Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay
Hello. First of all, thank you very much for your attention.
After that, I will expose the problem:
I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
. This user
has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default email "[email protected] ".
On
the other hand,
another domain user
called
"menganito" with it's mailbox "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
...having
as default email "[email protected]
The user "Comercial" is forwarding
all of it's mails to the user "menganito".
The problem is that "menganito" is not receiving the exact
"comercial"
sender email, but the email which appears by default ("[email protected]").
"Menganito" would like to know
from which email exactly the mails he is receiving have been sent ("[email protected]",
or "[email protected]"
or "[email protected]").
Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
have received the email from.
In another type of email servers (Kerio,...)
this is not a problem, because forwarding by
defaultis always showing
the original sender and original receiver.
Maybe the problem comes from the recipient type I'm using.
Should I use another type of recipient? should I use a transport rule?
Any idea ? Thanks again in advance.
Hi Simon. First of all thanks for your answer.
This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
The problem is
when "[email protected]"(default
and set as default answer
account by
exchange)
receives
a message in "[email protected]" when
forwards to "Menganito"
this message will appear from"[email protected]"
instead of "[email protected]".
This happens with all accounts.
I can understand that i can't avoid
default reply address on the same
domain, but also with different domains happens
the same?
The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure. After, in powershell, i put this:
Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
-Restart
The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
Thanks again.
Similar Messages
-
Using Tiger 10.4.7 with AD 2003 and problems with rq'd Password Change
I have been able to successfully change my password 4-5 times before in my scenario using Tiger v-.2->.6 and have never had a problems.
Now I just changed my old expired password, as req'd from the AD policy, to my new Password on my XP box and have a Mobile account on my Powerbook that won't let me in now using my new Password. It says I am unable to use this <name> account at this time. Is there a propogation time to pass?
Local Admin account on PB can sign in fine- My alternate Systems Admin account <mobile> can sign in as well fine. Other local accounts work well as well.
As a mobile account I cannot change my password without being connected to the AD network at this point (no access through local System Prefs). Has anyone ever experienced this? Or is everyone still shying away from Mobile accounts usage and Homesync (Works great on my machine - problems with other accounts/computers)- I'm sort of a Mac/AD Daredevil here in XP-land, since we only really support Macs because our CEO won't (refuses to) use XP and I am a Jedi Knight inside the Dark Star (Just learning XP/AD to get steady work).
Anyone out there have anything to add/suggest? THXThe admonition not to use the Tiger install disk utility only applies to repairing permissions. You can use Disk Utility from the install disk for verifying and repairing your hard drives. However, with Tiger, you can now verify your boot drive with Disk Utility from your boot drive itself (this only works if you have disk journaling turned on and it's on by default). If the drive would need any repairs then you would have to boot from the installation disk to repair it.
Disk Warrior is probably the best hard drive maintenance utility in the entire Macintosh universe and it works fine with Tiger. Just make sure you have the latest version which is 3.0.3 I believe.
In my opinion the iLife suite of programs is absolutely essential for the complete Macintosh/OS X experience. There's nothing like it on any other platform, period. It's a true work of excellence.
You will enjoy the stability and compatibility of Tiger especially when on the Internet. The latest version of Safari is the best yet.
Dual 2.5GHz G5 Power Macintosh Mac OS X (10.4.7) 1.5GB RAM 20" Apple Cinema Display -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??
If there is a problem with your AppleID, you - and not the provider - must
straighten out the matter.
AppleID disabled:
http://support.apple.com/kb/TS2446
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action -
Workflow with item type and item key is in progress. Abort existing workfl
Dear all,
I'm using the below code from the submit button event to launch the workflow. The workflow works fine when I submit for the first time, when i try to submit for the second time from the same session it throws me the error as Workflow with item type and item key is in progress. Abort existing workflow.
Where I am struck,Kindly send me any solution.
I am using below code in oaf
public void workflow(OAPageContext pageContext,
String headerId,
String empName,
String userName
String wfItemType = "XXSample";
String wfProcess = "XXSample";
String wfItemKey = headerId;
OANavigation wfClass = new OANavigation();
// Create Workflow Process
wfClass.createProcess(pageContext, wfItemType, wfProcess, wfItemKey);
System.out.println("Workflow created");
wfClass.setItemAttrText(pageContext,
wfItemType,
wfItemKey,
"XXHDRID",
headerId);
wfClass.setItemAttrText(pageContext,
wfItemType,
wfItemKey,
"XXEMPNAME",
employeeName);
wfClass.setItemOwner(pageContext, wfItemType, wfItemKey,username);
wfClass.startProcess(pageContext, wfItemType, wfProcess, wfItemKey);
System.out.println("Workflow started");
Thanks,
Kumar.Item type and item key forms unique record for the workflow session, you cannot have 2 instances of the workflow running for the same header id, in your case. Check if the process exists for the header id. If so, display a warning message without launching another workflow session, else start the workflow process.
Thanks
Shree -
Any experience with Object Types and Forms6i / 9i ???
Has anyone got any experience in working with Object Types and Object Views together with Forms 6i or 9i???
TIA
Rob ZoeteweijHi AnneCarmen,
Check this small video, http://project02.businesscatalyst.com/Jing/2012-07-13_0508.swf
This is just an example where I am trying to demonstrate how the html embedded into the frame sticks to only one image and not to all the other images. Also, how to keep the thumbnails. Under menu options you can modify the transition and speed option as per your need.
Regards,
Abhishek Maurya -
How to create recipient type and communication route for T code S023
Hi Can any body help me create new recipient type and communication route in T code S023,
Quick responce is greatly appreciated.
Cheers
RajeevYou can just right click on the distribution List. Click on Change button. From here you can click on the respective Recipient Type and populate the Distribution list.
Thanks
Arghadip -
Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
Gautam.75801Hi,
We may need to create script based rule using PowerShell or VBScript.
Please go through the below links for command get-mailboxstatistics:
Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
Regards, Yan Li -
Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?
Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works -
Hello, I have an iphone 4 and it has recently come up with the connect to itunes logo. When I connect it to my computer, itunes comes up with there is a problem with your iphone. What should i do? I need help ASAP
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Code works with Dreamweaver CS6 and not with CC
<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC. -
3px framed picture on a Web page with Internet Explorer and Google Chrome appears normal, but Firefox is on the right side frame 9px. Why?
I'm not seeing this.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
Can you attach a screenshot?
* http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB). -
I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas
pacull,
Use iCal>View>Show Notifications to choose what to do with the notification. -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.
I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.
Maybe you are looking for
-
ACE - timeout inactivity problem
Hi All, I've got a strange problem with session counts and timeout on an ACE (2.1.3). I created a connection parameter-map to an existing configuration, added it to the load-balance configuration and then removed and re-added the service policy. The
-
How to Convert an existing window into an HTML page
Hi, I am trying to convert a window into an HTML page using Forte Web Enterprise. - The window has just the widgets without any code behind it. - How can I use the WindowConverter class, WindowToDocument method for it etc..... Any suggestions? Can I
-
Decimal format to 2 decimal places ????
Hello Everyone, I have created a web dynpro application which to display a report depending on the data given by the BAPI. But there is some issue with the numeric data returned by the BAPI. For ex - if the BAPI returns 5.00 the value is displayed in
-
Communiocation channel: Value with name asmaBaseFileName not available
Hi friends, After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels from Communication channel monitoring. I am getting error for all the channels as follows : Configuration error: Value with name asmaBaseFileName not
-
it doesn't give me the option to look for another computer to homeshare with