Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Hi,
i have problem with Outlook Uses who have Full Access on other mailbox.
An authentication window pop up very time a user start Outlook.
If i remove the access everything is ok.
if i insert manual the mailbox everything is ok
The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
Before the update, was no issue.
i will appreciated any help
Thanks

Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Similar Messages

Receive Connector stopped working after Update Rollout 2 for Exchange 2007 SP2

One of the Exchange 2007 servers receive connector has stopped working since installing the latest rollout update for Exchange 2007 SP2 - for some reason the following error is received (when troubleshooting on the adjacent server) :
"Remote server server.domain.co.uk failed the mail acceptance test. MAIL FROM command: Respond = 530 5.7.1 Client was not authenticated."
Most admins will know you usually get this when first setting up Exchange and the receive connector not allowing anonymous connections. But our setup has been working for well over a year with no problems. Even enabling anonymous connections still doesn't fix the problem.
Our setup is 2 exchange servers across 2 sites, with the problematic server never receiving email from the internet, only from the other Exchange server (which is internet facing). The above error is received when the internet facing server is relaying email over to the problematic server. Though in the message queue the following error is received:
"SMTPSEND.DNS.NonExistantDomain; nonecistant domain"
After testing DNS that all seems fine, so I don't believe it's a DNS problem.
Any ideas why this would happen?
Thanks,
Matt

Hi Matt....
To receive e-mails from the external servers or domains or clients, you can setup a new receive connector on Hub Transport Server. To do this task, you can go through the steps mentioned in this blog....
https://mailsolutions.wordpress.com/2015/02/06/resolving-error-530-5-7-1-client-was-not-authenticated-with-receiver-connector/
Hope this will work
Thanks

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Rollup 8 for Exchange 2010 SP2 causes EWS error with bad parameter for Exchange.MailboxReplicationService.ProxyService

When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?

Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

My ipad2 after updated to ios5, unable to serve internet,apps store,even facebook,help!

My ipad2 after updated to ios5, unable to serve internet,apps store,even facebook,help!

Try reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, Andrea

Hi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support

Has mssql2008r2 got "Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"

hi,
I have
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 <X86> (Build 2600: Service Pack 3)
, i wanted to know has it got
"Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"
so that i do not have to install or i have to install
yours sincerley

Thank u, please tel me can i instal sp3.
I have noticed the link of sp2 (http://www.microsoft.com/en-in/download/details.aspx?id=30437)
has listed
(SQL Server 2008 R2 Express Edition)
SQL Server 2008 R2 Service Pack 2 (SP2) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 2. SQL Server 2008 R2 Service Pack 2 contains Cumulative Update
1 to 5 from SQL Server 2008 R2 SP1. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
SQL Server 2008 R2 Express Edition
where as link of sp3(http://www.microsoft.com/en-us/download/details.aspx?id=44271)
has not listed express edition but written in general.
SQL Server 2008 R2 Service Pack 3 (SP3) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 3. SQL Server 2008 R2 Service Pack 3 contains
Cumulative Update 1 to 13 from SQL Server 2008 R2 SP2. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
yours sincerley

Security Update for SQL Server 2005 SP3 (KB2494113) failed

Here is the Error, Can't get the update install, please help.
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
SQL Server Tools and Workstation Components 2005 ENU SP2 9.2.3042 x86 EXPRESS
Products Disqualified & Reason
Product Reason
SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Product : SQL Server Tools and Workstation Components 2005
Product Version (Previous): 3042
Product Version (Final) :
Status : NA
Log File :
SQL Express Features :
Error Description : The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528

Hi Bhanu,
I have uninstall the SQL Server Tools and Workstation Components 2005.
But still unable to upg the SQL Server with the KB249411. Any more ideas?
This is the Summary log.
Time: 09/10/2014 11:09:48.218
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
Products Disqualified & Reason
Product Reason
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528
Here is what is log in the SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B8:F0) [11:09:39:826]: Product: Microsoft SQL Server 2005 Express Edition - Update 'GDR 4060 for SQL Server Database Services 2005 ENU (KB2494113)' could not be installed. Error code 1603. Additional information is available in the log file C:\Program
Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log.
MSI (s) (B8:F0) [11:09:39:827]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: GDR 4060 for SQL Server Database
Services 2005 ENU (KB2494113). Installation success or error status: 1603.
MSI (s) (B8:F0) [11:09:39:828]: Note: 1: 1729
MSI (s) (B8:F0) [11:09:39:828]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B8:F0) [11:09:39:829]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (s) (B8:F0) [11:09:39:829]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:39:829]: Unable to delete the file. LastError = 32
MSI (s) (B8:F0) [11:09:40:092]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:F0) [11:09:40:092]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:40:094]: MainEngineThread is returning 1603
MSI (s) (B8:6C) [11:09:40:097]: RESTART MANAGER: Session closed.
MSI (s) (B8:6C) [11:09:40:097]: No System Restore sequence number for this installation.
=== Logging stopped: 9/10/2014 11:09:39 ===
MSI (s) (B8:6C) [11:09:40:098]: User policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:6C) [11:09:40:099]: Restoring environment variables
MSI (s) (B8:6C) [11:09:40:099]: Destroying RemoteAPI object.
MSI (s) (B8:30) [11:09:40:099]: Custom Action Manager thread ending.
MSI (c) (FC:60) [11:09:40:100]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:60) [11:09:40:101]: MainEngineThread is returning 1603
Thanks,
Alice

Any good training videos for project server 2010

Hi All,
I am working on SharePoint for several years and we had installed project server & created PWA site. But project server looks lot different from SharePoint. is there any good training video's for project server 2010?
Thanks for any help
Rithu

Rithu,
This would be a good place to start: http://technet.microsoft.com/en-us/library/ff628958(v=office.14).aspx
There are also several videos on Youtube as well. I am not sure if there is a 'structured' course available for Project Server 2010
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Need download Link for LYNC SERVER 2010

I Couldn't find the download link for Lync Server 2010.
It redirects to Lync Server 2013 download page.
Could anyone please reply me with Lync Server 2010 download link?
Regards,
Arun

The Lync Server 2010 Trial VHD is located at:
VHD test drive: Lync Server 2010
(Eval) - Part 1 of 2
VHD test drive: Lync Server 2010
(Eval) - Part 2 of 2
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Similar Messages

Maybe you are looking for