Exchange 2010 - Email signature setup with Transport Rule - Want to disable the rule for iOS devices

So we decided to have a company wide email signature which pulls user info from AD to fill in the HTML template. What I have found out is that iOS devices send email as plain text which displays the HTML content with strings of text in emails send from
those devices. The only way I have found to make this work is have the user keep the default "Send from my iPhone" signature and exclude the rule based on that text in the body. Is there a cleaner option in case our users decide to change their default
signature on their iOS devices?

I can't find a clean answer for you.
You might use the Set-TransportRule cmdlet and one of the exception clauses to look for something in the header.  I looked at an ActiveSync-generated header from my Droid (I don't have an iPhone to try this out on) and I see this:
Message-ID: [email protected]
The clause:
-ExceptIfHeaderMatchesPatterns "Message-ID:\s(\S|\s)*email.android.com"
should exclude messages sent from Droids.  Of course, I can't say that it'll exclude all of them so you'll have to experiment and use trial and error.
http://technet.microsoft.com/en-us/library/bb123534(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/aa997187(v=exchg.141).aspx
You may need to experiment with the rule because I haven't tested it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

  • Exchange 2010 - Error setting a new transport rule for email disclaimer

    Hi
    Trying to setup some additional email disclaimer rules on Hub transport under Org Config on exchange 2010. We allready have a few and they work ok, however we are trying to replace this woth some alternate ones and are getting the error
    The length of the property is too long. the maximum length is 8192 and the length of the value provided is 8522.
    Most of this length comes from the html code we are inserting into the disclaimer. I've reduced it by about as much as i can but it's still too large. Does anybody have any suggestions or know if it;s possible to increase the 8192 sixze limit ?
    Regards
    Roger

    Hi Roger,
    For AD replication packet the ideal size is 8K. Or the above error may occur due to build/design issues.
    You can eliminate this size related issue by splitting the large rule into multiple rules. This size limit is Per Rule and does not add up for all rules. 

  • I have an email that was shut off and I cant remove the account for my devices

    My ******** account was turned off by my provider. Now I can not access the iCloud account associated with this email. I want to remove this account from all my devices but dont have the password. I have attempted to reset the password, but it sends the info to the ******** which I can not access.
    Please help
    <Edited by Host>

    Contact the Apple account security team to verify your identity and request assistance resetting the password: Apple ID: Contacting Apple for help with Apple ID account security - Apple Support.  If your country isn't listed, contact iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

  • Exchange 2010 failing during setup - Managment Tools

    Hello,
    I am hoping that someone can assist me with this error I am getting while trying to install Exchange 2010 on server 2008 R2. It seems that towards of the installation of the Management Tools it fails. Please see my screenshot. Any assistance would be appreciated.
    Here are the steps that I have taken to troubleshoot:
    Uninstalled exchange failed install
    attempted to reinstall - fail
    The firewall was turned off so I turned it back on because I read that someone else had the same issue and it worked for them.
    So far nothing is working for me. I installed Exchange once before as a VM and didn't have any issues at all.
    Phil Balderos

    Hi
    Did you set the service to automatic and start it? Did you reboot the server after that and then run the setup again?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Thanks Ed,
    When I first built the VM I stopped the firewall server then disabled it. So when I had to start troubleshooting this issue I started the fire wall and then and set the startup type to manual. I did reboot the server several times when I had to
    uninstall the failed installation.
    Phil Balderos

  • Exchange 2010 move request failed with MapiExceptionCallFailed

    hi
    Attempting a local move request of Mailbox but it fails.
    plz help
    Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
    MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropFXDstCopyConfig [83]
        Lid: 27962   ROP: ropTellVersion [134]
        Lid: 27962   ROP: ropFXDstPutBufferEx [157]
        Lid: 17082   ROP Error: 0x48A    
        Lid: 31329 
        Lid: 21921   StoreEc: 0x48A    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 1238    Remote Context Overflow
        Lid: 1947    StoreEc: 0x48A    
        Lid: 1435    StoreEc: 0x48A    
        Lid: 1947    StoreEc: 0x48A    
        Lid: 1435    StoreEc: 0x48A    
        Lid: 1947    StoreEc: 0x48A    
        Lid: 4559    StoreEc: 0x48A    
        Lid: 21802 
        Lid: 19994   StoreEc: 0x48A    
        Lid: 20202 
        Lid: 3305    StoreEc: 0x48A    
        Lid: 32762   dwParam: 0x3FE70003
        Lid: 32762   dwParam: 0x361384B0
        Lid: 32762   dwParam: 0x36170003
        Lid: 32762   dwParam: 0x36DA0102
        Lid: 32762   dwParam: 0x36E00102
        Lid: 32762   dwParam: 0x3FD60040
        Lid: 32762   dwParam: 0x3FE4000B
        Lid: 32762   dwParam: 0x67590102
        Lid: 32762   dwParam: 0x675A0102
        Lid: 32762   dwParam: 0x30080040
        Lid: 32762   dwParam: 0x675C0102
        Lid: 32762   dwParam: 0x65E30102
        Lid: 32762   dwParam: 0x67510003
        Lid: 32762   dwParam: 0x672D0003
        Lid: 32762   dwParam: 0x673384B0
        Lid: 32762   dwParam: 0x673284B0
        Lid: 26346 
        Lid: 4073    StoreEc: 0x48A    
        Lid: 28570   StoreEc: 0x48A    
        Lid: 29738 
        Lid: 3401    StoreEc: 0x48A    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x48A    
        Lid: 22630 
    Context:
    Operation: IMapiFxProxy.ProcessRequest
    OpCode: TransferBuffer
    DataLength: 2362
    Operation: IMapiFxProxy.ProcessRequest
    OperationSide: Target
    Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
    OpCode: TransferBuffer
    DataLength: 2362
     Any ideas?  any help much appreciated

    What version of Exchange 2010?  SP2, RU #?   I saw this support article form MS for 2003 --> 2010
    http://support.microsoft.com/kb/2579051.  Not sure if it is applicable.  It could be you need to go to RU4 for SP2 Exchange 2010.  Do not install RU5 as there were issues.
    I've also run into several support articles about ACLs on the mailbox or fiolders:
    http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
    http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
    Let me know if I can provide any additional help.
    JAUCG

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Create Transport rule for restrict message size and send a rejected message CC: to Administrator

    I want to create a Exchange Transport rule for message size restriction (10 MB) when message size is exceed to 10 MB it rejected by the Exchange server and
    also rejected message CC: to Administrator. I also create it but unable to configure rejected message CC: to Administrator. Thanks.
    Babu

    Hi Babu,
    I have some tests in my environment using Exchange 2013, you can create a transport rule such as follows to achieve your goal.
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact 
    [email protected]
    Amy Wang
    TechNet Community Support

  • Something interesting with check rule for VAT registration no.

    Hi Guys,
    I found something weird in sap with check rule for VAT registration no.
    If I set any of check rules for US and save(tcode oy17), then change the country of a customer from DE to US and save(not change the VAT registration no), the system post error messages "ISO code DE is not correct in the VAT registration number". But if I set rule for AU(australia) with same rule as US, and change the customer's country from DE to AU(not change the VAT no), no error happens and customer can be saved successfully. So anybody can give any explanation on this problem?
    Thanks in advance, point will be rewared. Waiting for the comments.
    Regards,
    Alex

    <TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%"><tr><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=add2d1.jpg" name="add_QTB_5174" id="add_QTB_5174" onclick="javascript:addRowToTable('QTB_5174',4,22.5);return false;"/></td><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=delete2d.gif" alt="delete" name="delete_QTB_5174" id="delete_QTB_5174" onclick="javascript:removeRowFromTable('QTB_5174');return false;"/></td><td><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=edit2d.jpg" alt="edit" name="edit_QTB_5174" id="edit_QTB_5174" onclick="javascript:updateTableRow('QTB_5174',22.5);return false;"/></td></tr></table>
    <input type="hidden" value="QTB_5174" id="5174"><TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%" id="QTB_5174" name="QTB_5174">
    this a sample code. I have marked the name attrib in bold.

  • I haven't got the email for the developers for ios 7 beta 1 and i signed up for it at 3pm Est. it is now 10:32pm Est. Help?

    i haven't got the email for the developers for ios 7 beta 1 and i signed up

    Nobody here would know about that. We are users and Apple does not monitor this forum. You would have to take up that with Apple in the developer section of this site.

  • When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

    When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

    Read here:
    http://help.apple.com/ipad/8/#/iPad9a245e3e

  • I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

    I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

    If you didn’t erase the drive and install using you AppleID, then the OS and the purchased apps are still registered to the other AppleID. You cannot change that by logging into iCloud. Apps are forever tied to the AppleID used to purchase/download them.
    You have to erase the drive and download/install the Apps using your AppleID.

  • With the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

    with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

    update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • How do I put shortcuts to web sites in a (?) tool bar/browser bar...don't know what it is called. With IE, I can just drag the tab for the site to the area I want.

    How do I put shortcuts to web sites in a (?) tool bar/browser bar...don't know what it is called. With IE, I can just drag the tab for the site to the area I want

    Near the right-end of the address bar is a white star which can be difficult to see, but look closely. When you wish to bookmark a shortcut to the toolbar, double click the star. A window will open with the name of the webpage. Under that is the folder box which will probably read 'Unsorted Bookmarks'. Click the drop down arrow and change it to 'Bookmarks Toolbar' then click done.
    I have several folders on my toolbar such as Music, Mail, etc. in which I add multiple websites. If you wish to add a folder, click the second drop down arrow next to 'Bookmark Toolbar' and click 'New Folder' and give it a name.
    To add a bookmark to a folder, again double click the star, make sure you are in Bookmark Toolbar and click one of the two drop down arrows to find the name of the folder.
    For other bookmarks use Bookmark Menu. Whatever is added here can be accessed by Bookmarks on the Menu Bar. If your Menu Bar with Bookmark, File, View, etc. is not visible, click the Alt key and they will become visible. To keep the Menu Bar, click View, Toolbars and check Menu Bar.

  • Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

    Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for