Exchange 2007 on Windows 2008R2 with Windows 2012 DC

Hi All,
I am going to update DC from Windows 2003 Sp2 to Windows 2012 R2 (Add a new Windows 2012 DC at first and turn off Windows 2003 DC after). Just think about our Exchange server, which is Exchange 2007 SP3 (08.03.0297.001) on Windows 2008R2 SP1. Do I need
update Exchange to 2010 or I can keep it as is?
Thanks,

What service pack, what rollup?
With SP3, RU13, you should be OK for the domain controller itself:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
However...
The domain / forest functional level cannot be at Windows 2012 R2.
Maybe that will be supported in a future rollup (?).
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Similar Messages

Windows Intune with SCCM 2012 R2.

Windows Intune with SCCM 2012 R2.
I am able to download Certificate Signing Request (CSR).
When I submit CSR file to Apple Push Certificates Portal I get following prompt:
Do you want to open or save create02fe592d.json (132 bytes) from identity.apple.com?
I am unable to get the APN Certificate.

That is a known issue with Internet Explorer and the Apple Website. If you just go back to the main page where all your certificate are located you can download it from there.
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

I purchased a new camera with an Adobe Photoshop Lightroom 5 disk. I have a windows pc with windows 8.1. I have downloaded and removed about 5 times. It says installed correctly but every time i hit the icon the pc freezes and I have to reboot HELP

I purchased a new camera with an Adobe Photoshop Lightroom 5 disk. I have a windows pc with windows 8.1. I have downloaded and removed about 5 times. It says installed correctly but every time i hit the icon the pc freezes and I have to reboot HELP

uninstall your lr 5.
install lr 5.7.1 and use your serial number to activate.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

After change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

after change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

Hi: You should be able to use most of the W7 x64 drivers and software from the HP 255 G2 on your model except the BIOS and firmware files. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6431940&swLangOid=8&swEnvOid=4063 Your notebook has the Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, so that is the wireless driver you need. Additionally, you need these usb3 drivers. Install both and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125616_1 http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123787_1

Can Exchange 2007 to be integrated with SharePoint 2013

Can Exchange 2007 to be integrated with SharePoint 2013?

In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Excel 2007 .xlsm Application compatable with Windows 8.1

I have finely lost the plot, for weeks I have been trying to load an Excel macro .xlsm file created on a Windows 7, with Office 2007 Professional on to a brand new computer running Windows 8.1 with Office 2007 Enterprise. on opening the file
in Excel I get "compile error in hidden module". I tried everything to repair this without any success all the research pointed to reinstalling Office so bought Office 2013 and installed it. Same thing "compile error" indecently the
very same Excel .xlsm file runs perfectly on another machine running Windows XP and Office 2010. Further more another application which uses Excel for invoices and reports could not even find Excel. Researching the internet I find that Office
2013 has compatibility problems with Windows 8.1 Well done Microsoft!
I called the Microsoft help line to find if there is a fix and ended up somewhere in India speaking to someone in a language worse than pigeon English 20 minutes later and diverted twice I explained the problem and was asked for my contract number...
Duh! I said what about the warranty and was told sorry can't help you. Well done Microsoft!
Uninstalled Office 2013 and replaced it with Office 2010 home and student. deleted all the .exd files from the disastrous Dec Microsoft update, Well done Microsoft! reregistered the MSCOMCTL.OCX and FM20.DLL planted the.xlsm file in a trusted
location checked all the Macro and ActiveX settings and tried to load the file. The file loads but I now get "Runtime Error 32809" it cant recognise 3 pages out of the has 19 pages it has. At any reference to one
of these 3 pages and it crashes.
I have been through "Compile Error" "Object does not exist on this machine" "Can't exit design mode" "Hidden file in Module" "Cant create ButtonX" "Unexpected Error 32809" and finally I am almost
there but "Runtime Error 32809" have tried 3 versions of Office and now totally frustrated and have no more hair left to pull out. Well done Microsoft you are too busy writing new operating systems to dump on us every two years which no
doubt will also not be compatible even with itself please fix the issues we are currently burdened with and I would like a refund for the Office 2013 which is not compatible with your flagship Windows8.
Any help would be greatly appreciated.

confidential clients information in the content.
Make a copy of your file, select the cells with the informations and run the macro below.
Andreas.
Sub SelectionToRandomData()
Dim R As Range, All As Range
Dim S As String, Digit As String
Dim d As Double, i As Long
If Not TypeOf Selection Is Range Then
MsgBox "Select some cells to randomize and try again", vbInformation
Exit Sub
End If
Set All = Intersect(ActiveSheet.UsedRange, Selection)
If All Is Nothing Then
MsgBox "No data inside the select cells", vbInformation
Exit Sub
End If
For Each R In All
If R.HasFormula Then GoTo Skip
If IsEmpty(R) Then GoTo Skip
S = R.Value
If IsDate(S) Then
If R.Value < 1 Then
R.Value = Rnd
ElseIf Int(R.Value) = R.Value Then
R.Value = Round(R.Value + 365 * (Rnd - 0.5), 0)
Else
R.Value = R.Value + 365 * (Rnd - 0.5)
End If
ElseIf IsNumeric(S) Then
For i = 1 To Len(S)
Digit = Mid$(S, i, 1)
If Digit Like "#" Then Mid$(S, i, 1) = Chr(48 + Rnd * 9)
Next
R.Value = CDbl(S)
Else
For i = 1 To Len(S)
Mid$(S, i, 1) = Chr(IIf(Rnd > 0.5, 65, 97) + Rnd * 26)
Next
R.Value = S
End If
Skip:
Next
End Sub

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

Microsoft Outlook 2007 send/receive error with windows 8.1

I do have an IDEAPAD LENOVO with windows 8.1
Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
Someone in the community know how I can fix it.
Thank you,
Moky

Hi,
What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
http://support.microsoft.com/kb/813514/en-us
Hope it helps.
Regards,
Steve Fan
TechNet Community Support

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Exchange 2007 mail account sync with Mail 4.0 does not happen

I am setting up my work exchange 2007 mail account in Mail 4.4. The total size of mail box is ~ 200MB. Folders smaller than 10MB have synced properly and I can see the mails in these folders inside Mail.
However, none of the mails inside folders >10MB are visible in Mail. Activity window in Mail does not indicate that a sync is going on. But I can see that Mail has correctly calculated the folder sizes on server and no. of messages on server (for every folder) in Account Info.
I have waited close to 5hrs hoping that it is probably a slow first time sync, but I am not closer to seeing the mails in Mail.
Any leads to solving this would help.
Thanks

I was having this problem as well with a different host's email account. I was able to get IMAP as an option by holding down the Option key. But then was unable to connect to the server to send/receive mail. Turning off SSL in two places worked:
- Uncheck SSL from the SMTP server settings (click on the SMTP server name & select "Edit SMTP Server List to get to this setting); and
- From the Advanced Options Tab. Also, in Advanced Options, you may need to change the port to 143 (it may be defaulted to 993 since SSL is the default.)

Hyper-V on Windows 2008R2 Running Windows 8.1 and Windows Phone

I am a lone wolf developer running Hyper-V on a legally-licensed Server running Windows Enterprise 2008R2. I have extremely limited research funding.
Since I need to evaluate Windows 8.1 and Windows Phone development for the 1080p Phone Emulator, I created a Virtual Machine of Windows 8.1 Evaluation Copy RTM on my server. I am trying to create software for the Nokia Lumia 1520 Phone-Tablet.
Everything in the Windows 8.1 Virtual Machine runs perfectly from Hyper-V on Windows 2008R2, except for one problem related to my Phone development project. Networking is perfect, the display is perfect, there are no other issues except this "gotcha".
The problem appears with the Windows Phone SDK Update 4, which supports a 1080p
Windows Phone Emulator. This emulator is supposed to load it's own instance of a Windows 8.1 Hyper-V virtual machine
when debugging the Phone Application from Visual Studio 2012 Express.
This Emulator tries to start it's own Hyper-V session inside Windows 8.1. In my humble opinion, it should be possible to do this (load a Windows 8.1 HyperV Virtual Machine inside a "parent" Virtual Machine).
It presents this error message instead:
Essentially, Windows 8.1, running in a Virtual Machine, should also be able to create a Virtual Machine inside it's own Virtual Machine. That is the required design of the Phone Emulator (must be able to intantiate a Windows 8.1 Hyper-V Virtual machine to display
the Phone).
If that does not work, then I guess it must not be a supported configuration. If not, then I need to licence Windows 8.1 on a separate physical computer. Anyone want to tackle this?
+__+

I have a legal, licensed Windows 2008 R2 Server with the Hyper-V Role. I then downloaded the time-limited
Windows 8.1 RTM Evaluation Version and successfully installed. It works flawlessly. Next, I installed the
Windows Phone SDK Update 4 on top of
Visual Studio Express 2012 for Windows Phone.
It all works flawlessly, except for one little problem.
Since I am interested in evaluating and testing the Windows Phone SDK 1080p Emulator, I must run
F5 - Start Debugging in Visual Studio in order to see my Windows Phone application in 1080p resolution. Well, the Emulator
almost completely starts up successfully, but at the last push it gives an error. This error is shown below as a JPEG.
Does anyone know which of the "Hyper-V components is not running?"
+__+

Can't dual boot windows 7 with windows 8 on Thinkpad edge S430

I am desperately trying to install windows 7 from USB.
I need it to dual boot with windows 8.
I obtained a windows 7 iso from MSDNAA: (en_windows_7_professional_with_sp1_x64_dvd_u_676939.iso)
I made a bootable UEFI USB with rufus on a Sandisk U3 Cruzer (8GB)
Now in BIOS I disabled secure boot but I can't select my USB, I can select it, press enter, the screen flickers but jumps back to the first entry in the boot list.
The USB is displayed without "UEFI:" in front.
Selecting "legacy" in boot mode works but I can't install windows 7, the setup shows al the partitions but says: "Windows cannot be installed to this disk. The selected disk is not of the GPT partition style".
That's it, I just can't install windows 7...
Solved!
Go to Solution.

Ok got it working:
a U3 Cruzer is NOT a good bootable USB!
csm should be enabled in BIOS.
secure boot should be DISABLED in BIOS.
(My problem was csm and the bad USB)

Fastest way to install windows 8 with windows 7 or vice versa

Hi
How much time did it take for you install windows 8 on your pc as a dual boot? It took me 5m56s!!!
The only difference between you all and me would be the method via which we installed. This method does requires legal windows 8 copy or the one which you re installing. This process is far better than installing by booting from cd.
In this method, we use the install.wim of windows installation to install windows. I found this because i was actually preparing for a project on wim images on school. Basically, windows installer also uses the install.wim file to install windows. It was first introduced in windows vista i believe and from then, the trend continued. WIM stands for Windows Imaging Format. . These images are also used in one key recovery for the factory backup. These images can be managed by dism comand line and imagex tool
I know that i have been dragging it for a bit long, so lets start then. It can be done by two programs, gimagex or imagex. The differnce between the two is that imagex works on command line only but the gimagex is like an imagex with user interface-much easier. So, we would use gimagex here, download from below
http://www.autoitscript.com/site/autoit-tools/gimagex/
So lets move into the steps
Insert the windows 8/windows 7 dvd or mount the respective iso.
Clear a partition for the new os
Run gimagex, go to the info tab. Select the image file there. Navigate to the setup directory and enter the soruces folder. Then select the install.wim file and then pressget info. It would display the os version it has. See the index number after the title of the version name.
Select the source first. The source is the install.wim image. Navigate to the setup directory and enter the soruces folder. Then select the install.wim file.
Now select the destination. Select the drive which you cleaned for the installation of the os. Then choose the index number of the os version you want to install.
Click apply and then it would be a matter of 5-6 minutes.
After the process is finished, dont reboot. Now, you have to install Easy Bcd since the windows 8 installation wont be registered in the bot configuration data. Download from here. Just download the non-commercial free copy of the software. Instal it and then run. Go to add new entry, select windows 8/7 and name it as windows 8 and lastly select the drive leter in the drive it was installed and press add entry.
Now it is the time to reboot. You would see windows 8 in the boot menu. Boot into it.
Setup windows 8 and download the drivers from here before hand.
With the help of this, you will be able to easily dual boot windows 8 and windows 7 without messing up anything. This is by far the easiest and fasted method to install windows i have witnessed till now
If you want to clean( only kep one os) install, you will have to use imagex in windows pe mode or in cmd in windows 8 install disk.
After these proesses, i cannot assure if one key reocvery would work, so make backup before hand.
And if you have any questions, feel free to ask
Hope this helps
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Btw, is it possible this becomed a sticky thread?
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Exchange 2007 Active Sync Issue with 1 users mailbox

Good Afternoon,
Server OS: Small Business Server 2008
Exchange: 2007 Standard - Update Rollup 13 SP3
Mobile phone: Blackberry Z10
We are in the process of decommissioning our Blackberry Enterprise Server, and down to one user. I am able to setup Exchange on his new non BES server tied phone, but it will not sync any email, all Meetings, and only some contacts. I have tried
adding this account to an Android phone with the same results. I have numerous times went into EMC and delete the Mobile device, when re-adding the account, everything seems to point to his exchange account being the culprit. I am getting the below
Active Sync error after adding his account. I have Bing / Googled around, and nothing of substance I have found. Thank you in advance!
Log Name: Application
Source: MSExchange ActiveSync
Date: 3/24/2015 2:01:15 PM
Event ID: 1008
Task Category: Requests
Level: Warning
Keywords: Classic
User: N/A
Computer: SISBS.internaldomain.local
Description:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ActiveSync" />
<EventID Qualifiers="32772">1008</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-24T19:01:15.000Z" />
<EventRecordID>4756229</EventRecordID>
<Channel>Application</Channel>
<Computer>SISBS.internaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>/Microsoft-Server-ActiveSync/default.eas?Cmd=FolderSync&DeviceType=BlackBerry&User=bbevers&DeviceId=BB3359D356</Data>
<Data>--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message:
Exception level: 0
HttpStatusCode: 200
AirSyncStatusCode: 6
XmlResponse:
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<Status>6</Status>
</FolderSync>
Exception stack trace: at Microsoft.Exchange.AirSync.FolderCommand.Execute()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
Inner exception follows...
Exception type: Microsoft.Exchange.Data.Storage.FolderSaveException
Exception message: Unable to save sync state folder Root due to PartiallySucceeded, Property = [0x7c020102] SyncCustomState, PropertyErrorCode = MapiCallFailed, PropertyErrorCode = Properties could not be set.
Exception = Microsoft.Exchange.Data.Storage.AccessDeniedException: Cannot set properties. ---> Microsoft.Mapi.MapiExceptionNoAccess: MapiExceptionNoAccess: Unable to set properties on object. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=7783]
Lid: 27161 EcDoRpcExt2 returned [ec=0x0][length=88][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 17082 ROP Error: 0x80070005
Lid: 30561
Lid: 21921 StoreEc: 0x80070005
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSetProps [10]
Lid: 4559 StoreEc: 0x80070005
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070005
Lid: 25761
Lid: 1940 StoreEc: 0x80070005
Lid: 25297
Lid: 21201 StoreEc: 0x80070005
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Object objLastErrorInfo)
at Microsoft.Mapi.MapiProp.SetProps(PropValue[] pva)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.<SetProperties>b__3(PropValue[] propValues)
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.InternalSetProperties(PropertyDefinition[] propertyDefinitions, Object[] propertyValues, MapiSetProps mapiSetProps)
at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.FlushSetProperties()
at Microsoft.Exchange.Data.Storage.FolderPropertyBag.SaveFolderPropertyBag(Boolean needVersionCheck)..
Exception level: 1
Exception stack trace: at Microsoft.Exchange.Data.Storage.FolderSaveResult.ToException(String exceptionMessage)
at Microsoft.Exchange.Data.Storage.SyncState.Commit(PropertyDefinition[] properties, Object[] values, Int32[] sizes)
at Microsoft.Exchange.AirSync.FolderCommand.Execute()
--- Exception end ---</Data>
</EventData>
</Event>

Hello,
Yes, it means the mailbox is corrupted. The most efficeint way is to rebuild the user's mailbox.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Dual boot on K410 window 8 with window XP pro

Recently I had purchased K410-i7 window 8 x64 and want to make dual boot with window XP 64 pro.
Would you please teach me how to do or if someone can do for me, I can pay service?
I live in Cupertino, CA. Thanks in advance.

with my little experience i find solaris 10 isn't able to install on sata hdd but with solaris express edition 5.11 i was able to install it on my lap top toshiba tecra and now i can boot with xp sp2 and solaris i hope this answer your question .

Exchange 2007 on Windows 2008R2 with Windows 2012 DC

Similar Messages

Maybe you are looking for