Exchange 2007 (sbs) export maiol contacts and distrubution lists an import in to Exchange 2010 (sbs)
Hello, I have a server running SBS2008 with exchange 2007.
I need to export all Mail Contacts, only need to export Dispaly Name, Alias and External email address.
I then need to import them into my new server running exchange 2010
Then i need to to dthe same with the distrubuition lists and add the contacts inoot the relavant groups.
Does anybody know if this is possible please, if so can anybody help me?
Hi
Perhaps you can export to a csv and then import from the .csv in exchange 2010?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
Good Day ,
Just one question I did migration from exchange 2003 to exchange 2010 I moved mailbox about Contact and distrubution list
is moved automaticly I don't need to do somthing .
Regards
eYou need to upgrade the Distribution list.
Set-DistributionGroup <DL name> -Forceupgrade
The ForceUpgrade parameter suppresses the following confirmation: "To save changes on object <object name>, the object must be upgraded to the current Exchange version. After the upgrade, this object can't be managed by an earlier
version of the Exchange Management Tools. Do you want to continue to upgrade and save the object?" This confirmation occurs when you upgrade a distribution group that was created in Microsoft Exchange Server 2003. You can't manage an Exchange 2003 distribution
group by using the Exchange Management Console until you update the object's version.
Taken from
http://technet.microsoft.com/en-us/library/bb124955(v=exchg.141).aspx
Same with Contacts as well
Set-MailContact <Contact name> -Forceupgrade
http://technet.microsoft.com/en-us/library/aa995950(v=exchg.141).aspx
Now, if you want to perform this on all the Distribution Groups and contacts, you can run the commandlet as below
Get-DistributionGroup -ResultSize Unlimited | Set-DistributionGroup -ForceUpgrade
Get-Mailcontact -ResultSize Unlimited | Set-MailContact -ForceUpgrade -
How can I stop my iPhone from synching my contacts and groups lists twice?
How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.
Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.
-
Exchange 2007 : Users cannot add contact while using outlook anywhere
Hey guys, i have a client with Exchange 2007 (standalone), when a user is connected through Outlook Anywhere or Activesync and they try to save a contact they get a little popup saying exchange is unavailable, outlook needs to be connected.
Any ideas on these error?
Thanks in advance.Hi,
In client side which is using Outlook Anywhere, please disable using Exchange Cached mode and restart Outlook to use Online mode. Then check whether the error occurs or not when saving a contact. Also do the test in OWA from external internet environment.
If the issue doesn't happen in Outlook Online and OWA, please create a new Outlook profile for this Outlook Anywhere user.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter
We are upgrading from Exchange 2007 SP2 to SP3.
Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
DC is on windows 2008 Enterprise 32 bit OS - SP2
When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
[2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 1:12:38 PM] [0] End of Setup
[2/1/2015 1:12:38 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
[2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:53 PM] [0] **************
[2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server''
[2/1/2015 2:17:53 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [0] **************
[2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [0] **************
[2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:55 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [0] **************
[2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Ending processing.
[2/1/2015 2:19:07 PM] [1] Beginning processing.
[2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:07 PM] [1] Ending processing.
[2/1/2015 2:19:08 PM] [1] Ending processing.
[2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:19:20 PM] [0] **************
[2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
[2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''
[2/1/2015 2:19:20 PM] [1] Beginning processing.
[2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
[2/1/2015 2:19:20 PM] [1] The following roles are current:
[2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
[2/1/2015 2:19:26 PM] [1] Found 22 components
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
[2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
[2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/1/2015 2:19:32 PM] [2] Beginning processing.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/1/2015 2:19:35 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/1/2015 2:19:51 PM] [2] Process standard error:
[2/1/2015 2:19:51 PM] [2] Ending processing
[2/1/2015 2:20:07 PM] [2] Process standard error:
[2/1/2015 2:20:07 PM] [2] Ending processing.
[2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:07 PM] [2] Beginning processing.
[2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
[2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
All compilation targets are up to date.
[2/1/2015 2:20:10 PM] [2] Process standard error:
[2/1/2015 2:20:10 PM] [2] Ending processing.
[2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:10 PM] [2] Beginning processing.
[2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
[2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
All compilation targets are up to date.
[2/1/2015 2:20:12 PM] [2] Process standard error:
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
[2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
[2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
[2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
Appreciate if someone can help us move forward in this scenario.
We have
1. disabled anti virus and tried.
2. removed watermarks and action entries in the registry
3. tried almost everything mentioned on google but i am not able to move forward.
Please help. we need this as part of our migration to Exchange 2013 for co-existence.
Thank you.
PhilipExchangeSetup.log (part 3)
[2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
[2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/2/2015 8:06:45 PM] [2] Beginning processing.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:07:00 PM] [2] Ending processing.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/2/2015 8:07:00 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
[2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
All compilation targets are up to date. -
Exchange 2007 Search Export-Mailbox AND OPERATOR
I am looking to do a search for keywords using Export-Mailbox cmdlet. It seems like there is no way to do a AND search for two keywords (For example "BUDGET" AND "FINANCE").
It seems like the only way we could get partial results would be to put both the keywords in quotes as s ingle keyword with a space (for example "BUDGET FINANCE"). But this doesnt serve the purpose.
I have tried to use Outlook Instant Search / Search folders and OWA search but all yeild different results as it seems like the search function is not consistent across all these 3 features.
For example, the search folders it seems like do not search in the content (attachments) but Outlook online mode folder does / OWA does search etc. / I am not able to search in online folders using Outlok as this is a journal mailbox and has 500K messages
with managed folders and there does not seem to be a way to narrow down the saerch only in a specific folder and its subfolders.
Has any body else come across a situation to do a discovery for keywords with an AND operator ? Is there a way to do this using native tools?
TIA
PrakashSo, you want to do the phrase searching for “BUDGET FINANCE”, not the multiple keywords that spread in a mail?
Which cmdlet line do you use to perform the search?
“You can specify keywords and phrases to search message content. You can also use the logical operators AND, OR, and NOT”
----------Refer to <Exchange
2010: Understanding Multi-Mailbox Search>
James Luo
TechNet Subscriber Support (http://technet.microsoft.com/en-us/subscriptions/ms788697.aspx)
If you have any feedback on our support, please contact [email protected] -
Exchange 2007 cannot export pst files via its powershell
Hi,
I am trying to export pst files from Exchange server 2007.
This script used to work perfectly.
Export-Mailbox -Identity paddy -PSTFolderpath C:\pst\
But now I am getting an error message saying this
Export-Mailbox : The specified mailbox database "SRV03\First Storage Group\Mail
box Database" does not exist.
At line:1 char:15
+ Export-Mailbox <<<< -identity paddy -PSTFolderPath C:\pst\
MoveType : ExportToPST
MoveStage : Initialization
StartTime : 01/01/0001 12:00:00 AM
EndTime : 01/01/0001 12:00:00 AM
StatusCode : -2147467259
StatusMessage : The specified mailbox database "SRV03\First
Storage Group\Mailbox Database" does not exi
st.
ReportFile : C:\Program Files\Microsoft\Exchange Server\L
ogging\MigrationLogs\export-Mailbox20140527-
155543-8040336.xml
what would be the problem?
I checked that the account has full permission so permission would not be the issue.
ThanksHi,
First, please check if the mailbox database mentioned in the error message is mounted.
Besides, please check if you can export other mailbox using the Export-Mailbox cmdlet.
If all mailbox are affected, please check if you have the Exchange Server Administrator role assigned.
1. Open EMC.
2. Select the Organization Configuration node from the console tree.
3. Please check the permissions assigned in the result pane. If there is no the Exchange Server Administrator role, please add it to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2007 wont send to AOL and a few other domains
Have tried everything. We switched from Time Warner Cable, to AT&T firber optic, and now we cant send email to AOL, and a few other domains. rDNS is setup correctly, and still no go. Any help would be good.
Hi,
How about the internal communication?
Agree with both MAS and Rich, detailed errors will be helpful for the further troubleshooting.
Please use mxtoolbox to check blacklist.
Please check the Send Connector settings.
Thanks
Mavis Huang
TechNet Community Support -
How to export message body and data from Table to Excel from outlook 2010
I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line .
Dear Concerned,
The change in status of the following employee has been carried out as per following details:
New Status
Change in Job
Effective Date
01-Feb-2015
Employee Name
Ricky ponting
Employee Code
4982
Designation
Sourcing Executive (Secondment)
Job Group
1A
Department
Sourcing & Supply Chain
Unit
Technology Sourcing
Division
Finance
Location
sydney
Reporting Line
Mr Micheal king
Note: Ricky Ponting was previously working as
Tariff Implementation Support Officer XYZ organization was reporting to
Mr Robin Sing
I need working code that export about HTML table data as well last Note : full line so that I can have an excel file of 2000 Employees whoes status have been changed and I can easily sort out from which previous line they were reporting to new line and I
can get in touch with the new line for any Access rights re-authorization exercise on later stage .
Currently i am using following code thats working fine with the table extraction but NOTE: line is not being fetched with the following code based on following URL
https://techniclee.wordpress.com/2011/10/29/exporting-outlook-messages-to-excel/
Const MACRO_NAME = "Export Messages to Excel (Rev Sajjad)"
Private Sub ExportMessagesToExcel()
Dim olkFld As Outlook.MAPIFolder, _
olkMsg As Outlook.MailItem, _
excApp As Object, _
excWkb As Object, _
excWks As Object, _
arrCel As Variant, _
varCel As Variant, _
lngRow As Long, _
intPtr As Integer, _
intVer As Integer
Set olkFld = Session.PickFolder
If TypeName(olkFld) = "Nothing" Then
MsgBox "You did not select a folder. Operation cancelled.", vbCritical + vbOKOnly, MACRO_NAME
Else
intVer = GetOutlookVersion()
Set excApp = CreateObject("Excel.Application")
Set excWkb = excApp.Workbooks.Add
Set excWks = excWkb.Worksheets(1)
excApp.Visible = True
With excWks
.Cells(1, 1) = "Subject"
.Cells(1, 2) = "Received"
.Cells(1, 3) = "Sender"
.Cells(1, 4) = "New Status"
.Cells(1, 5) = "Effective Date"
.Cells(1, 6) = "Employee Name"
.Cells(1, 7) = "Employee Code"
.Cells(1, 8) = "Designation"
.Cells(1, 9) = "Job Group"
.Cells(1, 10) = "Department"
.Cells(1, 11) = "Unit"
.Cells(1, 12) = "Division"
.Cells(1, 13) = "Location"
.Cells(1, 14) = "Reporting Line"
.Cells(1, 15) = "Note:"
End With
lngRow = 2
For Each olkMsg In olkFld.Items
excWks.Cells(lngRow, 1) = olkMsg.Subject
excWks.Cells(lngRow, 2) = olkMsg.ReceivedTime
excWks.Cells(lngRow, 3) = GetSMTPAddress(olkMsg, intVer)
For intPtr = LBound(arrCel) To UBound(arrCel)
Select Case Trim(arrCel(intPtr))
Case "New Status"
excWks.Cells(lngRow, 4) = arrCel(intPtr + 1)
Case "Effective Date"
excWks.Cells(lngRow, 5) = arrCel(intPtr + 1)
Case "Employee Name"
excWks.Cells(lngRow, 6) = arrCel(intPtr + 1)
Case "Employee Code"
excWks.Cells(lngRow, 7) = arrCel(intPtr + 1)
Case "Designation"
excWks.Cells(lngRow, 8) = arrCel(intPtr + 1)
Case "Job Group"
excWks.Cells(lngRow, 9) = arrCel(intPtr + 1)
Case "Department"
excWks.Cells(lngRow, 10) = arrCel(intPtr + 1)
Case "Unit"
excWks.Cells(lngRow, 11) = arrCel(intPtr + 1)
Case "Division"
excWks.Cells(lngRow, 12) = arrCel(intPtr + 1)
Case "Location"
excWks.Cells(lngRow, 13) = arrCel(intPtr + 1)
Case "Reporting Line"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
Case "Note:"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
End Select
Next
lngRow = lngRow + 1
Next
excWks.Columns("A:W").AutoFit
excApp.Visible = True
Set excWks = Nothing
Set excWkb = Nothing
Set excApp = Nothing
End If
Set olkFld = Nothing
End Sub
Private Function GetSMTPAddress(Item As Outlook.MailItem, intOutlookVersion As Integer) As String
Dim olkSnd As Outlook.AddressEntry, olkEnt As Object
On Error Resume Next
Select Case intOutlookVersion
Case Is < 14
If Item.SenderEmailType = "EX" Then
GetSMTPAddress = SMTP2007(Item)
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
Case Else
Set olkSnd = Item.Sender
If olkSnd.AddressEntryUserType = olExchangeUserAddressEntry Then
Set olkEnt = olkSnd.GetExchangeUser
GetSMTPAddress = olkEnt.PrimarySmtpAddress
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
End Select
On Error GoTo 0
Set olkPrp = Nothing
Set olkSnd = Nothing
Set olkEnt = Nothing
End Function
Function GetOutlookVersion() As Integer
Dim arrVer As Variant
arrVer = Split(Outlook.Version, ".")
GetOutlookVersion = arrVer(0)
End Function
Function SMTP2007(olkMsg As Outlook.MailItem) As String
Dim olkPA As Outlook.PropertyAccessor
On Error Resume Next
Set olkPA = olkMsg.PropertyAccessor
SMTP2007 = olkPA.GetProperty("http://schemas.microsoft.com/mapi/proptag/0x5D01001E")
On Error GoTo 0
Set olkPA = Nothing
End Function
Sub DebugLabels()
Dim olkMsg As Outlook.MailItem, objFSO As Object, objFil As Object, strBuf As String, strPth As String, arrCel As Variant, intPtr As Integer
strPth = Environ("USERPROFILE") & "\Documents\Debugging.txt"
Set olkMsg = Application.ActiveExplorer.Selection(1)
arrCel = Split(GetCells(olkMsg.HTMLBody), Chr(255))
For intPtr = LBound(arrCel) To UBound(arrCel)
strBuf = strBuf & StrZero(intPtr, 2) & vbTab & "*" & arrCel(intPtr) & "*" & vbCrLf
Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFil = objFSO.CreateTextFile(strPth)
objFil.Write strBuf
objFil.Close
Set olkMsg = Application.CreateItem(olMailItem)
With olkMsg
.Recipients.Add "[email protected]"
.Subject = "Debugging Info"
.BodyFormat = olFormatPlain
.Body = "The debugging info for the selected message is attached. Please click Send to send this message to David."
.Attachments.Add strPth
.Display
End With
Set olkMsg = Nothing
Set objFSO = Nothing
Set objFil = Nothing
End Sub
Function StrZero(varNumber, intLength)
Dim intItemLength
If IsNumeric(varNumber) Then
intItemLength = Len(CStr(Int(varNumber)))
If intItemLength < intLength Then
StrZero = String(intLength - intItemLength, "0") & varNumber
Else
StrZero = varNumber
End If
Else
StrZero = varNumber
End If
End FunctionDear Graham
I am already big fan of yours and using mail to many Addin from years from word 2007 to Word 2010 :) and still loving it and I use it for access re-authorization from Lines for application accesses . I tried and finally got understanding of the Extract to
mail Addin and after tweaking excel - Text To columns and other few things finally i was able to get the required data - from morning to now :) I am happy to see your provided guidance
Thanks alot - by the way why your Mail to many add-in is so slow now these days :) previous versions usually help me send 1000 emails in 10 minutes now it takes long time :) -
I am 63 yrs old and not to computer literate. I know how to send an email to multiple people using my contact list and groups on my IMAC. I tried using a group name downloaded to my Ipad2 from my IMac. It does not work. If I choose a single email address it works. Any idea what I am doing wrong?
Thank you for your paitence and help.
SteveYou are not doing anything wrong. The feature that you need is totally lacking in the built in Mail app on the iPad.
There are a couple of third party mail apps that will let you do this ... MailShot and Group Email with Attachments. You can check them out in the App Store. -
IMovie won't export "missing media" and now won't import archived footage either?
Hello,
I made a movie in iMovie 10.0.3, and tried to export it to "file". It came up fine in the Theatre, but when I exported it to "file" a message about "missing media" came up, and when I tried to play it (tried to burn it to DVD), a further message about "quicktime not recognising the format" came up. It was saved as an mp4 file. I thought I would try and delete all the original footage and reimport it from the external HDD (where it was saved as archived footage), however when I plug the HDD in, the previously imported clips don't come up. I've emptied the trash to try and help (clutching at straws!), and was wondering if anyone could offer advice on how to a. export the movie successfully or b. reimport the clips so I can make the movie again (long and tedious, but possibly the only way?).
Thanks in advance.
ps this is my first time posting, so please be gentle with a newbie!Found the solution myself! All I needed to do was turn off the Time Machine. I have no idea why it does that. Finally, I can use iMovie again! Apple should really fix that though.
-
[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support -
Incorrect Legacyexchangedn is being stamped only on contact objects created on Exchange 2007
Environment
Exchange 2007- All mailboxes are hosted on Exchange 2007 servers.
Exchange 2000 - Only being used to relay emails, RUS is running on these servers.
Abnormality what i have noticed is that contact objects being created on exchange 2007 server are getting legacyexchangedn as "OU=itca" which is name of Exchange 2000 administrative group. Ideally, any objects created on Exchange 2007 should get
legacyexchangedn like "OU=Exchange administrative group (FYDI....)" .
This happens only with contacts. Legacyexchangedn on mailbox is getting stamped correctly.
I am trying to understand why contact objects are getting incorrect legacyexchangedn. Any help on this would be appreciated.Hi,
Can you change the OU when create contacts?
Please try below link to create contact, for your reference:
https://technet.microsoft.com/en-us/library/aa997220(v=exchg.80).aspx
Meanwhile, we can modify the default OU by AD. More details about Redirecting the users and computers containers in Active Directory domains, please refer to:
http://support.microsoft.com/kb/324949/en-us
Best Regards,
Allen Wang -
HT1386 Windows 8 Syncing Problem with Contacts and Calendars Office 2007 and iphone 4
I have a new Dell Inspiron 17R and just did a sync with my iphone 4. It wiped out my contact and calendar listing. I have selected the contacts and calenders sync option. It is almost like the sync process can not fine the pst file on this new Windows 8 computer.
For this particular issue, as suggested by yellowadept, go the the info tab at under the advanced section, choose replace contact information on iphone. This will over write any contact information on the iphone with what you have in address book on the computer.
However, if you are interested in what part of the 111 contacts will be changed, you could open address book first. Then highlight all your contacts and click on file>export>as vcard. Then you could back up all your contacts to your desktop. After you export all your contacts then you could sync the iphone and allow the changes to see what changes were made. If the iphone actually changed anything, then you could delete all your contacts in address book, then import the vcards back in.
Also, keeping a back-up of your contacts and calendars is a pretty good idea.
Hope this helps. -
How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system
Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the fieldDuplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here
Maybe you are looking for
-
Hello, My company has about 1500 employees. The purpose is to distribute our corporate application within their iPads. What are the possible legal ways to distribute?
-
Process Flow Transistion dissapears
Hello! Some of the created transitions are not created in the actual Process Flow. This is obvious when looking in the Process Monitor. When I redraw the one missing, deploy and execute the process flow again. I get more transitions but not all of th
-
WPFCrystal Report Viewer Localization
Hi , Working on a requirement to make localization for WPFCrystal Report Viewer , in that process refered SAP Crystal Reports .NET SDK Developer Guide and fallowed Configuring Multilingual Client Support Tutorial. My task is to localize WPFCrystalRep
-
I want to travel with my iphone in Europe using only ipod and wifi features. I do not want to receive any bills from ATT for phone useage or data, what is the best way to prevent this other than not making phone calls. thank you joanlvh
-
Yes, I got the stupid 1418 code. Help please
I got a 60GB Ipod photo I accidently unplugged my iPod while it had the "Do not disconnect" screen on. Now that I plug it into my computer it says something about having a bad disk and gives me the options of "Initiate, Ignore, Eject" If I click Init