Exchange 2010- I have current setup of hosted Exchange 2010 without SP1 installed.

I manually used AD to manipulate the hosted tenants security settings, so that databases cant see each other on the same box, I'm not sure if upgrading to Exchange 2010 sp1 will cause an issue with my current setup?
Afraid to pull the trigger.......

What if you run into any issue Exchange 2010 without any service pack? RTM version, SP1 and SP2 are not supported anymore so you need to go to at least SP3 to be on supported version...

Similar Messages

Does the Flashback malware have an effect on OS X systems without java installed?

Does the Flashback malware have an effect on OS X systems without java installed? Just asking since i do not have java installed...

It's not likely, but better safe than sorry. See
Helpful Links Regarding Flashback Trojan
Visit Thomas Reed's site for insight and help: Mac Malware Guide
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started. However, be careful about what you do as new variants of the malware circumvent the efforts of earlier tools.
Also see Apple's article About Flashback malware.
Apple has released Java updates for Snow Leopard and Lion users:
Java for OS X Lion 2012-003; available only for users of Lion with Java installed.
Java for Mac OS X 10.6 Update 8; available only for users of Snow Leopard.
Flashback malware removal tool; available only for users of Lion without Java installed.
Install whichever shows up in Software Update. It removes the malware (if present), updates Java (if present) and tightens up Java settings for the future. You may download from Apple's web site instead of using Software Update, but it's important to know which one to get, because the other two won't work for you.
For the truly paranoid see 10 Simple Tips for Boosting The Security Of Your Mac.

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Execution of Coded UI scripts with least possible test execution time in Windows7 Operating system using Visual Studio Test Agent 2010 without VS2010 installed

Hi All,
We are trying to execute coded UI scripts without Visual Studio installed. We are using “Visual Studio Test Agent 2010” for executing coded UI scripts without VS2010 in Windows 7, it is working fine. Also we verified executing the same script with VS2010
Premium, it works fine as well.
Here the challenge we are facing is with the Test execution time.
When we run the coded UI script with IE11-Windows 7 OS-Visual Studio 2010 Premium it takes
3min 36sec to complete the execution whereas with IE11-Windows 7 OS-Visual Studio Test Agent 2010 it takes
6min 40sec for the same script to execute (which is almost double the time it takes while executing using VS2010).
My question is what may be the reason for this difference? and how we can reduce the test execution time when running from Test Agent 2010?
Kindly let us know what is the best practice to execute the coded UI scripts with least test execution time in Windows 7 Operating system using Visual Studio Test Agent 2010 without VS2010
installed.
Looking forward for your positive response.
Thanks in advance..!!

Tina-Shi, Thanks for the information.
As you mentioned, we tried to execute the coded UI test using Mstest.exe in command on VS2010 Premium and checked on the execution
time, there was a slight difference.
Please find below execution time.
Using Mstest.exe in command on VS2010 Premium/Win7 – 3.47 minutes
Using VS2010 Premium/Win7 – 3.53 minutes
Using Test Agent/Win7 – 7.3 minutes
Also, I closed all the other processes in Task manager before starting up the execution.
Still , I am facing the same Issue. Could you please suggest any other way to reduce the scripting time of coded UI script execution
through Test agent 2010.
Looking forward for your earliest response.

How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HH

Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

FIM 2010 R2 SP1 - Installing CA Modules

I have a customer with on a CA running on Windows Server 2008 Standard edition - when trying to install the CA modules in as part of a CM deployment I get an error saying "This software requires Microsoft Windows Enterprise or Datacenter Edition".
I have not been able to find any documentation to explain this limitation; does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
Thanks

On Fri, 28 Mar 2014 20:39:55 +0000, cjprescott wrote:
I have not been able to find any documentation to explain this limitation; does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
http://technet.microsoft.com/en-us/library/gg418594%28v=ws.10%29.aspx
Look at the Software requirements for FIM CM Infrastructure table.
As long as the subordinate CA is the one on which you want FIM CM to manage
certificates, then yes.
Paul Adare - FIM CM MVP
AAAAAA - American Association Against Acronym Abuse Anonymous.

HT201269 I have already setup my new iPhone 5s without using restore iphone 3. Now, how can I get my messages on iPhone 3 to my I phone 5.

I just setup my iphone5s, but I didn't use restore backup from the menu option, I rather chose setup my iPhone. Now I need all the messages on my iPhone 3. What do I do?

you can choose to restore from the older phone when you connect your iphone5 by cable and start itunes on the computer and navigate to the iphone and click the restore buttom then you can choose the iphone3's backup
or you can google
iphone backup restore sms
there are many third party programs which let you backup and restore sms's from iphones

Exchange Server 2013 SP1 Install on Windows Server 2012 R2

I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.

Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic

QUESTION: How to re-register setup billing/payment account without losing installed apps?

Unable to buy anything on my Touchpad app catalog. Error PMT03043 when trying to buy. How to clear existing catalog account and set it up again - hope this solves the problem ? There's no billing info set up in the existing account. App catalog does not allow to set up billing/payment info later if not done the first time.
Post relates to: HP TouchPad (WiFi)

Try these steps to remove the billing acct.
Open App Catalog > application menu > Preferences & Accounts.
In Password Is Required, select one of the following:
Once every 4 hours:You must enter your password the first time you make a purchase. If you make any other purchases within 4 hours, you don’t need to enter your password again. After 4 hours, you must enter your password again for the first purchase, which starts a new 4-hour clock.
Every Purchase: You must enter your password for each purchase, regardless of the time interval.
Under Send Email, change the email address to which receipts are sent.
To modify or remove an account, tap the account name.
Enter your HP webOS Account password and tap Submit.
When the credit card information appears, do one of the following:
Tap the information you want to update, make the change, and then tap Submit.
Tap Remove Account and then confirm the deletion.
Once removed, setup the billing acct. again.
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/touchpad/touchpad/wifi/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

How can OS X Server email be setup with hosted email?

We are a small business with our email hosted by an ISP. We are happy with this arrangement and don't want to bring email in-house. However, we would like to be able to setup email (on OS X Server) so that we can access shared email accounts (eg. info@... and sales@....) from any Mac on our network.
I know we can setup each Mac to access the hosted email account but this is not ideal because when one of us reads an email its marked as read on the hosted server but if the email has already been sent to the second client it will not show up as read there. Likewise, we can't see each other's replies or saved mail because these are saved in the mailbox on each Mac client. Whereas, if the Mac clients were both reading the shared email account from the same mailbox on the OS X Server, this problem would be eliminated.
I was thinking that the OS X Server email would enable us to do this but can't work out how.

Camelot - thanks for your reply. I'm not sure though if I posed my question clearly/correctly though.
I also work with a company who use Outlook on Windows and they have recently setup something similar to what I'm looking for:
a) they have Public Folders in Outlook - can Mail do this?
b) they have setup Outlook in I guess a relayed sort of way, whereby the hosted mail is downloaded by the Outlook server and each client then reads from their mailboxes on the server and replies via the server back to the hosted email. This has a couple of advantages (eg. only have to setup the hosted email details in one place, rather than on every client) but in particular it means that when on their network you can logon from any computer and open your local mailbox to read email, see your saved emails & replies (which aren't all saved on the hosted email), etc.
If OS X Server mail could do either a) or b) I think it would give us the functionality we want. With b) we could access a mailbox on the server from any client rather than having to duplicate mailboxes on each client (and hence them getting inconsistent).

I have just setup an exchange mail account on my iphone and many of my settings have defaulted. Was this set by my business or by exchange?

I have just setup an exchange mail account on my iphone to acces smy business emails and many of my settings have defaulted. As an example, my passcode has defaulted to a minimum of 6 digits and my phone will erase all data after 10 failed attempts. These are now greyed out and I cannot change them.
Is this a default set by Apple/Microsoft?
Or was this a setting enforced by my company, whose mail exchange I am accessing?

ditto what KT said...the passcode requirement enables the encryption of the local storage of your device and auditing of that policy ..it protects your organization AND you from potential data loss and a mandatory reporting obligation..imagine how miserable it would be to see the name of your organization on the front page of your local newspaper with a story about data loss....every IT and risk management department's worst nightmare

SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
Voon

Thank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

Where I have to give the host string name of oracle server in WSAD?

hi,
I setup the oracle in my WSAD.But,Its giving below error.
[3/16/06 13:25:41:332 SGT] 3e75fec4 WsServer A WSVR0001I: Server server1 open for e-business
[3/16/06 13:25:42:535 SGT] 68bb7ec6 WebGroup I SRVE0180I: [Sample] [Sample] [Servlet.LOG]: ResultData: init
[3/16/06 13:25:42:551 SGT] 68bb7ec6 SystemOut O the connection started
[3/16/06 13:25:42:551 SGT] 68bb7ec6 SystemOut O no connection
[3/16/06 13:25:43:535 SGT] 68bb7ec6 ConnectionFac I J2CA0122I: Resource reference jdbc/MyDataSource could not be located, so default values of the following are used: [Resource-ref settings]
     res-auth: 1 (APPLICATION)
     res-isolation-level: 0 (TRANSACTION_NONE)
     res-sharing-scope: true (SHAREABLE)
     res-resolution-control: 999 (undefined)
[Other attributes]
isCMP1_x: false (not CMP1.x)
isJMS: false (not JMS)
[3/16/06 13:25:44:285 SGT] 68bb7ec6 FreePool E J2CA0046E: Method createManagedConnctionWithMCWrapper caught an exception during creation of the ManagedConnection for resource jdbc/MyDataSource, throwing ResourceAllocationException. Original exception: com.ibm.ws.exception.WsException: DSRA8100E: Unable to get a PooledConnection from the DataSource.
     at com.ibm.ws.rsadapter.exceptions.DataStoreAdapterException.<init>(DataStoreAdapterException.java:244)
     at com.ibm.ws.rsadapter.exceptions.Dat
[3/16/06 13:25:44:426 SGT] 68bb7ec6 SystemErr R      at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:109)
[3/16/06 13:25:44:426 SGT] 68bb7ec6 SystemErr R      at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:77)
[3/16/06 13:25:44:426 SGT] 68bb7ec6 SystemErr R [3/16/06 13:25:44:426 SGT] 68bb7ec6 SystemOut O Error on find the database() : java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
SGGSGPTP31DT197.code1.emi.philips.com:1521:CESS
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:59)
[3/16/06 13:25:44:426 SGT] 68bb7ec6 SystemErr R      at com.ibm.ws.rsadapter.DSConfigurationHelper$1.run(DSConfigurationHelper.java:759)
[3/16/
But,I given correct URL.The URL I given is
jdbc:oracle:thin:@sggsgptp31dt197.code1.emi.philips.com:1521:CESS
sggsgptp31dt197.code1.emi.philips.com -- this is my host machine.
I think the problem with host string.
actually when we are trying to enter into the oracle sql,it asking the username,password and host string.I mentioned the username and password in variables tab.I don't know where I have to mention the host string name.
Please any one help on this.
Thank you,
D.Nagireddy.

I would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯

Need to update Exchange 2010 to SP1 from base

I need to update my base install of Exchange 2010 to SP1 and eventually SP2. This sits on a 2008 R2 server. in reading other upgrade articles, there are references to needing hotfixes at the server level - 2008 R2. There are about 5 hot fixes referenced
to upgrade to SP1 and I would assume there are a few others for the update to SP2.
Currently the 2008 R2 server is patched via Windows update through February 2014 (including SP1 for the server). Given that, can I assume that the hot fix updates have been incorporated into other updates/patches along the way for the Windows 2008 R2
server? Or do i still have to install each of those hotfixes manually?
Also, in one of the patches, it spoke of needing, or using .net framework 2.0 and 3.51. currently my system has 4.5.1 on it. do i need 2.0 and 3.51 for SP1 to be installed and work correctly?
thanks
dave

Hi Dave,
I recommend you install Exchange 2010 SP3 directly. There is no need to upgrade to Exchange 2010 SP1 and then to SP2.
Service Packs are cumulative, Exchange 2010 SP3 include all fixes included in previous RUs and service packs. Here is a blog for your reference.
Released: Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Since Windows updated through February 2014, you don't need to install each of those hotfixes manually.
Besides, I would like to verify if you download .net framework 4.5.1 from website. There is no need to install it that way. You just need to open Server Manager, add .Net Framework 3.5.1 feature.
Hope my clarification is helpful.
Best regards,
Amy
Amy Wang
TechNet Community Support

HT1766 How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out o

How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out of space

Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Exchange 2010- I have current setup of hosted Exchange 2010 without SP1 installed.

Similar Messages

Maybe you are looking for