Exchange 2010 Edge server shows previous version
I have an Exchange 2010 environment with the Edge role installed on TMG and its working fine. All servers have had SP3 installed and rebooted.
I am trying to introduce my first Exchange 2013 server into the environment but the readiness check tells me not all the servers have SP3. On the Edge server it shows SP3 is installed but from all other Exchange servers it shows SP2.
Any ideas?
Thanks
For anyone else wondering. I've done this in my lab, and I didn't have to remove the old subscription, just export the file from your edge server, copy it to any server running emc internally and import it, then force a sync and the version should
update.
On edge server open exchange
powershell and run New-EdgeSubscription -FileName
"C:\EdgeSubscriptionInfo.xml"
Import edge file
into new server
You
need to be assigned permissions before you can perform this procedure. To see
what permissions you need, see the "EdgeSync" entry in the
Transport
Permissions topic.
In the console tree, navigate
to Organization Configuration >
Hub Transport.
In the result pane, click the
Edge
Subscriptions
tab.
In the action pane, click
New Edge
Subscription. On
the New Edge Subscription page, complete the following fields:
Active
Directory site Click
Browse, and then select an Active
Directory site in the drop-down list. This field identifies the Active
Directory site where the Hub Transport server is connecting to the Edge
Transport server for which the Edge Subscription exists.
Subscription
file Click
Browse, and then select an Edge
Subscription file.
Automatically
create a Send connector for this Edge Subscription Select
this check box to automatically create a Send connector that routes
messages from the Exchange organization to the Internet. The Edge
Subscription is configured as the source server for the Send connector.
The Send connector is configured to route messages to all domains by
using Domain Name System (DNS) MX resource records.
Click
New to create the new Edge
Subscription.
On the
Completion page, review the following,
and then click Finish to close the wizard:
A status of
Completed indicates that the wizard
completed the task successfully.
A status of
Failed indicates that the task
wasn't completed. If the task fails, review the summary for an
explanation, and then click Back to make any configuration changes.
Start-EdgeSynchronization
-Server Hub01 -TargetServer Edge03 -ForceFullSync
Similar Messages
-
EXCHANGE 2010 - Edge server with forefront FULL OF SPAM
Hi there.
We have recieved on Exchange 2010 EDGE server a lot of spam 200k messages in queue.
We have stoped inboud SMTP traffic on firewall to stop the attack.
Any suggestion how to empty the queue? I've heard there is a way to rename the "Exchange queue folder" but forget the procedure.
How to stop the attacker?
bostjancHi There,
Use the KB below to find the Queue DB, then stop the service listed In the KB, rename the old DB and create a new one with the same name, than start the Service.
http://www.ntweekly.com/?p=653
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization -
Using Exchange 2010 Edge server as an SMTP gateway without other roles
I am looking to implement a simple SMTP gateway solution for a few applications to relay emails and hence am not looking at a full fledged Exchange deployment. As SMTP component is no longer available in Windows Server 2012, I would like to know if the Exchange
2010 Edge role can function as a simple SMTP gateway solution without having the other roles of Exchange 2010 deployed like the CAS, Hub and Mailbox ?
My requirements from this SMTP gateway solution would be the ability to append disclaimers, relay restrictions based on IP addresses and sender email addresses, and provide both authenticated and unauthenticated relay access.
Any inputs would be highly appreciated. Thanks in advance.Hi again
I decided to test the scenario - just for fun, and it seems to work. A strange setup :-)
So you will have to prepare your schema and AD - and create an Exchange organisation.
Then you will have to assign the receive connector(s) AD permission to relay outside the organisation - by default it can only relay internal, but since your mailsystem is "outside" seen from Exchange - you'll need to do that.
Is your AD domain the same as your SMTP namespace? Because then you have to make it external relay after you have removed it from the e-mail address policy :-)
BR
Steen -
How to close OPEN RELAY on Exchange 2010 EDGE server
How to close open relay on it?
Server passed OPEN relay test and we would like to avoid spammers attackin us.with best regards
bostjancGet-ReceiveConnector | Get-ADPermission | where {($_.ExtendedRights -like "*SMTP-Accept-Any-Recipient*")} | where {$_.User -like '*anonymous*'} | ft identity,user,extendedrights
Identity User
ExtendedRights
EXCHANGE-EDGE\Default internal receive co... NT AUTHORITY\ANONYMOUS LOGON {ms-Exch-SMTP-Accept-Any-Recipient}
Recreated RECIEVE CONNECTOR on EDGE solved it.
bostjanc -
How do I know which update rollup is installed on my exchange 2010 sp3 server ?
how do I know which update rollup version is installed on my exchange 2010 sp3 server ?
Anand_NAnd take a peek here:
http://blogs.technet.com/b/rmilne/archive/2013/10/29/how-to-check-exchange-2010-ru-version.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
In ios7 how do you limit the number of emails downloaded from the ISP server? Previous version allowed you limit the download to the last 50, 100, etc.
Hi,
Unfortunately, this is a feature that Apple have taken away.
The best way to let them know you want it back is via http://www.apple.com/feedback/
Regards -
My macbook air cannot sync with my office microsoft exchange 2010 mail server
My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see. -
Exchange 2013 CAS server connection to Exchange 2010 Mailbox server
Hi Guys,
I have a quick question i am planning to upgrade my infra from Exchange 2010 to Exchange 2013 and i have come across a small question, my infra looks likes below
3 Exchange server (CAS+ HT + MBX roles) Exchange 2010
1 Exchange server MBX role For journlaing Exchange 2010
1 CAS for internet owa access Exchange 2010
Now i will be installing exchange 2013 CAS on 2 box and MBX on 3 box
will decomm the 3 exchange box which has (CAS+ HT + MBX roles) and 1 CAS which we use for owa access.
will keep the Journaling server as it is will not be decomming it as of now.
My question is is will i be able to connect to the journaling mailbox's which are hosted on exchange 2010 journaling server without actually having any 2010 cas server, will exchange 2013 cas directly help me to connect to the journal mailbox or would i need
to add CAS role on Exchange 2010 journaling server and enable outlook anywhere configure the directories with the url's to make it working.
Please suggest on the same.
BR/DeepakHi TheLearner,
Thank you for your question.
Exchange 2013 didn’t connect to the journal mailbox directly when we access it by outlook/OWA. The journal mailbox will connect the former Exchange 2010 CAS. Or we could migrate Journaling mailbox to Exchange 2013. Because Exchange 2010 could communicate
with Exchange 2010 by RPC, but Exchange 2013 could communicate with Exchange 2013 by HTTPS.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Exchange 2007 edge server with ironport
I currently have a frontend exch 2003 and backend exch 2003 server with ironport. my mx record is the ironport which then forwards into the backend server. The frontend server was only used for owa and using outlook with https connection to exchange.
With 2007 it has more functionality and the front end server is now called an edge server. Should I have mx go there then to ironport or vice versa? I'm thinking ironport to edge server to hub transport server. Is that correct? will it work?
anyone have exchange 2007 edge server with ironport? what are you doing?well that wouldve been nice to know a little earlier. anyway I have ironport successfully sending mail to the edge server who sends it on to the hub transport server. right now the client access server is on the same as the hub but can be easily moved later. this is for very few people so its not like I need to off load anything as its a powerful dual core server. anyway now with the edge server I can test how effective it is versus the ironport. I'll let everyone know when you can ditch the ironport for msft's edge server. (Don't hold your breath).
-
Exchange 2010 calendar not showing on outlook 11 Mac
Exchange 2010 calendar not showing on Outlook 11 Mac on my iMac. It shows fine on iPhone and OWA.
Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Regards. -
Exchange 2010 edge transport server, degraded desktop / remote desktop
I have a 2010 edge transport server loaded on windows server 2008 R2 that after about 3 days will no longer allow RDP connections or desktop logons due to a serious performance lag / time out. A reboot clears the performance issue for about another 3 days.
I allowed an RDP connection to stay open for the 3 days and it continues to work however actions like trying to load the task manager, start button, computer or any windows not currently open takes an extremely long time. Task manager and perf mon show very
little processor and memory usage.
Tried the following to resolve:
Replaced hard drives (raid 1)
Replaced server (moved drives from one server to another chassis)
Monitoring iops, memory usage and proc transactions. Nothing shows any unusually high usage.
I tried disabled AV services, log monitoring and backup services both while the issue was happening and as preventative measure before the issue arose.hi cna you check if by any chance you have bandwidth limitations configured. either on router or on tour switch. i had this kind of issue and it ended with bandwidth issue which was configured wrongly. you said this is happening with RDP. hows the performance
when accesing locally
did you check performance counters and event viewer.. anything there
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected] -
Exchange 2010: ActiveSync Report shows large amount of hits. So what should I do?
Hello,
We currently use the ActiveSync Report to run a daily report of Hits on the Exchange 2010 SP3 RU5 CAS servers (http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx)
The script will report a large number of hits for several users, for different reasons. The question I have is what do we do about it? It's great to know we have a large number of hits, but I'm not sure why and what to do about it.
Examples:
1) No User, DeviceID, DeviceType (the columns are blank) and it shows 19,000 hits. Almost all are from IIS_4xx (what does that mean?)
2) A user with 16,200 hits and it looks like 15,661 were from PING
3) A user with 3,493 hits and it looks like 3224 were from SYNC
Any advice on how to investigate and resolve the data that the daily script for ActiveSync hits reports?
Thanks!WHY are there so many PINGS for some device, and so many SYNC for others. And why is one deviceID/UserID blank?
because it is how the ActiveSync Client is setup. You will need to have the users to upgrade their client. for e.g. iOS verion (dont remember the version number) has some severe issue back in the past and brought down the CAS server due to so much log generation.
If your user still have the old OS/iOS on their device then you have to have them upgrade.
Why the userid or device id is blank -- I have no idea but I can't of there may be some Android devices.
Where Technology Meets Talent -
Hi,
We have an Exchange server 2007 and an Edge server 2007 is configured in the perimeter network. Most of our clients use Public email domains such as Yahoo and Gmail. Last few weeks it has been a major issue for us that most of the emails from Yahoo/Gmail
get blocked by our Edge server calming the sender IP address is in Block Lists.
As a solution I've added yahoo.com/gmail.com/aol.com/hotmail.com to "BypassedSenderDomains" hoping if emails receive from one of these domains it will bypass the connection filtering. But still some of our customers complain that their emails are
still not passing to us and blocked by our edge server. They have provided me the error message they receive.
Our clients get following error message
edgexch gave this error: Recipient not authorized, your IP has been found on a block list
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction
may be preventing delivery.
550 5.7.1 Recipient not authorized, your IP has been found on a block list
When I check the Agent logs in Edge server I found specific email had been blocked. Please check one of the log entry.
Timestamp : 1/30/2014 1:45:15 PM
SessionId : 08D0E865200E7CBF
IPAddress : 98.139.213.140
MessageId :
P1FromAddress : Sender Email Address (@yahoo.com)
P2FromAddresses : {}
Recipients : {Recipient Email address}
Agent : Connection Filtering Agent
Event : OnRcptCommand
Action : RejectCommand
SmtpResponse : 550 5.7.1 Recipient not authorized, your IP has been found on a block list
Reason : BlockListProvider
ReasonData : bl.spamcop.net
This troubles me because I've added Yahoo.com to "BypassedSenderDomains" on 1/28/2014 and this email was blocked on 1/30/2014. I've checked whole Agent logs from 28th to-date and found most of the messages from white-listed domains bypassed
the content filtering but some were still getting blocked. Most of the messages from white-listed domains were blocked from "bl.spamcop.net " IP block list provider.
As a solution for the current situation I've disabled "bl.spamcop.net" from the "IP block List Providers". But the issue is, why the mails are getting blocked even the domains were white-listed. I though after white-listing emails domains,
messages will bypass the content filters if the email generates from one of the white-listed email domain.
I've also added the "Content Filter Config" for your reference.
[PS] C:\Windows\system32>Get-ContentFilterConfig
Name
: ContentFilterConfig
RejectionResponse
: Message rejected as spam by Content Filtering.
OutlookEmailPostmarkValidationEnabled
: True
BypassedRecipients
QuarantineMailbox
: [email protected]
SCLRejectThreshold
: 7
SCLRejectEnabled
: False
SCLDeleteThreshold
: 9
SCLDeleteEnabled
: False
SCLQuarantineThreshold
: 5
SCLQuarantineEnabled
: True
BypassedSenders
BypassedSenderDomains
: {yahoo.com, gmail.com, hotmail.com, aol.com}
Enabled
: True
ExternalMailEnabled
: True
InternalMailEnabled
: False
AdminDisplayName
ExchangeVersion
: 0.1 (8.0.535.0)
DistinguishedName
: CN=ContentFilterConfig,CN=Message Hygiene,CN=Transport Settings,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,CN={4546F49-6BC5-4F7A-848F-03E4652528A6}
Identity
: ContentFilterConfig
Guid
: c501959c-b062-4f59-8f0c-404c53f54a34
ObjectCategory
: CN=ms-Exch-Message-Hygiene-Content-Filter-Config,CN=Schema,CN=Configuration,CN={4546F4196BC5-4F7A-848F-03E4652528A6}
ObjectClass
: {top, msExchAgent, msExchMessageHygieneContentFilterConfig}
WhenChanged
: 1/28/2014 8:48:49 PM
WhenCreated
: 1/8/2012 8:42:18 PM
OriginatingServer
: localhost
IsValid
: True
It would be great if someone could help me to resolve this issue because this is a major problem since we lost mails from our valuable customers.
Thanks in advance.
TharakaHere is a similar issue someone with Exchange 2010 -
http://social.technet.microsoft.com/Forums/exchange/en-US/36aec4f6-6d73-4d71-ab64-e7f3d817b39b/exchange-2010-still-blocks-mail-from-domain-on-dnsbl-even-though-its-on-bypassedsenderdomain?forum=exchange2010. So in essence, use the exceptions tab for
the IP Block List Providers. See if that will work as a solution for you.
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution. -
Error installing Exchange 2010 on Server 2012 R2
I have the immense displeasure of trying to install Exchange 2010 (migrating from 2003) onto our new Server 2012 R2 server. I get to the install screen when I get this error immediately upon pressing the "Install" button:
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema0.ldf")
" was run: "The system cannot find the file specified".
The system cannot find the file specified
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Unfortunately there is NO help on the Microsoft site about this error so I have NO clue how to fix this or what file is missing. What do I do next? I'd like to get this installed and running over this weekend. Can anyone shed light on this problem? It's
2012 R2, just patched the 15 updates that it found BEFORE installing (or attempting I should say) Exchange 2010.Hi,
The support version of Operating system for Exchange 2010 is as follows
64-bit edition of Windows Server 2008 Standard with Service Pack 2 (SP2)
64-bit edition of Windows Server 2008 Enterprise with SP2
64-bit edition of Windows Server 2008 R2 Standard with SP1
64-bit edition of Windows Server 2008 R2 Enterprise with SP1
Windows Server 2008 Datacenter RTM or later
Windows Server 2008 R2 Datacenter RTM or later
Windows Server 2012 (Requires Exchange 2010 SP3 or later)
Officially Ms not announced to have Exchange 2010 in Windows Server 2012 R2. Check it out the service pack you are using in Exchange server 2010.
Try to download new iso image from the Microsoft Volume licensing page or from download site..may the image can be corrupted.
Ref: http://technet.microsoft.com/en-us/library/aa996719(EXCHG.141).aspx
Exchange Queries -
Exchange 2010 edge antispam gone crazy
Hello,
So we have an exchange 2010 infrastructure, with 2 edge servers laying in the DMZ with edgesync configured.
Now we also had that option to "block messages sent to recipients that do no exist in directory" enabled, all was good until a few days ago, when it went berserk and started blocking everyone, with an NDR "550 5.1.1 user unknown". so
now it's disabled.
Few changes that might have caused this, is that we added a new tree domain under the same forest, it's been prepared so exchange can see it. not sure if that could have caused this?
Any ideas?Hi Abdallah,
According to the description, I notice that all users on our Exchange server can’t receive messages, and senders get NDR “550 5.5.1 User unknown”.
Following article relates to Anti-Spam mail flow, for your reference:
http://technet.microsoft.com/en-us/library/aa997242.aspx
How is the impact, all senders are blocked by the Edge server or some specific senders?
Based on the link above, I suggest double check the configuration on both “Connection Filtering” and “Sender Filtering”.
More details to check:
1. Whether the Sender IP in the IP Block List.
2. Whether the Sender IP in the IP Block Provider’s RBL.
3. Whether the Sender address from Blocked domain.
4. Whether the Message from Blocked sender.
5. Whether the Recipient from Block List.
Pleas also try to re-start Active Directory Lightweight Directory Services for testing.
Please double check the Receive Connector configuration.
If there is any related Error message in App Log, please paste it in details without sensitive information for the further troubleshooting.
Best Regards,
Allen Wang
Maybe you are looking for
-
Is It My Macbook Pro or Leopard?
I have a Macbook Pro Core 2 Duo (November 2006) that was purring like a kitten when I bought (running on Tiger). Ever since upgrading to Leopard I've had nothing but problems, but some of them have been so disconcerting I'm not sure if the issue is s
-
Date Format Picture ends before converting entire input string..
Hi all i am creating a report in 10g.. in which i want to convert Emp_lump_sum (number) to character .I have created a formula column in which i have written a function in the formula column and assign that formula column to the text field in which
-
I'm working in a test environment to configure Solaris 10 hosts to authenticate against an Active Directory environment using LDAP and Kerberos. I have all of the hard parts done - I can login locally, ssh, telnet, ftp, etc to the Solaris 10 device u
-
JSP code: <%@ page import="javax.xml.transform.*,javax.xml.transform.stream.*,java.io.*" %> <%TransformerFactory tFactory = TransformerFactory.newInstance(); Transformer transformer = tFactory.newTransformer( new StreamSource("book.xsl")); transforme
-
I have got to stage below - i have 20 distribution codes imported but it wont let me tick the box for my VPP apps, only the free ones? Any suggestions please