Exchange 2007 to Office 365.

Hello,
We're upgrading our Exchange 2007 to Office 365. We can't store a small portion of our emails in office 365 (cloud) due to contract obligations that says storing data outside of the UK is not allowed.
I can see there is a way to create a pst on a network location to store this small portion of data but when my pc is away from the office network, i receive an error saying it can't find the PST. Is there a way to stop the error appearing? I only want the pst folder to appear if they are on the office network? Or do you have a different solution i mind to solve our problem?
Thanks
This topic first appeared in the Spiceworks Community

Hi
http://blogs.technet.com/b/canitpro/archive/2013/11/20/step-by-step-migrating-from-exchange-2007-to-office-365.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

The attempt to contact Autodiscover using the HTTP Redirect method failed. Exchange 2007 to Office 365 Cutover Mirgation

I am getting the following error message shown below. Wondering if i could get some help on how to resolve this issue.

My understanding is that the only way to resolve this issue is to install an Exchange 2010 or 2013 server in your on-premises organization and configure that as a hybrid server. Once you configure your Autodiscover record to point to the Office 365
hostname as shown in "domains", this should no longer be an issue.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Migrate Notes from Exchange server 2007 to office 365

Hi,
Anyone help me to how to migrate notes from exchange server 2007 to office 365 . My customer having notes on his existing exchange account . We would like to move notes to office 365 .
Please help me or guide me .
Thanks & Regards,
Vinoth

The way you're doing it has two very high hurdles.
First, you have to get the data out of an offline server and into Office 365. That's hardly a trivial task. If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How to use Powershell to set delegate for user mailbox in Exchange 2010 and Office 365

Hello,
Can you please tell me if I can set delegate for user mailbox in Exchange 2010 or Office 365 using Powershell?
If I can, then how can I do that? (which Powershell commands for setting the delegate?)
Many thanks, and have a good day!

Hi,
If you wanted to add a delegate to possiblly a large number of users or you do this during mailbox provisioning. So the following script will use
impersonation to access another users mailbox and add a delegate.
$mbtoDelegate = "[email protected]"
$delegatetoAdd = "[email protected]"
$dllpath = "C:\Program Files\Microsoft\Exchange\Web Services\1.0\Microsoft.Exchange.WebServices.dll"
[void][Reflection.Assembly]::LoadFile($dllpath)
$service = new-object Microsoft.Exchange.WebServices.Data.ExchangeService([Microsoft.Exchange.WebServices.Data.ExchangeVersion]::Exchange2007_SP1)
$windowsIdentity = [System.Security.Principal.WindowsIdentity]::GetCurrent()
$sidbind = "LDAP://<SID=" + $windowsIdentity.user.Value.ToString() + ">"
$aceuser = [ADSI]$sidbind
$service.AutodiscoverUrl($aceuser.mail.ToString())
$service.ImpersonatedUserId = new-object Microsoft.Exchange.WebServices.Data.ImpersonatedUserId([Microsoft.Exchange.WebServices.Data.ConnectingIdType]::SmtpAddress,
$mbtoDelegate);
$mbMailbox = new-object Microsoft.Exchange.WebServices.Data.Mailbox($mbtoDelegate)
$dgUser = new-object Microsoft.Exchange.WebServices.Data.DelegateUser($delegatetoAdd)
$dgUser.ViewPrivateItems = $false
$dgUser.ReceiveCopiesOfMeetingMessages = $false
$dgUser.Permissions.CalendarFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Editor
$dgUser.Permissions.InboxFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Reviewer
$dgArray = new-object Microsoft.Exchange.WebServices.Data.DelegateUser[] 1
$dgArray[0] = $dgUser
$service.AddDelegates($mbMailbox, [Microsoft.Exchange.WebServices.Data.MeetingRequestsDeliveryScope]::DelegatesAndMe, $dgArray);
Hope this helps.

Migrate Exchange 2003 to Office 365

Dear all,
We are going to migrate Exchange 2003 to Office 365. Because of the large number of mailboxes and mail databases, we decide to build hybrid to support coexistence during the migration period.
According to "Exchange Server Deployment Assistant" I found that we can build more Exchange 2010 for that requirement
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-BwAIAAAAQAAAAAEAiFIAAAA~
I just wonder that after deploying the Exchange 2010, can we move directly the mailboxes from Exchange 2003 to Office 365 or we need to move to Exchange 2010 first (as a "buffer") before moving to Office 365
Thanks a lot !!!

Hello,
The main goal of a staged migration is to migrate Exchange on-premises servers when:
1. You have more than 2000 mailboxes.
2. You plan to migrate over a few weeks and months rather than in a single batch.
3. You want to migrate to the Cloud completely and remove your on-premises Exchange deployment.
Hybrid scenarios are useful when you do not want to remove your on-premises deployment. In some cases there is no technical possibility, it is not cost-effective etc. to move a whole organization to Office 365. In these situations you may decide that moving
only some mailboxes to Office 365 is a good option and create a hybrid deployment.
You need to consider all pros and cons, especially when Exchange 2003 has gone out of support lifecycle and then choose the better option for your organization.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

Exchange 2010 to office 365 migration lab

I am looking out for free migration lab if any available online from Microsoft or any vendor related to migrate from exchange 2010 to office 365 . Please suggest ?
Aditya Mediratta

Hi,
Unfortunately, there’s no related lab for use.
We can Microsoft Exchange Server Deployment Assistant to generates a custom step-by-step checklist that will help you deploy different versions of Exchange Server for different types of scenarios. For your reference:
https://technet.microsoft.com/en-us/office/dn756393.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Decommissioning Exchange 2003 after Office 365 Migration

Hello,
My company recently migrated from Exchange 2003 to Office 365 and are working on decommissioning our on-premises Exchange 2003 server. We believe everything is ready to go, however this Microsoft article: http://help.outlook.com/en-us/140/ff959224.aspx#nextsteps has
a big Caution box warning of "unintended consequences" and recommending I contact Microsoft Support:
I've tried my Office 365 support options, but they only tell me that Exchange 2003 is no longer supported and they can't help me, despite the fact that I'm trying to remove it, not maintain it. So
I'm allowed to pay for a new service, but shouldn't expect assistance in safely moving from my old service...
Regardless, they directed me here, so I was hoping someone might be able to advise about what these "unintended consequences" actually are so I can feel fully prepared to decommission.
Thanks in Advance,
Jim

Hi,
After you’ve verified that all e-mail is being routed directly to the cloud-based mailboxes, completed the migration, and no longer need to maintain your on-premises e-mail organization or don’t plan on implementing a single sign-on solution, you can uninstall
Exchange from your servers and remove your on-premises Exchange organization. For more information, see the following:
How to Uninstall Exchange Server 2003
http://technet.microsoft.com/en-us/library/bb125110(EXCHG.65).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Project 2007 with Office 365 online

Hi,
I am looking for the Project 2007 compatibility with Office 365 online with SP 2013.
Is this possible? If yes, what is the procedure to configure that.
I have not worked on Project Server, if anyone can help me or provide any reference links that will be very helpful.
Thanks
Ankit
Thanks Ankit

Ankit,
You are talking about multiple things in your question, so let me try and clarify the question.
1) Office 365 +SP 2013 is not Project Server. Project Server is a totally separate application built on SharePoint. And in Office 365, Project Server is offered as Project Online, which is an additional license you need to purchase.
2) With that settled, I will assume you are talking about Project Stand-alone with SharePoint. As far as I know, this "Sync" functionality was only available starting Project 2010, so I am guessing using Project 2007 will not work.
3) That pretty much leaves us with Manually uploading Project (.mpp) files into SharePoint, just like any other document, and if this is what you want, then it should work with no issues.
If none of the above answered your question, please post some more details, and we will try to help.
Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com

Multiple Legacy Exchange Forests - Single Office 365

I currently have 2 legacy Exchange forests:
legacysales.com
legacyservices.com
Both of these organisations are being migrated to a consolidated Active Directory:
newsalesservices.com
The new organisation will use Office 365. There will be no On-Premise Exchange in this organisation.
My challenge is to migrate to new AD and Office 365.
I can't find much info on this so here is my proposed plan:
Configure hybrid deployment in legacysales.com with newsalesservices.com Office 365 and migrate mail.
Configure hybrid deployment in legacyservices.com with newsalesservices.com Office 365 and migrate mail.
Migrate AD user objects from legacysales.com to newsalesservices.com on-premises AD (use ADMT, retain SIDs etc.)
Migrate AD user objects from legacysales.com to newsalesservices.com on-premises AD (use ADMT, retain SIDs etc.)
Use new Azure Active Directory Sync (AADS) to sync from new AD user objects in newssalesservices.com AD to newsalesservices.com Office 365 (match on different attribute e.g. legacy mail address).
Does anyone have any experience with a similar scenario? Any caveats? Any feedback?
Should I maybe migrate the AD objects first (although the mail sync will always have to occur from legacy forests to Office 365 anyway).

Hi SupCra,
Your proposed plan seems technically right, but has some risks.
Will aadsync actually match the dirsync objects
Are all required attributes available in the new forest, probably you will still need to extend the AD schema to have some required Exchange properties (like
ms-Exch-Hide-From-Address-Lists properties).
If you can create a test setup I would be very interested in the results!
A more safer approach will be the use of an external migration tool.
Setup AADSync with the new forest and Office365
Create user mailboxes
Incremental sync of mailboxes
Cut-over
Although there are limitations with this approach too!
How many users do you have? Is a batched migration required?

Can I migrate users from a hosted Exchange 2010 to Office 365 Enterprise E1 without the need of third party software?

I am hoping I am posting to the correct forum. We are currently using a hosted Exchange 2010 service through Intermedia and due to continuing issues with them and the pricing, we are getting ready to migrate to Microsoft’s Office 365 Enterprise
E1 platform. My question is this, besides the fact that we will need to set up ADFS for SSO, will I be able to migrate our existing mailboxes from Intermedia to Office 365 without having to purchase additional software?
The current configuration we have with Intermedia allows for us to use OWA and our OST files for our current users are cached locally on the workstations.
We also do not have any public folders in use. I have searched the web, but I have not been able to find a definitive answer or steps that I should take to prepare for this type of migration.
Any suggestions on this matter would be appreciated. Thank you.

It looks as I should be able to from reading that article. Not sure why the company that want to set this all up for me wanted $12,000 for something I can do with 6 steps.
Thank you

Exchange 2010 and Office 365

Haven't been able to find a definitive answer from our friends at Microsoft or Google, so here goes!I have a client (lets call the Client A) with onsite SBS Server (Exchange 2010 SP3) of 50 seats. The client has multiple meeting rooms, defined as resource mailboxes and makes extensive use of free/busy info for booking staff and resources for meetings.That part is all good!Recently, a related organization (who we'll call Client B) moved into the same office with them. The second organization (who has IT support provided by another company) uses Office 365 for their email services and has a completely different domain name etc.Because they are related, Client A has requested that they and Client B integrate their calendars so that staff from clients A & B can see each others free/busy info, invite each other to meetings and staff from...
This topic first appeared in the Spiceworks Community

Hi,
If you wanted to add a delegate to possiblly a large number of users or you do this during mailbox provisioning. So the following script will use
impersonation to access another users mailbox and add a delegate.
$mbtoDelegate = "[email protected]"
$delegatetoAdd = "[email protected]"
$dllpath = "C:\Program Files\Microsoft\Exchange\Web Services\1.0\Microsoft.Exchange.WebServices.dll"
[void][Reflection.Assembly]::LoadFile($dllpath)
$service = new-object Microsoft.Exchange.WebServices.Data.ExchangeService([Microsoft.Exchange.WebServices.Data.ExchangeVersion]::Exchange2007_SP1)
$windowsIdentity = [System.Security.Principal.WindowsIdentity]::GetCurrent()
$sidbind = "LDAP://<SID=" + $windowsIdentity.user.Value.ToString() + ">"
$aceuser = [ADSI]$sidbind
$service.AutodiscoverUrl($aceuser.mail.ToString())
$service.ImpersonatedUserId = new-object Microsoft.Exchange.WebServices.Data.ImpersonatedUserId([Microsoft.Exchange.WebServices.Data.ConnectingIdType]::SmtpAddress,
$mbtoDelegate);
$mbMailbox = new-object Microsoft.Exchange.WebServices.Data.Mailbox($mbtoDelegate)
$dgUser = new-object Microsoft.Exchange.WebServices.Data.DelegateUser($delegatetoAdd)
$dgUser.ViewPrivateItems = $false
$dgUser.ReceiveCopiesOfMeetingMessages = $false
$dgUser.Permissions.CalendarFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Editor
$dgUser.Permissions.InboxFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Reviewer
$dgArray = new-object Microsoft.Exchange.WebServices.Data.DelegateUser[] 1
$dgArray[0] = $dgUser
$service.AddDelegates($mbMailbox, [Microsoft.Exchange.WebServices.Data.MeetingRequestsDeliveryScope]::DelegatesAndMe, $dgArray);
Hope this helps.

Old Exchange Script to Office 365 Exchange

Previously, I was using the script (on our old Exchange server) below to create a report on all emails sent to a different domain name aside from our company's registered domains. Now, we are using Office 365 and I don't know how to make this work.
Here is my script for collecting emails not sent to our company's registered domains:
Get-MessageTrackingLog -ResultSize Unlimited -EventID "SEND" | where{$_.recipients -notlike "*@company.com, *@company-1.com"} |select-object Timestamp,Source,EventId,Sender,{$_.Recipients},MessageSubject | Format-Table -Wrap -AutoSize|
Out-File -FilePath "X:\EmailLogs\EmailLog $(get-date -f yyyy-MM-dd).txt" -width 1000
Now this is the second script I use to "pull" the logs and send emails for notification:
$date = Get-Date -Format d.MMMM.yyyy
$source = "X:\EmailLogs\EmailLog $(get-date -f yyyy-MM-dd).txt"
$destination = "\\Company-Shared\EmailLogs\"
$path = test-Path $destination
$smtp = "EXCH01"
$from = "Sender <[email protected]>"
$to = "Recipient <[email protected]>"
$body = "This is a scheduled-automated e-mail message. Exchange Log file copied to \\Company-Shared\EmailLogs shared folder: $date"
$subject = "Exchange Log Backup on $date"
if ($path -eq $true) {
copy-Item -Path $source -Destination $destination
$backup_log = Dir -Recurse $destination | out-File "$destination\backup_log.txt"
$attachment = "$destination\backup_log.txt"
send-MailMessage -SmtpServer $smtp -From $from -To $to -Subject $subject -Body $body -BodyAsHtml
send-MailMessage -SmtpServer $smtp -From $from1 -To $to1 -Subject $subject1 -Attachments $attachment -Body $body1 -BodyAsHtml
write-host "Copy Sucessfull"
How can I make this work for our new Office365?
Thank you.

I tried converting it with Get-MessageTrackingLog but I get this error. Can someone help me out on the conversion of this script:
A parameter cannot be found that matches parameter name 'ResultSize':
+CategoryInfo : InvalidArgument: <:> [Get-MessageTrace], ParameterBindingException
+ FullyQualifiedErrorID: NamedParameterNotFound, Get-MessageTrace
+ PSComputerName: xxxxxxxxx.outlook.com
Thank you.
Look at the link I posted for Get-MessageTrace.
It does not have the same parameters as Get-MessageTrackingLog.
You cannot specify an Event type, and Sender and Recipient addresses can only be filtered by either a list of addresses or a single wildcard string (you can't use multiple wildcards), so if you have multiple accepted domains you're either looking at late
filtering or getting multiple traces, each one filtered on one accepted domain.
Here's an example using late filtering.
$O365_SessionParams =
ConfigurationName = 'Microsoft.Exchange'
ConnectionUri = 'https://ps.outlook.com/powershell/'
Authentication = 'Basic'
AllowRedirection = $true
# ErrorAction = 'Stop'
# Credential = $Credential
$O365_Session = New-PSSession @O365_SessionParams
Import-PSSession $O365_Session -CommandName Get-MessageTrace
$TraceParams =
StartDate = (Get-Date).AddDays(-1).ToShortDateString()
EndDate = (Get-Date).ToShortDateString()
PageSize = 1000
# ErrorAction = 'Stop'
$AcceptedDomains = '@company\.com$|@company-1\.com$'
$TraceResults =
Get-MessageTrace @TraceParams |
Where-Object { ($_.SenderAddress -match $AcceptedDomains) -and
($_.RecipientAddress -notmatch $AcceptedDomains) }
That was copied from script I have message tracing, and those Credential and ErrorAction parameters are for accepting alternate credentials and error handling in the script, and I left that code out for the example, so they've been commented.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Upgrading from outlook 2003 and 2007 to office 365 small business outlook

We just bought office 365 small business thinking I can easily set up outlook as we did in outlook 2007.
That is creating an account using POP3 and SMTP for every individual.
I just started watching a video of how to set up the out look in office 365 and it does not make any sense to add all 30 mail boxes set up in Network solutions and work around our domain names and all sort of unnecessary complicated step to use this on line
office.
Can we just set it up the way we did in outlook 2007 without having to deal with all parties involved?
Regards;

Hi,
I suppose you used Office Customization Tool (OCT) to create the POP3 accounts for the users? With OCT it's quite easy with .prf as I can tell. However, in Office 365 we don't have OCT so that's probably why you don't know how to create the
accounts for users.
Due to the lack of related resource here, I actually suggest you post the question in Office 365 Community, where this question can be properly addressed:
https://community.office365.com/en-us/f/default.aspx
Regards,
Melon Chen
TechNet Community Support

Exchange 2010 to Office 365 federation trust

I'm trying to setup a federated trust between two companies on different domains (Exchange 2010 SP2 on premise/Office 365). We are trying to share calendar information and contacts. I've gone through the steps to setup a federated trust and created
the TXT file for the (Exchange 2010) on premise domain. When I try creating the trust from the Exchange 2010 on premise domain to Office 365 I receive an error.
COMMAND:
Set-FederatedOrganizationIdentifier –AccountNamespace <some_domain> –DelegationFederationTrust “Microsoft Federation Gateway”
ERROR:
Proof of domain ownership has failed. Make sure that the TXT record for the specified domain is available in DNS. The format of the TXT record should be "example.com IN TXT hash-value" where "example.com" is the domain you want to configure
for Federation and "hash-value" is the proof value generated with "Get-FederatedDomainProof -DomainName example.com".
Do I need to create a TXT file for the Office 365 side?
Thanks
Stephen

You need to add this TXT record for your domain and publish it EXTERNALLY, so that the MFG can verify it. For example, check the TXT records for Microsoft.com:
PS C:\> Resolve-DnsName -Type TXT microsoft.com
Name Type TTL Section Strings
microsoft.com TXT 2346 Answer {FbUF6DbkE+Aw1/wi9xgDi8KVrIIZus5v8L6tbIQZ
kGrQ/rVQKJi8CjQbBtWtE64ey4NJJwj5J65PIggVY
NabdQ==}

Exchange connector to Office 365

Dears,
I am beginner to SCSM, so please forgive my non professional questions.....
I am trying to connect my Service Manager to Office 365, and I have below questions
In general settings > Enter one or more active directory: I added my local domain (John.Lab)
Is this correct?
In server settings > Use Auto discovery: I did not check it Is this correct?
In server settings > Exchange Server URL, I added: "https://pod51036.outlook.com/EWS/Exchange.asmx" is this correct or do I have to add:
https://pod51036.outlook.com/owa?
In server settings > User impersonation can I use this settings to link it with my IR since I am using office 365? "actually this is the main reason for my exchange connector?
In server settings > Run as account:
can I use a domain user account which does not have Mailbox and
mail address?
Thank you

Hi,
1. This is correct
2. This is correct
3. This looks good. Otherwise, try
https://outlook.office365.com/EWS/Exchange.asmx
4. No. You must not check this option.
5. You have to create a separate Run As account. The username would be [Office 365 Domain]\[Office 365 User Name], and the Password. SCSM will not be able to validate the credentials, however you can still accept it.
HTH,
Dieter

Exchange 2007 to Office 365.

Similar Messages

Maybe you are looking for