Exchange 2010 messages to GMail hanging in queue

Hello, I am running Exchange 2010 SP2 on Win 2008 R2 SP1 with all roles running on a single hub server with separate ISA 2006 server but no edge transport server.<o:p></o:p>
For about a week now, all messages sent to GMail hang in a queue and will not release. In queue Viewer the status shows as Active, SCL is -1, Source is FromLocal and the Last Error is always
blank. The message detail shows an Expiration Date but nothing happens when the message goes beyond that time. It just keep sitting there forever. There are no errors or failure reports or anything.<o:p></o:p>
The only way I have figured to release them is to restart the Transport Service which then clears the queue.
This is the only Domain I am having trouble with.
Any ideas on where to look would be greatly appreciated.<o:p></o:p>

Hi Gavin, thank you, they both look normal.
nslookup returns:
Server:  UnKnown
Address:  ::1
Non-authoritative answer:
google.com      MX preference = 40, mail exchanger = alt3
google.com      MX preference = 20, mail exchanger = alt1
google.com      MX preference = 50, mail exchanger = alt4
google.com      MX preference = 10, mail exchanger = aspm
google.com      MX preference = 30, mail exchanger = alt2
alt3.aspmx.l.google.com internet address = 173.194.66.27
alt1.aspmx.l.google.com internet address = 173.194.76.26
alt4.aspmx.l.google.com internet address = 173.194.65.26
aspmx.l.google.com      internet address = 209.85.225.26
alt2.aspmx.l.google.com internet address = 173.194.73.26
Non-authoritative answer:
Name:    google.com
Addresses:  74.125.225.129
          74.125.225.131
          74.125.225.130
          74.125.225.137
          74.125.225.142
          74.125.225.132
          74.125.225.133
          74.125.225.134
          74.125.225.136
          74.125.225.135
          74.125.225.128
I can telnet to all of the google IP addresses at port 25 and get:
220 mx.google.com ESMTP 34si23638427wej.56
helo
250 mx.google.com at your service
Any other ideas?

Similar Messages

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • Exchange 2010.SP3: Spam in Outbound Mail Queue (mail.que) - How can this be prevented?

    I have been suffering from SPAM being generated from a series of sources (this looks internally generated):
    Identity: XXXX-Exchange\7\10
    Subject: Undeliverable: Daily Health News
    Internet Message ID: <[email protected]>
    From Address: <>
    Status: Ready
    Size (KB): 12
    Message Source Name: DSN
    Source IP: 255.255.255.255
    SCL: -1
    Date Received: 15/01/2014 09:00:22
    Expiration Time: 17/01/2014 09:00:22
    Last Error:
    Queue ID: XXXX-Exchange\7
    Recipients: 
    [email protected];2;2;;0;CN=Exchange Internet Connector,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XXXX,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXX,DC=local
    XXXX: Refers to domain and naming convention.
    Why are these messages being generated? I know these are NDR's.
    What can I do about it? Already checked the Recipient filtering is enabled and refreshed it.
    I have already cleared down the mail.que file and checked that the Endpoint Protection is in place and up to date.
    The anti-spam option is enabled on the Hub Transport of the Organisational Configuration.
    This has led to Backscatter.org blacklisting the IP address.
    What else can I do about this situation as I have used all Microsoft KB and TechNet solutions to no avail?
    Thanks
    Paul
    Paul.B

    Hello,
    I think you can also consider the using the Transport Permissions to control the spams:
    HOW TO: Prevent annoying spam from your own domain
    http://exchangepedia.com/2008/09/how-to-prevent-annoying-spam-from-your-own-domain.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality,
    safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Exchange 2010 Message Tracking Logs and Calendar appointments

    A little context here...  We consume our message tracking logs with splunk so I can easily search and locate entries as needed.  I have an alert that generates an email when specific calendars accept a meeting request.
    I can pull the meeting title and specific calendar name, but the problem I am having is determining when the "meeting" is scheduled.  The data in the tracking logs shows me that the meeting was accepted today, but the actual meeting may not
    be for a week or more in the future.
    Is there any data in the tracking logs that can be translated to show the actual date of the meeting?
    Here is an example sanitized meeting request and acceptance
    REQUEST:
    2014-05-29T18:44:29.183Z,fe80::xxx,xxx,,xxx,"MDB:xxxx,
    Mailbox:xxxx,
    Event:92395630, MessageClass:IPM.Schedule.Meeting.Request,
    CreationTime:2014-05-29T18:44:28.762Z,
    ClientType:MOMT",,STOREDRIVER,SUBMIT,,<[email protected]>,,,,,,,Leaving
    Early,[email protected],,2014-05-29T18:44:28.762Z;LSRV=xxx.com:TOTAL=0,,,,,S:ItemEntryId=00-00-00-00-72-F7-4F-55-9A-2E-40-4C-93-52-BC-B4-7A-79-0D-92-07-00-40-1B-2D-18-F9-4B-C3-40-84-81-FF-EA-46-AC-E3-0D-00-00-00-00-00-09-00-00-40-1B-2D-18-F9-4B-C3-40-84-81-FF-EA-46-AC-E3-0D-00-00-09-95-6F-D7-00-00
    RESPONSE
    2014-05-29T18:44:31.211Z,fe80::xxx,xxx,,xxx,"MDB:xxx,
    Mailbox:xxx,
    Event:47712341, MessageClass:IPM.Schedule.Meeting.Resp.Pos,
    CreationTime:2014-05-29T18:44:30.353Z,
    ClientType:EventBasedAssistants",,STOREDRIVER,SUBMIT,,<[email protected]>,,,,,,,Accepted:
    Leaving Early,[email protected],,2014-05-29T18:44:30.353Z;LSRV=xxx.com:TOTAL=0,,,,,S:ItemEntryId=00-00-00-00-F2-AF-A9-28-DA-90-61-43-92-18-C5-86-08-7C-FE-1C-07-00-66-37-7F-D0-4D-82-73-48-8B-E2-10-A1-0B-58-DF-77-00-00-00-A5-FF-57-00-00-66-37-7F-D0-4D-82-73-48-8B-E2-10-A1-0B-58-DF-77-00-00-00-A6-31-9A-00-00

    Actual date of the meeting wouldn't be there in the message tracking log. As name says its tracking log for the message in transit, not the content information :) 
    Actual meeting date/time should be inside the meeting message under one of the message property which you can look by opening meeting in outlook or via MFCMapi if you want.
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Unity 5.0(1) with Exchange 2010

    According to the following link, Unity 5.0 supports Exchange 2010 as the partner Exchange server.
    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/7x/using_exch2010/usingex2010withcu7x5x.html#wp47622
    However, when I get to step 14 of this document (installing ExchangeMapiCdo.exe) I get an error saying it can't be installed with this version of Exchange.
    I was just wondering if anyone elsel had tried to run Exchange 2010 with Unity 5.0 and if so, how you were able to get it to work.  I followed all the steps in this document and everything seemed to be working until this step.

    3 things:
    1) You should get a TAC case going, if you haven't already.
    2) For Unity 5x, ES83 was replaced by ES85 (which was yanked off the download site almost like a ghost in the night) and now there is ES86.  You may want to read up on what is fixed here in this ES.
    3) I think you may have your service account mailboxes homed in the wrong place.  If you note there, is a section for where to put the mailbox for the UnityMsgStoreSvc.  Excerpts I'm looking at are:
    Adding One or More Exchange 2010 Servers to an Existing Cisco Unity 7.0 and/or 5.0 Installation
    Step 14 On the Cisco Unity server, install ExchangeMapiCdo.exe, which you downloaded in Step 4.
    Step 15 On the Cisco Unity server, install the version of the Permissions wizard that you downloaded in Step 2.
    Step 16 Run the Permissions wizard, and select the Exchange 2010 message stores in which mailboxes for Cisco Unity subscribers will be homed.
    Step 17 At the end of the Permissions wizard, on the You Have Completed the Cisco Unity Permissions Wizard page, click Granting Microsoft Exchange Administrator Rights, and do the procedure in the Help file to add the installation and directory services accounts to the Exchange 2010 Organization Management role group.
    Step 18 Restart the Cisco Unity server.
    Step 19 Move or create a mailbox for the Cisco Unity message store services account (typically UnityMsgStoreSvc), as applicable:
    Exchange 2003 or Exchange 2007
    mailbox already exists
    Move the mailbox for the account to Exchange 2010.
    No mailbox
    Create a mailbox for the account in Exchange 2010.
    Step 20 Remove the Exchange 2010 RPC limit for the message store services account by creating and applying a new mailbox policy to the message store services account:
    a. Open an Exchange 2010 Management Shell window.
    b. Create a new policy with unlimited RPC connections, for example:
    new-throttlingpolicy -name "Unity Exchange 2010 Policy" -RCAMaxConcurrency $null
    c. Apply the new policy to the message store services account, for example:
    set-mailbox -identity "UnityMsgStoreSvc" -throttlingpolicy "Unity Exchange 2010 Policy"
    d. Confirm that the mailbox is using the new policy, for example:
    get-mailbox -identity "UnityMsgStoreSvc" | fl | findstr "Throttling Policy"
    e. If you have more than one Cisco Unity server: Repeat Step c and Step d for every message store services account in the forest.
    We recommend that you apply the policy to all message store service accounts, even the accounts for Cisco Unity servers for which you do not currently intend to home subscriber mailboxes in Exchange 2010 message stores. Applying the policy does not affect Cisco Unity performance, and it ensures that you will not encounter problems if you later move mailboxes to an Exchange 2010 server.
    f. On each Exchange 2010 server with the CAS role, restart the Microsoft Exchange RPC Client Access service.
    Personally, I would make sure you have all of these items down to a tee because, IMO, there is likely something that went astray in the install/backout/fix process.
    Hailely

  • Message Tracking and Queue Viewer access is denied - Exchange 2010

    Hello,
    I am experiencing Message Tracking and Queue viewer problems on my exchange server.
    Message Tracking problem
    When i run message tracking via EMC or powershell, i receive the following error;
    Failed to connect to the Microsoft Exchange Transport Log Search server on computer "myserver.mydomain.com.br". Verify that a valid computer name was used and the Microsoft Exchange Transport Log Search service is started on the target computer. The
    error message is: "Access is denied".
    Exchange Transport Log Search service is confirmed running and have tried by restarting the service
    Logon user is a member of Domain Admins, Enterprise Admins and Exchange Organization Administrators
    Message Tracking Logs are generated properly
    Queue Viewer problem
    When i run Queue viewer, i receive the following error;
    The Queue Viewer operation on computer "myserver.mydomain.com.br" has failed with exception. The error message is: Access is denied. It was running command.............................................................
    My server information are as follow;
    4 Exchange Server 2010 sp3
    2 Mailbox Server and 2 Hub/CAS
    Mail-flow is working fine
    What should I grant permission for a group of users can have access to the Message Tracking ?
    Regards,

    Hi!
    The group rule was created as described below. The error persists!
     [PS] C:\Windows\system32>Get-RoleGroup "Exchange Access Message Tracking" | fl
    RunspaceId                  : 4229f35d-90f1-4c4e-822d-387979921052
    ManagedBy                   : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
    RoleAssignments             : {Message Tracking-Exchange Access Message Tracking}
    Roles                       : {Message Tracking}
    DisplayName                 :
    ExternalDirectoryObjectId   :
    Members                     : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
    SamAccountName              : Exchange Access Message Tracking
    Description                 :
    RoleGroupType               : Standard
    LinkedGroup                 :
    Capabilities                : {}
    LinkedPartnerGroupId        :
    LinkedPartnerOrganizationId :
    IsValid                     : True
    ExchangeVersion             : 0.10 (14.0.100.0)
    Name                        : Exchange Access Message Tracking
    DistinguishedName           : CN=Exchange Access Message Tracking,OU=Microsoft Exchange Security Groups,OU=Global,DC=ba
                                  ncobmg,DC=com,DC=br
    Identity                    : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Trackin
                                  g
    Guid                        : 0957152d-2073-4f75-b40e-63f45eb20f67
    ObjectCategory              : bancobmg.com.br/Configuration/Schema/Group
    ObjectClass                 : {top, group}
    WhenChanged                 : 06/02/2014 16:25:26
    WhenCreated                 : 06/02/2014 16:25:26
    WhenChangedUTC              : 06/02/2014 18:25:26
    WhenCreatedUTC              : 06/02/2014 18:25:26
    OrganizationId              :
    OriginatingServer           : bmg190.bancobmg.com.br
    [PS] C:\Windows\system32>Get-ManagementRoleAssignment "Message Tracking-Exchange Access Message Tracking" | fl
    RunspaceId                   : 4229f35d-90f1-4c4e-822d-387979921052
    User                         : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                                   ng
    AssignmentMethod             : Direct
    Identity                     : Message Tracking-Exchange Access Message Tracking
    EffectiveUserName            : All Group Members
    AssignmentChain              :
    RoleAssigneeType             : RoleGroup
    RoleAssignee                 : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                                   ng
    Role                         : Message Tracking
    RoleAssignmentDelegationType : Regular
    CustomRecipientWriteScope    :
    CustomConfigWriteScope       :
    RecipientReadScope           : Organization
    ConfigReadScope              : OrganizationConfig
    RecipientWriteScope          : Organization
    ConfigWriteScope             : OrganizationConfig
    Enabled                      : True
    RoleAssigneeName             : Exchange Access Message Tracking
    IsValid                      : True
    ExchangeVersion              : 0.11 (14.0.550.0)
    Name                         : Message Tracking-Exchange Access Message Tracking
    DistinguishedName            : CN=Message Tracking-Exchange Access Message Tracking,CN=Role Assignments,CN=RBAC,CN=BANC
                                   O BMG SA,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=bancobmg,DC=com,DC=br
    Guid                         : c3768a00-3f36-4532-b586-a06842a85e24
    ObjectCategory               : bancobmg.com.br/Configuration/Schema/ms-Exch-Role-Assignment
    ObjectClass                  : {top, msExchRoleAssignment}
    WhenChanged                  : 06/02/2014 16:25:26
    WhenCreated                  : 06/02/2014 16:25:26
    WhenChangedUTC               : 06/02/2014 18:25:26
    WhenCreatedUTC               : 06/02/2014 18:25:26
    OrganizationId               :
    OriginatingServer            : bmg190.bancobmg.com.br
    How can I identify if there is any setting to be done?
    Thank you!

  • Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

    Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples.
    I was wondering, what's going on here. When checking queues using Get-Queue cmdlet it doesn't show more than couple of messages in the queue.
    How do I get this fixed? This seems to be a known issue from thread http://social.technet.microsoft.com/Forums/en-US/ac121f02-4359-4d18-b86a-9c9c78b320a9/perfmon-messages-queued-for-delivery-2147483764?forum=exchange2010
    Any assistance would be greatly appreciated.

    Hi ChaituNanl,
    Thank you for your question.
    By our search, I suggest we update Exchange to Exchange 2010 CU6 or later, because problem also seem to appear to Exchange CU5 or former.
    We could download the CU by the following link:
    http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
    Notice: please note the version of  Exchange Service Pack
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim

  • Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

    We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
    I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
        get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
    One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
        http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
        "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
    tests using troubleshooting scripts find no issues with search indexer,
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
        Get-EventLog : No matches found
        At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
        + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
        -eq $msftesqlCrashEventId}
            + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
            + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
        Name IsDeadLocked CatalogStatusArray
        SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
    and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
        Server Database ServerGuid ResultFound SearchTimeInSeconds Error
        SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
    I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
    We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
    Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
    same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

    Hi IAMChrisL,
    Any updates?
    Frank Wang
    TechNet Community Support

  • Public folders stuck in Mail queue when replicating to Exchange 2010

    This last weekend I installed Exchange 2010. Moved everyone over the same night to the new server. Mail flows in and out in ex 2010. The problem is I can't get the Public folders to replicate across. At the same time I found I can't send mail between the
    two exchange servers. In the message Queue on the Ex 2007 box I see the public folders are just sitting there waiting to be sent but stuck. Along with my test emails.
    I found an artical that talks about going into ADSIEdit and delete the old exchange 2003 empty server folder. Did that and email is still not flowing.
    Servers are in the same AD same subnet. ex 2007 is installed on a 2003 box. ex 2010 is on 2008r2.
    Thanks,
    Steve

    Hi vasdavidson,
    For this issue, I suggest you follow these steps to troubleshoot the problem:
    1.      
    Please paste the exact error you got in queue viewer.
    2.      
    On Exchange 2007, (use telnet) send emails to Exchange 2010, then check whether it can receive email or not.
    Thanks,
    Evan
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Exchange 2010 SP3 - "500 5.3.3 Unrecognized command" in SMTP Receive Log. Senders get message with the same problem

    Hi
    My exchange environment consist with "Server Exchange 2010 SP3" and "Edge Server with Exchange 2010 SP3".
    On Edge server in SMTP receive log i get every now and then an entry: xxxxxx 500 5.3.3 Unrecognized command.
    It is serius problem because I got few e-mails from senders that they had problem with sending e-mail messages to our e-mail domain. They receive e-mail report, for example
    Technical details of permanent failure:
    Google tried to deliver your message, but it was rejected by the server for the recipient domain domena.plby
    mail.domena.pl.
    [95.xxx.xxx.xx].
    The error that the other server returned was:
    500 5.3.3 Unrecognized command
    Could you help me to solve this problem? What could cause this problem?
    Thank you in advance
    Tomasz
    Kind Regards Tomasz

    I have the same issue, but there is plenty of hard disk storage on the Exchange Server. This seems to only be happening from Google Business account/ Postini. If I send message from my personal Gmail account it works fine, but an agency who is on Google
    business seems to have issues sending to us and they are delayed, sometimes they get through and other times they just don't. 
    Results from Mail Acceptance Test:
    I enter my internal address and the remote users postini account as the test setup I received two emails from the tool but the end results of the test are:
     Error submitting mail
            Mail submission failed: Error message: Syntax error, command unrecognized. The server response was: 5.3.3 Unrecognized command.
    Google support stated this:
    Here are the logs from Postini trying to connect to mydomain.com (IP x.x.x.x) :
    1. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP-STLS:OK <null> TLSv1:RC4-SHA Validate:None 2. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:MAIL FROM:<[email protected]>
    3. 2014/08/09 03:26:28 IP:209.85.218.50 Fdal:Customer has null root_iid outbound default at org 100000001 4, 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender <= FFD:250 Ok 5. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:RCPT TO:[email protected]>
    6. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD => mydomain.com (x.x.x.x):Connection established 7. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD <= mydomain.com (x.x.x.x):220 server.mydomain.com
    ESMTP Service ready 8. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:250 Ok 9. 2014/08/09 03:26:35 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender => FFD:968 last bytes of data with dot 10. 2014/08/09 03:28:05
    IP:209.85.218.50 To:[email protected] From:[email protected]:1119780 FP:2603ec6d38c69886eb1000e516fb745a0384e50b SMTP:Delivery still in progress after 90 seconds, recording FP 11. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP
    LOG: FFD => mydomain.com (x.x.x.x):failed to send the last period(.) 12. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] oremote:Skipping Archive for Sender because did not deliver message 13. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected]
    SMTP:451 Remote connection lost - psmtp 14. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:451 Remote connection lost - psmtp
    As you can see, on line 9, at 03:26:35, we declared to the receiving server what we were about to send. At the line number 10, almost two minutes passed without an authorization (250 OK) from the receiving server. You can see our status being pushed back
    at that moment to the receiving mail server: SMTP:Delivery still in progress after 90 seconds. Two more minutes later the connection was simply dropped and so we generated a 400 error message to encourage the sending server to try again later (since no bounce
    was given per say from the receiving server, we won't hard-bounce it but defer it).
    I hope this will help. you can try to look in the mydomain.com  inbound logs and see at that exact time what happened? Unfortunately, our visibility pretty much ends there as we don't have full visibility of your mail environment. You'll need to investigate
    within your own environment unfortunately. If you have any more information to share with me, in case it might help me help you, feel free to do so. I'll leave this case opened for now.
    Sincerely,
    Patricia
    Google Enterprise Support

  • Exchange 2010 - Accepting Messages Above the Attachment Size Limit

    Recently we implemented a new Exchange 2010 server in a site. This site is in another country with very poor WAN connectivity.  Our standard attachment limit is 50MB (51200 kb) .
    Since we have put this server in place I am seeing messages get stuck in the queue that are above the 50MB limit.
    What I am confused about is how are they making it there, why is Exchange accepting them?  I have checked all the connectors, they are all appear to be set correctly.
    What I also notice is these messages sit in the queue and get error:
    421 4.4.2 Connection dropped due to ConnectionReset
    Any ideas?

    Consider applying an enterprise limit by using Set-TransportConfig -MaxSendSize -MaxReceiveSize.
    http://technet.microsoft.com/en-us/library/bb124151(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Email Delivery problem from Mailman to Exchange 2010 SP3 - Invalid Character Set Name in Message Subject

    Dear all,
    we have a problem in the email delivery from Mailman 2.6 List Server to Exchange 2010 SP3 CU7, 
    related to the encoding name of the Message Subject.
    The error we receive is the following:
    #550 5.6.0 CAT.InvalidContent.Exception: InvalidCharsetException, Character set name (iso8859-7) is invalid or not installed.; 
    cannot handle content of message with InternalId
    First of all, we can notice that given an encoding name as 'iso-8859-X',  it is transformed by the Mailman to 'iso8859-X' (without the first dash). 
    Our previous Exchange version ( Exchange 2003) didn't have any problem with this, but now, 
    Microsoft Exchange 2010 doesn't like the form of the encoding name without the dash, 
    and bounces the emails from Mailman. 
    The strange is that other email systems like Gmail, Yahoo accept the transformed encoding name.
    Any help would be appreciated.
    Kind Regards
    Panagiotis Kontogiannis

    Hi Panagiotis,
    Base on my search, I found a similar issue which was caused by the antivirus software in exchange server.
    I recommend you try to disable all the antivirus services and check if any helps.
    The similar thread for you reference:
    https://social.technet.microsoft.com/Forums/en-US/5bcf3098-2fe7-442f-a0bd-b720d703c6d0/problem-with-microsoft-exchange-2010-on-sbs-2011-550-560-catinvalidcontentexception?forum=exchangesvrdevelopment
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Z10 with Exchange 2010 Activesync missing incoming messages

    Z10 with Exchange 2010 Activesync won't download all messages, missing messages include messages sent to internal Exchange distribution groups and bulk email (I could live with this one, lol) Activesync works fine on iOS and android devices (100+ devices in my organization with no issues). Tried enabling secure IMAP on the exchange server, and with this config the messages are delivered, but the body of the same messages missing with the activesync setup have a [No body found] in the message body and are otherwise blank. Tried running the EAVT tool and it returns "Nothing was found for provided credentials" . My personal Gmail account works fine on the phone, tried loading the 10.1 Blackberry OS and had the same problem. Tried setting up the account multiple times, used both autodiscover and manual setup to no avail. Any thoughts? Thanks in advance for your help!

    Hey cyberayk,
    Welcome to the BlackBerry® Support Community Forums.
    Do these email messages get redirected to a different folder on the Exchange Server?  If yes, On the BlackBerry smartphone go to Settings > Accounts> Select the account> Edit Folder Settings, are these folders selected? 
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Transport rule exchange 2010 not sending reply gets stuck in Queue

    I am trying to set up a transport rule in exchange 2010 that will auto reply to a email address that is no longer valid. One of our exec passed away and they want a reply setup to send an automatic message. I read somewhere that the auto reply may not be
    the right way to go about this so I was trying to setup a transport rule. I used the wizard to make the rule for conditions 1 all outside email addresses 2 sent to the internal email address specified. Actions 3 Send rejections message to sender with enhanced
    status code
    Created the message in the rule and gave it a status code 5.7.228 no exceptions and created the rule
    Went to an outside email account and sent to the internal users account. It was reported that it was delivered from our mail filter I verified that it did not get delivered to the user then a few min later the reply appears in the queue viewer on exchange
    a few min later it is gone I figured it worked but when I checked it did not get delivered to the outside email address or seen going through the mail filter. I'm missing something I know its right there somewhere just looking to long and I cant see it.
    This is baffling me as to what happened? What account is it sent from? The user, administrator or do I need to create a postmaster account for it to work? I am a one man shop and it get kind of baffling some times
    Thanks in advance for any help I will keep looking for the answer
    John R
    John R

    Hi John,
    From your description, I would like to verify the following things for troubleshooting:
    1. Please verify if users can send messages to external email addresses.
    2. Please check if internal users can receive the rejection messages.
    Best regards,
    Amy Wang
    TechNet Community Support
    Yes users can send to external address and internal users receive NDR rejection messages
    The system has been in production for 2 years. I'm just trying to find the best way to setup a auto reply for users that are no longer with us or have moved on.
    Thanks for your help
    John R

  • Unified Messaging Exchange 2010 with Jabber

    Is anyone aware of a way to have Jabber integrate with Exchange 2010 for voice-mail?
    I have CUCM trunked to the server, the calls are going to the server and you can leave a voice mail and phone MWI lights up.
    I have the voice-mail icon on the jabber client and when I press it, it goes to the voice mail box.
    The issue is that it says its not connected, and when people leave a voice-mail, Jabber does not indicate you have a message.
    We are running CUCM 9.1, CUPS 9.1, Jabber4W 9.7
    Any input would be greatly appreciated.
    Thanks
    Phil

    Jabber for windows 9.7; only supports VMREST voicemail access. The only option for this is unity connection 8.5 and above. Connection to Exchange 2010 form of unified messaging (voicemail service through exchange server alone) is not supported.
    Please refer to the following link;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_01.html#JABW_RF_SEF029A0_00
    On-Premises Servers for Cisco Jabber for Windows and Cisco Jabber for Mac
    Cisco Jabber supports the following on-premises servers:
     Cisco Unified Communications Manager version 8.0(1) or later
     Cisco Unified Presence version 8.0(3) or later
     Cisco Unity Connection version 8.5 or later

Maybe you are looking for

  • IPod shuffle 4th generation will not turn on?!?!

    My iPod shuffle 4th generation flashes red for 3 seconds when connected to the USB charger but will not turn on, charge or connect to the computer.  This means i can not go through the basic trouble shooting reset steps.  I tried turning it off waiti

  • Enterprise Manager menu is missing in the WAR deployment

    I installing CFMX8 and a pair of test servers. I did a multiserver CFMX8 install because I was having a heck of a time getting the WAR deployment version install (on Windows 2003 with JRun4). When I got CFMX8 finally installed via a WAR deployment, I

  • Restrict Opportunity access from other Org Unit Sales agent

    Hello, My Scenario is, there is different Organisation Units and Sales agents are assigned to those Org units. Now the issue is, Sales agent from one Org unit is looking into the opportunity of other Org unit. As the sales agents have their own targe

  • Apex Application Export

    hi, Could any one let me know if we could take the complete export of the apex applications present in our workbench instead one by one. can the admin do. for example we have 100 apex applications in our workbench and we need to take the compete expo

  • Error  " Selected numbers does not agree with transferred"

    Hi, While in production support I got a issue saying Error  " Selected numbers does not agree with transferred" How to solve this. Regards San Reddy