Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
thanks
Log Name: Application
Source: System.ServiceModel 3.0.0.0
Date: :
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: SYSTEM
Computer: FL-CAS1.WOMBAT.LOCAL
free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
thanks I have no idea how to fix
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
Exception: System.ServiceModel.ServiceActivationException:
The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation. The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
are [https].. ---> System.InvalidOperationException:
Could not find a base address that matches scheme http for the endpoint with binding
++++

Hi
This issue could be with corruption in Autodiscover and web services virtual directory
Replace Web.config file for Autodiscover and web services virtual directory from the other working site
Delete and Recreate Autodiscover and web services virtual directory
Do this only on the affected site
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Similar Messages

Exchange 2010 GAL Export script working from EMS but not as a scheduled task

I have been asked to get a script together to export the GAL on an Exchange 2010 server and then email it to a manager. I have been playing it with days, and have pruned it to the very minimum to at least try and get it working before improving it. At the
moment I have the text as below:
Del c:\GALexport.csv
Get-Recipient -ResultSize unlimited | where {$_.HiddenFromAddressListsEnabled -eq $false} | Select DisplayName,PrimarySMTPAddress,sAMAccountName,alias | Export-Csv "c:\GALexport.csv"
This works just fine in Exchange Management Shell and deletes the previous report before creating a new one. However, when I set it up as a scheulded task, it does nothing.
The task is set up as follows:
Action - Start a Program
Program/ Script C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe
Add arguments -version 2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
This is set to run under my administrator account with the highest privileges and I have the logon as batch right.
Unfortunately, when I run it as a scheduled task, nothing happens. The last run result is (0x0) and in the history it says 'task completed', but no report is produced. Can anyone advise please?

Does it delete the c:\GALexport.csv file? If not, then its not even executing the ps1 script...
- Open cmd prompt and run below command to confirm that there isn't any typo or any other small error...
C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -version
2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
- If above works then something wrong with task scheduler configuration...
Blog |
Get Your Exchange Powershell Tip of the Day from here

Outlook 2013/Exchange 2010 Free/Busy access issues.

Good Day Everyone,
I am running a Win 2008 R2 environment with Win7 users, using Exchange 2010 and Outlook 2013. Last week my users started experiencing issues with being able to view Free/Busy in the Calendar for any other user. I have checked past issues with this with patches
KB 2837618 and KB 2837643. Neither patch is showing as installed and I have tried a nummber of the suggested fixes offered for that issue to no avail. OWA seems to be working just fine.
Our Outlook version is: 15.0.4605.1003
I need a fix for Outlook users and since I havve 140 users, individual fixes are a not realistic option.
Any assistance would be greatly appreciated.

Hi,
Please test if Out of Office feature works well in Outlook. If Out of Office doesn't work either, it should be Autodiscover related.
Once Autodiscover has not been configured properly, the Free/Busy information may not display correctly. If you are also seeing issues with Out of Office assistant, we may assume that you haven’t correctly setup Autodiscover, since these two symtoms are
common when Autodiscover is not configured correctly.
To verify that, please test Outlook Autodiscover Connectivity:
http://technet.microsoft.com/en-us/library/bb123573.aspx
We can also learn Configure Exchange Services for the Autodiscover Service from:
http://technet.microsoft.com/en-us/library/bb201695.aspx
Regards,
Melon Chen
TechNet Community Support

Exchange 2010 Free/Busy Federation with vendor's Office 365 tenant

Here the situation,
ORG A
====
Exchange 2010 SP3 On-premise. No externally accessible CAS available/published (we are very secure and require VPN for Outlook/OWA from home/outside network)
ORG B
====
Office 365
ASK
===
ORG B is a vendor for ORG A and we would like to have federated free/busy sharing between the two organizations. I have read the steps about setting up a federation trust, configuring org relationships both ways, configuring autodiscover on our end.
My specific questions are,
1. Currently we don't have any externally published CAS servers. My assumption is we need atleast one (and probably more for fault tolerance) for federated free/busy sharing correct? We obviously don't want to place this in the DMZ/externally...so what are
the recommended configuration? Publish the CAS externally? Any other more secure recommendations? We don't have TMG or any other Microsoft solution for that purpose...are there any other options? We use Cisco IronPorts for inbound/outbound email.
2. Does this coexistence server have to be Exchange 2013 or will Exchange 2010 sp3 suffice?
3. Are there any other methods of accomplishing this ask? We don't want users to have to individually share calendars...so internet calendar sharing is out of the question.

Hi,
If the organization receives or sends Internet e-mail for the domain, we need to
configure an
internet facing CAS server.
For your reference, here are some articles that may be helpful to you:
Exchange 2010 SP1 and Exchange Online (Office 365) Calendaring:
http://blogs.technet.com/b/exchange/archive/2011/02/16/3412010.aspx
Federation in Office 365 and Exchange
http://community.office365.com/en-us/wikis/exchange/federation-in-office-365-and-exchange.aspx
Create a Federation Trust
http://technet.microsoft.com/en-us/library/dd335198.aspx
Thanks,
Winnie Liang
TechNet Community Support

PIX 501 config - access to internal network not working from remote VPN users - everything on the inside is OK

One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.
Some other info from the client end:
I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
Also Tunnel received 0 and sent 115119
Encryption is 168-bit 3-DES
Authentication is HMAC-SHA1
also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
also Transparent tunneling is selcted but in the stats it states it is inactive
I am connecting with the Cisco VPN Client Ver 5.0.07.0440
This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
I need to see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
I still cannot seem to find the issue with this config and any help will be greatly appreciated.
This is the config
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password somepassword
hostname hostname
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group network internal_trusted_net
network-object 192.168.40.0 255.255.255.0
object-group icmp-type icmp_outside
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
icmp-object source-quench
access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list OutToIn permit ip any any
access-list outbound permit ip any any
(NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.40.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
pdm history enable
arp timeout 14400
global (outside) 1 interface
I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside it still does not work.
nat (inside) 0 access-list no_nat_inside
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_outside_in in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.40.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community $XXXXXX$
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
crypto dynamic-map clientmap 50 set transform-set 3des_strong
crypto map vpn 50 ipsec-isakmp dynamic clientmap
crypto map vpn client configuration address initiate
crypto map vpn client configuration address respond
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp identity address
isakmp client configuration address-pool local vpn_client_pool outside
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup remote-vpn split-tunnel split_tunnel
vpngroup remote-vpn idle-time 10800
vpngroup remote-vpn password ANOTHER PASSWORD
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.40.0 255.255.255.0 inside
ssh timeout 30
console timeout 60
dhcpd address 192.168.40.100-192.168.40.131 inside
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username AUSER password PASSWORD privilege 15
terminal width 80
****************** End of config
I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network) was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
Thank you once again.

Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Front and rear cameras not working since i reformatted ipad mini. updated version. checked settings could not find how to activate camera. no icon appears.

i've searched and searched but could not find any answer why front and rear camera's aren't working.
i did a reformat because my id would not accept the password that i've been using. then after the reformat i could not see the icon anymore.
went to settings under photos and camera and could not find a button for the camera.
i do not have facetime. it's gone as well. what do i do?

Look under settings, general, restrictions and see if facetime and the camera have been turned off.

Itunes not working for windows 8.1 it shows that installation package could not be opened

last night I have updated my windows 8 to 8.1.When I started to installed Itunes 11.1.5.5 it says that 'The installation package could not be opened.Verify that the package exists and that you can access it,or contact the application vendor to verify that it is a valid windows installer package.'I also downloaded Itunes multiple times but it shows the same.Please anyone help me Im in a real urgency.

i've found something http://download.lenovo.com/lenovo/content/windows8-1/upgrade/ideapad/index_en.ht ml
1. Model compatibility
- Ideapad can only support the current preloaded hardware and software configuration. Therefore, depending on a specific configuration, it might not be recommended to upgrade your computer. That is because some hardware issues cannot be resolved currently.
It is not recommended to upgrade the following models to Windows® 8.1 because some VGA related issues cannot be solved by the vendor, currently.
U310, U410, U510, U410 Touch, U310 Touch;
Z500 Touch, Z500, Z400, Z400 Touch, Z380, Z480, Z580, Z485, Z585;
S300, S400, S400u, S400 Touch, S405, S206, G485, G585, N480
I should have read this before updating lol .... i hate my self right now lol

Ldapmodify not working from remote host

I have an aci on my Groups for class_admin
(targetattr = "*")
(target = "ldap:///ou=Groups, o=domain,dc=dom,dc=example,dc=com")
(version 3.0;
acl "class_admin for dynamic parent/student email groups";
allow (all,import)
(userdn = "ldap:///uid=class_admin, ou=people, o=domain, dc=dom,dc=example,dc=com") and
(dns="remote-server.domain.com")
When I run this from the host that the DS is running on, it works fine, but when I run it from the remote host, "remote-server.domain.com" I get "ldap_add: Insufficient access (50)
additional info: Insufficient 'add' privilege to add the entry"
ldapmodify -h $host -D "uid=class_admin,ou=people,o=domain, dc=dom,dc=example,dc=com -w $password -a -f /tmp/gun.ldif
Edited by: knabe_t on Sep 21, 2007 10:20 PM

Hi,
it should work ...if remote-server.domain.com is located in same domain as DS host.
Stefan

While trying to sync my new nano Iget repeated messages saying I cant copy because I do not have enough access priveleges. Then the next message is could not copy a particular track because of unknown error -5000. I ok these messages 50 times until it st

I cant get out of Itunes and usually have to restart windows after this happens.

Are you using the latest version of iTunes?
See if there is a solution in the PDF user manual: iPod Manuals

HT1923 It did not work and I am still getting the error message

It did not work and I am still getting the error message" iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes.

I want to sync my iPad Mini with Outlook 2007. I installed iTunes and got the error message below:
iTunes was not properly installed. If you wish to import or burn CDs you will need to reinstall i Tunes.
So I tried to fix the problem and followed the instructions on the article below.
iTunes for Windows: "Registry settings" warning when opening iTunes at http://support.apple.com/kb/ts3299
That did not work and now my CD Drive is missing so I followed the instructions on the article below.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install at http://support.apple.com/kb/TS2308
So now I have a missing CD Drive and iTunes till does not work. Can someone please help!

WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
    <services>
      
      <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
        <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
        
      </service>
    </services>
</system.serviceModel>
    <system.webServer>
        <security>
            <authorization>
                <remove users="*" roles="" verbs="" />
                <add accessType="Allow" users="myCustomer" />
            </authorization>
        </security>
    </system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
   System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
   System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
   System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
   System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
   System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +901424
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272

When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

I get a message of "Could not find installation information for this machine." after trying to Reinstall Mac OS X.

I would like to repartition the Main HD to two Partitions but could not do so and keep on getting an error message of "Could not unmount disc.." so I tried choosing the "Macintosh HD" partition and tried Partitioning it but the option is not available. So to my frustration I tried clicking on "Erase" to see whether doing so would allow me to finally partition my HD but still can't. And now since I erased my Macintosh HD partition I could no longer boot to Lion.
Before doing the above steps I downloaded the Lion Recovery Disc Assistant and created an external Recovery HD using an 8GB flash drive. I used this as startup destination by choosing it as boot destination from pressing Option before startup. I tried using Mac OS X Utilities to Reinstall Mac OS X from the external drive but I only get "Could not find installation information for this machine." message. I also tried booting from the Recovery HD partition on the HD but i also get the same message.
I have a new iMac that came with OS X Lion 10.7.
Anybody have idea how to fix this?

Partitioning on-the-fly may fail if the disk is too fragmented. You cannot run Erase for the internal disk as it contains its system components. The same if trying to run Boot Camp in order to create the Windows partition, it may fail if disk is too fragmented.
If I correctly understand what you want, then you must boot from an external disk, therefore copy Lion to a 4 GB (or higher) flash drive, run the installer, and then choose the option to partition the disk, this is done after rebooting into the installer from the external drive. You cannot do that if the Lion installer is on the internal drive as it cannot erase or repartition itself.
If this fails (did you try this?), then perhaps you can try to create a Lion boot flash or DVD by using a non-Apple app called Lion DiskMaker, when ready restart, after chime press option / alt key, then choose to boot from this newly created boot disk or flash drive. This reportedly works OK (tried with an older version of Lion, not recently, was OK). It is better to work with a flash drive, Lion is not optimized to run from optical media.
WARNING: disregarding the method, you MUST always back up your data when repartitioning or installing / reinstalling.
Hope this helps to solve you issue. Before any attempt, backup, backup, backup.

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

SMB not working from outside the local network

Hi guys..
I've set up a storage server so that users can log in remotely and access their files. I have two connections I want to use, AFP and SMB. The AFP connections work great. No matter where our mac users are, they can log in through the net and get to their shares.
With SMB, I'm currently having a nightmare! I can't log in from other internet connections. I've checked and double checked routers, ports, etc. I have even turned everything (in terms of firewalls) off for testing. Still nothing with SMB. BUT - If I connect to the same machine with smb://127.0.0.1/ I can log in fine. If I try to connect with smb://<server ip address> then it still doesn't work.
I either get one of these 2 messages:
Data could not be read or written.
Username and Password are incorrect (even though I havn't supplied a username or password yet!)
Any help will be golden! Thanks a lot!
-Mel

Thanks a lot for the feedback.. Turns out the connection i'm testing it on (Virgin Media) does block SMB (port 445). Before I look into VPN, is it possible to change the port that SMB is operating on?
Is it easy to log in with VPN through WindowsXP? Can I send a similar string like smb:user:password@server to gain access to a VPN share through windows? Even through cmd will be fine as I intend on writing a program that can do that. I just need to know if it's possible. As I said, forgive my stupidity, I've never setup VPN before.. I think it's the only thing I havn't really dabbled in yet..
Thanks!
-Mel

Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

Similar Messages

Maybe you are looking for