Exchange 2007 with pop3 downloader to office 365 migration
Hi,
i would like to migrate my exchange server (exchange 2007) to office 365,
presently i am downloading mails from a online mail service to exchange 2007 through a pop3 downloader and i am distributing this mails locally ( around 20 mail box)
how do i migrate my exchange mails to office 365, is there any automated way to do the same
requesting your valuable suggestions
Regards
Ratheesh
Ratheesh
Hi,
The partially complete in the migration report means there are some items have been skipped due to some reasons. If you check the skipped items, you will see the value is not 0 like other users with status as complete. Usually, this value is not high(1 or
2 in most circumstances) which means only limited items have been skipped.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
Similar Messages
-
Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support -
Project Online with Project Pro for Office 365
Hi,
I have several licences for Project Online with Project Pro for Office 365.
Project Web App is working fine, as well as Excel Web App, Word Web App...
I just miss Project Pro for Office 365. I don't know were to find it, how to activate it :-(
Thanks for your help !Please find the link for activation
http://technet.microsoft.com/en-us/library/gg982959.aspx
for trouble shooting
http://support.microsoft.com/kb/2745026
http://social.technet.microsoft.com/Forums/projectserver/en-US/bbd848ab-b383-46b7-b968-91d233d252eb/how-to-install-project-online-and-project-pro-for-office-365?forum=projectprofessional2010general
kirtesh -
Project working with Project Online in Office 365
Hello,
My question is related to project working and using Project Online to track projects.
* Can I use a single "Project Online with Project Pro for Office 365" subscription for tracking and creating reports about all project sites and their tasks in Office 365?
Meaning, if we have multiple projects designed in Project Pro and then uploaded directly to Office 365, can we gather the task, resource and progress information from these projects (created directly to Office 365) in a Project Online overview? One person
using Project Online to oversee multiple projects, others uploading their projects and changing task information in Office 365 to a SharePoint site with Project Pro and Office 365 subscriptions.
We want to have one person with Project Online overseeing the progress and create reports on all projects that have been uploaded to Office 365 (Project Portfolio Management), but not creating new projects. Is this possible with just one Project Online subscription?
The other users would all have an Office 365 Enterprise 3/4 subscription for accessing Office 365, collaborating and updating their tasks. Project managers would have a Project Pro subscription for creating and uploading projects to Office 365.
Thank you in advance.Helen,
Your question is slightly confusing, so let me try and say it this way:
1) Your PMs (multiple) will use Project Pro, to create and publish plans to Project Online
2) You will have one user who will 'administer' Project Online and create reports etc.,
3) You will not have any other users access Project Online
4) I am not sure about you 'SharePoint' comment--so excluding this.
The problem is that, Project Pro+Office 365 does not necessarily give you access to Project Online. This combination is more useful when you are using just Project Pro or using project Pro to sync plans with Task lists on SharePoint Site. Plans that are
uploaded this way will NOT appear in Project Online. So, the person who has the Project Online license will not have any data to report on.
Having said that, here are few options:
1) Stick with Project Pro +Office 365. Team Members can access "Task" lists in SharePoint Sites. In this scenario, Reporting will be somewhat complex, because each site is its own, and you might have to customize to be able to report across multiple sites.
2) If you want an easier Project Portfolio Management, Project Online is better. However, in this case, your PMs need to get Project Online with
Project Pro for Office 365 which will allow them to publish plans to Project Online. Then your user with project Online license can generate reports for the portfolio easily. In this scenario, if you want team members to be able to submit timesheets,
work with documents etc., you might want to look into getting the Project Lite for them (http://blogs.office.com/2014/03/31/project-lite-may-1st/)
Hope it helps.
Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com -
Can't activate Office 2011 for mac (downloaded from office 365 portal)
Hello All,
I've installed Office 2011 for mac which was downloaded from office 365 Portal. However, during installation process there was not a windows for activation (key or sign in method).
Is there a way to force activation on Office 2011 for mac?
Note: I've deleted office 365 com.microsoft.office.plist but i didn't get a windows for activation.
MacbookPro Version 10.10.2
Regards
JOHi,
If you downloaded Office 2011 for Mac, you may not need a product key to activate it. Office 365 uses a new mechanism that the activation is based on your Office 365 Account instead of a product key.
Anyway, in this forum we mainly discuss questions and feedbacks about Office for Windows, as your question is about Office for Mac, I suggest you post the question in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
I've also noticed this question is actually more related to the activation, you may need to contact the local customer service to get more dedicated assistance:
https://support.microsoft.com/gp/customer-service-phone-numbers/en-us?wa=wsignin1.0
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Office 365 Migration Challenges
Hi everyone,
Currently, I am evaluating the various challenges or Concern that need to be taken care at the time of Office 365 migration.
For example if I have to migrate Nintex workflow from SharePoint on-premise to SharePoint Online, Whether It is possible or not? If possible then whether it can be easily migrated or there need to do some work around it to achieve that?
Office 365 (Sharepoint Online) Integration with K2 workflow, Salesforce CRM, Biztalk, Business Objects (BO), etc. ?
Office 365 (Sharepoint Online) Connection to External Data i.e. Business Connectivity Services (BCS), etc. ?
Also, Migration is not limited to only SharePoint Online. It can be Exchange Online, Lync Online, Single sign-on etc.
Can any one please assist me. It would be helpful for me.Would mail continue to flow unimpeded?
Do I have to change my inbound/outbound connectors to the Partner option from On-prem?
The hybrid connectors in EOP should not impact messages sourced or destined to the Internet.
Going forward if my on-prem exchange becomes unavailable (through outage, uninstallation, normal update restarts) would that affect the mail-flow?
Assuming there are no on-premises mailboxes or applications leveraging the hybrid server, there should not be an interruption.
Would it be safe to remove the inbound/outbound connectors?
Yes however I would start by disabling and leaving in-place.
Would I uncheck the Hybrid-Deployment box in WaaD (DirSync) and maintain directory synchronization?
As long as you're using DirSync, your on-premises AD is still authoritative for objects in the cloud. This means if you want add a proxy address for a user, you add it in AD and it syncs to Office 365. You will still want the write-back enabled.
I would also plan to keep an on-premises Exchange server around for management purposes.
ADFS has not been implemented yet but I would like to eventually. Should I be take that into consideration with any of these questions?
Should not come impact any decisions here.
Joseph Palarchio http://www.itworkedinthelab.com -
Office 365 Migration, Hybrid to Online Only
This is my first Office 365 migration. I took over the project that was partially started by my predecessor who left abruptly.
Current status of the project is moving along. I have all of the mailboxes in 365. My concerns are related to redirecting mail flow. Currently DNS records point to our on-prem. If I were to redirect DNS to 365 (ourdomain-com.mail.protection.outlook.com)
Would mail continue to flow unimpeded?
Do I have to change my inbound/outbound connectors to the Partner option from On-prem?
Going forward if my on-prem exchange becomes unavailable (through outage, uninstallation, normal update restarts) would that affect the mail-flow?
We will be removing our on-prem exchange server permanently once mail is flowing correctly. After this,
would it be safe to remove the inbound/outbound connectors?
Would I uncheck the Hybrid-Deployment box in WaaD (DirSync) and maintain directory synchronization?
ADFS has not been implemented yet but I would like to eventually. Should I be take that into consideration with any of these questions?
Thank you for your advice and patience on this one. Its a new situation that I was dumped into and I've learned a lot from technet guides and pluralsight classes but nothing beats bouncing questions of others who have done it before though.Would mail continue to flow unimpeded?
Do I have to change my inbound/outbound connectors to the Partner option from On-prem?
The hybrid connectors in EOP should not impact messages sourced or destined to the Internet.
Going forward if my on-prem exchange becomes unavailable (through outage, uninstallation, normal update restarts) would that affect the mail-flow?
Assuming there are no on-premises mailboxes or applications leveraging the hybrid server, there should not be an interruption.
Would it be safe to remove the inbound/outbound connectors?
Yes however I would start by disabling and leaving in-place.
Would I uncheck the Hybrid-Deployment box in WaaD (DirSync) and maintain directory synchronization?
As long as you're using DirSync, your on-premises AD is still authoritative for objects in the cloud. This means if you want add a proxy address for a user, you add it in AD and it syncs to Office 365. You will still want the write-back enabled.
I would also plan to keep an on-premises Exchange server around for management purposes.
ADFS has not been implemented yet but I would like to eventually. Should I be take that into consideration with any of these questions?
Should not come impact any decisions here.
Joseph Palarchio http://www.itworkedinthelab.com -
Exchange 2007 Decommissioning, post Office 365 migration
Hello,
We have four Exchange 2007 servers in four different sites, single AD. All four Exchange servers are CAS, Mailbox, Hub, secondary domain controllers. We have migrated to Office 365 successfully, and would like to remove the Exchange 2007 servers.
I have stopped the Exchange services on all four for at least a week and tested Office 365 mail flow with no issues. My questions are:
1) Can I expect to simply uninstall Exchange 2007 from each server, one by one, without a negative impact to Active Directory?
2) Should/can the many Mailbox Databases be deleted prior to uninstalling Exchange 2007? Not all mailboxes had to be migrated to Office 365, and they contain data that we no longer need.
If there is a 'safe' method to remove Exchange in a multi-site setup, I would prefer to try that before having to dig through ADSIedit.
Thank you in advance.Hi Chase,
here's an
official guide for uninstalling Exchange 2007. Please also note the other documents in the same library directory (see navigation pane to the left).
Cheers,
Fred
There's no place like 127.0.0.1 -
Environment: 1x Exchange 2013 Mailbox server
1x Exchange 2013 CAS server
All users migrated to office365. MX record pointed to Office365
DIRSync implemented
Clarification: All users are now using Office365. As per recommendation from Microsoft there should be 1 exchange server to be retained and the rest can be decommissioned. I tried to test the scenario by shutting down the exchange server
with the mailbox role and leaving the exchange server with CAS role online. I tried to run Exchange Management shell on the CAS but I'm getting errors. To clarify, once I have uninstalled the Exchange server mailbox will the CAS still look for the mailbox
server? Or do I need to decommission both Exchange servers and then install a new Exchange server with CAS role?Hi
If you are looking for a hybrid coexistence with office 365 then at least one Exchange 2013 Client Access and one
Exchange 2013 Mailbox server must be installed in the on-premises organization to run the Hybrid Configuration wizard and support Exchange 2013-based hybrid deployment functionality.
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Summary - You need to have at-least one CAS and MBX combined together in onpremise or it can even be seperate CAS and seperate MBX but microsoft recommends to have both CAS and MBX together in onpremise
Source -
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
Winmail.dat attachments from Exchange 2013 on premi and Hosted Office 365 set up.
Hello TechNet,
I have an on going situation with winmail.dat attachments. I currently have a ticket open with Microsoft, but I want to see if anyone has personal experience with this. Here is the rundown.
We have migrated from an Exchange 2007 server to Exchange 2013 for the migration to Office 365. We also have a hosted Office 365 server with half of our mailboxes in the cloud and half of them on the Exchange 2013 on premise server.
The current settings for TNEFEnabled:
On Premise: False
Hosted: False
Whenever a internal email with a calendar invite(exchange calendar, go to meeting) goes out to any external domain the recipients receive winmail.dat.
When settings for TNEFEnabled On Premise and Hosted are set to true both calendar invites and PDF, Excel attachments etc the recipients receive winmail.dat.
When speaking with Microsoft about this issue. The representative was watching me through a LogMeIn session as I set both TNEFEnabled false on both on Premise and Hosted.
This is really frustrating as many employees depend on this to be fully functional, and to be honest am tired of dealing with this.
I need help.
-BenI am having the same issue.
Luckily I have only migrated my own mailbox to office365.
Tried both true and false TNEFEnabled on both onpremise and office365 via powershell and confirmed that both have been applied.
If I send the email as a plain text then the attachment works ok. If I send it as HTML then I get winmail.dat.
The above KB doesnt really help me, sending plain text emails is like going back to the dark ages!
I am sending from outlook to outlook (I send from my external email address, to my work email address and visa-versa)
If someone with an onpremise mailbox sends me an email, the attachment works ok.
If someone sends me an attachment via hotmail, the attachment works ok.
It seems to only effect emails I send to myself through outlook, i am sending it through a POP3 account to our onpremise exchange 2010 which forwards the email to office365 -
Exchange 2007 - Setup POP3 access
We are currently running Exchange 2007 server. Users request for access via Outlook from home computers. Can someone point me in the direction to accomplish this? I've enabled POP and IMAP on the server, but not sure where to setup Incoming and Outgoing
mail server settings.Testing Outlook connectivity.
The Outlook connectivity test failed.
Additional Details
Elapsed Time: 22449 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for
[email protected].
Testing Autodiscover failed.
Additional Details
Elapsed Time: 22448 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service couldn't be contacted successfully by any method.
Additional Details
Elapsed Time: 22448 ms.
Test Steps
Attempting to test potential Autodiscover URL
https://co.hernando.fl.us:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 21291 ms.
Test Steps
Attempting to resolve the host name co.hernando.fl.us in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 24.129.129.232 Elapsed Time: 238 ms.
Testing TCP port 443 on host co.hernando.fl.us to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
Tell me more about this issue and how to resolve it
Additional Details
A network error occurred while communicating with the remote host.
Elapsed Time: 21053 ms.
Attempting to test potential Autodiscover URL
https://autodiscover.co.hernando.fl.us:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 655 ms.
Test Steps
Attempting to resolve the host name autodiscover.co.hernando.fl.us in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 24.129.129.220 Elapsed Time: 305 ms.
Testing TCP port 443 on host autodiscover.co.hernando.fl.us to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 120 ms.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 230 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.co.hernando.fl.us on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=webmail.co.hernando.fl.us, OU=COMODO SSL Unified Communications, OU=Domain Control Validated, Issuer: CN=COMODO SSL CA, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB. Elapsed Time: 174 ms.
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Host name autodiscover.co.hernando.fl.us doesn't match any name found on the server certificate CN=webmail.co.hernando.fl.us, OU=COMODO SSL Unified Communications, OU=Domain Control Validated. Elapsed Time: 1 ms.
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Elapsed Time: 338 ms.
Test Steps
Attempting to resolve the host name autodiscover.co.hernando.fl.us in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 24.129.129.220 Elapsed Time: 32 ms.
Testing TCP port 80 on host autodiscover.co.hernando.fl.us to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 139 ms.
The Microsoft Connectivity Analyzer is checking the host autodiscover.co.hernando.fl.us for an HTTP redirect to the Autodiscover service.
The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
Additional Details
An HTTP 403 forbidden response was received. The response appears to have come from Unknown. Body of the response: You do not have permission to view this directory or page.HTTP Response Headers:
Content-Length: 58
Content-Type: text/html
Date: Mon, 28 Jul 2014 20:46:30 GMT
Server: Microsoft-IIS/7.5
X-Powered-By: ASP.NET
Elapsed Time: 166 ms.
Attempting to contact the Autodiscover service using the DNS SRV redirect method.
The Microsoft Connectivity Analyzer failed to contact the Autodiscover service using the DNS SRV redirect method.
Additional Details
Elapsed Time: 80 ms.
Test Steps
Attempting to locate SRV record _autodiscover._tcp.co.hernando.fl.us in DNS.
The Autodiscover SRV record wasn't found in DNS.
Tell me more about this issue and how to resolve it
Additional Details
Elapsed Time: 80 ms.
Checking if there is an autodiscover CNAME record in DNS for your domain 'co.hernando.fl.us' for Office 365.
Failed to validate autodiscover CNAME record in DNS. If your mailbox isn't in Office 365, you can ignore this warning.
Tell me more about this issue and how to resolve it
Additional Details
There is no Autodiscover CNAME record for your domain 'co.hernando.fl.us'. Elapsed Time: 81 ms. -
Migrate exchange data from on-premise to Office 365
Hi,
I have a customer with Exchange 2007 server with around 300 mailboxes. The customer has decided to go to O365 with hosted email and they have setup DirSync to synchronise the AD users and password. However they would now like me to migrate the exchange mailbox
data from the on premise server to the cloud can anyone please offer any advise with doing this?Hi,
Base on my research, I recommend you refer to the following article to migrate the mailboxes:
Exchange 2007 cutover migration to the NEW Office 365
A cutover migration is the simplest way to get all your existing email into Office 365. As the name implies, it’s a cutover from one service to another. Cutover migrations are supported for Exchange 2003, 2007 and 2010; for organizations with fewer than
1000 mailboxes. The setup and process is straightforward and nothing complicated. With any successful migration, some planning and testing of existing infrastructure is invaluable. Make sure that you plan and test the migration prior to trying to implement.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Best Migration Method for Exchange 2007 with multiple accepted domains
We are trying to determine which method would be best for us as we migrate to O365. Scenario as follows:
1) Multiple accepted domains (each in their own OU in AD); example: domainA.com, domainB.com
2) Exchange is 2007; clients will be upgrading the Outlook 2013
3) Would like to be able to sync mailboxes starting anytime but be able to cut over a domain at a time.
Tested so far with staged migration but it appears that with this, there is a change in the TargetAddress sending all mail to the O365. Even changing MXs didn't redirect the message as it reaches the Exchange box and immediately goes to O365.
We haven't tried the cutover as we're only able to test with the production box and if that somehow cutover the entire box, we'd be .. well, it wouldn't be good.
Anyone had any experience so that our #3 point would be doable, that would be great.
Thx
GeorgeHi George,
According to your description, I understand that the issue is related to Exchange migration from Exchange 2007 to Exchange Online for Office 365. This forum focuses on some general discussion about Office 365 ProPlus which
is the version of Office that comes with many Office 365 plans. Therefore, I suggest we can post the issue in Microsoft Exchange Online (Office 365) forum for more professional suggestions:
http://social.technet.microsoft.com/Forums/en-US/home?forum=onlineservicesexchange
Hope you can find the solution soon.
Regards,
Winnie Liang
TechNet Community Support -
Error Extending 2012 R2 AD Schema for Exchange 2013 RTM/CU6/CU7 (for Office 365 attributes)
Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table -
I have gotten this error several times, but It works fine on most machines
Here is the most recent example of the log file:
Timestamp Process TID Area Category EventID Level Message Correlation
08/08/2014 11:28:29.131 SETUP (0xef8) 0x1964 Click-To-Run amaxp Medium BaseConfigure::TryGetConfiguration: EULA's have been accepted.
08/08/2014 11:28:29.134 SETUP (0xef8) 0x1964 Click-To-Run aoh85 Medium AdminConfigure::HandleStateAction: Configuring an install/crosssell scenario.
08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964 Click-To-Run aqdco Monitorable TryCheckNetworkCost::HandleStateAction: Failed to initialize NetworkCostManager for http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675.
Assuming low cost and proceeding.
08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964 Click-To-Run aoh9i Medium TryGetVersionDescriptor::HandleStateAction: Getting Cab: v64_15.0.4631.1002.cab
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwv6 Medium Descriptor::Load: Reading Available value from descriptor: 15.0.4631.1002
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run amawt Medium Descriptor::Load: Prereq Node exists. Being parsing it.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwv7 Medium Descriptor::Load: Reading Bootstrapper value from descriptor: 15.0
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run amax8 Medium TryGetVersionDescriptor::HandleStateAction: Descriptor contains Prereqs. Run them now.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anwwb Medium IsNativeValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8w1 Medium O15BetaValidator::CheckPreReq: Validator has version descriptor
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8w6 Medium O15BetaValidator::CheckPreReq: No Office 15 installation detected. Prereq check passes.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run an8xa Medium O15BetaValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964 Click-To-Run anwwn Medium SXSValidator::CheckPreReq: Cross bitness test passed.
08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anwwp Medium BootstrapperValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run an8w0 Medium ClientValidator::CheckPreReq: returning: 1.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anwwe Medium DiskSpaceValidator::CheckPreReq: Free disk space is sufficient.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run aoh9n Medium TryGetClient::HandleStateAction: Installation path is: C:\Program Files\Microsoft Office 15
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run amaya Medium TryGetClient::HandleStateAction: Looking for existing client.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run amayd Medium TryGetClient::HandleStateAction: Did not find an existing client. Downloading a new one.
08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964 Click-To-Run aon8l Medium TryGetClient::HandleStateAction: Getting Cab: i641033.cab
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run Telemetry amawv Medium MonitoredScope::ExecuteUnderStopWatch: TryGetClient::HandleStateAction: Getting Cab. Approximate duration: 499 milliseconds.
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run amaye Medium TryGetClient::HandleStateAction: Found C2R Client in extracted cab.
08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964 Click-To-Run aoh9t Medium TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675"
productreleaseid="none" culture="en-us" baseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" lcid="1033" platform="x64" version="15.0.4631.1002" updatebaseurl="\\server\share\Office365"
updatesenabled="True" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=499
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run apx75 Monitorable TryLaunchClient::HandleStateAction: C2R Client returned failing error code 17002
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run aoh72 Medium ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Click-To-Run aoh9z Medium AdminBootstrapper::Main: Installation came back with 17002.
08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964 Logging Liblet aqc99 Medium Logging liblet uninitializing.
Anyone have any ideas what is causing it?
I don't think it is permissions as I have seen on some forums because the share has read/execute permissions for domain users and domain computersHi,
Are you deploying Office 365 with the latest Office Deployment Tool? Try to download the latest version of ODT from below link, then try again:
http://www.microsoft.com/en-us/download/details.aspx?id=36778
A similar issue was resolved here, you might want to have a look:
http://social.technet.microsoft.com/Forums/en-US/eeb7b577-7868-487a-851d-a6d8c1c6bbda/office-c2r-installation-error-17002?forum=officeitpro
BTW, Microsoft Office 365 Community > Forums > Deploy Office 365
is a better source for this kind of problem and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Maybe you are looking for
-
How can I transfer all the notes entries on my iPhone to notes in iCloud?
I Have a load of notes on my iPhone 4s and when I checked they were not duplicated in my iCloud account. Strangely all of my contacts and calendar ARE there. IS there any way to copy this data into the cloud?
-
Can no longer delete scheduled or recorded programs using PC browser FIOS TV app
I've been using the PC browser application to control recordings and scheduling on my FIOS DVR for over a year now. As of this weekend, the DELETE and CANCEL functions on the Recorded and Scheduled Programs pages no longer function at all (if I clic
-
Implement custom.js in Generic Event Collector
Sentinel Log Manager 1.2 Collector: Generic Event Collector Hello, sorry for this low end question, but I'm going crazy. I try to implement a custom.js to get some data into CustomerVar fields. My problem, if I start with simple code and implement th
-
I have no audio when using Adobe Presenter. My daughter, on her MacBookPro, does have audio.
I'm trying to listen to a lecture on Adobe Presenter but there is no audio.
-
Need an alternative to rp-read-infotype to display infotype txts frm a BSP?
Hi All, I need to display infotypes maintained texts(F9) from a bsp. I created a test program to read these texts using rp-read-infotype and got it working but didn't realise i couldn't use this method in a BSP until i copied it in. total bummer! D