Exchange 2010 issues with emails attachments on phones
ok i have an issue with exchange 2010 server 2008 r2
i currently have 7 phones running activesync
only one phone has a problem sending attachments to other phones in the company....
however the phone can send regular email to any of the other phones without any problems.
I have exhausted my abilities to figure out what is going on and at this point Im lost which has never happened before
I mirrored the setting on another phone to the one with the problems and still no difference
I also changed to the readahead size notifications to 20mb
and unrestricted retrieval size
both phones are galaxy S3's
I am leaning towards a configuration error
anyone have any ideas i can try?
Hi
I think most probably it could be a problem with the Android device and not to analyze on readahead
size notifications since this occurs only on a particular device
As a part of testing please follow the below things
1) Try to configure active sync profile for different user on that device and try sending email with attachments and see the results.
2) Try to configure profile on a different mobile for that affected user account and see the results.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish
Sathish
Similar Messages
-
Exchange 2010 - Issues with Room Finder not showing available rooms.
Hi,
We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
for troubleshooting:
Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
. We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
If I have missed any information please feel free to ask for more info.
Thanks, all help will be appreciated.Hi,
According to your description, I understand that room finder cannot show available room in Outlook 2010.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Outlook 2010 issue with .pub attachments and read-only
Hello,
Just starting this week per users they can't open a .pub(publisher) document from Outlook 2010, then edit the document click save or click the send to email button without being prompted to save the file to their my doc's or some where. Tested
it out and get the same error. I can click forward, then click on the publisher attachment, then edit and save or click the X to close the document and the attached document includes the changes. Then I can email out. So it works that way
but not the way they did it before.
Also we did install updates last week so could be an recent update that is causing the issue.
Appreciate any idea's or suggestions.
Thanks,
NathanWorkstations are on a domain
Also it may appear to be more of a issue with 2000 .pub type of files. As users can create a 2010 .pub file and it works great fine. But every time a user opens a 2000 .pub file via outlook and tries to edit and save it requests the
user to do a save as, vs. save to outlook temp location. -
I am having some issues with email. My iphone shows 4 emails as unread yet when I look thru all my emails, both on my iPhone5 and my outlook there are no unread emails. How do I clear this up on my phone?
Email does not and has never synced between the iPhone and the computer. It sounds like you may have had your PC set up to use POP3 for e-mail, which will download e-mail from the server and delete it, causing it to vanish from your phone if the phone was set up for IMAP. IMAP provides full synchronization between the server and clients. What you delete on one will vanish from the others. This is the preferred method of managing e-mail as it prevents e-mail from being downloaded, for example, on a PC and making it inaccessible on your phone.
-
Large email attachments crash phone, can't delete email
My son sent me an email with 4 jpg files attached, total size of all attachments is about 25MB. I know this because I was able to download the email and look at photos on my laptop. However, when I got mail on my phone, this email just choked the phone (OS 4.1). Can't download it, can't read it, can't delete it. Seems like the phone just locks up for a while, then the apple screen of death appears, and I can use the phone again. However, trying to delete this email just causes it to crash again, etc...etc...
I have now deleted the email and attachment off the server, so it's gone there. But the phone just refuses to give it up.
Seems like the upgrade to 4.1 was a big mistake. This OS seems to have all sorts of problems with email choking it, if there's any attachment of any significant size. I don't recall 3.X OS having this problem.Apparently you feel I offended you in some way which upon reviewing my response to your post I am at a loss to pinpoint. So my apologies if your feelings were hurt because I didn't intend to do so. I also don't feel that deleting and recreating an email account on the iPhone is a legitimate solution. I get plenty of emails with large attachments (CAD files, renderings and the like). While it might be a work-around to overcome what is clearly a bug in the OS. Deleting and recreating email accounts on the iPhone is obviously therefore not a very convenient or useful solution to this.
Earlier versions of the iPhone OS had similar issues with emails, even with much smaller file attachments. So somewhere along the release cycle, same or similar bug was introduced. Looking through the numerous posts on the discussion board I did not find a similar problem posted. Therefore felt it necessary to relegate this to something in search of a fix, temporary workaround notwithstanding.
It is also clear that OS4.1 has introduced some problems in 3GS performance, as the phone just goes "stupid" from time to time doing the most mundane things.
Take a deep breath and don't be so quick to criticize people, especially when there's plenty of legitimate reasons for getting your hackles up. -
I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.
You need to have a different Apple ID for each of the other devices.
-
Exchange 2010 - Issues after rollup update installation.
Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
GregHi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Hello,
Please advice, i have an Exchange 2010 server with 2 DAG servers - DAG1 and DAG2 - backup with 2 DPM servers, one for DAG1 and one for DAG2 is it possible ?Hi,
I confirmed with Exchange support team that DAGs could be backed up separately.
Meanwhile backup database is important if you need to recover both Exchange server settings and database. See:
Recover a database availability group member server
http://technet.microsoft.com/en-us/library/dd638206.aspx
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Routing issue with ASA and UC540 phone system - at ASA???
Having an issue with routing from the PC at .242 to the CUE server at 10.1.10.1. The CUE server is built into the UC540 phone system. It is an internal piece of software that is used for voicemail and management. The UC540 is not only a call router, it is also an IOS router. It has it's own WAN connection as does the ASA.
Here are some facts:
1. Can ping the UC540's internal CUE server from the PC ( ping to 10.1.10.1 )
2. Can ping the UC540's VLAN 1 address from the PC ( ping to 10.1.10.1 )
3. The ASA is the default gateway for the PC.
4. I have a route inserted at the asa that is:
route 10.1.10.1 255.255.255.0 10.19.250.254 1
5. I have a nat statement that prevents NAT from occuring but I don't think this is necessary as the 10.1.10.0/24 network isn't otherwise defined on the ASA.
6. I cannot pull up a web page when I point the browser on the PC to the 10.1.10.1 address
7. I CAN pull up a web page on the PC when I create a static route on the PC iteslf :
route add 10.1.10.1 mask 255.255.255.0 10.19.250.254
Is is only with this route that I am able to get to the web GUI on the phone system.
8. The phone system has a loopback interface at 10.1.10.2 that serves as the gateway for the internal CUE server, the internal CUE server is at 10.1.10.1
9. The switch is a 2960 and has a trunk port to the phone system to allow for the voice vlan which is at 10.1.1.0/24, no issues with this vlan and phones are connecting to the system fine.
Since I can get the GUI to come up when I set a static route on the PC, then I would assume that the routing in the phone system with it's internal server is fine as it wouldn't work otherwise. Since I can successfully ping the CUE server from the PC, that would lead me to believe that the ASA's routing is setup correctly..... TCP traffic doesn't seem to get to/from the CUE server.
Here are the routing tables:
ASA:
Gateway of last resort is xxx.xxx.xxx.xxx to network 0.0.0.0
C xxx.xxx.xxx.xxx 255.255.255.252 is directly connected, outside
S 172.16.100.100 255.255.255.255 [1/0] via 38.97.193.65, outside
S 10.1.10.0 255.255.255.252 [1/0] via 10.19.250.254, inside
C 10.19.250.0 255.255.254.0 is directly connected, inside
S* 0.0.0.0 0.0.0.0 [1/0] via xx.xx.xx.xx, outside
The UC540 phone system's router side:
Gateway of last resort is xx.xx.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via xx.xx.xx.xx
10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks
C 10.1.1.0/24 is directly connected, BVI100
L 10.1.1.1/32 is directly connected, BVI100
C 10.1.10.0/30 is directly connected, Loopback0
S 10.1.10.1/32 is directly connected, Integrated-Service-Engine0/0
L 10.1.10.2/32 is directly connected, Loopback0
C 10.19.250.0/23 is directly connected, BVI1
L 10.19.250.254/32 is directly connected, BVI1
XX.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C XX.XX.XX.XX/29 is directly connected, FastEthernet0/0
L XX.XX.XX.XX/32 is directly connected, FastEthernet0/0
172.16.0.0/24 is subnetted, 1 subnets
S 172.16.100.0 [1/0] via 10.19.250.1
The UC540's internal CUE server:
Main Routing Table:
DEST GATE MASK IFACE
10.1.10.0 0.0.0.0 255.255.255.252 eth0
0.0.0.0 10.1.10.2 0.0.0.0 eth0
Any help appreciated!!!
Thanks!Hello,
Where you able to solve this problem? It does sound like an issue with TCP state checking on the ASA. The Firewall needs to see both sides of the traffic but the return traffic is going from your UC540 direct to the PC. The firewall essentially kills the traffic.
I would recommend disabling TCP state checking on the ASA and see if it works. Otherwise, you will need to stub route the UC540 as a separate VLAN off the ASA which needs to route through the ASA to reach the PC.
Here is a info page on the TCP State Bypass:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html
Please let me know how it works out. -
i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
Issue with Home Address and Phone of ESS(data not getting saved)
Hi Everyone,
We have a issue with ESS HomeAddress and Phone. when we edit and save data, its showing a message that data is saved. but the data is not getting updated in the backend and the view also is showing old data only. Pleas help us, if anyone came across this type of issue.
Thanks & Regards,
RaviPlease check the fields you are editing are not marked as unused in
V_T588M
V_T588MFPROPS
V_T588MFPROPC
Best wishes
Stuart -
Experimenting with email/attachments
Experimenting with email/attachments - and the problem with an ATT00001.htm attachment also appearing in Outlook/AOL recipients. is there any way to always force attachments added in any app to be placed AFTER the default email signature ie. at end of message ??
Our office is having the same problem. Simply can't attach to the email. When the attachment is attempted it just stalls. Nothing. No change. Just won't do anything. We can forcequit the program but it doesnt solve the problem.
When computer is restarted we are able to attach. Then after a while of routine use of MS Word and Dropbox the problem starts again. Note that we can't even attach stuff from the desktop when this occurs, so I dont think its related to Dropbox.
We werent having this problem until the recent updates. -
i am still getting a issue wtih my email sign in i have click twice on the sign in box . i am using the new bt home page both on w8 and the desktop and it does it on both email accounts my primary acc/ and sub acc. my sub acc email address i use to sign into my microsoft account. i have run bt desktop help pc heath check and it come back with cache size/clear history/ auto detect settings. so i clicked on the box to clear them and still got a issue with email sign in.
I have a large number of apps that show me what happens when accessing web-sites and when accessing BT yahoo I have had up to ---14--yes that's right--14 adverts blocked. Also in every case Yahoo is tracking you. These cause problems with the site. Since blocking them things have got better. I say this because I post on a popular US website which has multiple adverts including pop ups and video ads which badly effected the stability of that web-site-many complaints. Now its toned them down complaints have stopped. Try telling Yahoo to stop its ads and see where it gets you.
-
Having issues with sending attachments via iMail to PC users
Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?
You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account. -
I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.
Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up..........
Maybe you are looking for
-
I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?
-
HT204053 i have two apple id's and wish to merge them onto one but keep my purchase history?
Struggling with this one, I have two apple id's. One old one that I use for store purchases asscociated with old email address, along with a considerable purchase history. I also have an id assciated with a [email protected] email that I use for all
-
Transaction based security vs. Authorization based security
Hi All just a general question does any one know any pro's and con's about implementing transaction based security vs. authorization object based Thanks Mike
-
Error when using GetOracleString of reader
Oracle 10.2.0.1 Windows xp VS Studio 2005 My procedure is running in sqlplus in which i have used rpad function to get fixed column width output something like : select rpad(col1,20,' ') item from table_1 Now, when i says : Dim myReader As System.Dat
-
I created two new blog entries and published them yesterday. Now I want to add pictures and text to those entries. I did so, and keep getting the message "iWeb can not be saved" I keep trying and ultimately it crashes. Rusty