Exchange 2010 and Mavericks Push Email Support

Hi,
I am new to OS X and Mac, but not Apple.  I've searcehd high and low and can't find an answer to this question though I suspect the answer is "no" based on what I've been able to decipher from what I've experienced and read.
Should I expect push email capability with OSX Mavericks and Exchange 2010 using the Apple Mail application, or any other application for that matter?  It seems that the best I can do is fetch every one minute, but I am assuming that is not a very efficient method of checking mail, sepeciall on a corporate-sized email account.
I have an iPhone and an iPad and both of those receive push emails without question.  I am suspect this is because they use Activesync and the Apple Mail application does not.
Thank you,
Paul McGarr

I can confirm. I was able to add a corporate Exchange account to the OS X accounts handler before Mavericks and I assumed it was being pushed to mail.app since the account would show mail, contacts, calendar and tasks sync in the accounts handler. However, I always suspected there was problem with real "pushing" of email.
My work Exchange account email would arrive approx 1 - 5 minutes slower to mail.app than any other service. Email, calendar, contacts,tasks push was near instantaneous to Outlook 2011 on the same MacBook Pro, a PC with Outlook 2010, an iPad and an Android phone.
I believe the mobile devices defaulted to the Active Exchange Sync protocol on the server. I know that OS X doesn't support this but iOS does, so we can rule them out of the equation. You can see this when you add an Outlook.com account to an iOS device. It will push mail, contacts, calendars and tasks in real time if you send yourself a test email. OS X will only fetch mail and notes in the settings options.
I'm guessing there was always a problem with OS X using any Microsoft protocol to retrieve mail but it is FAR more obvious now. I bet Apple set standard corporate Exchange accounts to fetch and it never truly pushed anything. Of course the AES protocol has never been supported by OS X otherwise it would use it!
I can't receive Exchange email at all in Mavericks mail.app unless I manually press the check mail button now. Don't forget the server auto discover problems when on the work LAN vs at home.
I use Windows 7, OS X, Android and iOS devices frequently. I've been looking to commit to a single unified OS/application ecosystem. THE FIRST REQUIREMENT IS THAT THE SYSTEM SUPPORTS MY WORK EXCHANGE PUSH SYNC. I have multiple other accounts like outlook.com, yahoo.com, aol, Facebook, Twitter, LinkedIn, etc. I find OS X is the most intuitive with the account handling baked into the OS. I cannot make the commitment to commit to the Apple ecosystem when the default account handler doesn't support Exchange push.

Similar Messages

  • Mail is Slow between Exchange 2010 and 2013 During Co-Existance Transition

    Hello,
    I recently migrated from a single Exchange 2003 server to a single Exchange 2010 server
    I am now trying to Migrate from Exchange 2010 to Exchange 2013.
    I have a test user on Exchange 2013, and Internet Mail works fine and quickly both inbound and outbound.
    However, when I try and send between a 2010 user to my 2013 user, delivery takes around 10 minutes.
    On the 2013 server I see health check messages, and my 2010 user's message stuck in retry status. The messages eventually clear and the mail is delivered. Any ideas what is causing this delay?
    In terms of connectors I have all the defaults. And I created 1 for internal relays from devices. Which works fine.
    I have two Exchange 2013 servers configured in a DAG, but I don't have a load balance in place as of yet. So only server 1 is being accessed as the CAS.
    Thanks

    Hi,
    According to your description, the mail flow is slow only between Exchange 2010 and Exchange 2013 server. If I misunderstand your meaning, please feel free to let me know.
    If yes, I’d like to confirm if there are multiple NICs on your Exchange servers. And you can refer to the following thread:
    http://social.technet.microsoft.com/Forums/exchange/en-US/66f0629f-21fb-444b-b3f1-99ed8a4f52b2/slow-mail-flow?forum=exchangesvrsecuremessaging
    We have ONLY 1 network adapter, but if we select "All network adapters" instead of Hyper-V, we will get delays.
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Angela Shi
    TechNet Community Support

  • Exchange 2010 embedded images in email problem

    We have Exchange 2010 and the limit on our global settings and various send/receive connectors is 30720 KB everywhere for Max receive size & max send size.  Currently, even if the message size is well below the KB limit, if there are enough images
    embedded in the message the email is not delivered successfully. 
    For example, if there are 222 small attachments embedded in an email with the email message TotalBytes = 657358 (~658 KB), the email does not deliver and this is the error that is logged in Exchange:
    554-5.3.4 Content conversion limit(s) exceeded 554 5.3.4 STOREDRV.Deliver.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message The content conversion limit has been exceeded. ConversionFailedException: The
    content conversion limit has been exceeded. [Stage: CreateReplay]
    This appears to be a bug with the number of images and the fact that they are embedded into the message.  Is there a fix for this issue?  Or is there a setting in Exchange I can adjust to allow these messages to be delivered successfully?
    Thanks,
    Elizabeth

    Hi Rich,
    I configured tracing as suggested, and this is what I got:
    This message was not processed because it contains a large number of MIME bodies.
    Microsoft.Exchange.Data.Storage.ConversionFailedException: The content conversion limit has been exceeded.
       at Microsoft.Exchange.Data.Storage.InboundMimeConverter.ConvertToItem(MimePromotionFlags promotionFlags)
       at Microsoft.Exchange.Data.Storage.ItemConversion.ConvertAnyMimeToItem(Item itemOut, EmailMessage messageIn, InboundConversionOptions options)
    InboundConversionOptions:
    - defaultCharset: Microsoft.Exchange.Data.Globalization.Charset
    - trustAsciiCharsets: True
    - isSenderTrusted: True
    - imceaResolveableDomain: <DOMAIN REDACTED>
    - preserveReportBody: False
    - clearCategories: True
    - userADSession: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession
    - recipientCache: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientCache
    - clientSubmittedSecurely: False
    - serverSubmittedSecurely: True
    - charsetDetectionOptions: CharsetDetectionOptions:
    - preferredInternetCodePageForShiftJis: 50222
    - requiredCoverage:  100
    - preferredCharset:  null
    - convertReportToMessage:  False
    - headerPromotionMode: NoCreate
    - treatInlineDispositionAsAttachment:  False
    - applyTrustToAttachedMessages: True
    - resolveRecipientsInAttachedMessages: True
    - applyHeaderFirewall: False
    - ignoreImceaDomain: False
    - combineMixedContentBodies: True
    ConversionLimits:
    - maxMimeTextHeaderLength: 2000
    - maxMimeSubjectLength: 255
    - maxSize: 2147483647
    - maxMimeRecipients: 12288
    - maxBodyPartsTotal: 250
    - maxEmbeddedMessageDepth: 30
    - exemptPFReplicationMessages: True
    Thanks to all!  As previously mentioned, the ConversionLimits cannot be adjusted, so a work-around will be necessary for our scenario.

  • Error synchronizing folder [8004010F-501-8004010F-0] - Exchange 2010 and Outlook 2010, multiple users get dozens of these per day

    15:27:30 Synchronizer Version 14.0.6025
    15:27:30 Synchronizing Mailbox 'abc xyz'
    15:27:30 Error synchronizing folder
    15:27:30
     [8004010F-501-8004010F-0]
    15:27:30
     The client operation failed.
    15:27:30
     Microsoft Exchange Information Store
    15:27:30
     For more information on this failure, click the URL below:
    15:27:30
     http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=8004010f-501-8004010f-0
    15:27:30 Done
    kbj

    Hi,
    Please try below steps:
    - Remove all organizational forms libraries (subfolders under EFORMS Registry) if they are not needed, and re-create the Outlook profile of affected users.
    - Alternatively, if the organizational forms libraries are needed, remove the replica from Exchange 2010 and re-add it
    Best Regards!

  • Microsoft Exchange 2010 and Outlook 2013

    My colleagues computer suddenly crashed yesterday and it wouldn't restart without a system restore.
    Now when we try to open up Outlook it says that you must connect to Microsoft Exchange at least once before you can usse your Outlook Data file (.ost)
    Also The PC has lost the trust relationship on the domain
    We have exchange 2010 and the servers OS is Microsoft Windows Small Business Server 2011 and the Client PC is running off of Windows 8.
    Can you please help me resolve this issue?
    kind regards
    Steve Bradshaw
    [email protected]

    It might be possible that the MAPI key (which enables Outlook to synchronize with Exchange) has been deleted due to the System crash. So, in order to establish the connection, you need to Reconnect the OST file to the original MAPI profile and then reconnect
    then MAPI profile to Exchange Server. 
    If the above method fails to resolve the issue, then the best option for you would be to take the help of any professional OST to PST Conversion Software, which will help you to Extract data from your OST file and convert it to PST file which you can import
    back to your Outlook to establish the connection with Exchange Server again.
    You can check this
    presentation for more info.
     

  • Mail, Exchange 2010, and certificates

    Hi.
    The company I work for just upgraded their Exchange server to 2010 and all of a sudden my email account in Mail doesn't work anymore. In sheer desperation I tried to connect using Microsoft Outlook and the only way that I could create an account there was by submitting my certificate before entering my email account credentials. I get the feeling that this might be a kind of setting on the server side that someone turned on when we were transferred to Exchange 2010.
    In Mail, when I try to set up my Exchange account there is no way of submitting my certificate, or am I missing something? If not, does anyone know a way around this (by associating Mail with my certificate somehow – I don't know...)
    Many thanks in advance!
    /Cristian

    I added back the send connector on the 2010 exchange. everything still works fine since I still have the send connector on the 2003. However...
    I connected through telnet to server2 (the exchange 2010) and was able to mail internally. however I couldn't send mail externally, it gives me a "cannot relay" error when I enter my rcpt to:... command.
    I am guessing that this may be the reason why the queue is not emptying itself through that send connector.
    Anything else I could try to test my "send connector" on the 2010 exchange?

  • Exchange 2010 and 2003 Co-Existence Help

    Hi All,
    Hopefully someone out there can help me out.
    As the subject says i have exchange 2010 and 2003 in a co-existence mode. I have configured public folder replications and plan to use the following guide to move the public folders:
    http://careexchange.in/moving-public-folders-from-exchange-2003-to-exchange-2010/
    I was about the use the MoveAllReplicas.ps1 powershell script when I had the idea to dismount the legacy (2003) public folder mail store as a test to ensure the public folders had replicated. I noticed under the 'Queues' of the legacy exchange emails were queuing
    up withing 'Messages awaiting directory lookup'.
    All other mail stores were dismounted, as a test I mounted a database (non public folder), did a force connection and refresh. All the emails disappeared from this list.
    So my questions are:
    1. Why would my exchange 2010 sever still be routing emails via the legacy server?
    2. Why would the legacy exchange require a mailstore to be mounted for mail flow to work coming from the 2010 server?
    Thanks

    Thanks for the feedback.
    The issue I am facing is that the emails I am seeing queued are not related to the public folder replications. Emails for the public folder replications normally have a subject line of: 'Backfill' or 'Folder Content'.
    When all mail stores are dismounted on the legacy server some of the outbound emails sent by users who reside on the primary server (2010) are being sent to the legacy server. I can then see these emails queued and they will not be sent until a remount at
    least one mail store.
    E.g. All mailbox stores are dismounted on the legacy exchagn, John Smith's account is located on primary exchange (2010). John sends an email and I see it stuck in the queue on the legacy server  'Messages
    awaiting directory lookup'. 
    NOTE: This does not happen for all users, It seems to happen at Random.
    I also attempted to fix the issue by creating a new 'Send Connector' with a lower cost and defining the 'Source server as the primary server (2010)
    So the question still remains why are some outbound emails still being sent out via the legacy server even though these users are on the primary exchange?
    With regards to the public folders, I used the following to add the replicas between the legacy and primary exchange:
    .\AddReplicaToPFRecursive.ps1 -TopPublicFolder “\” -ServerToAdd “Exchange2010″
    When i dismount the public folders all the public folders are accisable via the 2010 server so it seems the replications have worked.
    Would the above command not have added the replicas to all the public folders including the system public folders?

  • Exchange 2010 and RMS

    Hello Team,
    We are running Exchange 2010 and RMS with Autonomy app which archives older than 30 day emails.
    Parent company is in Tokyo, all incoming email goes through them and then via a hub transport service delivers email to North America.  For some reason, emails are encrypted and the Archive app cant get to them.
    I just want to find how to proceed further and what to do to exclude emails to North America from it.
    Any suggestions would be appreciated !
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

    Hi Binu 
    I have written one for Exchange 2013 
    http://exchangequery.com/2014/08/12/steps-to-configure-irms-in-exchange-2013/
    Its the same for Exchange 2010 as well 
    Also you can follow the below article for references
    https://technet.microsoft.com/en-us/library/dd351035%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part5.html
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Primary mailbox (on Exchange 2010) and Personal Archive (on Exchange 2013), possible?

    Current environment is Exchange 2010 SP3 RU5 supporting 4,000 Users. Client estate is Outlook 2010 SP1 going on SP2.
    We're pulling our Archiving solution away from 3rd party and back into Exchange. Implementing a new set of Exchange 2010 Servers (old DAG or in a new Archive DAG) would be easy. But is there Exchange 2013 stepping stone potential?
    Can the Archive DAG / Archive mailboxes be on 2013? i.e. for any given User, leave their primary mailbox on Exchange 2010 and create new Archive mailbox on 2013.
    I want to avoid implementing 2010 Archive Servers and then go 2013 Archive 6 months or a year later.
    This article suggests 'no':
    http://technet.microsoft.com/en-gb/library/dd979800(v=exchg.150).aspx
    "Locating a user’s mailbox and archive on different versions of Exchange Server is not supported."
    I've found little info but the odd statement here / there.
    Is this the latest position? Is it that cut & dry? Anyone tried it? Why won't it work (or will it but it's not supported)?
    Thanks!

    <I had a response from MS>
    Below is a summary of the case for your records:
    Symptom:
    =============
    Is it possible to implement a 2013 environment to host the Archive mailboxes? i.e. for any given User, their primary mailbox is on Exchange 2010 and their Archive
    mailbox is on 2013. 
    Resolution:
    =============
    It’s not supported to have a user’s primary mailbox reside on an older Exchange version than the user’s archive. If the user’s primary mailbox is still on Exchange
    2010, you must move it to Exchange 2013 before or at the same time when you move the archive to Exchange 2013.
    http://technet.microsoft.com/en-us/library/jj651146(v=exchg.150).aspx
    as per the repro in our lab, having the archive mailbox in higher version of exchange would fail with the error above
    <the scenario isn't completely relevant, looks like he's trying to put the Primary on 2013 and not the Archive, no matter, we've established there are problems, question is whether they are looking into this area / to patch, they go on...>
    At this point in time we don’t have a conformation from the product team, if the above would change in the future exchange versions.
    <MS did say on the call that they were not looking at fixing it, naturally this isn't a "never", as per previous statement - they can't commit 100% to the future, but they've provided me the answer - they are not currently looking at resolving/providing
    this as a migration scenario, end.>

  • Exchange 2010 and iphone calendar sync issues

    Hey,
    I know this question has been asked plenty of times before and just need a straight resolution. We have just migrated our environment to Exchange 2010 and the major issue is that when an event is created in Outlook 2011 it is not always showing up on their iphone and also vis versa. Is their a resolution to this problem so I can implement it in an emergency change. Thank you for all your help!

    Here let me explain the scenario again any user who logs in to exchange from outlook working fine password not expired and he has iphone active sync working no issues , now while all devices are working when he starts his ipad after a week or so when he
    opens his email on ipad it prompts the password on ipad and same time on iPhone , he does not want to enter the password and wants a technical justification , I told the user something to do with Exchange 2010 sp2 and ios 7 ,but that is invalid justification
    . if you have any other valid justification please let me know. or a solution to this issue. user wants to login without any password prompt while the password is saved in device and not expired , is there any feature in Exchange 2010 sp2 that would recognize
    how many days device has not logged it and would force to enter the password.

  • Single name space in between Exchange 2010 and 2013

    Hi,
    In my current environment I have 2 Exchange 2010 servers with DAG no CAS NLB. I installed Exchange 2013 with 2 CAS with WNLB and 2 Mailboxes with DAG. The main requirement is to configure Single name space to access in between Exchange 2010 and Exchange
    2013. On Exchange 2010 DAG there is a URL using is owa.domain.com and I also configured in Exchange 2013 all the virtual directories with this name owa.domain.com but having an issue that when I open explorer and use the owa.domain.com URL the user on Exchange
    2013 gets their mailbox but user on Exchange 2010 gets error HTTP 403 blank page.
    I observed that in Exchange Organization settings CAS settings one server OWA, ECP etc shows their internal external URL but the other server unable to open the OWA, ECP URL and give error message that "An IIS directory entry
    couldn't be created. The error message is Access is denied. HResult = -2147024891"
    Please guide how to resolve this issue and use the same name URL in Exchange 2010 and Exchange 2013
    Thanks, 

    Hi,
    See the below brief:
    User will connect to mail.contoso.com as his namespace endpoint. CAS2013 in Site1 will authenticate the user, do a service discovery, and determine that the mailbox version is 2010 and is located within the local AD site. CAS2013 will proxy the
    request to an Exchange 2010 Client Access server which will retrieve the necessary data from the Exchange 2010 Mailbox server
    Go through the full blog for better understanding of the redirection.
    Client Connectivity with Exchange 2013
    Hope you have changed your DNS records to direct connections only to your new Exchange 2013 server. You'll move the host names (for example, mail.contoso.com) users have been using to connect to Outlook Web Access, Autodiscover, and so on, from your
    Exchange 2010 server to your Exchange 2013 server. When an Exchange 2010 user tries to open their mailbox, the Exchange 2013 server will proxy their request and communicate with the Exchange 2010 server on their behalf.
    Configuring DNS includes the following:
    Change the primary host names, such as mail.contoso.com, autodiscover.contoso.com, and owa.contoso.com (if used) to point to the external, publically-accessible, IP address of the Exchange 2013 Client Access server with your public DNS provider.
    Change the primary host names, such as mail.contoso.com (or internal.contoso.com if you're using different internal host names) and owa.contoso.com (if used) to point to the internal machine name of the Exchange 2013 Client Access server on your internal
    DNS servers.
    NOTE- Go through the Exchange Deployemnt Assitant - Configure DNS Records section
    Regards,
    Satyajit
    Please“Vote As Helpful”
    if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange 2010 and 2013 coexistence Internal and external URL

    Hi all,
    been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
    Still i dont get any smarter.
    Here is scenario:
    Exchange 2010
    Cas1
    Cas2
    Mailbox1
    Mailbox2
    Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
    Exchange 2013
    CAS+Mailbox
    Cas+Mailbox
    DNS
    mail.exchange.com pointing to VIP (kemp loadbalancer)
    Autodiscover ( pointed to same vip ,kemp load balancer)
    Outlook anywhere on all servers (2010 and 2013)
    Internal ( pointing to VIP on Kemp)
    External ( pointing to external IP,then it passes firewall that again passes to kemp)
    Problem we are having is when migrating users from Exchange 2010 - 2013.
    Users using Outlook 2010
    restart of outlook and mail  works fine.
    OWA works fine
    Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
    Users using Outlook 2013
    Outlook in disconnected status,only fix is to create new profile.
    OWA works fine
    Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
    Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
    Where is the config wrong?
    Thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    Hi Martina,
    did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
    Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
    Tried repair Outlook profile,no og.Only fix is to setup New account.
    Any more tips?
    thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

  • Exchange 2010 and iOS 7

    I am having multiple problems across multiple devices in Exchange 2010 SP2 and devices that upgraded to iOS 7.  I have reset all the settings and re-added the accounts. Any other solutuons for this issue that apple swears is not a bug in the iOS?

    I am running Exchange 2010 and have iOS7 on my phone, and have not seen any problems. My phone is not managed by configuratior.
    What problems are you having?

  • TS3276 i am having trouble with my exchange emails. I use the latest exchange 2010 and am having trouble downloading all my emails on the macbook

    I use a microdost exchange 2010 in my office.  I just bought a macbook pro and try to syn my office mail.  While it has been set up properlly and it has started downloading some of my older emails, it is taking very long and does not download all the mails especially the new ones.  The ones it has downloaded take a long time to load and open.
    I bought the laptop to use it on the go. What is the solution? Please help.
    Thanks.

    Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    If the startup disk is not available from that window, you may be able to repair the disk.
    Help here >  A flashing question mark appears when you start your Mac

  • Exchange 2010 and 2003 coexistence - all email from 2010 flowing through 2003

    So I have a coexistence set up and running perfectly. However, all emails sent from mailboxes on the 2010 server are being routed through the 2003 server (even for external accounts). Is this a cost issue with the routing group connector I setup between
    the two?
    TIA!

    Add a new send connector in Exchange 2010.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Maybe you are looking for

  • Jabber for Windows 9.2 and iLBC ?

    We run iLBC across our wan between sites. Does Jabber for Windows 9.2 or a newer version of Jabber for Windows support iLBC?  I can't find details in the Data Sheets about what codecs Jabber for Windows supports.

  • Assignment 3

    Hi can anyone help me with this error. I am getting this error in F-43, when i am trying to post. I will assign points on anyinput. Contact your system administrator (table error) Message no. AA824 Diagnosis No accounts have been entered for deprecia

  • Making a field on the SCSM 2012 Change form a required field?

    I've got an oldie but a goodie... Are there any good instructions / example articles, for how to make a field mandatory? I understand I need to use Visual Studio to create a control. From here I need to make a DLL and bundle it in an Management Pack

  • Export completed PDF Form to New PDF ???

    Hello, I have a USPS PDF that is filled out complete with all the needed information such as names, dates, weight, and so on. This is from July 2009, the USPS just came out the exact same form for 2010 and I want to know if there is a way to export t

  • Shared JNDI view among security role

    Hi, We're working on project which needs to expose EJB across different Apps( EAR) in the same OC4J. To my knowledge, in order for those Apps to be able to access the JNDI entry for the exposed EJB, there could be follwing options. * To enable JNDI e