Exchange 2010 - Error setting a new transport rule for email disclaimer

Hi
Trying to setup some additional email disclaimer rules on Hub transport under Org Config on exchange 2010. We allready have a few and they work ok, however we are trying to replace this woth some alternate ones and are getting the error
The length of the property is too long. the maximum length is 8192 and the length of the value provided is 8522.
Most of this length comes from the html code we are inserting into the disclaimer. I've reduced it by about as much as i can but it's still too large. Does anybody have any suggestions or know if it;s possible to increase the 8192 sixze limit ?
Regards
Roger

Hi Roger,
For AD replication packet the ideal size is 8K. Or the above error may occur due to build/design issues.
You can eliminate this size related issue by splitting the large rule into multiple rules. This size limit is Per Rule and does not add up for all rules.

Similar Messages

New business rules for email notification

I suggest adding 3 business rule: send an email notification when the rows was
successfully:
- added
- changed
- deleted
In the rule settings allow you to specify the email list; for example: [email protected], [email protected], [email protected]
from Moscow with money

Currently MDS can track changes on Attribute level, and you can create a business role which will be triggered if the attribute value is changed.
https://msdn.microsoft.com/en-us/library/hh479624.aspx

Exchange 2010 error Creating Contact

I get the below error when doing any action in 2010 EMC or via 2010 powershell. I also get it when moving mailbox from 2007 to Office 365. My setup is Exchange 2007 with an Exchange 2010 SP3 Hybrid server with HUB and CAS roles installed. I can create
this object in 2007 EMC or in ADUC.
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
UserX
Failed
Error:
Active Directory operation failed on xxx.xxx.local. This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
The user has insufficient access rights.
Click here for help... technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&t=exchgf1&e=ms.exch.err.Ex6AE46B
Exchange Management Shell command attempted:
New-MailContact -ExternalEmailAddress 'SMTP:[email protected] 'user user' -Alias 'user' -FirstName 'user' -Initials '' -LastName 'user' -OrganizationalUnit 'xxx.local/Contacts'
Elapsed Time: 00:00:00

Hi,
First, please make sure the account have these required permissions: Organization Management and Recipient Management.
Please check on your account in AD under advanced settings if the checkbox "Include inheritable permissions from this object's parent" is checked as this can cause problems when you perform Exchange tasks.
Have you tried to execute the Setup /PrepareAD command to check the result? This command will run the Forest Prep and Domain Prep for Exchange Environment and will re-add all the permissions to the Forest and Domain.
If no, it's worth to try it.
If the issue persists, to narrow down the issue, I need to clarify one thing.
Did you install Exchange 2010 using the split permissions model?
For the split permissions model, please refer to:
Understanding Split Permissions
Here is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/exchange/en-US/96fb93d7-ad47-4c12-a847-05b16fd57ace/exchange-2010-sp2-forest-level-win2008r2-errors-newmailbox-type-etc?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Transport Rule for recipients

I need to setup the following transport rule, Exchange 2010, and I can't get it to work.
If recipient domain is xyz.com, and other recipient domains exist in the email, then I need to send a disclaimer xyz.com recipients as well as the other recipients at different domains such as abc.com. I can get the disclaimer only to append to emails
going to xyz.com and not going to abc.com
Thanks

Hi Mike,
According to your descripton, I found that we want to append disclaimer to recipients which in xyz.com domain, even if the To or Cc fields contain abc.com domain or additional domains' recipients. Right? If I have any misunderstanding, please
correct me.
I suggest create a Transport Rule. Steps as below:
1. EMC
2. Organizatio Configuration -> Hub Transport -> Transport Rules -> New Transport Rule...
3. Name: xyzDisclaimer
    Comment: Appending to disclaimer to xyz.com ONLY
    Select the "Enable Rule" checkbox
    Next
4. Select condition(s): when a recipient's address contains specific words
    Editing: when a recipient's address contains 'xyz.com'
5. Select actions: append disclaimer test and fallback to action if unalbe to apply.
    Editing: 'append' 'text' and fallback to 'wrap\ignore\reject' if unable to apply.
6. Next -> Next -> Finish
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

Create Transport rule for restrict message size and send a rejected message CC: to Administrator

I want to create a Exchange Transport rule for message size restriction (10 MB) when message size is exceed to 10 MB it rejected by the Exchange server and
also rejected message CC: to Administrator. I also create it but unable to configure rejected message CC: to Administrator. Thanks.
Babu

Hi Babu,
I have some tests in my environment using Exchange 2013, you can create a transport rule such as follows to achieve your goal.
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
Gautam.75801

Hi,
We may need to create script based rule using PowerShell or VBScript.
Please go through the below links for command get-mailboxstatistics:
Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
Regards, Yan Li

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

Set a new expiry delay for entries added in the cache by a read through

Hi,
I have an application that uses an Oracle Coherence cache backed by a database. Each item that is added in the cache must have a custom expiry delay computed from its content.
Is it possible to set a new expiry delay for the entries loaded in the cache from the database by a read through operation?
I tried setting a new expiry delay in the load method of the BinaryEntryStore, but it is ignored and the default expiry of the corresponding cache is used instead. Also I tried using a MapTrigger, but the entries added in the cache by a read through operation are not intercepted by the MapTrigger.
Thanks,
Adrian

What we do (not sure if it proper way, but it worked for us) is extend the LocalCache and override the put method.
public Object put(
Object oKey,
Object oValue,
long expiry)
long newexpiry = xxxxx;
return super.put(oKey, oValue, newexpiry);
}

How use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

You must be using an update CD. You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol

How to assign a new transport request for a program saved in $tmp mode

Hi all,
How to assign a new transport request for a program saved in $tmp mode?

Hi,
delete the object fro the package $tmp.
go to change mode, save it.
while saving it will ask for teransport id.
thanks
vinod

Iphone will not show new message alert for email sent to subfolders

I have successfully synced my iphone with the exchange server so I am getting push email from entourage to my phone. However I have subfolders set up in entourage so that my email is organised. These subfolders are showing on my iphone. Although email sent to subfolders is pushed to the iphone (to the relevant subfolders), when the phone is on the home screen it does not show a new mail alert for those emails. It only shows a new mail alert for emails going to the main inbox. Obviously I need it to alert me if email is coming in to subfolders. Can anyone help with setting this up?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Renew SSL Certificate for for two Exchange 2010 Server and the new rules.

I find DigitCert's website always helpful with cert questions.They've got a pretty helpful page here: https://www.digicert.com/internal-names.htmIt looks like they've got a tool for Exchange, but I've not used it myself, so can't say if it works or how well: https://www.digicert.com/internal-domain-name-tool.htmI bet Microsoft have something on their website too that helps with this sort of question.I'd say you register a completely new domain and use that for public facing and internal servers. Or you could just create a sub domain of an existing one, i.e. subdomain.mydomain.com and use that, i.e. public_exchange.subdomain.mydomain.com and internal_exchange.subdomain.mydomain.com.

Hi there ,
My exchange 2010 Server Certificate is about to expire and i am going to renew it but according to the new rules for SSL Certificate Issuing we can not include our Local Servers Names and Local FQDN such as myserver.contoso.local, my issue is that i have 2 exchange servers one is internet-facing Server (where the certificate is initiated and installed) and one is non-internet-facing Exchange server.
if i am going to renew my certificate with public only name, I have to create a split Domain that reflects my external links to the internal Users, what shall i do for the non-internet-facing server? do i need to create another record in my split DNS Server and add it to my Certificate Request ?
This topic first appeared in the Spiceworks Community

Outlook 2013, Exchange 2010 error with Rules and Alerts

Hello,
I was recently informed by a user that when they open Outlook 2013 and click Manage Rules and Alerts, they get the following message:
By the way, NO Microsoft, this information is not helpful. Anyways, I found that the same problem is happening in my Outlook as well. I do not believe it is happening to all users' accounts, and I am able to set up Rules within Outlook Web Access,
so it seems to be some local setting. I found a lot of forums suggest running the Outlook /cleanrules switch, and this did not fix the problem. Other suggestions are to delete the profile on the computer and/or uninstall outlook and reinstall it.
I don't like these solutions, as they don't point to the true source of the problem and do nothing to help avoid this problem in the future. Has anybody else had this problem and been able to fix it? We are running Exchange 2010 in our environment,
although not sure if that makes a difference or not. Any answers that do not suggest the things I have already mentioned would be greatly appreciated!

Hi,
For this issue, I recommend you ask in Office forum which is staffed by more experts specializing in this kind of problems. You might get better help there.
http://social.technet.microsoft.com/Forums/office/en-us/home?forum=outlook
Thanks for your understanding.
Best regards,
Belinda Ma
TechNet Community Support

Exchange 2010 - Error setting a new transport rule for email disclaimer

Similar Messages

Maybe you are looking for