Exchange 2007 CCR Cluster SP1 to SP3 failback

If for some reason SP3 causes issues, we would like to be able to leave the offline node at SP1 for a day or so. Is this possible? Will it actually failover to a lesser version or will it complain and fail? Other gotchas with this possible plan?

I understand the directions and proceedure. I have went through the URL Shekhar37k noted many times.
"You don't want the newer version cluster to fail over to the previous version node." Why not? I have not been able to find any documentation as to why or whynot.
In the SQL world SQL 2008 supports this as a method of undoing an upgrade. See here:
http://support.microsoft.com/kb/958734. We have actually had to do this in our environment due to new bugs being introduced ocassionally.
Exchange doesn't support uninstalling a Service Pack. So the prospect of going SP3 immediately on both nodes and having no recourse but to tear it all down and rebuild does not excite me.

Similar Messages

Methods of Performing Maintenance on a Two Node Exchange 2007 CCR Cluster

What methods do you have for performing maintenance on a two node Exchange 2007 CCR cluster? This is what I use:Via the EMS (pre-maintenance steps)On the passive node: Get-StorageGroup | SuspendGroupCopyCheck Event ViewerOn the passive node, check replication status: Get-StorageGroupCopyStatusOn the active node, check replication status: Get-StorageGroupCopyStatusCheck Outlook is still working for usersGet-ClusterMailboxServerStatus -identity CLUSTERNAMEVia the EMS (post-maintenance steps)On the passive node, resume replication: Get-StorageGroup | Resume-StorageGroupCopyOn the passive node, check replication status: Get-StorageGroupCopyStatusUseful ArticlesApplying Exchange 2007 Rollups to Clustered Mailbox Servers:https://technet.microsoft.com/en-us/library/bb885043(v=exchg.80).aspxMove a Clustered Mailbox Server in a CCR environment:...
This topic first appeared in the Spiceworks Community

I thought the virtual IP address by virtue of being 'virtual' should not change? :)
I guess it makes more sense to add the Virtual IPs. You can even add multiple hosts (with different IPs).
Regards
Farrukh

How to install a set of mixed clustering exchange server (Coexistence between 2007 CCR cluster with 2010 DAG or 2013 DAG)

I need a mixed clustering environment that coexist 2007 CCR cluter with 2010 DAG or 2013 DAG.
Is there any step-by-step article I can refer to?

Hi,
Do you want to know how to migrate CCR to DAG?
If you want to migrate from CCR to DAG, there are two available ways to achieve this.
One is to bring the new hardware, the other is to break and format the existing Exchange 2007 CCR Cluster to use the hardware.
Bring the new hardware, you need to install new server and configure Exchange 2010 DAG, then move mailbox from Exchange 2007 to Exchange 2010.
Breaking the existing Exchange 2007 CCR Cluster, you need to decommission your passive Exchange Server 2007 SP2 Node first, re-install Exchange 2010 server role on this server, and then configure Exchange 2010 DAG using this server. After that, you
can migrate mailboxes from Exchange 2007 to Exchange 2010, remove the last Exchange 2007 server. Then add seond server to existing DAG.
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system

Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the field

Duplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here

Using Recovery Storage Group to recover a single mailbox in Exchange 2007 CCR

Hi, there:
Our Environment: Exchange 2007(SP3) CCR
Now we got a task to recover a mailbox which is still on Exchange 2007 now(but it is suspected the owner deleted many emails before he left and these deleted items is NOT recoveralble through dumpster). They want to recover this mailbox to a point
of time where they believe these email items is not deleted at that time.
By reserach below is the steps which can be porformed:
1): Create a RSG and a mailbox database which is linked to the original mailbox database which host the single mailbox that we want to recover.
2): restore the mailbox database backup to this mailbox DB under the RSG.
3): Merge the recovered single mailbox to the existed one.
My question is:
When I create the RSG and the mailbox DB under this RSG using the tool on EMC, can I specify the path of "System folder path" and "mailbox DB file path" on drive other than C:, the C: drive on Exchange CCR active node does
NOT have enough disk space so it has to be created somewhere othan than C: drive?

Hi, Andy:
Thans for your post.
I have a look at
http://technet.microsoft.com/en-us/library/aa997694(v=exchg.80).aspx.
One thing I have question is when you use cmdlet to create a RSG:
new-storagegroup -Server <Server_Name> -LogFolderPath <path_to_Logfiles> -Name <RSG_Name> -SystemFolderPath <Database_Path> -Recovery.
What should be the <server_name>?
we use CCR, if I want to use this cmdlet to create a recovery storage group on current active node of CCR, do I need to enter the actual name for this active node, or I juts need to enter the cluster name?

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Upgrade of Exchange 2007 SP2 rollup 5 to SP3

Hi,
We are trying to Upgrade Our Exchange 2007 server from todays SP2 With rollup 5 to the SP3 package.
During the installation it stops right after stopping all of the services and asks for the exchangeserver..msi file, if i point it the that file in the SP3 package it still just asks me for the file again.
Exchange Server is running on a Windows Server 2008 system
Any ideas of what the solution could be?
e is what i have from the exchangesetup.txt:
[02.04.2014 22:56:54] [0] Setup will run the task 'uninstall-msipackage'
[02.04.2014 22:56:54] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[02.04.2014 22:56:54] [1] Beginning processing.
[02.04.2014 22:56:54] [1] Property 'PackageName' is 'exchangeserver.msi'.
[02.04.2014 22:56:54] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
[02.04.2014 22:59:50] [1] [ERROR] Unexpected Error
[02.04.2014 22:59:50] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. The installation source for this product is not available. Verify that the source exists and that you can access it. Error code is 1612.
[02.04.2014 22:59:50] [1] [ERROR] The installation source for this product is not available. Verify that the source exists and that you can access it
[02.04.2014 22:59:50] [1] Ending processing.
[02.04.2014 22:59:50] [0] The Exchange Server Setup operation did not complete. For more information, visit
http://support.microsoft.com and enter the Error ID.
[02.04.2014 22:59:50] [0] End of Setup
[02.04.2014 22:59:50] [0] **********************************************
And here is the relevant from the exchangesetup.msilog file:
=== Verbose logging started: 02.04.2014 22:56:54 Build type: SHIP UNICODE 4.05.6002.00 Calling process: D:\Temp\exchange\Setup\ServerRoles\Common\ExSetup.exe ===
MSI (c) (48:20) [22:56:54:795]: Resetting cached policy values
MSI (c) (48:20) [22:56:54:795]: Machine policy value 'Debug' is 0
MSI (c) (48:20) [22:56:54:795]: ******* RunEngine:
           ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (48:20) [22:56:54:796]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (48:20) [22:56:54:796]: Grabbed execution mutex.
MSI (c) (48:20) [22:56:54:800]: Cloaking enabled.
MSI (c) (48:20) [22:56:54:800]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (48:20) [22:56:54:809]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (34:B8) [22:56:54:815]: Running installation inside multi-package transaction {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
MSI (s) (34:B8) [22:56:54:815]: Grabbed execution mutex.
MSI (s) (34:88) [22:56:54:818]: Resetting cached policy values
MSI (s) (34:88) [22:56:54:818]: Machine policy value 'Debug' is 0
MSI (s) (34:88) [22:56:54:818]: ******* RunEngine:
           ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (34:88) [22:56:54:819]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (34:88) [22:56:54:820]: Warning: Local cached package 'C:\Windows\Installer\b335acd4.msi' is missing.
MSI (s) (34:88) [22:56:54:820]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (34:88) [22:56:54:820]: User policy value 'DisableMedia' is 0
MSI (s) (34:88) [22:56:54:820]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Looking for sourcelist for product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Adding {24B2C164-DE66-44FE-B468-A46D9D5E6B31}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media is enabled for product.
MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Trying source C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\.
MSI (s) (34:88) [22:56:54:821]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (34:88) [22:56:54:821]: Note: 1: 2203 2: C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\exchangeserver.msi 3: -2147287037
MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing net source list.
MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing media source list.
MSI (s) (34:88) [22:56:54:824]: Note: 1: 2203 2: 3: -2147287037
MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Processing URL source list.
MSI (s) (34:88) [22:56:54:824]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: 3: exchangeserver.msi
MSI (c) (48:F0) [22:56:54:825]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (48:F0) [22:56:54:825]: User policy value 'DisableMedia' is 0
MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Prompting user for a valid source.
MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'DisableBrowse' is 0
MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Browsing is enabled.
MSI (c) (48:F0) [22:56:54:830]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (48:F0) [22:56:54:830]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Media is enabled for product.
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: 3: exchangeserver.msi
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing net source list.
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing media source list.
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Trying media source ;1.
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: 3: exchangeserver.msi
MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing URL source list.
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: 3: exchangeserver.msi
MSI (c) (48:14) [22:58:49:184]: SOURCEMGMT: Trying source D:\Temp\exchange\exchangeserver.msi.
MSI (c) (48:14) [22:58:49:184]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ExpMSI (s) (34:B8) [22:59:50:653]: I/O on thread 5248 could not be cancelled. Error: 1168
MSI (s) (34:B8) [22:59:50:653]: I/O on thread 6584 could not be cancelled. Error: 1168
MSI (s) (34:B8) [22:59:50:653]: I/O on thread 3208 could not be cancelled. Error: 1168
MSI (s) (34:B8) [22:59:50:653]: I/O on thread 9372 could not be cancelled. Error: 1168
MSI (s) (34:88) [22:59:50:654]: SOURCEMGMT: Failed to resolve source
MSI (s) (34:88) [22:59:50:655]: MainEngineThread is returning 1612
lorer 3: 2
MSI (c) (48:14) [22:58:49:251]: SOURCEMGMT: Source is invalid due to client source out of sync (product code is the same).
MSI (c) (48:14) [22:58:49:252]: Note: 1: 1731 2: -2147483645 3: exchangeserver.msi
MSI (s) (34:B8) [22:59:50:656]: User policy value 'DisableRollback' is 0
MSI (s) (34:B8) [22:59:50:656]: Machine policy value 'DisableRollback' is 0
MSI (s) (34:B8) [22:59:50:657]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (34:B8) [22:59:50:657]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (34:B8) [22:59:50:658]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (34:B8) [22:59:50:659]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (34:B8) [22:59:50:660]: Restoring environment variables
MSI (c) (48:20) [22:59:50:663]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (48:20) [22:59:50:664]: MainEngineThread is returning 1612
=== Verbose logging stopped: 02.04.2014 22:59:50 ===

Hi
Its the problem with the installation file
Its better you download a fresh installation pack from the tech-net and start the upgrade and it will be successful probably the latest one below SP3 RU9
http://www.microsoft.com/en-us/download/details.aspx?id=36016
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you
But that download is only the rollup 9 for the SP3.
The current system is SP2 With rollup 5, will i not have to Upgrade With the SP3 package first?
Before moving on to the rollups?

Query for exchange CCR cluster information

Hey Scripting Guys,
I am looking for a way to determine which is the passive node of my Exchange 2007 CCR cluster. I use an imaging tool to backup the server, and I need to suspend replication, image the passive node, and then resume replication. I have all the replication starting and stopping working, but I would like to be able to check to make sure I am hitting the passive node. For now, I am assumeing that the second node is the passive one, but in the event it fails over, I don't want to miss a backup. Is there a powershell command that will pull this info for me?
Rich

Hi,
How do i export the results to txt or CSV. I tried with the below command, but it returens me only one server, This below are the commands in used for the Clutsers servers
$Clusters = Get-MailboxServer | ? {$_.ClusteredStorageType -ne "Disabled"}
ForEach ($Cluster in $Clusters) {
   $ClusterStatus = Get-ClusteredMailboxServerStatus -Identity $Cluster.Name | Select -Expand OperationalMachines | Where-Object {$_ -notmatch 'Active'}
   $PassiveNode = $Clusterstatus.Split(" ")[0]
   Out-File -FilePath "XXXXXXX.txt" -InputObject $Passivenode

Deleting the old Exchange 2007 mailbox entry safely from ADSI Edit ?

Hi,
I'm having problem with the old Exchange maiilbox 2007 CCR cluster name still showing whenever I use the Powershell script:
Get-MailboxServer | Select Name, AdminDisplayVersion, ServerRole, ExchangeVersion, IsValid, ExchangeLegacyServerRole, DistinguishedName
Can anyone please assist me what to backup first before so that I can safely remove / delete the following highlighted entry from my domain controller:
Is that the correct location where I can safely delete the old Exchange Server mailbox entry ? All of our Exchange Servers are 2010 SP2.
There is also the computer object named MAILBOX when I do the search in
Active Directory Users & Computers console.
So can anyone please clarify if this is the best and safest way to do without causing any email downtime ?
/* Server Support Specialist */

Hey there,
You need to ensure that you have the following backups in order to proceed with the decommissioning process:
1. System State Backup of your Active directory
2. Exchange Database Flat file Backup
3. Run ExBPA Report and Export the Report for future reference.
4. Go to Registry Editor and Export “My Computer” as Registry backup.
Yes you are at the right location to safely delete the old Exchange Server mailbox entry .
The best & cleanest way is to delete the whole server object. This wouldn't break your Exchange 2010 configuration. But make sure you don't delete the “Servers” folder itself.
Feel free to revert back for further queries
Thanks
~Phil

Exchange 2007 Active Sync Issue with 1 users mailbox

Good Afternoon,
Server OS: Small Business Server 2008
Exchange: 2007 Standard - Update Rollup 13 SP3
Mobile phone: Blackberry Z10
We are in the process of decommissioning our Blackberry Enterprise Server, and down to one user. I am able to setup Exchange on his new non BES server tied phone, but it will not sync any email, all Meetings, and only some contacts. I have tried
adding this account to an Android phone with the same results. I have numerous times went into EMC and delete the Mobile device, when re-adding the account, everything seems to point to his exchange account being the culprit. I am getting the below
Active Sync error after adding his account. I have Bing / Googled around, and nothing of substance I have found. Thank you in advance!
Log Name: Application
Source: MSExchange ActiveSync
Date: 3/24/2015 2:01:15 PM
Event ID: 1008
Task Category: Requests
Level: Warning
Keywords: Classic
User: N/A
Computer: SISBS.internaldomain.local
Description:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ActiveSync" />
<EventID Qualifiers="32772">1008</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-24T19:01:15.000Z" />
<EventRecordID>4756229</EventRecordID>
<Channel>Application</Channel>
<Computer>SISBS.internaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356</Data>
<Data>--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---</Data>
</EventData>
</Event>

Hello,
Yes, it means the mailbox is corrupted. The most efficeint way is to rebuild the user's mailbox.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Iphone3g, Exchange 2007, pf firewall

Scenario: Iphone 3G, Exchange 2007 update 7-sp1, no front-end server, no ISA server. I have setup the firewall (packet-filter, openbsd) to allow 443 to our internal Exchange 2007 server. I have also setup a verisign certificate for the external public dns name being contacted by the iphone. I am able to access the owa link through the firewall with the iphone, but the Exchange mail cannot verify the account.

You need to install the cert on the phone.
See
http://www.techsack.com/2008/08/19/getting-your-iphone-to-work-with-exchange-act ive-sync-ssl-certificate/

Applying OS SP2 to existing Windows Srv 2008 SP1 w/ Exchange 2007 SP3 w/RU 5, before installing RU13

We are in the process of planning the deployment of Windows Server 2008 SP2, latest MS updates, and update rollup 13 for Exchange 2007 SP3. Looking to migrate to Exchange 2013 & Exchange online in the future
Are there any issues that we need to be aware of before proceeding with the big updates. Exchange is running fine, but we're not able to fully patch these servers unless SP2 is installed. Thanks a bunch.
Environment:
running Exchange 2007 SP3 with update rollup 5 for all of our email servers (CCR, HUB/CAS w/WNLB). The OS installed for all of these are Windows 2008 SP1 (6.0.6001
Service Pack 1 Build 6001), latest MS critical updates are the only recent updates installed.
We also have Forefront Security for Exchange that I might remove.

Hello,
Do you mean you want to upgrade Windows Server 2008 SP1 to Windows Server 2008 SP2, and then upgrade Exchange 2007 SP3 with rollup 5 to rollup 13? If so, the OS not being upgraded to a new version.
If you want to deploy Exchange 2007 SP3 with rollup13, you must install Windows Server 2008 SP2 on a computer that does not have Exchange installed, and then install Exchange 2007 SP3 with rollup 13, and move your mailboxes to new Exchange Server.
Based on your environment, you need to upgrade a clustered mailbox server, you must build a new failover cluster using Windows Server 2008 SP2 as the operating system for all nodes, and then migrate the data from the old cluster to new cluster.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

How to upgrade Exchange 2007 from Sp1 to SP3 RU13

Hi everyone, I have a mail system Exchange 2007 SP1 CAS and HUB with 3 servers.
The mailboxes are on a Windows Server 2008 Failover Cluster.
Domain controllers are Windows Server 2003 SP2
I have to update the mail system with Service Pack 3 and RU13.
Does anyone can tell me the procedure? where I have to start by the CAS / HUB or cluster mailboxes?
How do I update the cluster of mailboxes, the resources on the active node and update it, or liability?
There's something I have to take intoaccount before upgrading?
I can upgrade directly to SP3? or I have to upgrade before SP2? thank you very much
Microsoft Certified IT Professional Server Administrator

http://technet.microsoft.com/en-us/library/bb885043(v=exchg.80).aspx
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers
and
http://technet.microsoft.com/en-us/library/ee221147(v=exchg.80).aspx
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
and, yes, you can go straight to SP3
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Uppgrading Exchange 2007 from sp1 to sp3 on small business server 2008 sp1

Hello everyone
I know this topic has been discused many time in this froum. but i have to ask it again in my exact situation.
I have a realy unstable and unsafe server which i am planing to migrate all the apps and services to some virtual servers soon.
first migrating is Exchange. i have Exchange 2007 sp1 on my server sbs 2008. i have my DC,AD, dns, DHCP, File, etc on the same server as well . So that is way it is scary for me (as i am not really experienced) to even upgrade one service pack.
Now, i want to know if anyone did it before. What should i expect during upgrading or after that? so i can be ready for that?
which kind of backup can save me if somethings happens to my Exchange? is there any way to install the new Exchange 2007 and sp3 rollup 10 and then migrate all databases and mailboxes to that new server? if yes, how to do that?
Thanks
Nima

Hi Nima,
Ok, I know your concern. Please make sure you have read the above KB I provided before installing SP3 for Exchange 2007. What's more, you need to make sure you right mouse click and run as admin to install it.
Moreover, here is a thread about migrating Exchange 2007 SP3 to Exchange 2013 for your reference.
Migrate SBS 2008 R2 running Exchange 2007 to Windows Server 2012 Exchange 2013
http://social.technet.microsoft.com/Forums/en-US/4c9b96c2-fd5e-4fbe-8b3a-fb5b3ab29da8/migrate-sbs-2008-r2-running-exchange-2007-to-windows-server-2012-exchange-2013?forum=smallbusinessserver
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Upgrade Exchange 2007 sp1 to sp3

Good day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - "    Organization Checks              ......................... FAILED
     Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Hub Transport Role Checks        ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Client Access Role Checks        ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Mailbox Role Checks              ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
Brian

Good day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - "    Organization Checks              ......................... FAILED
     Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Hub Transport Role Checks        ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Client Access Role Checks        ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
    Mailbox Role Checks              ......................... FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
Brian
Prepare the domains as required. You have to prep the forest first for SP3 before upgrading Exchange itself
Follow all the instructions
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2007 CCR Cluster SP1 to SP3 failback

Similar Messages

Maybe you are looking for