Exchange 2007 - restored (merged) Mailboxes - Problem with items in Outlook

Hey guys,
last week we had to restore and merge our Exchange Mailbox Database. We had a running Database with data until Oct 14 and merged a recent backup into the User Mailboxes.
Some mailboxes didn´t have problems, others have from then on doublicated Mails, Calendar Items, Tasks, ... even deleted/renamed folders appear now again WITH email content.
I don´t understand what happend there and if I can do something.
Hope someone could help me!
Regards

Hi,
According your post, I understand that some mailbox contain duplicate items after restore and merge mailbox.
If I misunderstand your concern, please do not hesitate to let me know.
Are you run Restore-Mailbox with AllowDuplicates parameter? Please double check in OWA.
Besides, please run below command to check the structure of mailbox folder:
MailboxFolderStatistics “identity” | Select Name,FolderSize,FolderAndSubfolderSize
If the issue only occur on Outlook client side, please run Outlook with online mode or reconfigure a new profile for testing.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Similar Messages

How to restore single mailbox (Inbox & Sent Items) using symatec backup 2010R3

Dear all,
I am using symatec bakcup exec 2010. iam trying to resotre mailbox for one of my user. I have full backup and i can able to see the user mailbox. My question is "If i start restore the emails (inbox & Sent itmes) will it be create any issue at my
live environment (Exchange server) . Backup exec is installed in exchange server2010 only. When i started restore its restoring full database (around 35GB). i am doing this first time in live environment. Kindly help me.
Thank you.
Karan

Hi Karan,
Based on my knowledge, Backup Exec offers 2 ways to restore Exchange data.
1. Using Mailbox database restore.
2. Restore individual mailbox or mail items from the backup set.
Besides, I'm not familiar with the third-party software Backup Exec. I recommend you ask more assistance about Symantec Backup Exec from Backup Exec vendor.
What's more, we can use DPM to restore individual mailbox.
Here is an article for your reference.
How to protect Exchange with DPM 2010 whitepaper
http://www.microsoft.com/en-us/download/details.aspx?id=8068
Hope it helps.
If there are any problems with Exchange, welcome to our Exchange forum.
Best regards,
Amy
Amy Wang
TechNet Community Support

Problem with Item Validation

Hello,
I am running an advanced tutorial: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/issue_track_ui.htm#BGBJCGIC
and I have a problem with item Validation.
Tutorial offers the following:
You must manually create another validation to ensure that the Actual End Date is the same or later then the Start Date.
To add a validation for the Actual End Date:
1.Under Page Processing, Validations, click the Create icon.
2.For Level, accept the default, Item level validation, and click Next.
3.For Item, select Project Details: 50.P3_ACTUAL_END_DATE (Actual End Date) and click Next.
4.For Validation Method:
a.Select PL/SQL and click Next.
b.Accept the default, PL/SQL Expression and click Next.
5.For Sequence and Name:
a.Sequence - Enter 50.
b.Validation Name - Enter P3_END_AFTER_START.
c.Accept the remaining defaults and click Next.
6.For Validation:
a.Validation - Enter:
to_date(:P3_ACTUAL_END_DATE,:APP_DATE_FORMAT) >= to_date
(:P3_START_DATE,:APP_DATE_FORMAT)
b.Error Message - Enter:
Actual End Date must be same or after Start Date.
c.Click Next.
7.For Conditions:
a.Condition Type - Select Value of Item in Expression 1 is NOT NULL
b.Expression 1 - Enter P3_ACTUAL_END_DATE
8.Click Create.
Is there a mistake in explanation? I did it 3 times already, very carefully! I ran the page, entered the date, which is After the Start date, and get the error message: Actual End Date must be same or After Start Date!!
Thank you for your consideration...

I got it solved. I don't know if this is documented(or a bug) but what I did was declare an exception and then raise it and put the form_trigger_failure into the exception handler rather than raise form_trigger_failure in the body.
declare
alreadyExists exception;
begin
-- select .....
raise alreadyExists;
exception
when alreadyExists then
message('.....exists');
raise form_trigger_failure
end;

Exchange 2007 and 2013 coexistance Problem

We are in the process to migrate our current Exchange 2007 to Exchange 2013.
Our environment is as follows:
HT01= Hub CAS Server (Exchange 2007)
MB1, MB2 = Mailbox CCR Cluster (Exchange 2007)
CAS1= CAS Server (Exchange 2013)
MBNew1, MBNew2 = Mailbox Servers (Exchange 2013)
Emails for users that are on Exchange 2007 can send and receive external emails. But they cannot send emails to users that are on Exchange 2013.
Users on Exchange 2013 can send/receive externally, send to Exchange 2007 users, but cannot receive emails from Exchange 2007 Users.

Are you getting any NDR? Post it.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Outlook 2013 with Exchange 2007 - out of office problem

We are using outlook 2013 with Exchange 2007. When users select their out of office it will work fine for the first day, however there after the Out of Office replies stop working. Out of Office is set correctly within Outlook, but what we have found
is that if the user opens Outlook the Out of Office starts to work again. Also when the user opens Outlook it takes around two minutes before it registers that Out of Office is on.
Any Ideas?

Hi,
How do you configure your OOF? From standard OOF wizard or define an automatic reply template from Rule wizard?
If you are using a template, Outlook must be running for the Rules Wizard to automatically reply. Please refer to the Note in the following KB:
http://support.microsoft.com/kb/311107
If it is configured by using standard Out of Office assistance in File > Automatic Replies, please remove OOF settings in Outlook and set it from OWA 2007, then check whether the issue can be reproduced.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2007 servers reports mailbox size full, but mailbox shows empty in OWA or Outlook.

When the users log into their mailboxes in OWA or Outlook get this warning: "You have exceeded your limit quota and can not send or receive mail" but really they have the mailbox empty, there's nothing in calendar, folders or deleted items.
I ran this command Get-MailboxStatistics and the mailbox reports for example 500 MB.
I deleted the deleted items and I configured deleted items retention to 0 days to ensure that it wasn't the problem, but the servers still reporting the same mailbox size (500 MB).
This happen to some mailboxes, not all
Please help, what can I do?

1. How many Exchange 2007 servers do you have?
2. What service pack and rollups are installed on the Exchange 2007 server(s)?
3. If you have more than one server, are you using any form of replication: LCR, SCR, CCR... etc. ?
4. What 3rd party software is installed on the Exchange 2007 server(s)? For example, antivirus, archiving, etc.
5. Can you confirm that this happens in OWA as well? I see you mentioned OWA but I've just glanced at another problem with incorrect folder size being indicated in Outlook and it apparently had to do with the .OST file. Of course, if the problem occurs with
OWA as well, then the OST file would not come into play. Sorry to insist on that but I'm trying to rule some things out, if possible (like 3rd party apps, maybe something with replication, maybe a problem that was corrected in a service pack or rollup).
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2013 - Public Folder Mailbox and Single Item Recovery

Hello,
I recently had a request to recover some messages that an ex-employee deleted from the "recover deleted items" folder in their public folder. Since this resides on a public folder mailbox and it does have the option for
"Single Item Recovery" to be enabled on the box (which I enabled not knowing if this really works or not), is there a way I can still recovery these items or do I have to go to a backup to obtain those messages. Since ExFolders does not work that
is not an option. I've seen commands to restore a public folder that was deleted but not items that were deleted directly from a public folder. I checked using MFCMAPI and I do see the dumper root and the public folder dumpster for each folder but it
looks to be only the "deletions" folder and don't see anything similar to a "purges" type folder. Any ideas or am I stuck recovering from backup? Thanks in advance!

So I think you are stuck and will need to restore the EDB to a Recovery Database to restore the items because when the end user purged the items from the "Recover Deleted Items" it removes them from the Recoverable Items/Deletions folder.
Check out this article
http://blogs.technet.com/b/exchange/archive/2013/08/23/recovering-public-folder-information-in-exchange-2013.aspx
I have not played with the recoverable items settings on the 2013 public folder enabled mailbox EDB but you might try checking out Litigation or In Place Hold to use as a safety mechanism moving forward. That said this will also increase the
DB size so consider all the options before implementing
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

We have a user that was complaining about not being in the address book anymore. After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too. As far as I know, she is the only user
having this problem.
She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff. At her computer, I tried repairing her email (under account settings) but the process would fail when
searching for her settings. I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
Configuration -> Disconnected Mailbox.
Some info on our setup:
Exchange 2007 on Windows Server 2003r2
AD is on Windows Server 2008r2
Her computer is running Outlook 2010
I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed. She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

First things first - is her mailbox hidden from address lists? Run
Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out. It probably isn't, but we need to clear this, just in case.
Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory? Often, when the name on a mailbox is changed, the display name is not - and vice versa. Also, has her email address also changed?
If so, has a secondary proxy address been added to reflect her maiden name? I'd do this, just to be sure things aren't lost that should be delivered to her.
I can't think of anything else obvious right now. After you've checked these things, get back to us with their results.

Unable to access public folders on Exchange 2007 when user mailbox is on Exchange 2013

Hi
I have coexistence with Exchange 2007 and Exchange 2013. I've moved a mailbox to Exchange 2013 and now cannot view the public folders on Exchange 2007. The error message I get is "could not connect to the public folder server. microsoft exchange is
not available. either there are network problems or the exchange server is down for maintenance."
Mailboxes on Exchange 2007 do not have any problems viewing public folders. I can't migrate users to Exchange 2013 until this issue is resolved.
The IIS permissions to the Public virtual directory on Exchange 2007 is set to Intergrated Windows and Basic authentication.

Hi northerly,
I recommend you follow the steps below for troubleshooting:
1. Please run the Get-OutlookAnywhere cmdlet to verify the Outlook Anywhere settings on Exchange Server 2013 Client Access servers.
2. If "ExternalHostName" is set, and "ExternalClientAuthenticationMethod" is Negotiate, change "ExternalClientAuthenticationMethod" to something other than Negotiate.
3. If "InternaClientlAuthenticationMethod" is set to Negotiate, and "InternalRequireSSL" is True, change "InternalClientAuthenticationMethod" to something other than Negotiate, or change "InternalRequireSSL" to False.
What's more, here is a helpful KB for your reference.
Users of Exchange Server 2013 or Exchange Online can't open public folders or shared mailboxes on an Exchange 2010 or Exchange 2007 server
http://support.microsoft.com/kb/2834139/en-us
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

OWA still redirects to Exchange 2007 (legacy) after mailbox-move to Exchange 2013

Hi,
I am in the process of implementing Exchange 2013 in coex with 2007. I am testing now in a copy of the production environment and have installed the Exchange 2007 SP3 RU11 prior to installing Exchange 2013 using the SP1 media.
We use a wildcard certificate and I prepared the Exchange 2007 internal/external URLs for OWA/OAB/etc to use the legacy.domain.com names and in Exchange 2013 I set them all to email.domain.com. Exchange 2013 has Outlook Anywhere configured.
All tests like autodiscover (internally via SCP) run fine and for a new Exchange 2013 mailbox the Outlook and OWA functionality is as expected. A mailbox still on 2007 also connects fine via Outlook and while connecting to OWA (using the htps://email.domain.com/owa
url) also redirects me to https://legacy.domain.com/owa just fine.
HOWEVER: after a successfull mailbox-move from 2007 to 2013 my OWA logon-request STILL get's redirected to the 2007 legacy URL. When I then logon again on the 2007 OWA I get the message that I should connect to the 2013 URL and end-up in a loop.
Anyone any tips where to search?
Many thanks in advance.
Best regards and many thanks in advance, Eric Vegter

This seems to be an outstanding issue.
We just performed a fresh install of Exchange 2013 on a Windows Server 2012 R2 operating system. We're migrating from our existing Exchange 2007 server. At the moment we have everything properly setup in a co-existence state. All we lack is to complete the
migration of our mailboxes from the 2007 DB to the 2013 DB.
In performing the first mailbox move, to test the migration process and make certain mail flows as expected, we noticed this same problem. Before reading through this thread, I was able to assign Full Access to a delegate user and then perform the "Open
Mailbox" feature from a 2013 user's account. This was successful in opening the mailbox within OWA 2013. However, I still could not access the account by simply logging into the Outlook Web App. It would login, then proxy back to OWA 2007 with the message,
"Use the following link to open this mailbox with optimal performance:
http://mail.domainname.com/"
After reading about cycling the OWA app pool, I immediately tried it as a workaround and it worked. It is a little frustrating going about it in this way. Hoping to see more activity on this thread.
-Lorne

Exchange 2007 Restore

Hello Everybody,
I am trying to restore Exchange 2007 database. I tried to do the soft recovery since my database was in the dirty shutdown and it ran very well since I had all the required logs but still
it is in dirty shut down. Please check below
C:\>eseutil /r E02 /l "i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage" /s "i:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Stor
age" /d "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Storage\Man
agers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating RECOVERY mode...
Logfile base name: E02
Log files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
System files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
Database Directory: h:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage\Managers Database.edb
Performing soft recovery...
Restore Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
Operation completed successfully in 2.343 seconds.
C:\>eseutil /mh "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Sto
rage\Managers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers S
torage\Managers Database.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:02/21/2012 15:01:30 Rand:683474569 Computer:
cbDbPage: 8192
dbtime: 401104910 (0x17e8600e)
State: Dirty Shutdown
Log Required: 355061-355072 (0x56af5-0x56b00)
Log Committed: 0-355073 (0x0-0x56b01)
Streaming File: No
Shadowed: Yes
Last Objid: 39159
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 0
Repair Date: 00/00/1900 00:00:00
Old Repair Count: 0
Last Consistent: (0x5432B,74E,DD) 01/20/2015 18:23:22
Last Attach: (0x5432D,9,86) 01/20/2015 18:27:32
Last Detach: (0x0,0,0) 00/00/1900 00:00:00
Dbid: 1
Log Signature: Create time:02/21/2012 15:01:29 Rand:683467044 Computer:
OS Version: (5.2.3790 SP 2)
Previous Full Backup:
Log Gen: 354267-354281 (0x567db-0x567e9) - OSSnapshot
Mark: (0x567EA,8,16)
http://www.arabitpro.com

Yes I have read that and tried but no luck. Check the below command its without .edb
C:\>eseutil /r E02 /l "i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage" /s "i:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Stor
age" /d "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Storage\Man
agers"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating RECOVERY mode...
Logfile base name: E02
Log files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
System files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
Database Directory: h:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage\Managers
Performing soft recovery...
Restore Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
Operation completed successfully in 3.406 seconds.
C:\>eseutil /mh "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Sto
rage\Managers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers S
torage\Managers Database.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:02/21/2012 15:01:30 Rand:683474569 Computer:
cbDbPage: 8192
dbtime: 401104910 (0x17e8600e)
State: Dirty Shutdown
Log Required: 355061-355072 (0x56af5-0x56b00)
Log Committed: 0-355073 (0x0-0x56b01)
Streaming File: No
Shadowed: Yes
Last Objid: 39159
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 0
Repair Date: 00/00/1900 00:00:00
Old Repair Count: 0
Last Consistent: (0x5432B,74E,DD) 01/20/2015 18:23:22
Last Attach: (0x5432D,9,86) 01/20/2015 18:27:32
Last Detach: (0x0,0,0) 00/00/1900 00:00:00
Dbid: 1
Log Signature: Create time:02/21/2012 15:01:29 Rand:683467044 Computer:
OS Version: (5.2.3790 SP 2)
Previous Full Backup:
Log Gen: 354267-354281 (0x567db-0x567e9) - OSSnapshot
Mark: (0x567EA,8,16)
Mark: 02/08/2015 00:29:06
Previous Incremental Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Copy Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Differential Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Shadow copy backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
cpgUpgrade55Format: 0
cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
ECC Fix Success Count: none
Old ECC Fix Success Count: none
ECC Fix Error Count: none
Old ECC Fix Error Count: none
Bad Checksum Error Count: none
Old bad Checksum Error Count: none
Operation completed successfully in 0.985 seconds.
http://www.arabitpro.com

RSG Exchange 2007 Restore error

I have Exchange 2007 and was able to restore my database to a RSG to restore a users mailbox. This user left a few months ago and no longer has an AD account or mailbox. It has been more then 30 days so her mailbox is deleted. When I run the powershell command
to restore.
Restore-Mailbox -Identity <Username> -RSGDatabase <databasename>
I get the error that the specified mailbox "guid" does not exist on database <RSGDatabase>
I've checked the RSG database and the user is in it. How do I restore this user
I've created a new AD and Mailbox for the user

I would suggest using one of your backups and creating a recovery database and pulling the users mailbox from that recovery database.
http://www.msexchange.org/articles-tutorials/exchange-server-2007/high-availability-recovery/Working-Recovery-Storage-Groups-Exchange-2007.html

Problem with item and/or data during page-processing-PS/SQL

Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobi

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Problem with item of type DB column, reinitialized in a process

Hello,
I have a problem with an item P216_username with source type=database column(empty in this case). In a process On Load-After Header(with a sequence number bigger then the Fetch Row sequence number) , I change the value of this item:
:P216_USERNAME := 'custom_value';
When I run the page, I see the item P216_USERNAME with the value from the database column(empty), instead of attributed value from the process('custom_value').
Here is a copy of the page in a debug mode:
0.00: Session: Fetch session header information
0.00: ...Metadata: Fetch page attributes for application 107, page 216
0.00: Fetch session state from database
0.00: Branch point: BEFORE_HEADER
0.00: Fetch application meta data
0.01: Computation point: BEFORE_HEADER
0.01: Processing point: BEFORE_HEADER
0.01: Show page template header
0.01: Computation point: AFTER_HEADER
0.01: Processing point: AFTER_HEADER
0.01: ...Process "Fetch Row from CONSULTANT_ALLOCATION_PERIODS": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:CONSULTANT_ALLOCATION_PERIODS:P216_ALLOCATION_PERIOD_ID:ALLOCATION_PERIOD_ID
0.01: ...Process "Initialize Username": PLSQL (AFTER_HEADER) begin :P216_USERNAME := 'custom_value'; htp.p(:P216_USERNAME); end;
custom_value PrintLogout
0.01: Computation point: BEFORE_BOX_BODY
0.01: Processing point: BEFORE_BOX_BODY
0.01: Region: Edit Allocation Period
Edit Allocation Period Cancel
Create
0.02: Item: P216_ALLOCATION_PERIOD_ID HIDDEN
0.02: Item: P216_USERNAME TEXT
Username
0.02: Item: P216_START_DATE PICK_DATE_MM_DD_YYYY
Start Date
0.02: Item: P216_END_DATE PICK_DATE_MM_DD_YYYY
End Date
0.02: Item: P216_COMMENTS TEXTAREA
Comments
custom_value ''
0.02: Computation point: AFTER_BOX_BODY
0.02: Processing point: AFTER_BOX_BODY
0.02: Computation point: BEFORE_FOOTER
0.02: Processing point: BEFORE_FOOTER
0.02: Show page tempate footer
If you had this problem, or you know where it comes from, please answer.
Thank you.

Hi,
Tomáš : I noticed that if i change the Source Used to 'Only when current value in session state is null' it works but I dont think its a normal behaviour.
Scott: Thanks, it's working now with the post computation callculation attribute.
Thanx for answers,
Vastiana

Problems with Item level access rights

I am having problems with a page group I created. I have applied item level security to an item on a page, managed by me and viewable by one access group. I then created multiple users and signed in as one user who was not in the access group to see that item. When I navigated to that page, I could see the item. When I restricted access to the tab on the page, I could not see the tab, so that worked. But when I opened access to the tab, I could still see the item.
Here are my settings:
Page Group Properties: Display Page To Public Users checked and Enable Item Level Security checked.
Page Properties: Display Page To Public Users checked and Enable Item Level Security checked.
Tab Properties: Specify Access Settings checked and added all of the appropriate groups with view access.
Text Item Properties: Define Item Level Access Privileges and managed by me and viewable by one access group.

I am having problems with a page group I created. I have applied item level security to an item on a page, managed by me and viewable by one access group. I then created multiple users and signed in as one user who was not in the access group to see that item. When I navigated to that page, I could see the item. When I restricted access to the tab on the page, I could not see the tab, so that worked. But when I opened access to the tab, I could still see the item.
Here are my settings:
Page Group Properties: Display Page To Public Users checked and Enable Item Level Security checked.
Page Properties: Display Page To Public Users checked and Enable Item Level Security checked.
Tab Properties: Specify Access Settings checked and added all of the appropriate groups with view access.
Text Item Properties: Define Item Level Access Privileges and managed by me and viewable by one access group.

Exchange 2007 - restored (merged) Mailboxes - Problem with items in Outlook

Similar Messages

Maybe you are looking for