Exchange 2010 - Mail contacts - Set as Reply property

As mail contacts will probably use an external and unknown server to send replies for their mail. I don't understand the purpose of this property for mail contacts ?
Is it only here because one console developer have missed to gray it out or is there a real utility ?
Thank you for that clarification !

Hello,
Based on your description, I understand that you create mail-contact with two e-mail address:[email protected] and
[email protected] (set as external address). You want to understand that if the mail-contact reply to these mail from his private mail system, the sender mail will be
[email protected] and not
[email protected]
If so, I consider when the mail-contact reply to these mail from his private mail system, the sender is
[email protected]
Based on my experience, you can set any SMTP address as external address, but the address must be resolved.
If I have any misunderstanding, please free let me know.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

My macbook air cannot sync with my office microsoft exchange 2010 mail server

My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.

I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see.

SPAM and Exchange 2010 Mail-enabled Public Folders

Is there a way to determine if mail sent to our Exchange 2010 mail-enabled Public Folders by our customers is ever rejected because it was tagged as spam? The concern is that we might not be receiving some email. We rely on the mail-enabled PF's
heavily, but since they aren't a mailbox there is no Junk E-mail folder to check. We do not have the resources to check EOP on a regular basis throughout the day, and the customer would not get an NDR or anything like that.
HDL

Hi,
You can consider to use Message Tracking tool under EMC -> Toolbox to track these messages.
Understanding Message Tracking
https://technet.microsoft.com/en-us/library/bb124375%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
Search Message Tracking Logs
https://technet.microsoft.com/en-us/library/bb124926(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Google added as Exchange Account (mail, contacts, cal), issues with contact #'s resolving to Names.

Google added as exchange account (mail, contacts, calendar), all works except contact correlation. Meaning somebody calls me, it's in the contact list but does not show name just the #. Same for outbound calls..search contacts, tap #, phone shows I'm dialing # versus contact name. This is completely goofy. I had a previous emplorers Exchange account working perfectly before I had to delete it. I removed all email accounts from iPhone and started fresh with adding Google as Exchange 'type' account.

Ok I fixed this problem. Within Google under contacts I had imported 1,200+ contacts and they all showed up there, on my iPad and iPhone. But on the phone name and # would not correlate. I discovered that by editing a contact (within Google contacts page) it would mark it as 'My Contacts' in addition to being Imported on xx/xx/xx. Once I did this, magically my iphone call log would display the name of the contact I edited/reclassified as 'My Contacts'. So I reclassified all the contacts as 'My Contacts' and now have full functionality. End of **** story and hope this helps somebody else.

Microsoft Outlook 2010 & 2013 cannot set automatic reply settings

Hello,
We cannot seem to set automatic reply's within outlook 2010 & 2013. We have an exchange server 2010. We
can setup automatic reply through OWA absolutely fine. The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.
However we can setup out of office on any other office version below 2010 fine. We have run through
a number of tests and have come to the conclusion that the auto discover service is not configured correctly. I have been told to run through the following
"We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
name:
Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
POP,IMAP,SMTP,IIS
Then restart IIS service
to apply the changes.
If the user is connect
to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
to make your autodiscover succeed in last steps of Srv Record lookup method".
So I followed this and opened Exchange Managemnet Shell and ran the following.....
'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
The following output was displayed:
"VERBOSE: Connecting to SERVER2011.EXCHANGE.local
VERBOSE: Connected to SERVER2011.EXCHANGE.local.
[PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
MAP,SMTP,IIS
WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
following receive/send connectors match that FQDN: Default SERVER2011.
WARNING: This certificate will not be used for external TLS connections with an FQDN of
'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
'67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
Windows SBS Internet Receive SERVER2011, Fax/Printer.
Confirm
Overwrite the existing default SMTP certificate?
Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):"
I opened up 'Internet Information
Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
I opened up the Exchange Management
Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
I need to know if it is okay to proceed in replacing the certificate and running this
command.
Thank you

Hi,
We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
Hope this helps.

Exchange 2013 mail contact in Active Directory missing SMTP email address but has a primary email address

Outlook 2010 Distribution Group contact member "Al" is not showing an email address. In Active Directory "Al" is showing an email address but it's not a SMTP email address that is created when you add a new Mail contact using EAC.
When the DG owner sends out an email using DG email account, the mail bounces back as undeliverable.
Exchange Admin Center is not showing the member. The only way to fix the member is by deleting the contact. Re-add contact in EAC then add to Distribution Group. We have over 30 DGs that are missing the SMTP email addresses.
Can a Powershell command fix this issue or is there a sync issue between AD and Exchange?

Hi,
From your description, the contact you specified should be contact not mail contact. Contact and mail contact are two different things. If you create a contact in ADUC, you need to mail-enable it and then set the primary SMTP address for it.
For more information, here is an article for your reference.
Recipients
http://technet.microsoft.com/en-us/library/bb201680(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 webmail - contact search returns an error when single letter is used

Exchange 2010 SP2 environment. In Webmail when a user creates a new message, pressing on the To: button to add recipients, if they search the GAL, a single letter search (A for example) returns all names starting with A.
If they try to perform the same search for their contacts they get: No results found in IE or the error below in Firefox and Chrome. If I search contacts with two letters "Ab" for example then no error occurs and I get results. So search doesn't work
the same way for contacs vs GAL. Is this normal for webmail 2010?
An unexpected error occurred and your request couldn't be handled.
Request
Url: https://webmail.contoso.com:443/owa/ev.owa?oeh=1&ns=CP&ev=LoadFresh&pfmk=M35:1407960692770;M2:1407960692796;M23:1407960694745
User host address: 10.1.3.9
User: User Name
EX Address: /o=xxxxxxx/ou=First Administrative Group/cn=Recipients/cn=username
SMTP Address: [email protected]
OWA version: 14.2.247.5
Mailbox server: MBX1.contoso.com
Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Premium.Controls.VirtualListView2.GetDidLastSearchFail()
Microsoft.Exchange.Clients.Owa.Premium.Controls.VirtualListView2.LoadData(Int32 startRange, Int32 rowCount)
Microsoft.Exchange.Clients.Owa.Premium.Controls.AddressBookVirtualListView.LoadData(Int32 startRange, Int32 rowCount)
Microsoft.Exchange.Clients.Owa.Premium.VirtualListViewEventHandler2.InternalLoadFresh(Boolean renderHeaders)
Microsoft.Exchange.Clients.Owa.Premium.ContactVirtualListViewEventHandler.LoadFresh()

I doesn't happen on mine, but I'm now on SP3. It might help if you upgrade - even if you don't want to go to SP3 yet, your OWA version appears not to be at rollup 2 level. I only mention this because if it is a problem specific to version 14.2.247.5 (which
could easily be the case, because MS change the OWA scripts with surprising frequency) , it's going to be hard finding people who can reproduce the problem.
But to answer the question in the last sentence, searching the GAL and searching Contacts is, in a technical sense, very different. The GAL search is done with an LDAP query against Active Directory, whereas Contacts are usually going to be mailbox items,
plus a few AD contact items.
OWA For SmartPhone

Need help with Exchange 2010 Spam filter setting

Hello,
In Exchange 2010 there is built-in anti spam setting as well as Forefront Protection 2010 for Exchange Server. But this doesn't give privileges to the end user who could access it using any web URL where they could set whitelist/blacklist etc.
Is there any product in Forefront which we can use for such purpose ?
Also in Forefront Protection 2010 for Exchange Server if Content Filtering is enable then it reject all emails which have html tag, even if sender have html base signature. This is really confusing any solution for this problem too ?
thanks

Hello,
In my case, I have mostly seen FPE reject messages as spam when there is alink to say "click here to access <bank web site> and the underlying link is actually to an IP address or to another site that does not match what the link claims to be.
We have also seen FPE reject messages with an image that is a clickable link.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Exchange 2010 mail routing

How did you migrate to Exchange 2010? Did you not migrate the groups or did you set everything up from scratch?

Hi,
We have a new exchange server installed in our domain and we are moving all our mail transmitted through epicor to this server, and I am experiencing this error
There is problem sending customer order confirmations by email. The
message says the mailbox is unavailable. The server response was 5.7.1. Unable
to relay
Now I know there is nothing wrong within Epicor, What is wrong with the Exchange server?
Is it something to do with the receive connectors in the HUB transport I have got set up?
All other mail flow is working correctly
Regards,
Ian
This topic first appeared in the Spiceworks Community

Exchange 2010 Mail Security TLS with HSBC

Dear all,
I have setup an all-in-one exchange server without edge server role. However, it is needed to have TLS mail communication setup with HSBC. May I know what exactly configuration do I need? Do I need to implement an edge server with public cert?
Can I enable TLS without edge server and with self-signed cert?
Thanks a lot
Best Regards,
Elroy

Hi,
it's not possibile to connect on TLS with HSBC without a public CA certificate. Not selfsigned is permitted.
No edge server it's mandatory.
Import certificate on Exchange computer store and set it to use with SMTP service:
Enable-ExchangeCertificate
-Thumbprint CERTTHUMBPRINT -Services SMTP
You need to create a custom send connector, complete domain scope with all HSBC domain and set bridgehead Exchange server. After the send connector creation set the Enforce TLS:
Set-SendConnector CONNECTORNAME -RequireTLS $true
Be careful to default internet receive connector that accept TLS connection.
This is a good site for testing: https://www.checktls.com/
Bye bye.
Raffa!

Exchange 2010 mail storing Architecture

hi I just need to know what is the method that exchange server 2010 use to store the mail,
if I elaborate more when one user sends a mail to few people in the same organization does that mail copies to every users mail box or exchange just uses the referencing method to one single mail.
please help one of my clients using DAG in exchange 2010 and their mail box sizes increasing rapidly. I need to provide a solution to them. please let me know if you want more details
please help me with some links that reveals about these in detail.
thanks In Advance.

Every mailbox will get a copy of the message. Single Instance Storage (SIS) is history.
Dude, Where's My Single Instance?
http://blogs.technet.com/b/exchange/archive/2010/02/22/3409361.aspx
Martina Miskovic

Exchange 2010 Mail Submission Service Logging

Hi,
Is there a way to log all submitted messages from outlook clients (online mode) so I can see what is happening to messages that are getting stuck in the Outbox from the server's perspective?
Thank you.

If you look at the logging section in this post
http://blogs.technet.com/b/rmilne/archive/2013/11/20/exchange-2010-tweaks.aspx
add key="LoggingTag" value="ConnectDisconnect, Logon, Failures, ApplicationData, Warnings, Throttling" />.
You can also add ROP logging, which are the individual Outlook commands sent, by adding the tag to the above line.
This gets *VERY* busy. *VERY* quickly, so maybe try this out on a test box first to see what that gives you.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange - Gmail : how to set a REPLY-TO/FROM email address?

I have Gmail setup as a Microsoft Exchange Account, so that it syncs my mail, calendar, and contacts (works great)
BUT - the problem is I never use my @gmail.com address to send mail, in Gmail I have several other addresses set up that I send mail "from". I don't like to get tied down to an ISP or service provider domain in case I want to change one day, so I own my own domain names and use my domain for email.
In my desktop email clients (ie - Thunderbird) I can set the "FROM" address to one of these other addresses, but there is no such option on the iPad.
Is there any way to configure this?
Is this functionality going to be enabled in a future version?
Thank you

No, there is no Reply to: field in iPad Mail. There are some workarounds, though.
First, some have reported doing what you said couldn't be done, i.e., setting some other account as the default. I've never tried that but it shouldn't be difficult to find their descriptions here in the forums.
I only do it on a case-by-case basis, using Mail's way of selecting which email address and outgoing server to use as you start composing the message. That doesn't seem to quite meet your requirements, though.
As for the future, if you'd like your ideas and suggestions to influence it then submit them via the iPad Feedback Form — http://www.apple.com/feedback/ipad.html

Exchange 2010 - Mail redirect

Hello,
i want to set up my Exchange Server 2010 to pass ALL e-mails he recives on 192.168.137.102:25, to the "Filter" which is listening on IP address 192.168.137.103:25, then after it filters the email (for example delete some vulgarisms) it will
send them to my Exchange listening on 192.168.137.102:10025 and then the email will be send to users mailbox.
I've already Set up:
- send connector: Address space: SMTP *, Smarthost: filter.<my_domain>, Source server: <my exchange>
- recive connector: listening All Available IPv4 on 10025, Recive mail from: 192.168.137.103 (my filter IP).
However it don't work propperly. My Filter don't see any traffic, so no data is passed to it from the Exchange. Could you please tell me what else i should configure to have this thing works as i want it to?
Thanks,
Michael

Here you go:
http://blogs.technet.com/b/exchange/archive/2013/01/21/how-to-write-an-exchange-2013-transport-agent.aspx
https://msdn.microsoft.com/en-us/library/office/dd877033%28v=exchg.140%29.aspx
http://www.c7solutions.com/2012/10/creating-simple-exchange-server-html
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Exchange 2013 OWA: Cannot set auto reply in shared mailbox

We use Exchange 2013 and Outlook 2010. We have 3 users tha connect to a shared mailbox. We would like to have an auto-reply on this mailbox but cannot set it with the OWA. We get the following error:
Client Information
User Agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.3; WOW64; Trident/7.0; .NET4.0E; .NET4.0C; InfoPath.3)
CPU Class: x86
Platform: Win32
System Language: nl-NL
User Language: nl-NL
CookieEnabled: true
Exception Details
Date: Fri Jul 11 11:31:40 UTC+0200 2014
Message: Kan de eigenschap _events van een niet-gedefinieerde verwijzing of een verwijzing naar een lege waarde niet ophalen
Url:
https://owa.'domainname'.nl/ecp/15.0.712.22/scripts/microsoftajax.js
Line: 5
Call Stack
Dump Event
errorMessage = Kan de eigenschap _events van een niet-gedefinieerde verwijzing of een verwijzing naar een lege waarde niet ophalen
errorUrl =
https://owa.'domainname'.nl/ecp/15.0.712.22/scripts/microsoftajax.js
errorLine = 5
errorCharacter = 57312
errorCode = 0
actionURL =
altKey = false
altLeft = false
behaviorCookie = 0
behaviorPart = 0
bookmarks = null
boundElements = [object HTMLCollection]
button = 0
buttonID = 0
cancelBubble = false
clientX = 1187
clientY = 72
contentOverflow = false
ctrlKey = false
ctrlLeft = false
data =
dataFld =
dataTransfer = null
fromElement = null
keyCode = 0
nextPage =
offsetX = 0
offsetY = 0
origin =
propertyName =
qualifier =
reason = 0
recordset = null
repeat = false
returnValue = true
screenX = 2373
screenY = 343
shiftKey = false
shiftLeft = false
source = null
srcElement = null
srcFilter = null
srcUrn =
toElement = null
type = error
url =
wheelDelta = 0
x = 0
y = 0
getAttribute =
function getAttribute() {
    [native code]
removeAttribute =
function removeAttribute() {
    [native code]
setAttribute =
function setAttribute() {
    [native code]
Detailed Call Stack

Hi,
Error information is quite important. In order to solve your issue effectively, please take your time to describe the error in English for my research.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2010 - Mail contacts - Set as Reply property

Similar Messages

Maybe you are looking for