Exchange 2007 to exchange 2013 Mailbox Move problem

Data migrated:
Migration rate:
Error:MigrationPermanentException: Active Directory property ‎'homeMDB‎' is not writeable on recipient ‎'domain.org/ICT_Dept/Abu Bakar Siddikuzzaman‎(ICT-Mirpur)‎‎'. --> Active Directory property ‎'homeMDB‎' is not writeable on recipient
‎'domain.org/ICT_Dept/Abu Bakar Siddikuzzaman‎(ICT-Mirpur)‎‎'.
Md. Ramin Hossain

[PS] C:\Windows\system32>Get-Mailbox arahaman | New-MoveRequest -TargetDatabase "Head-Office"
Active Directory property 'homeMDB' is not writeable on recipient 'domain.org/ICT_Dept/Atikur Rahaman'.
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : [Server=HYPER-SUNMAIL,RequestId=fbb3dcab-54a3-423f-81b5-9c5c397b34b4,TimeStamp=7/2/2014
5:46:07 AM] [FailureCategory=Cmdlet-RemotePermanentException] 63F06918,Microsoft.Exchange.Management.RecipientTask
s.NewMoveRequest
+ PSComputerName : hyper-sunmail.domain.org
Md. Ramin Hossain

Similar Messages

Exchange 2013 Mailbox Move FailedOther

I am attempting to move 600 Mailboxes from my Exchange 2010 SP3 environment over to my Exchange 2013 environment all in all everything is going smooth Exchange is functioning properly.
I have successfully moved half of my users in which I found a problem with 2 accounts. The move status shows "FailedOther" at 95% complete. I have been searching the google for 2 days now and I have not found a solution to this problem. The user
account still shows that is on our old Exchange 2010 server. I have attempted to force restart the move but that fails and it says at FailedOther.
Has anyone seen this problem before? My Environment is as follows
1 Server Mailbox server EMS - Mail box roles - Specs 8 Procs, 14 GB of RAM running on a VM Server 2012 DC
1 Server Cas server - Client access server - 4 Procs, 12 GB Ram running on a VM Server 2012 DC
Exchange 2013 CU1 and all accumulative updates since CU1 release.
I read some where this was because I didn't have enough resources for the move which I then bumped up the server to the current specs and rebooted the VM. I restarted the move with
Get-MoveRequest | where{$_.Status -eq "FailedOther"} | Resume-MoveRequest
Do I need to remove this move request and start from the beginning or should this command work?

I actually figured out this problem on my own.
I did this to resolve problem.
Remove-MoveRequest -Identity username
New-MoveRequest -Identity "username" -TargetDatabase "MAILDatabase" -BatchName "Username" -BadItemLimit "200"
My research shows that our EMS server lost connection to our 2010 Exchange server during the finalization of the move which caused the move to fail. As the last 5% of the move is the clean up process of removing the mailbox and all items off of the old mail
server.
I hope this information is useful to someone else.
Incredible, that worked a treat. Many thanks for taking the time out to post this solution as about 10 of my 50mailboxes got to 95% and failed with this message and now they're working :)

OWA Error after Exchange 2010 Mailbox move to 2013

Hello,
We have been experiencing an issue when we move a users mailbox from Exchange 2010 on-prem to Exchange 2013 on-prem. As a domain admin I was able to access the users mailbox via OWA 2010 with out issues. However, now that they have been
moved over to 2013 I am getting the following error message:
X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.AccessDeniedException
X-OWA-Version: 15.0.995.28
X-FEServer: CASServer
X-BEServer: Mailboxserver.domain.com
Date: 1/29/2015 5:27:38 PM
Full Access permissions appear on the mailbox still via the 2013 ECP console for my account. I have tried running the
Set-Mailbox UserName -ApplyMandatoryProperties command but receive a message that no settings have been modified.
I have also tried to remove/re-add inheritable permissions on the users AD account to no avail.
I have a large group of mailboxes to move over to 2013 and hoping their is a decent solution out there to prevent this from happening.
Greatly appreciate any feedback on this request.
Cheers

Hi,
Please re-add the full access permission for the administrator:
Get-Exchange Server "servername" | Get-Mailbox | Add-MailboxPermission -User Administrator -AccessRights FullAccess
If Administrator is still located in Exchange 2010 and has the full access permission to an Exchange 2013 mailbox ([email protected]) which is moved from Exchange 2010, please use the following URL to open the mailbox:
https://Exch13.domain.com/owa/[email protected]/
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2013 mailbox name resolving vs. exchange server name (mailbox rule)

Hello guys,
I am running exchange 2007 and exchange 2013 CU7 in hybrid mode, while internal autodiscover a record is pointing to exchange 2007 client rule server.
When I configure outlook mailbox located on exchange 2007- I can use autodiscover using mail address ore resolve mailbox name vs. exchange server name.
When I configure outlook mailbox located on exchange 2013- I can configure it only using autodiscover mechanism ( email address - next- next etc.).
We are using EMC backup software which works with MAPI. Since I wasn't able to restore granular mailboxes, I contacted EMC and they claimed that it's very important to configure mailboxes resolving.
What should I check and configure to make it work?

Hi,
I think if we want to browse single mailbox by backup software, it will be regard to resolve mailbox name using server name, I suggest you contact EMC supplier to improve it.
By the way, they I type mailbox name which located on exchange 2013 server database and typing exchange 2007 cluster name, server name of exchange 2007 cluster changes automatically to exchange 2013 server on which this mailbox located.
A: first, we should make sure cluster was worked without any problem. Then make sure Exchange 2013 mailbox server was included in cluster.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2013 - Quota notifications problem

Hello,
First of all I want to express mild disappointment with the way quota notification alerts are documented on Technet for Exchange 2013. The only reference I could find is that QuotaNotificationSchedule parameter of the Set-MailboxDatabase cmdlet no longer
does anything: "This parameter has been deprecated in Exchange 2013 and it no longer does anything.".
The only other reference I could find is this forum post:
http://social.technet.microsoft.com/Forums/exchange/en-US/f30bb2ca-91ab-4e69-a8b6-720e6a8a5b83/exchange-2013-quota-notification-message-not-sent-during-schedule?forum=exchangesvrgeneral
where it says: "Quota messages are generated once the user log in to mailbox in exchange 2013."
However, Microsoft Press published a book in 2013 "Inside Out: Microsoft Exchange Server 2013: Mailbox and High Availability" where QuotaNotificationSchedule parameter is being referenced as a working parameter which controls when Quota notification
are being sent.
My experience says that the forum post is correct.
Now onto the problem.
While our customer was still on Exchange 2010 they were the victims of this issue:
http://support.microsoft.com/kb/2480474/en-us which could easily be fixed with
CheckWarningQuota registry key.
Now we have migrated those mailboxes to Exchange 2013 and again, users are not receiving quota notification e-mails. Only a few users receive quota notifications e-mails and those are users that got their mailbox created on the new Exchange 2013 system.
Migrated users do not receive notifications. We have tried CheckWarningQuota on Exchange 2013 but it does nothing. Our theory is that mailbox flag introduced in Exchange 2010 SP1 is migrated with the mailboxes to Exchange 2013 and is the
reason why we are not receiving quota notifications again.
I appreciate thoughts and comments.
Regards,
Dinko

CU8 addresses this issue, however, only for mailboxes not yet moved to 2013: https://support.microsoft.com/en-us/kb/303695
Mailboxes already moved will have to be manually fixed. The issue is they are missing their lcid (location ID). For whatever reason, the attribute does not make it across from 2010 to 2013. However, if you move the mailbox again to another 2013 database,
it fills in the lcid automatically. That is one workaround, but not necessarily a good one for people who have migrated a ton of their users already. So what do you do?
In the KB article, it shows you how to identify the users who are missing their LCID by doing the following in the exchange management shell:
#first load in the ManagedStoreDiagnosticFunctions, you will need this for the get-storequery cmdlet to work.
. .\'C:\Program Files\Microsoft\Exchange Server\V15\Scripts\ManagedStoreDiagnosticFunctions.ps1'
#then generate the list of all mailboxes with an LCID of 0.
$mbxs = get-mailbox –resultsize unlimited| ? {$_.exchangeversion.exchangebuild.major -ge 15}
$mbxsq = $mbxs | %{Get-StoreQuery -Database $_.database -query "select * from Mailbox where Mailboxguid = '$($_.ExchangeGuid)'"}
$mbxsq | ? {$_.lcid -eq 0} |fl displayname, mailboxguid, lcid
You can modify the script to dump the list to a text file if you need to.
Now, to address this, I simply populated the lcid for all my mailboxes. All of mine were en-US or lcid 1033, so it was easy to set them all at once. I just grabbed all Exchange 2013 mailboxes and applied the language (en-US) and DateFormat (MM/dd/yyyy) to
them (replace DOMAIN with your domain name) which in turn sets the lcid to 1033:
$mailboxes = get-mailbox -resultsize unlimited| ? {$_.exchangeversion.exchangebuild.major -ge 15}
($mailboxes).SamAccountName| %{set-MailboxRegionalConfiguration "DOMAIN\$_" -Language en-us -DateFormat MM/dd/yyyy} | FT -a
Incidentally, if you have already migrated all of your 2010 mailboxes, and you are on at least Exchange 2013 CU6, that script will resolve the issue whether you apply CU8 or not. CU8 fixes it for any other mailboxes that have not yet been migrated to 2013.
Hopefully this help you out.
Chris Allen
Microsoft Support Escalation Engineer

Exchange 2013 & 2010 coexist problem. Authentication Credentials Prompt in Outlook

Hello Forum
We have two Exchange servers coexisting together. A new 2013 and a old 2010.
Everything was setup with the help of the Exchange Deployment Assistant.
I have had alot of trouble with Outlook 2013 Prompting for credentials on Exchange 2013 Mailboxes. None of the 2010 Mailboxes expericence this popup.
I solved most of the popup issues with this by changing the ExternalClientAuthenticationMethod to ntlm.(from negotiate)
http://blog.gothamtg.com/2013/10/15/users-constantly-prompted-for-credentials-after-being-migrated-to-exchange-2013/
and installing this update for Outlook:
http://support2.microsoft.com/kb/2899504/en-us
Now 2013 Mailboxes Work without any anoying popups. Except when they try to open another users mailbox that is located on the old 2010 server or a shared 2010 calander.
The connection to Exchange 2010 is working if I input the users password, but should it not work without this popup too?
This connections name acording to Outlook is called: Exchange-Mail RPC/HTTP (remote [NTLM])
We use the same domain for external and internal autodiscover connections.
Test Exchange Connectivity Analyzer shows everything ok.
If i run
get-outlookanywhere | fl *external*
(2013 server)
ExternalHostname                   : webmail.domain.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl          : True
(2010 server)
ExternalHostname                   : webmail.domain.com
ExternalClientAuthenticationMethod : Basic
ExternalClientsRequireSsl          : True
Only one thing I am wondering here is. If I change my old 2010 Auth Method to NTLM if that will break anything i OWA and so on.
What do you Guys have setup in your environments and can you point me towards any troubleshooting?
Thanks!

For us, the changes made in IIS are permanent, there quite possibly is a powershell way of doing it but I am still getting to grips with PS myself so I don't know.
I wont plagiarise others work but these two links here give a good explanation between Basic and NTLM. personally, I have always used basic because I always seem to get problems with NTLM, though one time it did work as expected but I forgot what I did to
get it working now.
https://social.technet.microsoft.com/Forums/exchange/en-US/92178beb-3310-4363-8848-d022a6e2a77f/basic-vs-ntlm-authentication-outlook-anywhere
http://www.sysadminlab.net/exchange/outlook-anywhere-basic-vs-ntlm-authentication-explained

Exchange 2010 mailbox prompts for authentication to Exchange 2013 mailbox

I am in the process of a 2010 to 2013 migration. The only issue I can't seem to manage is an authentication issue with Outlook 2010. My Outlook profile consists of my Exchange 2013 mailbox and a shared mailbox on Exchange 2010. Initially, Outlook was prompting
for authentication to the Exchange 2010 mailbox. Regardless of whether I entered the correct credentials or simply cancelled the prompt, I still had full access to both mailboxes (including Public Folders on 2010). The authentication prompt was removed with
the following command:
Get-OutlookAnywhere -Server my2013exchserver | Set-OutlookAnywhere -InternalClientsRequireSsl $true
The second issue I now have is the reverse of the above: an Exchange 2010 user is prompted for authentication to an Exchange 2013 mailbox. How do I begin to troubleshoot this problem - should I run the same command (above) on 2010? I don't quite understand
how Outlook communicates with Exchange but I am thinking there is an incorrect setting on one of the Virtual Directories(?).
Many thanks.

Hi Dennis,
Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection for your Exchange 2010 mailbox with shared 2013 mailbox. The following example in my test results:
Please check your connection authentication. We can run the following command to set your Outlook Anywhere for Exchange 2013:
Set-OutlookAnywhere -Identity "E15-01\Rpc (Default Web Site)" -InternalClientAuthenticationMethod Ntlm -ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsl $True -InternalClientsRequireSsl $true
In Outlook side, please ensure the following settings in Account Settings:
In Security tab, make sure Always prompt for logon credentials is unchecked and Logon network security is set to Negotiate Authentication.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2010 mailbox moves get stalled

I am Experiencing an issue with Exchange 2010 SP3 UR2 two node DAG environment (server01 and server02). While moving mailboxes from old Exchange 2007 environment I get following errors.
Move for mailbox xxxxxxxxxxxx is stalled because DataMoveReplicationConstraint is not satisfied for the database 'MDB01' (agent MailboxDatabaseReplication). Failure Reason: Database does not satisfy constraint SecondCopy. Throttling completion as database copies
are falling behind.
Get-MailboxDatabaseCopyStatus informs me that server02 Copy and ReplayQueue length on the passive copy are getting big (from 10-500) while moving and the throttling will always pause the move for a while and then start again until it stops again because the
second copy is falling behind. This only happens when I move mailboxes to databases that have active copy of the database on my server01 and passive on server 02. If the active copy is moved to server02 and server01 is the passive copy this does not happen.
So this leads to a conclusion that there is something wrong with server02 replication from server01.
I've traced the replication network and there are no issues. What could be the reason that only the second node suffers from falling back during moves? I would not like to se the datamovereplicationconstraint value to none since this is the only Exhchange
2010 DAG environment where I am facing this issue and the replication should keep up while mailbox moves.

Hello,
" I would not like to see the datamovereplicationconstraint value to none". Do you mean you set
DataMoveReplicationConstraint to SecondCopy? If so, I recommend you use test-replicationhealth cmdlet to check all aspects of the replication and replay status.
Please check if you
configure a lagged database copy.
Please check if there is a witness server, and whether the witness is online.
If not, please set DataMoveReplicationConstraint to SecondCopy.
Besides, please check if there is any error in application log.
Here are some articles for your reference.
http://technet.microsoft.com/en-us/library/dd335158(v=exchg.150).aspx
http://blogs.technet.com/b/exchange/archive/2011/05/06/exchange-2010-mailbox-moves-and-mailbox-resiliency.aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence?

Hi Team,
I am in the phase of upgrading Exchange 2010 to 2013, and introduced 4 MBX and 2 CAS of 2013 servers in co-existence.
Only one production mailbox of 2010 moved to 2013. The owa of the mailbox moved to 2013, is working OK internally coz only internally configured, but when I configure outlook using 2010 settings, it got configured but when I open outlook it doesn't
open and throws an error of some "cannot open set of folders".
Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence? because I havnt configured 2013 CAS servers yet.
Kindly share some KB or tip. Any help is appreciated. Thank You.
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

I'll change Adam's wording slightly - you *MUST* install a CAS 13 server into every site where there is a MBX 13 server.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 Mailbox Role Installation Error

Hi All,
I am getting the below error when installing Exchange 2013 Mailbox Role. This is a Windows Server 2012. Previous Exchange 2013 setup was removed since it had issues with CAS. Now we have removed all previous Exchange software and attributes.
Error:
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -services IIS -DomainController $RoleDomainController
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Microsoft.Exchange.Management.Metabase.IISGeneralCOMException: An IIS directory entry couldn't be created. The error message is The system cannot find the path specified.
. HResult = -2147024893 ---> System.Runtime.InteropServices.COMException: The system cannot find the path specified.
   at System.DirectoryServices.DirectoryEntry
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.RefreshCache()
   at System.DirectoryServices.DirectoryEntry.FillCache(String propertyName)
   at System.DirectoryServices.PropertyCollection.KeysCollection.GetEnumerator()
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetProperties(DirectoryEntry webObj)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetProperties(DirectoryEntry webObj)
   at Microsoft.Exchange.Management.Metabase.IisUtility.GetWebSiteSslCertificate(String webObjectPath)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.FindIisCertificate()
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Any views on this is appreciated.
Regards
Boniface
Senior Systems Administrator

Hi,
After uninstalling the IIS, please run the following command to install prerequisites.
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45,
Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service,
Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
Then remove the “water mark” key and “action” key under the following registry and initiate the setup again.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v15.0\HubTransportRole
In addition, please disable any third-part software for troublwshooting.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

Hi All,
we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013 and i have to add the 2013
servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
Thanks, Venkatesh. "Hardwork Never Fails"

For a step by step follow the deployment assistant
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Performance counters for exchange 2013 mailbox & cas servers?

what are the Performance counters for exchange 2013 mailbox & cas servers?
similar to rpc request for troubleshooting exchange slowness, I haven't found any technet article for exchange 2013.

Hi,
Please see this:
Ask the Perf Guy: Sizing Exchange 2013 Deployments
http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
Hope it is what you need.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 mailbox added to the CAS array

We are upgrading to Exchange 2013 from Exchange 2010. Following the development guide, we have
installed the first mailbox server in the Exchange 2010 environment which has 3 Exchange 2010 CAS server
in the array. When installing the mailbox role, we did not choose the client access role but after
the installation we can see that the Exchange 2013 Mailbox server is added to the CAS array and yet
we did not choose the client access role. How does this happen, and to proceed ?

I see the same thing in my lab:
Get-ClientAccessArray | FL
RunspaceId        : 16b992b3-270f-4ae1-a3c3-fa9e2ea73d69
ExchangeLegacyDN : /o=Wingtiptoys/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Ou
                    tlook.wingtiptoys.ca
Fqdn              : Outlook.wingtiptoys.ca
Site              : wingtiptoys.ca/Configuration/Sites/Default-First-Site-Name
SiteName          : Default-First-Site-Name
Members           : {EXCH-2010, EXCH-2013}
AdminDisplayName :
ExchangeVersion   : 0.1 (8.0.535.0)
Name              : Outlook.wingtiptoys.ca
DistinguishedName : CN=Outlook.wingtiptoys.ca,CN=Arrays,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administr
                    ative Groups,CN=Wingtiptoys,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=wingtiptoys,DC=ca
Identity          : Outlook.wingtiptoys.ca
Guid              : 27968af1-1624-4ff3-85c8-e38e68183afe
ObjectCategory    : wingtiptoys.ca/Configuration/Schema/ms-Exch-Client-Access-Array-2
ObjectClass       : {top, server, msExchExchangeServer, msExchClientAccessArray}
WhenChanged       : 4/12/2014 12:51:18 PM
WhenCreated       : 4/12/2014 12:51:18 PM
WhenChangedUTC    : 4/12/2014 7:51:18 PM
WhenCreatedUTC    : 4/12/2014 7:51:18 PM
OrganizationId    :
OriginatingServer : DC-1.wingtiptoys.ca
IsValid           : True
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Mailbox Move Problem

Hi,
I need mailbox move between 2 exchange 2013 mailbox server. But we receive an error message and failed job. Status datail StalledDueToWriteUnknown. how to correct this problem ? thank you.
New-MoveRequest -Identity "user1" -TargetDatabase "Mailbox DataBase05" -BadItemLimit 300
[PS] C:\Windows\system32>Get-MoveRequestStatistics -Identity user1
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComplete
user1         StalledDueToWriteUnknown 1.704 GB (1,829,622,48...
20

Hi,
Does this issue only occur when migrating the user1?
In order to narrow down whether it is an issue with the user mailbox, please create a test mailbox and try to move it for a test.
If this issue occur to all the users, I suggest we first temporarily disable the “health check” service, raise the baditem limitation to 999.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Migrate mailbox from Exchange 2007 to Exchange 2013, mailbox stay in queue

Hi,
I'm trying to migrate a mailbox but the request is staying in queue, according to : Get-moverequest | Get-Moverequeststatistics
Configuration server Exchange 2007 SP3 :
Domain : test.com
OS : Windows 2008 server SP2 (not R2)
Firewall : OFF
Exchange roles are on separate three servers : CAS - MAILBOX - HUB.
Configuration Server Exchange 2013 :
Domain : new.com
OS: Windows 2012 R2
Firewall : OFF
This environment is on a closed network unable to reach internet.
I have try to restart the Replication service, but it didn't worked.
I've searched a lot but i can't find any information to help me. The mailbox stays in queue....
Anyone ever had this issue?
Thanks you and have a nice day.

Hi ,
Based on my knowledge below things need to checked.
1.Please check the content index state of the target database is healthy and ensure the entire mailbox database status was in healthy state.
2.If your exchange 2013 is an single server and target database copy doesn't have the second copy then we need to set the below parameter value to none.
DataMoveReplicationConstraint : None
Note : After the above change ,Microsoft exchange mailbox replication service needs to be restarted.
3.Restart the Microsoft exchange mailbox replication service and check the results.
4. Have you tried moving the same mailboxes to the different databases.
5.If the move request is in the failed state then we can export the details of the move request to find out the exact cause for the failure.
Get-MoveRequestStatistics -Identity "nithya" -IncludeReport | fl >c:\nithya.txt
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

Exchange 2007 to exchange 2013 Mailbox Move problem

Similar Messages

Maybe you are looking for