Exchange 2010 Management Pack Data Warehouse Synchronization Fails

Hi Everyone!
Has anyone had success with importing the Exchange 2010 management pack into Service Manager 2012?
When we try to import it, it fails.
Upon further investigation, the 'System Center Core Monitoring' management pack (which is not included with Service Manager 2012) is a dependency of the Exchange 2010 management pack but
after we import it from the OpsMgr 2012 media, we still get the following warning when we import the Exchange 2010 management into Service Manager 2012...
"The management pack was imported successfully.
Warnings (1):
Override verification failed, cannot find Management Pack Element : : Cannot find ManagementPackElement [Type=ManagementPackRule, ID=Microsoft.SystemCenter.Agent.MonitoringHost.PrivateBytesThreshold] in management pack ManagementPack:[Name=Microsoft.SystemCenter.2007,
KeyToken=31bf3856ad364e35, Version=6.0.6246.0]."
...and, the Exchange 2010 management pack status in the Service Manager 2012 Data Warehouse 'Management Pack' view indicates 'failed' after the MPSyncJob completes.
We have a few 'Business Services' which depend on the Exchange 2010 management pack that we are trying to synchronize from OpsMgr 2012 and we are stuck until we can get the Exchange 2010 management
successfully imported into Service Manager 2012 and have it show a status of 'Completed' the Service Manager 2012 Data Warehouse 'Management Pack' view.
Nothing useful in the
Service Manager 2012 Data Warehouse and Management servers events logs that we could see.
Any help or guidance would be GREATLY appreciated!
Regards,
JJ

Update: I Just tested with CU2 installed for SrvMgr 2012 and OpsMgr 2012 and version 14.3.38.2 of the Exchange 2010 management, but the management pack still fails to deploy to the SrvMgr 2012 data warehouse (the management pack status shows
up as 'failed' and the MPSyncJob shows the management pack as 'pending association'). The only clue I have for this problem is the folllowing warning which occurs when I import the management pack into SrvMgr 2012...
I also get the following 33519 Event ID warning in the Operations Manager event log on the data warehouse server...
~~~~~
Management pack association ignored. This does not require any action. If you continue to frequently see this warning, contact your administrator. This process will continue to retry.
Management pack ID: e2296ed5-ddbc-ebc7-3881-c5288adaa7cf
Management pack name: Microsoft.Exchange.2010
Management pack version: 14.3.38.2
Data source name: SRV
Message: Either the MP has failed deployment Or any of its references has failed deployment
~~~~~
Has anyone had success with getting the Exchange 2010 management pack imported and successfully deployed to the SrvMgr 2012 data warehouse?
The good news is that even though the Exchange 2010 management pack has a status of failed, the distributed applications in OpsMgr 2012 that depend on the Exchange management pack now show up under Configuration Items/Business Services including
all related service component objects which was what I was trying to accomplish in the first place, so for now I'll just leave the Exchange 2010 management pack in the data warehouse with a failed status.
Regards,
JJ

Similar Messages

Exchange 2010 - Management Console and Shell Very slow

Heya
I have an Exchange 2010 SP3 enviroment, with 2 HUBCAs and 5 MBX servers.
This servers were 2008 R2 standard, and they were working fine.
This weekend, in order to configure DAG, i upgrade 3 of them to server 2008 R2 enterprise with dsim. Is not the first tiem i do this, and never had problems before.
After the upgrade, the server started fine, the mailboxes, the database.. everything fine.. except, de mmc and the shell.
Both, the mmc and the shell wont start. It gives me the winrm error, but because a time out.
I have installed the installed the iss-winrm feature, delete on regedit and %appdata% the "cache" for the management console, checked the firewal... and nothing worked.
Well, thats not true, in one of the servers, the Management console started working fine, but the shell, it connect, but every command i launch it takes like 10-15 minutes to execute (for example, a get-mailboxdatabase).
In the other,, no the Management console, no the shell connects, i get a winrm timeout.
I dont know were to continue cchecking why happens this, just started after changing the 2008 R2 from standard to enterprise
Thanks for the help!!

Hi,
Please check that your time is in sync as well on your Exchange Server.
Please check whether this issue caused by performance.
More details in the following article:
Understanding Memory Configurations and Exchange Performance
http://technet.microsoft.com/en-us/library/dd346700(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/dd346699(v=exchg.141).aspx
Please also paste the detailed error message without sensitive information for the further troubleshooting.
Found some related blog for your reference:
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

Error when trying to install MS Exchange 2010 Management Tools Windows 7 x64 SP1

When I try to install Exchange 2010 Management Tools on my Windows 7 Pro x64. I get the message ExSetupUI.exe has stopped working? Has anybody else gotten this message? It doesn't even load into the install screen. It is stopping before then.

Hi
Have you installed the admin tools for windows 7 and all the prerequisites? Try running the setup from an elevated prompt or "as Administrator"
for ref:
http://social.technet.microsoft.com/Forums/en-US/63880f4e-6b6e-4ea9-b3b6-8a535657288f/installing-exchange-management-tools-on-a-win-7-x64-box-getting-error-on-readiness-checks?forum=exchange2010

Forcefully delete user's "Deleted Items" from Exchange 2010 Management shell ?

After migration from Exchange 2003 to 2010 my organization's some user can't delete items from their deleted items folder, it generate a error message so how can I forcefully delete user's deleted items from their "Deleted Items folder" from
Exchange 2010 Management shell ? Thanks
Babu

Hi Babu ,
Based on my knowledge i have given some suggestions please have a look in to it.
1.We cannot use the search-mailbox command specifically for any folder in the mailbox.But we can use it for a whole mailbox.Below is the command which will copy the entire contents of the mailbox to the target folder called as "backup" .
Search-Mailbox -Identity "problematic mailbox name" -TargetMailbox "test mailbox" -TargetFolder "backup" -LogLevel Full -deletecontent
Note : Before executing the above command , please execute the below.
New-ManagementRoleAssignment -Name "Import Export_Enterprise Support" -SecurityGroup "Enterprise Support" -Role "Mailbox Import Export"
Once the above command is executed then you need to add your admin account to the security group "Enterprise Support" and then use the Search-Mailbox command to copy the entire items to the target mailbox and also it will delete all the copied
items from the original mailbox.
2.Another one option is to use the MFCMAPI tool to force delete the items on the deleted items folder.
Most importantly before doing all the above , please share me the error message what your users are facing while deleting the items from deleted items folder.
Thanks & Regards S.Nithyanandham

Data Warehouse Synchronization server - too many entries

I am having problems with app advisor not getting performace data. I believe that it is due to the Data Warehouse Synchronization
server having too many entries as I only have 1. How do I remove a server?

Seems you need to restore the OperationsManager Database from the previous backup, try the methods in the kb.
http://support.microsoft.com/kb/2771934/en-gb
http://social.technet.microsoft.com/Forums/en-US/0f80e33e-243a-44ab-ba1a-e73ec421de03/two-dw-synchronization-server-instances-by-mistake
Juke Chou
TechNet Community Support

Exchange 2010 management tools and others

Win2k8 domain, Exchange 2010 servers
We want to move to Win8.1 but we, the admins, are preventing it because our tools like the Exchange 2010 Management tool doesn't work with Win8.0 so we're stuck with Win7.
I've googled around and most suggestion never worked.
Does Microsoft have any plans at all to have Exchange 2010 management tools and other tools we use to manage our domain work with Win8.1?

Hi Rino,
Thanks for your sharing and efforts put on this issue.
This will benefit others who encounter the similar scenario as yours.
Happy holiday~
Kate Li
TechNet Community Support

Exchange 2010 Management Console Initialization failed

Hi.
I have a server running 2008R2 as a domain controller with Exchange 2010 aswell.
This is a fairly new migration from a sbs2003 server, which went very well, in regards to exchange and AD.
The management console has worked since the migration, but suddenly today it stopped working, with the following message (the message is actually from the management shell, which isn't working either.):
[dc.domain.local] Connecting to remote server failed with the following error message : The WS-Management service cannot
process the request. The system load quota of 1000 requests per 2 seconds has been exceeded. Send future requests at
a slower rate or raise the system quota. The next request from this user will not be approved for at least 975630592 milliseconds.
For more information, see the about_Remote_Troubleshooting Help topic.
IIS is working, and listening on ports 80 and 443.
All services are running. I have tride to restart IIS, Windows Remote Management, informationstore and system attendant, but still no luck.
I hope you can help me figure this out.
Anders

I got it. I had to open IIS7 and create the Default Web Site, as I'd deleted it sometime ago.
Once I did that, everything worked great! Frustrating the things we do that come back and kick us in the face for hours, months later....

Questions about upgrading from Exchange 2010 RTM to Exchange 2010 Service Pack 3

I am preparing to perform an maintenance upgrade on our current Exchange 2010 Server, to Service Pack 3 (and any post-SP3 roll ups), but I have a couple questions about the process.
Current Exchange Server details:
Exchange 2010 Standard
Version: 14.0 (Build 639.21) - from Exchange Management Console
Version: 14.0.702.4000 - from Outook client
Active Directory forest and domain levels: Windows 2008 R2 native
The questions I have are:
1. Can I assume that because it's version 10.0.702.4000 I am on Exchange Server 2010 RTM Update Rollup 4?
2. Can Exchange 2010 Standard RTM be patched directly to Service Pack 3, or would I need to perform incremental patches (i.e. SP1, SP2, etc.) before going to SP3?
3. Do I need to manually perform the AD domain schema prep before applying Service Pack 3, or will the Service Pack 3 update process automatically handle the modifications of the AD schema?

Hi,
Here are my answers you can refer to:
1. Firstly, I’d like to explain , we can use connection status to check our Exchange server version from Outlook client:
http://office.microsoft.com/en-in/outlook-help/determine-the-version-of-microsoft-exchange-server-my-account-connects-to-HA010117038.aspx
And I check my version from both EMC and Outlook client. It’s same.
2. We can directly update RTM version to SP3 , and the update will take an additional 30 minutes or longer per database.
3. Since Exchange 2010 SP3 makes updates to the Active Directory schema, we need prepare AD domain schema. However, it will automatically prepare AD and the domain when you install the update.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/jj965774(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support

Data Warehouse Jobs Failing

As you can see in the screen shot, everything is failing. I have tried un-registering and regerstering the data warehouse but I get the same results. There arent any relevent events on the SCSM server, but the data warehouse has the following:
Event 33537:
Deployment related exception has been caught during ETL. This is either due to a failure in Deployment or we have exceeded the number of retry attempts. Work item will be marked as failed.
Additional information:
ETLModule: etlMod=NULL
RetryAttempts: 0
WorkItem: WorkItemId = 35013940, processModuleId = 11694, isDirty = True, BatchId = 115291, status = Failed, RetryCount = 0, ErrorCount = 1925, TakenTime = 12/20/2013 19:30:45, Module
= ModuleName = LoadDWDataMartReleaseType, ModuleType = System, ModuleDescription = Deployment Execution Step, ProcessCategoryName = Load, ProcessName = Load.Common, DeletedBatchId=0
Exception details:
Exception type: Microsoft.EnterpriseManagement.Common.ObjectNotFoundException
Exception message: An object of class ManagementPackWarehouseModuleType with ID 28be8a8c-772c-4d5a-94df-2e30784497d7 was not found.
Stack trace:
   at Microsoft.EnterpriseManagement.DataWarehouseManagement.GetWarehouseModuleType(Guid id)
   at Microsoft.SystemCenter.Warehouse.Utility.Store.GetWarehouseModule(Guid id)
   at Microsoft.SystemCenter.Etl.ETLModule.GetModule(WorkItem etlWI)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback
completionCallback, Object completionState)
Events 33333:
Data Access Layer rejected retry on SqlError:
Request: CreateSolutionPackImportMessage -- (TransactionId=e5fad4da-21d2-41d9-b818-97c6efb299bb), (Message=PABEAGUAcABsAG8AeQBtAGUAbgB0AE0AZQBzAHMAYQBnAGUAIAB4AG0AbABuAHMAPQAnAGgAdAB0AHAAOgAvAC8AcwBjAGgAZQBtAGEAcwAuAG0AaQBjAHIAbwBzAG8A...),
(RETURN_VALUE=-1)
Class: 0
Number: 3621
Message: The statement has been terminated.
And…
Data Access Layer rejected retry on SqlError:
Request: CreateSolutionPackImportMessage -- (TransactionId=e5fad4da-21d2-41d9-b818-97c6efb299bb), (Message=PABEAGUAcABsAG8AeQBtAGUAbgB0AE0AZQBzAHMAYQBnAGUAIAB4AG0AbABuAHMAPQAnAGgAdAB0AHAAOgAvAC8AcwBjAGgAZQBtAGEAcwAuAG0AaQBjAHIAbwBzAG8A...),
(RETURN_VALUE=-1)
Class: 16
Number: 266
Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
And a lot of these...
Message: Failed to create BaseModule InstanceWrapper
Module name: TransformChangeImpact
Process: Transform
Entity type: Outrigger
Entity name: ChangeImpact
Entity GUID: dcb7f8f8-a4e4-876e-9cd8-dd98f7aab4d1
Field warehouse source ID value: 1
Module GUID: 82e2491e-d690-c73c-b794-807346fa8a7e
Message: Failed to create BaseModule InstanceWrapper
Module name: LoadOMDWDataMartIncidentResolutionCategory
Process: Load
Entity type: Outrigger
Entity name: IncidentResolutionCategory
Entity GUID: b668ce94-7450-6adc-2ad0-b9104c82b86b
Field warehouse source ID value: 1
Module GUID: 5d0ed3d3-068b-9315-d637-79d4ce8a5fe1
At first (after some google-ing) I figured it was due o bad DB grooming. I tried following these instructions:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5919b0d7-4510-4d96-a043-89092655cc06/error-in-transformcommon-etl-job?forum=dwreportingdashboards
and I did this...
http://support.microsoft.com/kb/2853442
But it still fails.
Any suggestions?
We're running 2012 sp1 on SQL 2008R2.
- Get on the floor, do that dinosaur

Do you have MPs that have failed deployments? If yes, right click on them and click on "Restart Deployment". You kind of have to figure out the sequence if there are dependencies. If the deployment fails, post the error message from the event log
(Operations Manager log source)
If you recently upgraded to 2012 R2, you may want to execute the script from the release notes (http://technet.microsoft.com/en-us/library/dn299381.aspx)

Exchange 2010 Management Role loading slowness

Hello,
I'm new to the company I currently work for and relatively new into IT, and one of the first issues I have noticed here is how incredibly slow Exchange 2010 is when loading.
I'm aware there are numerous topics covering this issue after having done many checks on search engines, however most of them seem to advise going to IE and un-checking the boxes defining Certificate Revocation or other solutions that I haven't found to
be applicable, at least not to my knowledge. I have tried the first suggestion but found this made no difference.
We don't get any error messages when loading but it is generally a little slow, however the issue is where it says "Getting management role information for: domain/user info etc...", at the end of the progress bar. It will sit there for
6 minutes before finally loading and allowing me in. This happens every time you use it also, not just the first time, whether it's on the local machine of anyone in IT or on the server.
I've checked the server's available resources and it seems to be more than enough, although it is a virtual server so I'm not sure whether that changes what the issue could be.
Would anyone be able to help point me in the right direction of what I could be checking for? Sorry if this is a really vague question or I've not provided enough detailed information, but any help would be really appreciated. I'm sure one of the more experienced
members of my new team could take a look but I figured I'd try and make a good impression!
Apologies if this is in the wrong forum section also.
Thanks very much

Hi
Thanks for the reply.
We're on Exchange Server 2010 SP3 (14.03.0158.001), as far as I can tell it's all up to date.
Server specs:
OS - Server 2008 R2 Enterprise, 64bit
RAM - 32GB
Processor - Intel Xeon E5-2690 @ 2.90GZ, 16 Cores, 16 Logical Processors
There's 433 mailboxes in total, spread over 19 databases (a database for each department), 17 of those being mounted and active.
Once I'm into the management console and can use the various features, the performance is generally fine, it's just that initial loading where it hangs.
Thanks

Migrating mailboxes Exchange 2010 to 365, e-mail delivery failed

We are currently in a hybrid configuration with 2010 and 365. I have migrated one mail box to test, but now when I try to e-mail from that box to internal and external users I get this undeliverable message:
Generating server: BY2PR05MB630.namprd05.prod.outlook.com
[email protected]
Remote Server returned '< #5.7.0 smtp;550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain'>'
[email protected]
Remote Server returned '< #5.7.0 smtp;550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain'>'
Original message headers:
Received: from BY2PR05MB631.namprd05.prod.outlook.com (10.141.218.20) by
BY2PR05MB630.namprd05.prod.outlook.com (10.141.218.13) with Microsoft SMTP
Server (TLS) id 15.0.921.12; Tue, 22 Apr 2014 17:46:14 +0000
Received: from BY2PR05MB631.namprd05.prod.outlook.com ([127.0.0.1]) by
BY2PR05MB631.namprd05.prod.outlook.com ([10.141.218.20]) with Microsoft SMTP
Server id 15.00.0921.000; Tue, 22 Apr 2014 17:46:13 +0000
Content-Type: multipart/mixed;
boundary="_000_10047ccea0ec4ac6b152ab717cee271fBY2PR05MB631namprd05pro_"
From: User <[email protected]
>
To: user <[email protected]>
Subject: FW: SRX614042290246126ID -
Thread-Topic: SRX614042290246126ID -
Thread-Index: Ac9eUriGOe4zLpjESEeTsp1IfSBH8AAAAict
Date: Tue, 22 Apr 2014 17:46:13 +0000
Message-ID: <[email protected]ok.com>
References: <[email protected]>
In-Reply-To: <[email protected]>
X-MS-Has-Attach:
X-MS-Exchange-Inbox-Rules-Loop: [email protected]
X-MS-TNEF-Correlator: <[email protected]ok.com>
x-ms-exchange-parent-message-id: <[email protected]>
auto-submitted: auto-generated
x-ms-exchange-generated-message-source: Mailbox Rules Agent
x-forefront-antispam-report: SFV:SKI;SFS:;DIR:INB;SFP:;SCL:-1;SRVR:BY2PR05MB630;H:BY2PR05MB631.namprd05.prod.outlook.com;FPR:;LANG:en;
MIME-Version: 1.0
X-Auto-Response-Suppress: DR, OOF, AutoReply
X-OriginatorOrg: achievesd.org
X-OrganizationHeadersPreserved: BY2PR05MB630.namprd05.prod.outlook.com

Also, since you have tried that for your test environment, how you are proceeding the hybrid migration ?
You can get better help by using
exchange server deployment assistant for hybrid deployment migration which auto configure the all setup according to our exchange environment.
Moreover, here is another appreciable
resource which can be a good approach to proceed migration from exchange 2010 to office 365.

Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
using LANDesk to deploy it. All methods are failing.
I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
Microsoft Updates before this one.
When I try Microsoft Update, I receive the following error:
Code B56 Windows Update encountered an unknown error.
Below is the WindowsUpdate.log excerpt:
2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler :: START :: Handler: MSI Install
2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
2013-08-06 12:46:42:265 112 600 Report Uploading 2 events using cached cookie, reporting URL =
http://wsus:8530/ReportingWebService/ReportingWebService.asmx
2013-08-06 12:46:42:358 112 600 Report Reporter successfully uploaded 2 events.
2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
2013-08-06 12:47:52:012 112 938 AU >>## RESUMED ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
2013-08-06 12:47:52:012 112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
2013-08-06 12:47:52:012 3952 dc4 Handler :: END :: Handler: MSI Install
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
2013-08-06 12:47:52:168 112 5c4 Agent *********
2013-08-06 12:47:52:168 112 5c4 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-08-06 12:47:52:168 112 5c4 Agent *************
2013-08-06 12:47:52:168 112 938 AU Install call completed.
2013-08-06 12:47:52:168 112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-08-06 12:47:52:168 112 938 AU #########
2013-08-06 12:47:52:168 112 938 AU ## END ## AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
2013-08-06 12:47:52:168 112 938 AU #############

I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system. Researching the errors I got led me to discover the following:
1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update. Some were able to get it installed by first doing a Repair on Office 210 itself
first, and then installing SP2. But many others have not been able to install it at all.
2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory. This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
during the installation. Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
I am one of those people.
I found a posting that described a way to recreate MSOCACHE from the source CD. I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file. I found the file on the CD and
pointed the installer to it, but it said the file was not found and quit. So my install still failed.
The last response I got at the Microsoft Answers site was to wait until SP2 is debugged. It's not clear to me this will ever happen, but we'll see.
Birk Binnard http://www.birkbinnard.com

Exchange 2010 Service Pack 3 question

Forum,
We currently have a small Exchange organization consisting of one Exchange 2010 SP1 server at the corporate office and a 2nd server (mailbox) at another location. The other location also has a CAS server. We need to apply SP3 to Exchange and
have already performed the schema update for SP3.
My question is: are we able to install SP3 on the corporate Exchange server
now and apply SP3 to the remote CAS and mailbox servers later without causing any Exchange Organization issues? Server downtime at the corporate office is easier to schedule than the remote location which needs change
control notification and planning well in advance as they operate 24/7.
I just don't want to upgrade one server then cause problems throughout the Organization as Exchange is heavily used. We need to upgrade to SP3 not only because it is the latest SP that resolves a host of issues but also to prepare for
a hybrid deployment of Office 365.
Thank you in advance,
Joe

You would want to update CAS servers first, prior to any mailbox servers.
Is the single Exchange server in the corporate office multi-role?
Do you have a DAG between the two mailbox servers going over the WAN connection?
http://supertekboy.com/2014/05/01/exchange-2010-installing-service-pack-3/
Check out my latest blog posts on www.supertekboy.com A tech blog for I.T. Superheroes.

Exchange 2010 Service Pack 1 and Unity 7.0(2)

We are in the process of migrating from Exchange 2003 to Exchange 2010. We had everything working with 2010, but wanted to install SP1 prior to migrating users over to the new Exchange server.
After installing SP1, messages are no longer being transfered to the Exchange server. We've re-run the permissions wizard, thinking that the update may have undone some permission setting. This succeeded, but we still get nothing.
Has anyone else installed SP1 for Exchange 2010? If so, any issues?

For those with Unity 7.0(2) integration with Exchange 2010, please refer to this defect CSCti70702 and you may find your answer to the multiple issues you are experienced. It has to do with MS/CDO library.
https://supportforums.cisco.com/docs/DOC-12848
http://support.microsoft.com/kb/2405611

Data Warehouse - Synchronization Performance view not available/working

Hi!
How can I populate this view. I have no Performance counters to choose from. see attached picture. Come to think of it, I have a lot of empty views and reports - why is that?
Best regards
Rune Haugen

Hi,
The performance collection rules are disabled by default. You just need to turn them on.
For more information, please review the link below:
Dell Management Packs in System Center Operations Manager 2007 R2
http://serverfault.com/questions/150251/dell-management-packs-in-system-center-operations-manager-2007-r2
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Exchange 2010 Management Pack Data Warehouse Synchronization Fails

Similar Messages

Maybe you are looking for