Exchange 2010 - Clustering & DAG problems after restoring CLUSTER from domain

Hi there!
SITE 1
Primary EXCHANGE server (2010SP3 with latest CU) with all the roles installed
SITE 2
Secondary Exchange server (2010SP3 with latest CU) with only mailbox role for DAG purpouse.
SITE 1 and SITE 2 are connected with site-to-site-vpn.
Both servers are on 2008 r2 ENT.
About 3-4 months ago we have accidentely delete DAG node from domain. We have managed to restore it from domain with using AD RESTORE and checking that DAG is member of all the required Exchange groups in the domain.
Now we are having some big problems if site-to-site-vpn dropps, our primary Exchange server in SITE1 is not working.
If VPN dropps between the sites, OWA gets unavailable as it Exchange servers would think that Exchange in SITE2 is primary server.
Please advice us how to track and repair the root of the problem.
With best regards,
bostjanc

Running command:
Get-MailboxDatabaseCopyStatus –Server "exchangesrvname" | FL MailboxServer,*database*,Status,ContentIndexState
Gives as an output that all the databases are healthy:
Example of 1 database report:
MailboxServer      : ExchangeSRVname
DatabaseName       : DatabaseName1
ActiveDatabaseCopy : exchange2010
Status             : Mounted
ContentIndexState  : Healthy
Running command:
Test-ReplicationHealth –Server "exchange2010.halcom.local" | FL
Also gives output that everything is fine.
We still need to solve this issue so we will be unmarking the thread being ansered.
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ClusterService
CheckDescription : Checks if the cluster service is healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ReplayService
CheckDescription : Checks if the Microsoft Exchange Replication service is running.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ActiveManager
CheckDescription : Checks that Active Manager is running and has a valid role.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : TasksRpcListener
CheckDescription : Checks that the Tasks RPC Listener is running and is responding to remote requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : TcpListener
CheckDescription : Checks that the TCP Listener is running and is responding to requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ServerLocatorService
CheckDescription : Checks that the Server Locator Service is running and is responding to requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : DagMembersUp
CheckDescription : Verifies that the members of a database availability group are up and running.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ClusterNetwork
CheckDescription : Checks that the networks are healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : QuorumGroup
CheckDescription : Checks that the quorum and witness for the database availability group is healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : FileShareQuorum
CheckDescription : Verifies that the path used for the file share witness can be reached.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
bostjanc

Similar Messages

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

  • Error 150:30 after restoring CS4 from Time Machine backup

    I just got myself a new Imac with OS X Maverick and set it up using a time-machine-backup. My Adobe CS4 now has a Problem with the license and shows me error: 150:30?
    Do I need to uninstall CS4 and reinstall? Is there any easier solution to this problem?
    Thank you anyone for some help.
    chris

    Thanks a lot for your help......everything back to normal after reeinstallation.
    chris
    Am 29.09.2014 um 23:28 schrieb John Waller <[email protected]>:
    Error 150:30 after restoring CS4 from Time Machine backup
    created by John Waller in Adobe Creative Cloud - View the full discussion
    Do I need to uninstall CS4 and reinstall?
    Unfortunately yes.
    Also run the Cleaner Tool prior to reinstalling
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Restoring from Time Machine backups invariably breaks the activation mechanism (Error 150:30) and there's no easy way to fix a 150:30 error other than via re-installing.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6775090#6775090
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problem with restoring database from backupset

    Hello,
    I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
    I've restored controlfile, but I couldn't restore database - it fails with:
    RMAN-00571: =============================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
    RMAN-00571: =============================================
    RMAN-03002: failure of restore command at 08/31/2006 12:06:47
    ORA-01180: can not create datafile 1
    ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
    List of backupsets from restored controlfile
    (I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    36 Full 6.98M DISK 00:00:02 29-AUG-06
    BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    37 Full 322.96M DISK 00:00:27 29-AUG-06
    BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    List of Datafiles in backup set 37
    File LV Type Ckp SCN Ckp Time Name
    1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
    2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
    3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
    4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
    BS Key Size Device Type Elapsed Time Completion Time
    38 650.50K DISK 00:00:00 29-AUG-06
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    List of Archived Logs in backup set 38
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 32 577277 29-AUG-06 578529 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    39 Full 7.02M DISK 00:00:00 29-AUG-06
    BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
    SPFILE Included: Modification time: 28-AUG-06
    I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
    Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
    Output of command restore database validate:
    RMAN> restore database validate;
         Starting restore at 31-AUG-06
         allocated channel: ORA_DISK_1
         channel ORA_DISK_1: sid=102 devtype=DISK
         data file 1 will be created automatically during restore operation
         data file 2 will be created automatically during restore operation
         data file 3 will be created automatically during restore operation
         data file 4 will be created automatically during restore operation
         restore not done; all files readonly, offline, or already restored
         Finished restore at 31-AUG-06
    What's wrong?
    Thanks
         Paul

    Hi,
    I think, that everything seems to be OK.
    Commands which I use to validation of existence backup:
    RMAN> crosscheck backup;
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=102 devtype=DISK
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
    Crosschecked 4 objects
    RMAN> list backup summary;
    List of Backups
    ===============
    Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
    36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
    37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
    38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
    39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
    RMAN> list backup;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    36 Full 6.98M DISK 00:00:02 29-AUG-06
    BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    37 Full 322.96M DISK 00:00:27 29-AUG-06
    BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    List of Datafiles in backup set 37
    File LV Type Ckp SCN Ckp Time Name
    1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
    2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
    3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
    4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
    BS Key Size Device Type Elapsed Time Completion Time
    38 650.50K DISK 00:00:00 29-AUG-06
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    List of Archived Logs in backup set 38
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 32 577277 29-AUG-06 578529 29-AUG-06
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    39 Full 7.02M DISK 00:00:00 29-AUG-06
    BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
    Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
    SPFILE Included: Modification time: 28-AUG-06
    RMAN> restore database validate;
    Starting restore at 04-SEP-06
    using channel ORA_DISK_1
    data file 1 will be created automatically during restore operation
    data file 2 will be created automatically during restore operation
    data file 3 will be created automatically during restore operation
    data file 4 will be created automatically during restore operation
    restore not done; all files readonly, offline, or already restored
    Finished restore at 04-SEP-06
    Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
    If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
    C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
    Volume in drive C has no label.
    Volume Serial Number is E003-9FC6
    Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
    29.08.2006 11:38 <DIR> .
    29.08.2006 11:38 <DIR> ..
    29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    4 File(s) 354 036 736 bytes
    2 Dir(s) 56 865 202 176 bytes free
    C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
    C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
    4 file(s) copied.
    Thanks
    Pavel

  • Can't send and receive SMS/MMS/iMessages after restoring iPhone from a backup

    I can't receive and send any type of messages with my iPhone 3GS (iOS 6.1.6) after restoring it from my old backup (also 6.1.6).
    Messages that I'm sending are disappearing immediately after the moment they are sent and they are never delivered. The first time I restored my iPhone I could send and receive messages for 1 day, and I couldn't do it on the next day. This time I was able to send and receive messages for 10 minutes.
    I have used the methods Apple recommends for problems like this, but it doesn't help.

    Hello StepanyanMuradyan,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with not being able to send or receive messages on your iPhone, I'd like you to please follow the troubleshooting outlined below.
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    iOS: Troubleshooting Messages - Apple Support
    Take care,
    Alex H.

  • After restore backup from time machine, all thumbnails in photos are blank. How to fix ?

    After restore backup from time machine, all thumbnails in photos are blank. How to fix ?
    I'm using Yosemite 10.10.3 and Photos. i have tried repair database, but no success .

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Exchange 2010 SP3 DAG Flip Flop File Share Witness Issue

    Hi All,
    We are facing one strange issue with Exchange 2010 SP3.
    Our environment is as below
    a single DAG spanned accross 2 AD sites with 6 MBX server.
    Each site have 3 MBx server.
    File Share Witness is on Hub server in primary site.
    Note: The DAG IP is from Primary DC VLAN and which cant be streched accross DC due to network restrictions/limitations.
    It was working fine till date.
    But, yesterday onwards we are facing issue.
    All DB dismounted and DAG name disappear from EMC and while doing refresh its giving error as below
    Exception type: Microsoft.Exchange.Data.DataValidationException
    Exception message: Could not convert property WitnessServer to type UncFileSharePath. Error while converting string 'vesthub700.mydomain.com\DAG1.mydomain.com' to result type Microsoft.Exchange.Data.UncFileSharePath: "vesthub700.mydomain.com\DAG1.mydomain.com"
    is not an acceptable path. You must use an absolute, local, long file path, that doesn't contain '~', or a UNC path. Parameter name: path
    We are not able to execute any cmdlets related to databaseavailabilitygroup from EMS and its giving same error.
    Failover Cluster DAG resource is Flip/Flip continuously.
    Its only become stable after reboot of the hub server holding FSW and the 1st mailbox server.(Cluster Owner)
    We are even not able to move cluster group to different server.
    Performed ExBPA no such issues found which related to DAG.
    Performed clsuter validation.
    Only generic cluster events in Mailbox servers.
    Observation:
    Its only become stabe if we remove the msExchFileShareWitness Value for DAG1 using ADSIEdit.
    And the problem recurs if we set it back again.
    Any help or suggestion is appreciated.
    Thanks,
    soumen
    Soumen Ghosh

    Hi Belinda,
    Thanks! I have checked the Mailbox Server Application Log and found few 2155 Event Id generated at the time of the issue occured.
    Process Microsoft.Exchange.ServiceHost.exe () (PID=9312). Configuration object CN=DAG1,CN=Database Availability Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=xxxxxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=mydomain,DC=com
    read from DCTDK35.mydomain.com failed validation. DataValidationException will be thrown. Set event logging level for Validation category to Expert to get additional events about each failure.
    One update is that the DAG is stable now after we set an alternate FSW last night.
    Regarding the 2nd IP assignment for DAG for the 2nd subnet, we have gone through technet and other sites which refering to add the same from EMC or EMS.
    Is it sufficinet to simply adding the 2nd IP to DAG from EMC or EMS? Or do we need to take any other special consideration.
    Also, adding another IP it will create one more IP address resource to Failover Cluster, but I belive at a time both the IP wont be online. Do we need to keep it offline manually or its automatically taken care by Exchange.
    Please suggest.
    Also, regarding executing the CollectOverMetrics.ps1 we are following
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/monitoring-operations/monitor-dag-database-failover.html
    but failed to execute. Can you suggest the correct parameter.
    Thanks,
    Soumen
    Soumen Ghosh

  • Exchange 2013 sp1 DAG problem on Wondows 2012 r2

     Hi,
     I have configured this on my servers. It seems to be working almost 100%.
     When I look at  server-databeses in ecp  I see the DB is healthy both active and psssive.
     When I run  this (Get-DatabaseAvailabilityGroup) | ForEach {$_.Servers | ForEach {Test-ReplicationHealth -Server $_}}
     I get DatabaseAvailabilty   FAILED  on  both  active and passife  DB.
     When I Switchover to the other sever I get no errors  but in ca. 2 min it Switches back.
     If I try to move mailbox from Exchange 2010 sp3 to  Exchange 2013 sp3 I get 
    Data migrated: 1.327 GB ‎(1,425,379,174 bytes)‎
    Migration rate: 0 B ‎(0 bytes)‎
    Error: MigrationPermanentException: Error: Mailbox changes failed to replicate. Database 18475dc2-2111-4da6-854b-6583d42c9279 doesn‎'t satisfy the constraint SecondCopy because the commit time 3/12/2014 12:17:49 PM isn‎'t guaranteed by replication
    time 1/1/0001 12:00:00 AM.
    I admit that I had this configured before I installed SP3 :( Do I need to delete the DAG and create it again?
    thanks.
    Erró

    Hello,
    Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about one or more mailbox database copies.
    Based on your environment, please set DataMoveReplicationConstraint to None to check the result.
    Set-MailboxDatabase "mailbox database name" -DataMoveReplicationConstraint None
    After you have done the move, please set DataMoveReplicationConstraint to SecondCopy again.
    Set-MailboxDatabase "mailbox database name" -DataMoveReplicationConstraint SecondCopy
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

    Hi,
    i have problem with Outlook Uses who have Full Access on other mailbox.
    An authentication window pop up very time a user start Outlook.
    If i remove the access everything is ok.
    if i insert manual the mailbox everything is ok
    The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
    Before the update, was no issue.
    i will appreciated any help
    Thanks

    Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
    Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
    What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
    Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
    the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
    I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
    This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

  • Exchange 2010 SP2: Different problems with E_ACCESSDENIED on exchange servers

    Hello All,
    I'm observing a strange problem in an AD 2008 R2 / Exchange 2010 SP2 environment:
    When creating a DAG and adding 1 or more servers to the DAG, the following error occurs:
    Summary: 2 item(s). 0 succeeded, 2 failed.
    Elapsed time: 00:00:05
    <MAILBOX SERVER 1> Failed
    Error:
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 1>' -Identity '<NAME DAG>'
    Elapsed Time: 00:00:02
    <MAILBOX SERVER 2> Failed
    Error:
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 2>' -Identity '<NAME DAG>'
    Elapsed Time: 00:00:02
    There are no logs created on the Mailservers, so I have no more detailed information. Where to start with troubleshooting this issue?
    Edit: BTW I already checked the local admin membership of the "Exchange Trusted Subsystem" domain group.
    Also commands like get-owavirtualdirectory give the Access Denied error (except on the CAS servers themselves).
    You know you're an engineer when you have no life and can prove it mathematically

    Hi Frank,
    The DAG is not yet populated. When inserting the first server(s) in the freshly created DAG, the error appeared.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup
    Name             Member Servers                                     
    Operational Servers
    IICT-DAG-002     {}
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup IICT-DAG-002 -Status | fl
    RunspaceId                             : cc985264-fa89-48f8-8aba-c1b0c89eb097
    Name                                   : IICT-DAG-002
    Servers                                : {}
    WitnessServer                          : iict-srvp00-011.insourceict.local
    WitnessDirectory                       : C:\IICT-DAG-002
    AlternateWitnessServer                 :
    AlternateWitnessDirectory              :
    NetworkCompression                     : InterSubnetOnly
    NetworkEncryption                      : InterSubnetOnly
    DatacenterActivationMode               : Off
    StoppedMailboxServers                  : {}
    StartedMailboxServers                  : {}
    DatabaseAvailabilityGroupIpv4Addresses : {10.100.0.54}
    DatabaseAvailabilityGroupIpAddresses   : {10.100.0.54}
    AllowCrossSiteRpcClientAccess          : False
    OperationalServers                     :
    PrimaryActiveManager                   :
    ServersInMaintenance                   :
    ThirdPartyReplication                  : Disabled
    ReplicationPort                        : 0
    NetworkNames                           : {}
    WitnessShareInUse                      :
    AdminDisplayName                       :
    ExchangeVersion                        : 0.10 (14.0.100.0)
    DistinguishedName                      : CN=IICT-DAG-002,CN=Database Availability Groups,CN=Exchange Administrative Gro
                                             up (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=InsourceICT,CN=Microsoft Exch
                                             ange,CN=Services,CN=Configuration,DC=insourceict,DC=local
    Identity                               : IICT-DAG-002
    Guid                                   : 71d5d869-03ac-4f8a-8de7-fc15bc6a0ae1
    ObjectCategory                         : insourceict.local/Configuration/Schema/ms-Exch-MDB-Availability-Group
    ObjectClass                            : {top, msExchMDBAvailabilityGroup}
    WhenChanged                            : 8-6-2012 14:35:59
    WhenCreated                            : 8-6-2012 13:35:21
    WhenChangedUTC                         : 8-6-2012 12:35:59
    WhenCreatedUTC                         : 8-6-2012 11:35:21
    OrganizationId                         :
    OriginatingServer                      : IICT-SRV003.insourceict.local
    IsValid                                : True
    You know you're an engineer when you have no life and can prove it mathematically

  • Problem booting Lion after restoring disk from Time Machine

    I have a late 2009 iMac which I have upgraded to Lion, having created a bootcamp partition with Windows Server 2008 before upgrading.
    This has been working absolutely fine for a few months but then there appeared to be some kind of hard disk problem and booting would only go as far as a gray screen with apple logo and a progress bar, then shut itself down. I started into the recovery partition by holding down the Alt key and from there (after reading around the internet a bit) was able to reformat the OS X partition and restore it from my Time Machine backup (wireless to Time Capsule).
    However it now won't boot, initial grey screen with Apple logo and spinning progress meter then restarts into Recovery HD. In Recovery mode Disk Utility reports all appears to be OK with the disk - there were some errors before I restored from Time Machine, but Disk Utility was able to repair them.
    If I hold down Alt on booting I get the 'choice of boot disks' screen with EFi boot, Windows and Recovery HD. If I choose EFi boot I get the Apple symbol alternating with a circle with diagonal line (prohibitory?) a couple of times, then it boots into Recovery. If I boot the computer with the Shift key it successfully boots into Windows, but won't boot into Windows from the 'choice of boot disks' screen.
    Is my problem that I need to somehow 'make' the restored partition bootable and if so how, or is there a more fundamental problem here, either with my hard disk or (gulp) with my Time Machine backup?
    Any ideas much appreciated, thanks
    -Chris

    Can't see SMART status anywhere in Disk Utility, shouldn't it just be visible at the bottom of the window when I click on the disk? Verify disk returns OK. I do have the correct format option.
    I am now trying Tony T1's suggestion of trying again, but this time on Erase... I have chosen the Security Option that writes 0's over the whole partition to see if it throws up any signs of failure.
    Thanks for your suggestions.

  • Time Machine problem after restoring to a new HD (after my original HD failed)

    I am running Lion 10.7.5 on a MacBook Pro Late '11
    My HD was getting SMART errors, so I did a complete back up using Time Machine using a WD My Passport 1TB external, and then sent my MBP to Apple for HD replacement (under my Applecare plan).
    I collected it yesterday and restored my system using Time Machine (using the data from my external HD) and everything was restored perfectly, which was great,
    However, I'm now encountering a problem after plugging my external HD back into my MBP on the new system. Rather than Time Machine doing a swift 'top up' back up, it appears that TM is attempting to do a full back up. (I have 300GB and it took nearly 24hours to backup on the faulty drive) Is this normal after installing a new HD? Bearing in mind the Time Machine data is still on my external drive?
    It's also appearing to be taking FOREVER to do this entire back up again. It is stuck on 'preparing back up' and when I do get some movement, it's doing a couple of KB's at a time and with no genuine back up progress.
    Fundamentally, I just want to just top up my Time Machine back up without having do a complete back up, again. (which doesn't actually seem possible, viable at the min)
    Any help / support would be much appreciated

    AFAIK, it'll do that since the HD has a different UUID and the old TM backup won't recognize it. See Pondini's TM FAQs, for starters.

  • After restoring 5S from 5, notifications from many news APPs don't work (no problem with my iphone 5 running iOS 7.0.2)

    I used iphone 5 and have updated it to iOS 7.0.2. Everything worked with it. I can receive all the notification from news APPs.
    After receiving iphone 5s, I set it up by restoring the backup from iphone 5. However, not all APPs were synced. Also, many notifications are not working especially with the news APPs I was using.
    The notification of those APPs affected are turned on in the notification center.
    I have restored iphone 5S to factory setting and set up again, but still not all the notifications are working.
    What should I do?

    A workaround is to reinstall lazy apps, mostly for those that were restored but don't appear on notification center, eg. Whatsapp. In my case I have more than 500 apps installed.
    We need a correct solution for this problem.
    I also had this problem on the past moving from 4s to 5.
    And now from 5 to 5s.
    The only notifications working after restore in my iPhone are those from Facebook.

  • Moving Exchange 2010 Production DAG Setup and Servers to difrent Date Center with new IP Addresses

    My Setup
    Exchange 2010 SP3 2 Mailbox, 2 Hub/CAS, 2 TMG Servers in Production
    Exchange 2010 SP3 2 Mailbox, 2 Hub/CAS, 2 TMG Servers in DR Site
    Exchange 2010 DAG implemented with site level redundancy
    Requirement
    Need move Production Exchange setup along with DAG configuration to a new location.
    IP Addresses for servers and DAG setup will change
    No change in Server name and DNS names
    During production server movement Mail services will be activated from DR Site
    Need help in planning and executing the IP Address change/DAG Change
     and Server movement.
    Kumar K S

    Hi,
    I will have the following plans:
    1. Active the DR site as the main site during the migration.
    2. Moving the Server to the new site
    3. Change the activate back to the Production Servers
    https://social.technet.microsoft.com/Forums/exchange/en-US/fb9a27c3-81f8-4079-aeb8-42119b1e23bf/changing-ip-address-of-exchange-server
    Thanks,
    Simon Wu
    TechNet Community Support

Maybe you are looking for

  • Derive week number of that month

    Hi, I need to derive week number based on month. Ex: Sy-datum = 10.10.2010 Month: 10.2010 Calweek: 40.2010 Week no: 2 Sy-datum = 11.10.2010 Month: 10.2010 Calweek: 41.2010 Week no: 3 So for everymonth I need to store the week no in the cube Ex Date--

  • Windows 8.1 installation interrupted

    I was installing win8.1 from win8 windows store,everything was going OK during installation but suddenly black screen occurred.after an hour I forced restart my laptop and the message occurred "windows getting ready don't turn of your computer" after

  • Restore Macintosh 6400-200

    Hello all,                I have 2 Macintosh Performa 6400/200, 1 of them is working ok, the other one is showing  a Floppy disk with a question mark this is the one I'm trying to fix and I need some help. I google searched for solutions, found this

  • Open Batch file during Runtime

    How Can i execute a batch file from java program.? my batch file only have this command """" java Server"""" Server is the name of my java file application.

  • Command line - Set default app

    Can someone tell me how to change the default ftp helper application for OS 10.5 via the command line? Thanks!