using Java Outlook Connector

Hi All,
I have written a code to access the Global Address List using (Jar) in Java outlook Connector
However i am able to retriev the name and email address of that employee only.
I want the other details like location(particularly).
Please help out.
Thanks,
Arijit.

Ari_Dev wrote:
The scenario is i am an employee and i want to get information regarding other employees(name,location) which are stored in outlook through my java application(using JOC).Just a point of clarification, there is no actual java code in the Sun Outlook Connector. The use of Java with most of our products names is for marketing/branding purposes only.
Now there are employees who are not stored in my address book or local contacts.For them when i try to read the GAL i can get only their name and email address.So the 'cn:' (name) and 'mail:' (email address) attributes are being provided by the directory for a GAL search.
however if i try displaying their details using the JOC it comes with proper information through the outlook pop up but cannot read this data.As I said in my previous response, the data that the Sun Outlook Connector provides in the GAL view is determined by the user that the GAL binds to the directory server as, plus the restrictions that user has on the information the directory server will provide for GAL searches/queries.
This bind user is usually different from the 'super-user' bind user that UWC/Communications Express uses which is why you may see more information in UWC/CE compared to in the GAL in Outlook.
Therefore you need to work with the Directory Server administrator to increase the information that the Sun Outlook Connector user is able to see.
Regards,
Shane.

How do I share Exchange Global Address List (GAL) across different forests without using federated services

We have two domains in separate forests, One forest has Exchange 2013 server, how do we get a constantly up to date Global Address list of users
from the "Other" forest?
Thanks.
Babu

Hi,
We can configure Global Address List (GAL) Synchronization with Forefront Identity Manager (FIM) 2010:
https://technet.microsoft.com/en-us/video/configuring-global-address-list-gal-synchronization-with-forefront-identity-manager-fim-2010.aspx
For more and detailed information about GALSync, please refer to:
http://social.technet.microsoft.com/wiki/contents/articles/1726.global-address-list-synchronization-galsync-resources.aspx
Regards,
Winnie Liang
TechNet Community Support

Exchange 2003 Address List Funny

Hi all.
Just a quick one. I am having a little funny on our exchnage 2003 bridge head server. I just picked it up now when editing an address list. I have created a new address list and when I choose the filter option and choose find, it doesnt find any exchange
servers.
I found out tho it is something to do with DNS.
We have 2 network cards in this Exchnage server. One connected to an internet firewall and one LAN connected to the internal network.
I have no DNS settings on the internal card but have edited the host file with all my domain controllers and exchange server names and IP addresses. I have 2 public DNS server IPs on the WAN side LAN card.
I have done this as sometimes when the internet goes down our internal DNS server cant resolve IPs (Obviously) and no emails get delievered. if I take the Dns settings out the WAN card and put the normal internal DNS ip on the LAN card connected to the internal
network it fixes the issue.
Can i have an internal DNS on the LAN card connected to the internal network, as well as the ISP Dns servers on the WAN side card ?
Many thanks for your time.
Shaun

Isn't your internal DNS server able to resolve names in other domains? Unless you've turned off the "recursive lookups" and haven't provided forwarders you should need only DNS on your internal NIC.
As to your use of a HOSTS file, how are you able to deal with the need to use SRV records? Do you still see your DCs listed in the 2080 Event-IDs with the source "MSExchangeDSAccess" in the Applications event log?
--- Rich Matheisen MCSE&I, Exchange MVP

Display of names in the TO: filed from the Exchange Global Address List

We have a user whose "FIRST" name in Active Directory consists of two names. Like Mary Ellen or Bobby Jo. But both names have been enetered in the TO: field. She is very adamant that she be addressed by both names.
When she receives a message, and if details is clicked, she will see the names of all who the message has been sent to, and she sees only the first part of her name and then her last name. So in the TO: field she'll see Mary Jones instead of Mary Ellen Jones, as an example. If you touch the name, the details will come up and show her full name. However she would like to see the complete "Mary Ellen Jones" in the TO: button. I have discovered that if you enter her name as she wishes in her own contact list, it will then also show all three names as she wiashes. Thought I had her there, but she doesn't want OTHER users who have iPhones to see only Mary Jones, and then would mean I'd someoehow have to populate everyone in the world she sends mail to who have iPhones with her full name in their contacts list. yea.
So is there anyway of having the iphone display the COMPLETE first name it finds in Active Directory instead of just the first part of the first name? So have it show Mary Ellen Jones instead of Mary Jones.

We have a user whose "FIRST" name in Active Directory consists of two names. Like Mary Ellen or Bobby Jo. But both names have been enetered in the TO: field. She is very adamant that she be addressed by both names.
When she receives a message, and if details is clicked, she will see the names of all who the message has been sent to, and she sees only the first part of her name and then her last name. So in the TO: field she'll see Mary Jones instead of Mary Ellen Jones, as an example. If you touch the name, the details will come up and show her full name. However she would like to see the complete "Mary Ellen Jones" in the TO: button. I have discovered that if you enter her name as she wishes in her own contact list, it will then also show all three names as she wiashes. Thought I had her there, but she doesn't want OTHER users who have iPhones to see only Mary Jones, and then would mean I'd someoehow have to populate everyone in the world she sends mail to who have iPhones with her full name in their contacts list. yea.
So is there anyway of having the iphone display the COMPLETE first name it finds in Active Directory instead of just the first part of the first name? So have it show Mary Ellen Jones instead of Mary Jones.

Unread Emails in Outlook 2010 Clients shows both UNREAD AND READ emails when connected to Exchange 2013 Server SP1

We recently upgraded to Exchange 2013 SP1 with a client user-base of Office 2010 Professional Plus / Outlook 2010 SP3.
All Unread Email favorites folders show both Unread and Read emails, just like the inbox. Removal of the folder and recreating yields the same results, as does creating a custom folder. However, in Outlook 2013 there is no problem.
Is there a patch or hot fix for this issue? Or does anyone know how to fix this issue so that the UNREAD EMAILS SHOW UP IN THE UNREAD FOLDER AND NOT INCLUDE THE READ EMAILS?
Thank you!
Kim Parker-Polito / Newhall Land

Go down to Search Folders
- Right click on Search Folders and create New Search Folder leave default "Unread Mail1" and click OK
- Right click on the new “Unread Mail1” folder and choose “Customize this search folder”
- Click on Browse
- Select the checkbox for “Search subfolders”
- Press OK and OK again.
- Right click on old "Unread Mail" Folder and delete.

Macbook Pro showing old name in DHCP Client List

When I originally set up my macbook pro, I gave it a name, we will say 'X'. Since then, I've changed the name to 'Y', however whenever I connect to a wireless access point, if I login to the access point and list the clients, it shows 'X' as my host name. What I have tried:
System Preferences->Sharing and entered the new computers name
Sysem Preferences->Network->Wi-Fi, clicked Advanced and set a Client ID under TCP/IP as well as changed my Netbios name under WINS
I'm at a loss as to why 'X' keeps showing up as the client ID on wireless access points after I've changed it on the system. There must be another location where that is stored.
Short of doing a full file scan for 'X', does anyone have any idea where else I can look and change this on the macbook pro?
Thanks!

Power cycle your dhcp server (router). The dhcp protocol retains ip address and computer information for reassignment to the same device whenever possible. Force the router dhcp router to reconnect and reissue a dhcp address by power cycling the router.

List of avaliable MDX properties / Always show member name instead of alias

Hi all,
does anyone know if there is a list of ALL available MDX properties which can be used in an MDX query with Essbase?
There is a very small list in the technical documentation (http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/mdx_properties.htm), however I know there are a lot more properties.
E.g. one property which is not documented is ANCESTOR_NAMES:
WITH MEMBER [Year].[dummy] AS '0', SOLVE_ORDER = 0
SELECT {[Year].[dummy]} on columns,
[Account].Members properties ANCESTOR_NAMES on rows
FROM [App.Db];
Anyone knows if there is such a list?
And another question:
The Query always brings up the alias of the members (e.g. [Account].Members). Is there a way that per default the member name instead of the alias is used? Without using the MEMBER_NAME property?
Essbase version: 11.1.1.3
Thanks
Th

amaerki wrote:
For the second question regarding the member name try the following statement in a MaxL session:
alter session set dml_output alias off;works like a charm, many thanks.
Anyone an idea on the list of properties?
Edit: found something related to XMLA: http://docs.oracle.com/cd/E12825_01/epm.111/aps_admin/ch03s03s07.html
However, e.g. the porperty PARENT_UNIQUE_NAME does not work. Also the Book MDX solutions has a list with it with e.g. PARENT_UNIQUE_NAME specified which does not work...
Anyone an idea how to get a list of all properties valid with MDX using Essbase?

Exchange 2007 Global Address List

I connect to my organisations Exchange 2007 server.
My address book syncs for my personal contacts, appearing in address book as a brown book icon with an @ symbol.
However, there is also a blue book icon with an "i" on it. When I click on it, in the right hand pane appears "Search [organisation] global address list", but there are no entries.
I can access the global address list either through Outlook Web Access (OWA) or Outlook (on a PC), so I know there are entries there. On OWA, my personal entries appear in Contacts, whereas the global address list appears on OWA in address book.
Any tips on how to access the global address book from within Address Book on Mac?
Thanks in advance.

Further update, if I do a search whilst "Search [organisation] global address list" is displaying, it does search the global address list and bring up results from it.

Address list service failed to respond error on Exchange 2007 (after adding first 2013 server)

Hi,
We just installed an Exchange 2013 server within an Exchange 2007 environment.
The Exchange 2013 (CU6) server will be used to setup a hybrid connection with O365, and move mailboxes to O365.
After installing the Exchange 2013 server it isn't possible anymore to create/enable mailboxes on the Exchange 2007 server.
We end up with an error :
Mig1 TestAccount
Failed
Error:
The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration error.
Exchange Management Shell command attempted:
Enable-Mailbox -Identity 'domain.be/customer/TEMP/Mig1 TestAccount' -Alias 'mig1' -Database 'Exchange2007\SG01\DB02'
When executed via EMS we receive this error :
The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration error

Hi Lyncer
This error can be caused if the default Public Folder Database not being pointed to the exchange 2007 database which you are trying to create a new mailbox.
Also it can happen if System Attendant service is not running.
Troubleshooting steps:
1) Restart the System Attendant Service
2) Point the affected database to the default public folder
Follow the below steps to do that
Open EMC
Go to Organization Configuration > Mailbox.
Select the mailbox database that you want to change the default public folder database.
Right click the database and select properties
In <Mailbox Database Name> Properties, click the Client Settings tab.
Next to the Default public folder database box, click Browse.
In Select Public Folder Database, select the public folder database from the list of public folder databases, and then click OK.
Cheers!!!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Vista Biz \ DTM 4.7 \ Bold \ Outlook 2007 and Exchange 2003 Nightmare! Help Please

Hi
I am trying to sync my Exchange Pub Folder (Calendar and Contacts) to my BB 9000 and it fails when I select 'MAP' in the DTM sync process.
Vista Biz
DTM 4.7
Outlook 2007
Exchange 2003
Bold
I am local\admin perms and Owner perms on the Exchange \pub folders but it crashes as soon as I select the MAP button.
On my WinXP Pro, using Outlook 2003 and the same exchange it works out of the box, but with Vista and Outlook 07 it crashes. Has anyone experienced this?
Thanks
Karl

It would appear that at least in certain situations Exchange 2003 can't "understand" what Outlook 2007 pushes into the mail store, which is an issue when anything tries to connect via POP or IMAP as the server tries to "render" an Internet standard message, and fails.
Some info here, particularly the bit by Buddha377
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/c63b871 3-9ef9-4076-a11b-5db08255689b
Sounds like your iPhone sync may be suffering the same way??
P.S. Simply reading a message with OWA can "repair" email messages, I've witness this myself seeing Mail.app show "garbage" for a certain message pulled via IMAP, OWA showing the message fine, then all of a sudden Mail.app showing a perfectly formed message.

Outlook 2007 compatiable with Exchange server 2013

Hi
I would like to ask, i have outlook 2007 and Exchange server 2013, when i configure outlook 2007, i fail to configuration, Is it outlook 2007 compaitable to exchange server 2013.

Yes, Outlook 2007 is supported. Make sure that the Outlook 2007 clients are fully updated. As a minimum, you need
SP3 for office 2007,
kb2687404 and
kb2768023.
Again, the best approach is to have all office 2007 updates installed.
Step by Step Screencasts and Video Tutorials

Exchange 2007 Address List Re-Named - Outlook 2007 Clients Show Old Name

Similar Messages

Maybe you are looking for