Exchange 2010 ECP Access Problem with reconnected Mailbox (RBAC)

Hello,
We have the following problem with one mailbox of our 90. (This mailbox has been deleted 1 week ago and was reconnected to the AD User)
The user can successfull access to OWA, but can't access to his "Options" (/ecp/). It appears a "permission denied" message.
In the eventvwr we see the following events:
Event ID: 17 Source: MSExchange Configuration Cmdlet - Management Shell
(Process w3wp.exe, PID 5456) "RBAC authorization returns Access Denied for user XXXX. Reason: No role assignments associated with the specified user were found on Domain Controller XXXX"
Event ID: 4 Source: MSExchange Control Panel
Request for URL 'https://XXXX/ecp/default.aspx' failed with the following error:
Microsoft.Exchange.Configuration.Authorization.CmdletAccessDeniedException: The user "DOMAIN\XXXX" isn't assigned to any management roles.
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.LoadRoleCmdletInfo(ADRawEntry user, ADRawEntry userToVerifyInScope, ADSystemConfigurationSession session, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, List`1 implicitRoleIds, RoleFilteringMode roleFilteringMode, Dictionary`2& userAllScopes, List`1& userAllRoleEntries, ReadOnlyCollection`1& userAllRoleTypes, ReadOnlyCollection`1& userAllRoleAssignments)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.LoadRoleCmdletInfo(IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, List`1 implicitRoleIds)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration..ctor(IIdentity logonIdentity, IIdentity impersonatedIdentity, ExchangeRunspaceConfigurationSettings settings, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, Boolean callerCheckedAccess)
at Microsoft.Exchange.Management.ControlPanel.RbacContext.<.ctor>b__5()
at Microsoft.Exchange.Data.Storage.LazilyInitialized`1.get_Value()
at Microsoft.Exchange.Data.Storage.LazilyInitialized`1.op_Implicit(LazilyInitialized`1 delayInitialized)
at Microsoft.Exchange.Management.ControlPanel.RbacSession..ctor(RbacContext context, SessionPerformanceCounters sessionPerfCounters, EsoSessionPerformanceCounters esoSessionPerfCounters)
at Microsoft.Exchange.Management.ControlPanel.LocalSession..ctor(RbacContext context, SessionPerformanceCounters sessionPerfCounters, EsoSessionPerformanceCounters esoSessionPerfCounters)
at Microsoft.Exchange.Management.ControlPanel.StandardSession.Factory.CreateNewSession()
at Microsoft.Exchange.Management.ControlPanel.RbacSession.Factory.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.RbacContext.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.RbacSettings.CreateSession()
at Microsoft.Exchange.Management.ControlPanel.AuthenticationSettings..ctor(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.RbacModule.application_PostAuthenticateRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
what could this be?
Thanks in advance!
Regards
Reto

More details step as suggested by UNICAN_SDEI
- Login to OWA as Administrator or any
login that has access to ECP (click Options)
- - click Options
- - Select to manage: My Organizations
- - Double click on the user has Denied Access to ECP
- - Expand Mailbox Settings
- - Role Assignment Policy should be Default Role Assignment
Policy

Similar Messages

Exchange 2010 SP2: Different problems with E_ACCESSDENIED on exchange servers

Hello All,
I'm observing a strange problem in an AD 2008 R2 / Exchange 2010 SP2 environment:
When creating a DAG and adding 1 or more servers to the DAG, the following error occurs:
Summary: 2 item(s). 0 succeeded, 2 failed.
Elapsed time: 00:00:05
<MAILBOX SERVER 1> Failed
Error:
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 1>' -Identity '<NAME DAG>'
Elapsed Time: 00:00:02
<MAILBOX SERVER 2> Failed
Error:
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 2>' -Identity '<NAME DAG>'
Elapsed Time: 00:00:02
There are no logs created on the Mailservers, so I have no more detailed information. Where to start with troubleshooting this issue?
Edit: BTW I already checked the local admin membership of the "Exchange Trusted Subsystem" domain group.
Also commands like get-owavirtualdirectory give the Access Denied error (except on the CAS servers themselves).
You know you're an engineer when you have no life and can prove it mathematically

Hi Frank,
The DAG is not yet populated. When inserting the first server(s) in the freshly created DAG, the error appeared.
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup
Name             Member Servers
Operational Servers
IICT-DAG-002     {}
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup IICT-DAG-002 -Status | fl
RunspaceId                             : cc985264-fa89-48f8-8aba-c1b0c89eb097
Name                                   : IICT-DAG-002
Servers                                : {}
WitnessServer                          : iict-srvp00-011.insourceict.local
WitnessDirectory                       : C:\IICT-DAG-002
AlternateWitnessServer                 :
AlternateWitnessDirectory              :
NetworkCompression                     : InterSubnetOnly
NetworkEncryption                      : InterSubnetOnly
DatacenterActivationMode               : Off
StoppedMailboxServers                  : {}
StartedMailboxServers                  : {}
DatabaseAvailabilityGroupIpv4Addresses : {10.100.0.54}
DatabaseAvailabilityGroupIpAddresses   : {10.100.0.54}
AllowCrossSiteRpcClientAccess          : False
OperationalServers                     :
PrimaryActiveManager                   :
ServersInMaintenance                   :
ThirdPartyReplication                  : Disabled
ReplicationPort                        : 0
NetworkNames                           : {}
WitnessShareInUse                      :
AdminDisplayName                       :
ExchangeVersion                        : 0.10 (14.0.100.0)
DistinguishedName                      : CN=IICT-DAG-002,CN=Database Availability Groups,CN=Exchange Administrative Gro
                                         up (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=InsourceICT,CN=Microsoft Exch
                                         ange,CN=Services,CN=Configuration,DC=insourceict,DC=local
Identity                               : IICT-DAG-002
Guid                                   : 71d5d869-03ac-4f8a-8de7-fc15bc6a0ae1
ObjectCategory                         : insourceict.local/Configuration/Schema/ms-Exch-MDB-Availability-Group
ObjectClass                            : {top, msExchMDBAvailabilityGroup}
WhenChanged                            : 8-6-2012 14:35:59
WhenCreated                            : 8-6-2012 13:35:21
WhenChangedUTC                         : 8-6-2012 12:35:59
WhenCreatedUTC                         : 8-6-2012 11:35:21
OrganizationId                         :
OriginatingServer                      : IICT-SRV003.insourceict.local
IsValid                                : True
You know you're an engineer when you have no life and can prove it mathematically

Exchange 2010 ECP Not Responding with IE 10

I noticed that I can no longer manage external contacts or distribution groups with IE 10 on my Windows 7 computers. The external contacts icon is doesn't respond and if I try clicking on it, IE 10 hangs and says there is a long-running script.
I've done everything I can think of with the browser. Did a full reset of IE, disabled all add-ins, disabled antivirus, rebooted.
Same problem.
I tried with Firefox and it still works fine there.
I don't have problems with other sites. I can open my mailbox throw OWA with no errors. I only have the IE crashing problem when I go to /ECP and try clicking on icons such as External Contacts.
What could be causing this issue?

Hi,
From your description, I recommend you add the ECP/OWA site to the "Compatibility Mode" and check the result.
In IIS ---> Go to ECP/OWA Virtual directory --> Under HTTP Response header --> remove X-UA-Compatible value="IE=EmulateIE7"
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Exchange 2010 SP3 RU6 - Problems with New-MailboxExportRequest

New-MailboxExportRequest seems to ignore -ExcludeFolders and -IncludeFolders and export the entire mailbox. For example:
New-MailboxExportRequest -IncludeFolder TestExport -Mailbox TestUser -FilePath \\SomeUNCPath\test.pst
will exportsthe entire contents of the mailbox. I believe this used to work before, but it is possible I have lost my mind.
The folder TestExport is on the root, as in, if you were to run Get-MailboxFolderStatistics, the FolderPath is /TestExport. I've also tried using -ExcludeFolders to exclude every other folder with no luck.
Any confirmation of an issue or help is appreciated.

Hi,
From your description, I recommend you use the following cmdlet to check the result.
New-MailboxExportRequest -IncludeFolders "#Inbox#" -Mailbox TestUser -FilePath
\\SomeUNCPath\test.pst
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

There is a problem with your mailboxes!

I keep receiving this message when I attempt to open mail:
"There is a problem with your mailboxes.
Try clicking Quit and opening mail again. If this message reappears, click Quit and Rebuild Index. The next time
you open Mail it will import your messages."
I have tried doing this and it gives me the same message each time and I can not access Mail. I am traveling and do not have any disks with me. I need to restore Mail or find away to fix the problem. I do have a Time Machine backup with me and I am not sure if I can restore the Mail application from a day before it went bad.
Thanks for any help you can give me!

You are absolutely right! I should go and buy myself a PC and then start that up when I am frustrated with Apple products :-) My point was only that Apple products seem to have taken a turn for the worse recently, but they have definitely still not sunk to the level of a common PC :-)
That said - I have another frustrating problem which you might be able to help me with? I know this is probably not the correct place to post it, but I would very much like to hear if you have a solution:
I attempted to open up my iphoto yesterday and discovered that the recent update has managed to make (almost) all of my photos disappear. I panicked for a few minutes because I have not done a backup since my Time Capsule broke down about 9 months ago, but then I found them in another user profile on my imac, so I know that the photos are still there - just not showing up when I open iphoto in my default profile. I received some sort of message along the lines of: "you cannot view photos with this version of iphoto" and then I had to "upgade" or "quit". I chose the first option and... presto!... I only had 20 photos in iphoto - instead of 8000.
Do you have any idea what I can do to bring all of my photos back? Someone suggested that I should download the 9.1 version from the Apple website, but I haven't tried that yet. Sorry for troubling you with another issue - unrelated to the originial post - but judging by my recent experience, you are the best apple-problem-solver available on the internet :-)

There is a problem with your mailboxes. Try clicking Quit-

"There is a problem with your mailboxes." "Try clicking Quit and then opening Mail again. If this message reappears, click Quit and Rebuild index. The next time you open Mail, it will import your messages."
This error has become more frequent every day as I use Mail. Luckily, I found through another thread in this Help Discussion Forum that the Avast Security App for Mac has a hard time with large mailboxes in the Mail.app:
http://discussions.apple.com/thread.jspa?messageID=9477497&#9477497
The solution appears to be as simple as un-checking "Mail Support" in the Avast "Preferences…" and the issue will be resolved.

Answered!

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Problem with your mailboxes

I keep receiving error "there is a problem with your mailboxes" and my mail keeps quitting. Any ideas?

Answered!

Problems with archive mailbox in Outlook, with exchange 2010+2013 co-existence

Hi!
We have an Exchange 2010 environment plus one Exchange 2013 MBX server meant for archive mailbox purpose. (We are going to upgrade to 2013 but with over 20.000 mailboxes it will take som time. Therefore we need to co-exist with primary mbx on 2010 and archive
mbx on 2013 for some time.)
My primary mailbox is on a 2010 MBX server, and I have today given myself an archive mbx on 2013 MBX server.
When I use OWA, both my primary mailbox and my archive shows up and everything works 100% fine!
But when I try Outlook 2010 or Outlook 2013, only my primary mailbox works. The archive mailbox shows up, but generates an error when accessing it:
"The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance"
Anyone who knows about this issue? Would we nice to know why it works in OWA but not in Outlook.
Thanks!
Trond Jenssen

Hi，
Please try to recreate a profile to access archieve mailbox.
If it doesn't make sense, also try Uncheck “Download shared folders” and check it again.
If you have any feedback on our support, please click
here
Wendy Liu
TechNet Community Support

Exchange 2010 Full Access to mailbox not working.

Hi Guys
Few changes were made to exchange so users can only have "send on behalf of" when using shared mailboxes.
for example : Sent from Bob Smith on behalf of [EmailAddress1]
need to grant full access, then use the client delegate (outlook 2010) and add them to that also.
even if you set permissions to none in Delegate the full access kicks in.
if you remove the users name from delegate (set with no permissions) full access is gone.
has anyone else come across this ?
ive been trolling the net the last 2 days and havernt found a thing . .
any help would be great.

Hi ITWizchch,
Try these methods to check what's happening and set the required access (i.e. SendOnBehalfOf without Full Access)
Check for individual user or all users having access on John's mailbox:
Get-MailboxPermission -Identity [email protected] | Format-List
Get-MailboxPermission -Identity [email protected] -User "Ayla"
Once permission is set you can use below to remove it:
Remove-MailboxPermission -Identity John -User 'Ayla' -AccessRights FullAccess -InheritanceType All
Set SendOnBehalf Permission:
Set-mailbox John -GrantSendOnBehalfto @{Add="Ayla"}
Set SendOnBehalf Permission:
Set-mailbox John -GrantSendOnBehalfto @{Remove="Ayla"}
NOTE:- When you modify a multivalued property, you must ensure that you append / remove the values accordingly , without Overwriting the existing list.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

No new mail notification in Outlook - CAS Exchange RPC Client Access problem

Hi, we're facing this problem:
Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013) anymore
Inbox does not show the new mail either
When the user changes folders in outlook, the new mail does show in the Inbox folder
Restarting Outlook shows the new mail as well.
The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
No entries in the event logs that seems to be related
As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD while the issue occurs. We
can only kill the process and restart the service, solving the issue instantly.
What we’ve tried until now:
Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
Updated all Exchange servers to latest critical Windows updates
Recalculated requirements using MS Sizing tool. Upgraded EXCH1-RTD VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
and 4vCPU (1 core/cpu)
Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
Any ideas would be greatly appreciated!
Ron

Hi Ron,
From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 OWA access on internal LAN login form not working as expected

hi
We have exchange 2010 sp3 installed and working. we have two sites
Site a
1 x CAS
2 X MBX
Site b
1 x cas
2x mbx
site A is the primary site we currently publish owa our through our TMG server located in the DMZ this is working as expected and carries out the forms authentication. our internal domain is company.local but our external domain is company.com
we have created split DNS so that we could use a wildcard cert and to deal with CA new rules. All URL's in Exchange are configured to use the external reference of company.com/
on the IIS server we have a redirection on the root of the site to redirect the requests through to OWA folder and we have basic Authentication enabled. on the OWA folder we have basic and windows authentication.
The problem we have is that when users try to access OWA internally we get username and password box appears once you login with this it then takes you through to the the normal login screen and you have tyo login again I'm thinking that this is the windows
authentication that is causing this but not sure?
also would be good to get an understanding as to what the Authentication, SSL and redirection setting should be set to on your CAS servers as looking at the ECP and autodiscover folder within IIS this currently has a redirect set to go to OWA surely that
cannot be right,
thanks
J

Hi
you are correct, the immediate concern is the double login to owa i do however want to also know what the settings/configuration for Authentication redirection and SSL should be set to on all virtual directories.
we do not have any additional OWA virtual directories just the default
These are the current live servers
Identity                      : ACAS01\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://email.Company.com.com/owa
ExternalUrl                   : https://email.Company.com/owa
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : BCAS01\owa (Default Web Site)
Url                           : {}
Exchange2003Url               : https://www.Companyt.co.uk/
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
These are the new servers which i have just installed
Identity                     : CAS05\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : CAS06\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : CAS04\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
I have noticed that FBA is set on the new servers does this need turning off and if so is this on IIS or in Exchange?
the link that you have provided talks about creating new Vdir for TMG we are looking at removing TMG and replacing it with KEMP load balancers would we still need to have two Vdir to make FBA work internally and externally
to make a new vdir do you need a new IP address? and what are the steps required in Exchange and IIS to get this working.
thanks
Jason

Disable SafeHTML in OWA on Exchange 2010? XML attachment with non-XML extension content gets stripped

Is it possible to disable SafeHTML in Outlook Web App on Exchange 2010?
We have users that receive messages with attachments that are generated by a 3rd party.
They are XML files saved with a XLS extension.
When opening via Outlook, Excel prompts that the content does not match the content type and asks the user if they want to open the file anyway, when opened the file does contain the data.
When opening the file via OWA, the contents are stripped out and replaced with the text: This attachment was removed because it contains data that could pose a security risk.
The problem is that some users exclusively use OWA and they need to be able to open these attachments.
Thank You.

Hi,
You can disable the OWA SafeHTML filtering by changing changing the
BypassOwaHTMLAttachmentFiltering option to true, for more details, please refer to the following article.
All HTML content in attachment files of messages is run through an HTML filter when you open or save the attachment by using Outlook Web Access (OWA)
http://support.microsoft.com/kb/958881
Best regards,
Belinda Ma
TechNet Community Support

Outlook/exchange 2010 "cannot expand folder" on shared mailbox

exchange 2010. outlook 2010 (and outlook 2013).
change user mailbox 'mailbox1' to a shared mailbox with powershell:
set-mailbox mailbox1 -type shared
verify the mailbox appears as shared in exchange console.
grant Full Access Permission to mailbox1 to Group1 AD group.
member of Group1 adds mailbox1 as an additional mailbox to his outlook exchange account.
when he clicks on mailbox1, outlook says "cannot expand folder. (was this information helpful?)"
member of ad group logs out of windows and logs back in repeatedly.
but when he clicks on mailbox1, outlook says "cannot expand folder. (was this information helpful?)"
edit: if I specifically grant full access permission to the user, he can open the mailbox in outlook. I want to grant the permission to a group, not to individual users.

Hi,
I can give a security group full access permission to a shared mailbox in my Exchange 2010 environment. And all group members can add the shared mailbox as an additional mailbox in Outlook.
Please make sure the full access permission has been assigned to Group1 and the problematic user is a member of this group. Then remove the additional mailbox and restart Outlook, re-add the shared mailbox as an additional mailbox to have a try. If the issue
persists in Outlook, please try to open the shared mailbox in OWA to check whether the user can access it.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 SP1 - Export to PST, Remove Mailbox

I'm looking for a PowerShell script that will allow me to use Exchange 2010 SP1 to export a mailbox to PST and then when finished, delete the user and mailbox. I typically do this process manually about 6 months after an employee leaves the company (allowing
for live access to the mailbox and message forwarding to their supervisor).
Ideally, the script would take input for a mailbox ID, and then export the file to a file of the mailbox name (Prompt: jdoe -> New-MailboxExportRequest -Mailbox jdoe -FilePath \\server\path\jdoe.pst). After the export is complete, it would schedule the
mailbox for complete removal and remove the completed mailbox export request. The prompt and export process should be simple enough, but I suspect the difficulty will come with monitoring for the completed request before acting on the removal.
Thanks for any help provided! :)

Thanks for the guidance!
I think I was able to come up with something that will do the trick nicely:
$Name = Read-Host "Please enter a mailbox to archive"
New-MailboxExportRequest -Mailbox $Name -FilePath \\Exchange\C$\ExchangeExports\$Name.pst
while ((Get-MailboxExportRequest -Mailbox $Name | Where {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"}))
sleep 60
Get-MailboxExportRequest -Mailbox $Name | Remove-MailboxExportRequest -Confirm:$false
Remove-Mailbox -Identity $Name -Confirm:$false
Hopefully it may help others.

Exchange 2010 ECP Access Problem with reconnected Mailbox (RBAC)

Similar Messages

Maybe you are looking for