Exchange 2010 IIS Redirect not working

Hi, this is our first time posting. Our http to https redirects in IIS seem to not want to work. Our setup before this happened consisted of the default website redirecting to "https://webmail.lsgnet.com/owa". This worked perfectly until the
installation of our new certificate. We have tried both the standard http redirect option under default website as well as a rule in the URL rewrite module. neither seem to want to work for redirecting to https. The HTTP redirect seems to *want* to work as
when its enabled, it successfully points "https://webmail.lsgnet.com" to https://webmail.lsgnet.com/owa". however it will not do the same for http (worked previously this way with old cert.) We attempted to disable the http redirect and instead
use the URL rewrite module following the instructions here: http://www.jppinto.com/2010/03/automatically-redirect-http-requests-to-https-on-iis7-using-url-rewrite-2-0/ but that doesn't work period. Bindings have been removed and re-added multiple times. Any
help would be greatly appreciated as we have scoured google and cannot find any solutions to this nor reasons why. Thanks much.

Hi,
From your description, I recommend you verify the following thing for troubleshooting:
Open IIS Manager, click Default Web Site -> OWA -> SSL Settings, please make sure "Require SSL" option is unchecked.
What's more, here is a thread for your reference.
Exchange 2010 http://domain.com/owa redirect to
https://domain.com/owa
http://social.technet.microsoft.com/Forums/en-US/7326eebc-3162-4366-84a4-ba23755686e5/exchange-2010-httpdomaincomowa-redirect-to-httpsdomaincomowa?forum=exchange2010
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

  • Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

    Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
    thanks 
    Log Name:      Application
    Source:        System.ServiceModel 3.0.0.0
    Date:         :
    Event ID:      3
    Task Category: WebHost
    Level:         Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      FL-CAS1.WOMBAT.LOCAL
    free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
    thanks I have no idea how to fix 
    Description:
    WebHost failed to process a request.
    Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
    Exception: System.ServiceModel.ServiceActivationException:
    The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation.  The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
    are [https].. ---> System.InvalidOperationException:
    Could not find a base address that matches scheme http for the endpoint with binding
    ++++

    Hi 
    This issue could be with corruption in  Autodiscover and web services virtual directory 
    Replace Web.config file for Autodiscover and web services virtual directory from the other working site
    Delete and Recreate  Autodiscover and web services virtual directory 
    Do this only  on the affected site 
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Exchange 2010 CAS Proxy not working

    The internet facing CAS server has internal and external url as
    https://mail.domain.com/owa
    The non internet facing CAS server has internal url
    https://servername.domain.com/owa, with windows integrated authenticaion set. No external url set.
    When I try to use OWA to access a user's mailbox that is active on a mailbox server in the non internet AD site using
    https://mail.domain.com/owa , I get the following error:
    The mailbox you're trying to access isn't available
    No Client Access server or front-end server with a matching version was found to handle the request.
    Exception message: The CAS server is most likely not configured for SSL (it returned a 403)
    However, All Exchange servers are running the same version.
    If I try to access the user's mailbox using
    https://servername.domain.com/owa it works fine
    Anand_N

    Hi,
    Check the event viewer application logs.
    I have seen the same issue and the resolution is given in the event logs.
    I think you might have to change the SSL settings on the non-internet facing CAS or there is some regisrty settings.
    AllowProxyingWithoutSSL
    Also, check below link
    http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_26671364.html
    http://www.tech-archive.net/Archive/Exchange/microsoft.public.exchange.setup/2013-02/msg00000.html

  • Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

    Hello, 
    I currently have  windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions  
    For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM. 
    As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.    
    Using an RDP client( v8.1)  I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs 
    and I can use the device without any issues. 
    However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client)  but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
    Because I have ran all updates the rdp version on the VM is running v8.1.
    Previous to installing the updates USBr still was not working
    I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM : 
    RDP 8.0 -- Enabled
    Configure RFX -- Enabled
    Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
    Many Thanks 
    Brian 

    Hi,
    According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
    Server6: Conversion is not supported in restricted language mode or a Data section.
    Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
    Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
    For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
    Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
    By the way, from Technet:
    You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
    Client Access Permissions
    http://technet.microsoft.com/en-us/library/dd638131.aspx
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

    SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
    Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
    I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
    Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
    Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
    Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
    Thanks!

    WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
    running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
    the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
    these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
    it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
    basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
    so if anyone else has the same problem or any advice on how to fix the problem, please comment.

  • Exchange 2013 CU2 OWA Redirection not working

    Hi,
    I installed Exchange 2013 RTM in existing environment with Exchange 2010 Sp3 in our test environment.  After installing Exchange 2013 RTM I checked when I access OWA using Internal URl it redirected to Exchange 2010 CAS server's Internal URL and I was
    able to access Exchange 2010 mailbox.
    I upgraded to CU2 and now Exchange 2013 internal URl not re-directing it to Exchange 2010 mailbox anymore. I checked all the settings on virtual directories and made sure that FBA authentication is selected.  It is a test environment and I just wanted
    to test the re-direction in co-existence environment using Internal URL. It should work out of the box but not sure what happened.  There was no issue in CU2 instllation.
    Exchange 2013 CAS and mailbox roles are on separate servers.  Same with Exchange 2010.  There is no certificate 3rd party certificate install on CAS servers since it is a test environment.
    Not sure what else can I check.
    I appreciate if any help I can get.
    Thanks,
    Regards
    Raman
    Raman

    I have been seeing issue where 2013 OWA was not re-directing to Exchange 2013, as mentioned on top of this thread.  After spending days over it.
    Finally it resolved for me after doing the following: -
    Go to CAS 2010 IIS
    OWA directory -> Authentication -> Windows Authentication -> Add provider
    Negotiate and NTLM.
    Although, now when I click on "Options" once OWA is redirected to 2010.  ECP does
    not work.  It just open up ECP page but no link works not even sign out.  I had to click back on the browser's back button go get back to main OWA mail page.
    OWA and ECP directory settings are same.  I have checked several times.
    Thanks,
    Raman

  • Exchange 2010 GAL Export script working from EMS but not as a scheduled task

    I have been asked to get a script together to export the GAL on an Exchange 2010 server and then email it to a manager. I have been playing it with days, and have pruned it to the very minimum to at least try and get it working before improving it. At the
    moment I have the text as below:
    Del c:\GALexport.csv
    Get-Recipient -ResultSize unlimited | where {$_.HiddenFromAddressListsEnabled -eq $false} | Select DisplayName,PrimarySMTPAddress,sAMAccountName,alias | Export-Csv "c:\GALexport.csv"
    This works just fine in Exchange Management Shell and deletes the previous report before creating a new one. However, when I set it up as a scheulded task, it does nothing.
    The task is set up as follows:
    Action - Start a Program
    Program/ Script C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe
    Add arguments -version 2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
    This is set to run under my administrator account with the highest privileges and I have the logon as batch right.
    Unfortunately, when I run it as a scheduled task, nothing happens. The last run result is (0x0) and in the history it says 'task completed', but no report is produced. Can anyone advise please?

    Does it delete the c:\GALexport.csv file? If not, then its not even executing the ps1 script...
    - Open cmd prompt and run below command to confirm that there isn't any typo or any other small error...
    C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -version
    2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
    - If above works then something wrong with task scheduler configuration...
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Apple Mail and Exchange Out of Office Not Working

    Has anyone had issues with Yosemite Mail and setting Out of Office for Exchange 2010?
    I can set Mail to send Out of Office replies but cannot change the scheduled dates from 2/12/1982, 10:00 AM. Even when I do set it, it does not seem to send the OOO notifications. I can set it just fine on my iPhone 6 and Mavericks Mail worked fine for setting the OOO.
    I deleted my account several times and reset it and I can get all my Mail back just fine but OOO still doesn't work correctly. I wanted to try to change the server settings but Mail doesn't allow you to do that for auto connect Exchange accounts.
    Because of this (and my concern with reported issues with updating meetings), I switched back to Outlook 2011 until these bugs get ironed out. This is too bad because I love the notifications feature for Apple's programs.
    I'm running on a 2014 13" MacBook Pro.

    Same issue here. I can see these error messages repeating when I'm trying to change the date.
    2014-12-11 02:29:23,447 Mail[87049]: (
      0   CoreFoundation                      0x00007fff900d564c __exceptionPreprocess + 172
      1   libobjc.A.dylib                     0x00007fff990b86de objc_exception_throw + 43
      2   CoreFoundation                      0x00007fff900d86bd -[NSObject(NSObject) doesNotRecognizeSelector:] + 205
      3   CoreFoundation                      0x00007fff9001fa84 ___forwarding___ + 1028
      4   CoreFoundation                      0x00007fff9001f5f8 _CF_forwarding_prep_0 + 120
      5   AppKit                              0x00007fff8f1e61de -[NSDatePickerCell(NSInternal) _constrainAndSetDateValue:timeInterval:sendActionIfChanged:beepIfNoChange:retur nCalendarToHomeMonth:preserveFractionalSeconds:] + 259
      6   AppKit                              0x00007fff8f1ea5da -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _commitSubfieldFieldChanges] + 1292
      7   AppKit                              0x00007fff8f1e6528 -[NSDatePickerCell(NSInternal) _finishPendingEdit] + 53
      8   AppKit                              0x00007fff8f1e969d -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _textFieldWithStepperTrackMouse:inRect:ofView:untilMouseUp:] + 648
      9   AppKit                              0x00007fff8f1e51c8 -[NSDatePickerCell trackMouse:inRect:ofView:untilMouseUp:] + 159
      10  AppKit                              0x00007fff8f018139 -[NSControl mouseDown:] + 714
      11  AppKit                              0x00007fff8f511f4f -[NSWindow _reallySendEvent:] + 12827
      12  AppKit                              0x00007fff8ef9c50c -[NSWindow sendEvent:] + 368
      13  AppKit                              0x00007fff8ef4e096 -[NSApplication sendEvent:] + 2238
      14  Mail                                0x0000000106c767d0 Mail + 272336
      15  AppKit                              0x00007fff8eddae98 -[NSApplication run] + 711
      16  AppKit                              0x00007fff8edc62d4 NSApplicationMain + 1832
      17  libdyld.dylib                       0x00007fff8fbe05c9 start + 1
      18  ???                                 0x0000000000000001 0x0 + 1
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0

  • Response.Redirect not working after printing CR

    Using Visual Studio 2010 sp1 with Crystal for VS 2010. Web app running as a web application in x86 mode  using .NET 4.0 framework.
    I recently created a CR with a sub-report and it previews and prints just fine.  However, after I PRINT the report, my code behind in the ASPX file is not recognized and thus fails. 
    For example, I created a 'Back' button to redirect the CR aspx back to the calling aspx file and it works just fine if I only view the report.  If I click on the printer icon located on the report viewer toolbar, the button stops working.  In fact, none of the code behind syntax is recognized and the aspx file just does a page_load. 
    I know this code works because it does work if I DON"T print the report:
        protected void btnBack_Click(object sender, EventArgs e)
            Response.Redirect("~/NewCase.aspx");
    I also have a 'Submit' button that changes the data parameters for the report and it works great but after I print the report, it will not work either.   (I've tried to upgrade to sp2 but I get an error with the installation process... so still trying to figure that out.)
        protected void btnSubmit_Click(object sender, EventArgs e)
            CrystalReportViewer1.RefreshReport();
    To summarize,  All the code I listed works fine if I do not try to print the report and just view it.  After I click the printer icon, the code stops being recognized and the aspx page just refreshes. 
    I've searched for help on the web for a couple of days to no avail; so I am thinking it must be some issue with the report viewer. 
    Any help would be greatly appreciated.
    Paul

    Not a problem. Something like what is described in the following should help (from the easiest to the more complicated):
    [1411677 - Blank first page in Visual Studio .NET application using the Crystal Reports DHTML viewer|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313331333633373337%7D.do]
    [1625033 - Page navigation button does not work as required using Crystal Report .NET web application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633323335333033333333%7D.do]
    [1670041 - How to persist Crystal Reports using Cache in a custom .NET web application?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633373330333033343331%7D.do]
    - Ludek

  • Exchange Outlook Anywhere does not work!

    Hi,
    Im having issues to get the Outlook Anywhere to work.
    Running Exchange 2010 SP2 with RU1 (two HT/CAS/MBX servers) + TMG + HL.
    I have a Geotrust SAN certificate (autodiscover.company.com, mail.company.com, mapi.company.local, legacy.company.com + fqdn of the servers)
    CASArray = mapi.comany.local = HL
    Outlook Anywhere is configured: mail.company.com / basic auth
    All DNS records that are included in the certificate are pointed towards TMG.
    TMG should be configured accordingly aswell as our HL. (have asked our guys to verify this several times...but you never know)
    from testexchangeconnectivity.com I have various results.
    If running RPC/HTTP test with manual specifications it fails...
    RPC proxy server: mail.company.com
    Exchange Server: mail.company.com or mapi.company.local
    msstd: mail.company.com
    but...
    If running the RPC/HTTP test with Exchange server specified as FQDN like SRV01.company.local it works?

    Hi again,
    RPC ports is set under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\RpcProxy, se a bunch of 6001, 6002 and 6004 that corresponds to my mapi.company.local, netbios names and more...
    these ports are only beeing used on the exchange server itself? they are capsuled in a 443 package passing through TMG and HL right?
    I can telnet via the HL on port 6001, result:
    ncacn_http/1.0
    HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy
    Value name: ValidPorts
    Value data: ExchangeServer :6001-6002; ExchangeServerFQDN
    :6001-6002; ExchangeServer :6004; ExchangeServerFQDN :6004
    Note:   *
    ExchangeServer should be the NetBIOS name of Mailbox server.
       * ExchangeServerFQDN
    should be the fully qualified domain name (FQDN) of Mailbox server.
    When you test in testexchangeconnectivity.com, the Exchange server should be the FQDN name instead of the external URL.
    So please change the registry key and reboot the server to take effert. And then try again to see if this works.
    Fiona Liao
    TechNet Community Support

  • Exchange 5.5 portles not working

    Environment: Portal 3.0.9/W2K -> IIS/W2K -> Exchange 5.5/NT
    I have followed the Exchange 5.5 Portlets installation instructions and troubleshooting guide completely but the portlets still do not work. I only see the "Update Login Information" link in place of the portlet -- even after I have entered Exchange credentials numerous times.
    At stage 5 of the installation when trying to log in from the externial application it did not show an inbox. It brought up another login page that was generated by the servlet and had none of the default values. Providing the same information to this page has no effect. In stage 5 it says I should see "part of an inbox"
    I have checked all the logs and see nothing unusual.
    I am out of ideas on what to do next.
    null

    John
    I found that if you follow the instructions and dont put in an entry for the mailbox value then it doesnt get passed along. I put in a value for every parameter and make them visible when creating the external app. This seems to allow the passing of the params and the inbox launches. Still doesnt fix the portlets but thats another issue.
    Also add the debuglevel=1 parameter to the initargs line in zone.properties, then check <server:port>/servlet/<servletalias> - should show available portlets

  • Exchange 2010 IIS Settings

    I'm going to be updating my Exchange 2010 instance to SP3 and the latest Rollup Update this weekend.  If memory serves me correctly, the IIS custom IIS settings get wiped away when this is done.  I'm referring to settings like https redirect.  Is
    there a way to easily reapply them afterwards?  Maybe copying my current web.config file?
    Thanks,
    Richard

    Hi Richard,
    Even though I don't find exacte resource to prove the web.config files contains IIS setting, however I find following blog:
    How to configure a HTTP endpoint for Exchange Web Services in Exchange 2010
    http://blogs.msdn.com/b/dvespa/archive/2009/12/22/how-to-configure-a-http-endpoint-for-exchange-web-services-in-exchange-2010.aspx
    In this blog, "At this point IIS should detect the change in the web.config and reload the settings.", it means that IIS will detect web.config to load the settings.
    If there is anything I have misunderstanded, please correct me.
    Thanks
    Mavis Huang
    TechNet Community Support

  • Exchange 2010 Sp2 - Does not audit Shared calender access

    I have Exchange 2010 sp2 , I have enabled mailbox audit on few mailbox , as well as MSExchange IS logs for logon event to expert.(event ID 1016), 
    I am trying to get folderbind events , from shared calender access , like Non-owner mailbox event or anything that I can run audit get the detail if non-owner accessed the calender or mailbox folder etc..
    I found changes are logged like create , delete or any changes but not folderbind
    i have following on to few mailboxes.
    AuditEnabled     : True
    AuditLogAgeLimit : 90.00:00:00
    AuditAdmin       : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
    AuditDelegate    : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
    AuditOwner       : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, Create}
    Can some one please  help me to find what is missing to get folderbind  audit events when any non-owner access anything like shared calender etc..
    Thank you 

    Hi ANdy,
    Yes we have the followed the same commands as mentioned in both the article and the PPT as well. But i got the errors as mentioned in my thread above.
    Databases were not getting mounted, even when i tried the resume command still it failed.
    regards
    abubakar
    Md.Abubakar Noorani IT Systems Engineer Serco Ltd.
    Ok, because that is the part I wasnt clear about. I assume that the servers in the DR site are not set for automatic activation, so in order for them to mount, you would have to clear that block.
    When you tried to move the databases to the DR site, you got the same error message as you got when you ran the restore-databaseavailibilitygroup command?
    So, is everything back to normal? Did you run test-replicationhealth before you failed over?
    Also, anything of use in the cluster logs? “cluster log /g”.  
    I assume the MAPI bindings and NICS are set correctly since this worked before.
    Twitter!:

  • Outlook 2010 advanced search not working

    We use Outlook 2010 32bit on Win 7 64bit machines, we are on a 2008r2 doamin and our Exchange server is 2010.  I have a user who's advanced search is not working, regular search seems to work just fine.  I have rebuilt the indexes, removed Outlook
    from the indexes and added it back in.  Nothing that I have done has corrected the problem.  Has anybody had a problem with advanced search in Outlook 2010, if so what did you do to fix it?  The user has a very large mailbox, about 10GB.
    Thanks
    Shaun
    Shaun Owens

    Hi,
    Try to Rebuild the index
    1. Click Start, in the Search box, type Indexing, and open Indexing Options under Control Panel.
    2. Click Advanced, click the Index Settings tab, and then click Rebuild.  If you are prompted for an administrator password or confirmation, type the password
    or provide confirmation.
    If it still not works, try to use following method. 
    Step 1: Check registry settings
    1. Click Start, in the Search box, type regedit and press Enter to open the registry editor.
    2. Locate the following registry subkeys:
    HKEY_LOCAL_MACHINESoftware\Policies\Microsoft\Windows\Search\PreventIndexingOutlook
    HKEY_LOCAL_MACHINESoftware\Policies\Microsoft\Windows\Search\PreventIndexingEmailAttachments
    3. Please first back up the registry subkeys above. Then, check if the value data is set to 1. If it is, please change it to 0, or delete the registry subkey.
    For more information, you can also refer to the following article:
    http://technet.microsoft.com/en-us/library/cc178983.aspx  
    Hope that helps.

  • Exchange 2010 Edge Transport - Not being detected by SCOM agent?

    All,
    I recently installed the SCOM 2007 R2 agent onto our Edge Transport server for Exchange 2010.  Our architecture is pretty simple.  We have a DMZ network where I have a SCOM 2007 R2 Gateway server and our Edge Transport server.
    Essentially it goes like this:
       Edge Transport Server Agent <-> Gateway Server <-> SCOM RMS server
    I have the Exchange 2010 and the FOPE for Exchange 2010 MP's loaded on our RMS server.  When I loaded the SCOM 2007 R2 agent onto our Edge server, the agent discovered it had FOPE and does reflect as such on the RMS server, but it did not seem to pick
    up that it was also the Exchange Edge Transport role.
    I looked on the RMS server in the Authoring -> Object Discoveries and the Edge transport is set to discover, so I am a little stumped as to why the agent didn't discover the role.
    Any suggestions where to look next?

    Just a little more detail on this.  I've been working on this exact issue for probably 3 weeks with an engineer. 
    This issue is actually a bug in the Exchange 2010 MP. 
    How is it a bug exactly?  Well, the MP is looking for the Active Directory site that the Edge Server is a member of... let's think about this, the Edge server is NOT domain joined, and as such, shouldn't have an active directory site. 
    Additionally, the regkey path referenced above is incorrect, though it seems that numerous others have figured that out on their own as well.  The correct regkey path should be:
    hklm>system>currentcontrolset >services>netlogon>parameters
    So sure, this "fixes" the issue - but the real issue is that the MP is looking for an Active Directory site, on servers that aren't a member of an active directory site. Kind of a BIG oversight by the MP authors in my opinion.
    I'm sure there are plenty of orgs relying on SCOM to monitor their Exchange 2010 implementations that don't even realize that their Edge servers aren't being monitored for the Exchange roles.

Maybe you are looking for