Exchange 2007 and outlook 2010 frequent disconnects

Hi,
Im having issues on SBS 2008 with exchange 2007 and outlook 2010.
Every so often users disconnect and outlook then requires them to put there password in but if you restart outlook all is fine till the next time its random aswell.
I have checked in IIS if windows and basic authentication are enabled which they are.
If i dont use outlook anywhere i still get this problem.
I have looked on the internet but everything i try doesnt seem to help me any ideas ?
Thanks

Hi,
Before going further, would you please let me confirm whether all users (with all Outlook) encounter this same
issue? Did you install any update or any third-party application on the server before this issue occurred?
à
Im having issues on SBS 2008 with exchange 2007 and outlook 2010.
Would you please let me confirm whether installed Exchange Server 2007 SP2 (or SP3)? Did you install all necessary
Update Rollups for the Exchange Server 2007?
Please type
outlook.exe /safe in RUN to start Outlook in Safe Mode, then check if this issue still exists. Meanwhile, please navigate to the website which contains Exchange Virtual Directories in IIS Manager, then enable kernel-mode authentication for each directory
and monitor the result.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Issue with Exchange 2007 SP3/Outlook 2010 User account Auto accepting Appointments

0
Hi
I have an issue with 2 users who's appointments are being Auto-accepted or Auto Declined. As these are User Mailboxes there is no resource scheduling set on these. I've also checked for delegates (none), Rules (including running outlook.exe /cleanrules).
If I send the user some test appointments when they are not logged into Outlook, the appointments are not processed. If the user logs in through OWA then the appointments are not processed. When the user logs into Outlook 2010 (using Mapi) the appointments
are processed within 5-10 minutes. I started to think it may be a PC issue, something buried in the registry. But I give myself full access to the account and logged in from my machine using Outlook 2010, the appointments are auto processed, again, within
5- 10 minutes .
Lots of stuff on the internet all pointing to Resource scheduling, delegates or Rules but I have now discounted all of these.
If I check the users MailboxCalendarSettings, AutomateProcessing is set to AutoUpdate and not AutoAccept. The Outlook Client has all settings in Resource Scheduling unticked.
Thanks
Darran

Hi Darran,
If there is no delegate configured, no rules and calendar processing is also set properly, please switch Outlook to Online mode to check whether the issue persists. Also close Outlook and receive test meeting request directly in OWA to double check the mailbox
would not automatically process the meeting in OWA.
If the issue happens in Outlook Online mode but not continues in OWA, please restart Outlook in safe mode or change a new computer with fresh Outlook 2010 to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Search function not fully working with Exchange 2007 and Outlook 2007

The Search function in outlook is partly available.
I can only search into the inbox with basic search.
Advances search functions an dsearching into subfolders is not available.
As you can see in the screenshot, the options are greyed out.
Situation:
W2k8R2 + Exchange 2007 (windows search role not installed)
W2k8R2 + Outlook 2007 (windows search role not installed)
Question:
- Does the search role need to be installed on the exchange server to provide full search functionality?
- Does the search role need to be installed on the client (server) to get the search funtion fully available in Outlook?
I can't find this awnser if I search in google of technet, so hope someone can help me with this.

As I already wrote to you, the current forum is for developers. I'd recommend asking non-programming questions in the
Outlook IT Pro Discussions forum instead.

How do I set up Contacts and Calendar using iCloud on a PC Office 2007 and Outlook 2010

I get a message saying, "Your setup couldn't be started because of an unexpected error". I'm using Windows 7 Professional with all updates. Mail, bookmarks, and photostream seem to be set up already.

Your data is in Outlook, in the iCloud account instead of the local (Personal Folders) account.

Exchange 2010 and Outlook 2010 Offline Address Book Download

Hi All,
Strange problem that I can't seem to get to the bottom of.
On a couple of users, about 10/100, can't seem to download the Offline Address Book. When they do a manual Download Address Book through Send/Receive Group, the progress window will remain at about 5% and the status will show "Copying Offline Address Book
Template File". If I leave the window, it will be the same for a couple of hours without erroring out.
We have a casarray set up, forced the ports to 59595 and 59596 for the address book as mentioned the guide. We are not doing SSL redirect on the Virtual Directory. Test-AutoConfiguration from Outlook returns the correct entries. Works for most users but
not all.
On the users that do not work, I've tried deleting the users profile, deleting the Outlook Directory under AppData. Sometimes, magically (for a lack of a better word), if I check the Offline Address Book Directory a few days later, there are files there.
If I then do a manual Download, same thing, the progress bar will be stuck.
Puzzling as I'm not quite sure what else to check.
All clients are on Windows 7 and Outlook 2010.
Any ideas?
Thanks,
Dave K

I also used your recipe --disconnect the wireless mouse-- and the OAB update worked right away.
     (It is not a Microsoft mouse.   )
Thanks for the information.
I have been trying to find information on non-HID.
If you have any quick tips or a pointer to info about this, I wanted to get a better understanding of this topic.
Does this "wireless" for the mouse use the same "wireless" for the laptop regular network access via WiFi ?
(We had some evidence that when the laptop did not use the wireless mouse the OAB worked OK and/or when the laptop was running only on WiFi the OAB worked OK.    Not sure if this is all the same root cause.)
Also, does anyone know if this is something that Microsoft will fix at some point ?
We are trying to determine if "few or many" people here might be having OAB failures and have not reported it.
Thanks again.
keywords ---- Outlook 2010 Offline Addrress Book update OAB Exchange 2007 cache mode wireless mouse Windows 7 W7 hung manual OAB update scheduled / automatic OAB update
==

Difference between Exchange 2007 and 2010

Hello,
I want to know what are the differences between Exchange 2007 & 2010, i mean what was missing in 2007 which is addresses in 2010. Both from Administrator point of view and client point of view. How admins are going to benefit from 2010 and how clients
will see changes in their outlook 2010 because of Exchange 2010?
Hasan

Hello,
Can you Please help me out, what is the Difference?
Difference between Exchange 2003 and 2007
Difference between Exchange 2007 and 2010
Thanks

Getting UConn 8.5 to work with both Exchange 2007 and 2010

According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers. I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error. If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes. This will be a real pain if I can't do this with one service. I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010! Anyoe know how to do this?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

How to Import Contacts and Categories from outlook 2007 to outlook 2010

Hi,
I cannot import my contacts/categories from Outlook 2007 to OUtlook 2010. I have tried using a.csv file but it forces Outlook to stop responding every time it starts to import. Not sure how I do it using a .pst data file. Please help!

You can try to export/import categories using OutlookFreeware.com's
free
Export Master Category List and
Import Master Category List tools. There are also free utilities for
exporting contacts and
importing contacts, give it a try!Alexey Kuznetsov,
Relief Software

Exchange 2007 and 2010 with Unity Connection 8.6

Hi all,
We have unity connection 8.6 and exchange 2007 currently in place and runnign fine. I am ready to start migrating mailboxes over to our new exchange 2010 farm and as such we will be in co-exsistance with exchange 2007 and 2010 for awhile. What are the steps or procdures to also include exchange 2010 with the 2007 in unity connections? Currently under Smart Host is the IP address of our exchange 2007 server.
Thank you.

Hi,
This depends on how you plan on performing the migration. I would suggest the following:
-Creating a new unified messaging service for Exch 2010. You can re-use the same service account name as long as you completed the configuration steps for that integration.
-As you move over user's mailboxes from 2007 to 2010, you can delete the 2007 UM service and add the new 2010 UM service. If you want to change many users at a time you'll need to use bulk administration to change them. If you use BAT to change accounts, see the link below where I have listed them out for another CSC user.
-You can change the Smart Host setting once you have configured the Exch 2010 enviornment to handle your main corporate mail (changing the MX records to point to a 2010 Edge Transport).
Changing the UM service with BAT:
https://supportforums.cisco.com/message/3572200#3572200
Good luck.

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

Free/Busy not working Exchange 2007 and 2013 co-existence

Hi,
I'm migrating our Exchange 2007 environment to Exchange 2013. Now I am in a co-existence environment where all the mailboxes except some test-users resides on Exchange 2007. Between Users on the same Exchange MBX Server athe FREE/BUSY Information sharing
works correctly, but between Exchange 2007 and 2013 it's not working.
I verified my settings and also the EWS virtual directory on 2007 CAS Servers using Get-WebServicesVirtualDirectory.
The internal and the external URLs are set to https://legacy.mydomain.com/....
What am I missing?
Thanks & Kind Regards,
Jürgen

Hi,
According to your description, I understand that the free/busy information between Exchange 2007 and Exchange 2013 is not available for your coexistence environment. To narrow down the issue, please check the following points:
1. Does the issue happen to all users or specific users?
2. Although a user on Exchange 2013 can't get free/busy information from a user on Exchange 2007, please confirm whether Exchange 2007 user can get free/busy information from Exchange 2013 users.
3. Close Outlook and only access user mailbox from OWA to check whether the issue persists. For Outlook client,
create a new Outlook profile
to have a try.
4. Please make sure the virtual directories settings are configured correctly in both Exchange 2013 and Exchange 2007.
Virtual directories settings in Exchange 2007:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
Certificate and Virtual directories settings in Exchange 2013:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-2-step-by-step-exchange-2007-to-2013-migration.aspx
5. Restart IIS service in Exchange server by running iisreset /noforce from a command prompt window.
If possible, please run Test E-mail AutoConfiguration in Outlook to check whether the autodiscover service can get correct Availability service URL in the results. If there is any event logs, please collect some for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Itunes 10.4 and outlook 2010

My iphone 4 is connected to itunes 10.4 but when I select the "info" tab I am not able to sync Calendars or mail accounts as Outlook 2010 doesn't appear to be talking to itunes or vice versa.
Any ideas please.

Hello, Ran12345.
Thank you for visiting Apple Support Communities.
It is still possible to sync contacts and calendars from Outlook using iTunes. If you are experiencing issues with this, here is the best article to go through.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/ts2776
Cheers,
Jason H.

TS3999 I installed ic;oud on my iphone 4s and my pc laptop ruunning windows 7 and Outlook 2010, my new calendar information is not syncling? Thoughts?

I installed iCloud on my iPhone 4S and PC running Windows 7 and Outlook 2010. My calendar is not syncing when I put in new information. Solutions?

I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

Exchange 2013 with Outlook 2010 anywhere - Public Folders disappear from Outlook favourites

Hi,
we have a 3 server Exchange 2013 SP1 DAG published with Forefront TMG.
Outlook 2010 anywhere connection works fine (only anywhere connection is possible, there are no clients in the exchange server AD).
The users are adding public folders to their local Outlook favorites. In about 10% of the Outlook starts, those public folders are missing in the favorites. Local favorites folders are still there, public folders are connected.
After restarting the Outlook a few times, the favorites are back.
Deleting the outlook.xml brought no success, the favorites seem to be saved somewhere on the exchange server.
Outlook 2010 is up to date, all hotfixes are installed.
There are no related entries in servers or clients eventlogs, the logs of the TMG server are normal.
Does anyone have a simular behavior?
Thanks in advance!

Hi,
According to your description,it is clear that something got corrupted, but it is hard to say directly what caused it. However, there are a few troubleshooting steps to determine what caused it and you can also make a backup of your Favorite Folders list
so you can easily restore it when it still happens.
Pleaser refer to the following article:
Favorite Folders empty upon restart
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot
make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope this helps!
Thanks.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Niko Cheng
TechNet Community Support

Exchange 2007 and outlook 2010 frequent disconnects

Similar Messages

Maybe you are looking for