Exchange 2010 Edge Transport - Not being detected by SCOM agent?

All,
I recently installed the SCOM 2007 R2 agent onto our Edge Transport server for Exchange 2010. Our architecture is pretty simple. We have a DMZ network where I have a SCOM 2007 R2 Gateway server and our Edge Transport server.
Essentially it goes like this:
Edge Transport Server Agent <-> Gateway Server <-> SCOM RMS server
I have the Exchange 2010 and the FOPE for Exchange 2010 MP's loaded on our RMS server. When I loaded the SCOM 2007 R2 agent onto our Edge server, the agent discovered it had FOPE and does reflect as such on the RMS server, but it did not seem to pick
up that it was also the Exchange Edge Transport role.
I looked on the RMS server in the Authoring -> Object Discoveries and the Edge transport is set to discover, so I am a little stumped as to why the agent didn't discover the role.
Any suggestions where to look next?

Just a little more detail on this. I've been working on this exact issue for probably 3 weeks with an engineer.
This issue is actually a bug in the Exchange 2010 MP.
How is it a bug exactly? Well, the MP is looking for the Active Directory site that the Edge Server is a member of... let's think about this, the Edge server is NOT domain joined, and as such, shouldn't have an active directory site.
Additionally, the regkey path referenced above is incorrect, though it seems that numerous others have figured that out on their own as well. The correct regkey path should be:
hklm>system>currentcontrolset >services>netlogon>parameters
So sure, this "fixes" the issue - but the real issue is that the MP is looking for an Active Directory site, on servers that aren't a member of an active directory site. Kind of a BIG oversight by the MP authors in my opinion.
I'm sure there are plenty of orgs relying on SCOM to monitor their Exchange 2010 implementations that don't even realize that their Edge servers aren't being monitored for the Exchange roles.

Similar Messages

Exchange 2010 edge transport server, degraded desktop / remote desktop

I have a 2010 edge transport server loaded on windows server 2008 R2 that after about 3 days will no longer allow RDP connections or desktop logons due to a serious performance lag / time out. A reboot clears the performance issue for about another 3 days.
I allowed an RDP connection to stay open for the 3 days and it continues to work however actions like trying to load the task manager, start button, computer or any windows not currently open takes an extremely long time. Task manager and perf mon show very
little processor and memory usage.
Tried the following to resolve:
Replaced hard drives (raid 1)
Replaced server (moved drives from one server to another chassis)
Monitoring iops, memory usage and proc transactions. Nothing shows any unusually high usage.
I tried disabled AV services, log monitoring and backup services both while the issue was happening and as preventative measure before the issue arose.

hi cna you check if by any chance you have bandwidth limitations configured. either on router or on tour switch. i had this kind of issue and it ended with bandwidth issue which was configured wrongly. you said this is happening with RDP. hows the performance
when accesing locally
did you check performance counters and event viewer.. anything there
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

"Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers "Report show no result

hello,
i have an issue in my SCOM 2012 report.when i go to
Reporting --> Exchange Server 2010 Report Library-->and open the report Microsoft.Exchange.2010.Reports.Transport.Platform.Top users.
in my scom 2012 console and execute the report for top users on the basis of Messages Send or Messages Received ,it return zero result.
thank you

Hi,
Blank reports can be a common issue with System Center Operations Manager. These are caused by many different reasons, and for the focus of this article we will discuss the following:
1. The wrong type of entity was selected as the report target.
2. The corresponding performance collection rule or the script that generates the performance data is not enabled for the report target.
3. There is a functional problem with the Health Service on the agent.
4. Management servers are unable to insert data into the OperationsManagerDW database.
5. Data is stuck in the staging tables in the OperationsManagerDW database.
More details:
https://support2.microsoft.com/kb/2573329?wa=wsignin1.0
In addition, it is suggested to configure the Exchange management pack according to the mangement pack guide.
And here are two links that should be helpful for you regarding to this issue, please refer to them:
http://zoomindia111.wordpress.com/configure-exchange-2010-sp1-management-pack-in-scom-2007-r2/
http://blogs.technet.com/b/emreguclu/archive/2011/09/26/empty-exchange-2010-server-statistics-mailflow-reports-if-default-log-directory-has-changed.aspx
Regards,
Yan Li
Regards, Yan Li

Using Exchange 2010 Edge server as an SMTP gateway without other roles

I am looking to implement a simple SMTP gateway solution for a few applications to relay emails and hence am not looking at a full fledged Exchange deployment. As SMTP component is no longer available in Windows Server 2012, I would like to know if the Exchange
2010 Edge role can function as a simple SMTP gateway solution without having the other roles of Exchange 2010 deployed like the CAS, Hub and Mailbox ?
My requirements from this SMTP gateway solution would be the ability to append disclaimers, relay restrictions based on IP addresses and sender email addresses, and provide both authenticated and unauthenticated relay access.
Any inputs would be highly appreciated. Thanks in advance.

Hi again
I decided to test the scenario - just for fun, and it seems to work. A strange setup :-)
So you will have to prepare your schema and AD - and create an Exchange organisation.
Then you will have to assign the receive connector(s) AD permission to relay outside the organisation - by default it can only relay internal, but since your mailsystem is "outside" seen from Exchange - you'll need to do that.
Is your AD domain the same as your SMTP namespace? Because then you have to make it external relay after you have removed it from the e-mail address policy :-)
BR
Steen

Exchange SP1 Edge Transport Install Error

Hi everyone,
I've successfully installed multiple Mailbox and CAS 2013 SP1 servers into an existing Exchange 2010 environment.
However, when I get to the Edge Transport role on a separate server, at step 7 of 9, it throws the following error:
Error:
The following error was generated when "$error.Clear();
new-ExchangeServer
" was run: "Value cannot be null.
Parameter name: Cannot get child of ADObjectId: this is a GUID based ADObjectId.".
Any ideas what could be causing this? I haven't been able to find anything of significance while searching around...
Thanks!

Hi,
Make sure prerequisites for Exchange 2013 Edge Transport server role are met. For more details about this, you can refer to the following article.
Exchange 2013 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx#WS2012Edge
If you have checked above, and this issue persists, please check the set up log to see if there is related error message to narrow down the issue.
Besides, here is an article about Edge Server installation for your reference.
Install the Exchange 2013 Edge Transport role using the Setup Wizard
http://technet.microsoft.com/en-gb/library/dn635117(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Hp v235r flash drive not being detected on my computer

Hi,
I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

Hello budda48,
Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
Open Computer Management by right clicking on Computer and clicking Manage.
Click on Disk Management. Give it a moment to open the view of the drives installed.
Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
Right-click the unlabeled drive and click Change drive letter and paths…
Click Add and then click OK to select the first available drive letter.
If the Change drive letter and paths… option is not available, make sure that the drive is Online.
If the drive is Offline, right-click the disk number and click Online.
Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
Remove the pen drive from the computer if it’s attached.
Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
Choose the Advanced tab and click on Environment Variables… button at the bottom.
Under System Variables, click on the New… button
Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
Click OK on all the open windows to close them out.
Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

iPhone, iPad, or iPod touch not appearing in iTunes

HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes. What should I do?

After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync. Any solutions?

A few things to try. Any one or a combo mayhelp
Reset your iPad.
Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
Try a different USB port
Reboot your computer
If you have a PC:
If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
Then redownload and reinstall iTunes. then try again.

My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
Regards.

My iphone is not being detected by the itunes on my laptop with windows 8

the iphone is not being detected by the itunes on my laptop with windows 8
someone please help

iPhone, iPad, or iPod touch not appearing in iTunes

IPhone 6 and iPod Touch 5 not being detected by iTunes 12

iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
Tried changing the lightning conductor, that didn't help either.
Re-installed iTunes but it was of no use. :/

See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Iphone 4s not being detected by windows 8 laptop and itunes

Hey all,
My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
Is there anything i can do?
thanks all....

Hello Bethany2
Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Exchange 2010 Edge Transport - Not being detected by SCOM agent?

Similar Messages

Maybe you are looking for