Exchange 2010 - Method to send e-mail when the WAN IP is dynamic

Hello,
I am writing due to the fact that I cannot send e-mail from my Exchange 2010 Server to my Yahoo! address for testing. When trying to do so, I get the following error message:
mta1106.mail.gq1.yahoo.com gave this error:
Mail from xxx.xxx.xxx.xxx not allowed - 5.7.1 [BL21] Connections not accepted from IP addresses on Spamhaus PBL; see
http://postmaster.yahoo.com/errors/550-bl21.html [550]
As one can see, because my IP address is residential, I cannot send e-mail to all addresses on the web. I really would like to use this as my primary contact, and thought of using a proxy. Can someone recommend a good proxy, or workaround for this? I am
sorry for posting in Exchange 2013, but I couldn't find the 2010 forum. Thank you to all who reply.
Mike

Thank you for your reply,
I have set up DynDNS, and I am currently using my own domain name. The problem was I needed to configure a smart SMTP host, or relay server on my send connector. I decided to go with SMTP2GO, as they are cheap, and allow you to send 20 e-mails a day for
free. When the money is right, I plan to upgrade.
Thank you for your help.
Mike

Similar Messages

Intent_driven Interaction: Sending E-Mail when the Service Request is saved

Hi,
I would like to send automatically an E-mail when the Service Request is saved. I created a new policy within context "Intent Driven Interaction" . I chose the IC event "OrderSaved" and the relevant Business Roles. In my rule I chose the condition "If current Event equals Order was saved" and the action "Send out going E-Mail Using Mail Form". I created an interaction profile that is assigned to the Service Manager Profile "IDI Default".
It does not work. Any idea ? Is there a way to test this type of rule ?
Thanks a lot !!!

Thanks a lot for your fast response, unfortunately this is not what i was looking for.
Kind regards
Hannes
If your question is solved, please mark as answered.
Edited by: Hannes Wegehenkel on Sep 22, 2010 2:38 PM

Need to send Automatic mails when the report successful or Fail.

Hello Experts,
Created one report for reconciliation to check BW and R/3 figures.
There are exceptions designed using reporting Agent settings on the same report.
(When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
There are some mandatory variables for Company code, Period and Currency Type.
Selections for Company code and Period are fixed but We have three currency types (00,10,30)
Reports needs to be executed for three currency types.
Requirement is that
when the report is executed for One currency type (Ex u2013 00)
If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
Sending mails can be taken care by BASIS people with SMTP configuration.
I want to know the development needs to be done from BW side.
Are there are any settings in BW to send the message as Successful when the report shows green color and message as failed when red color appears in the report.
Regards,
Siva.

Hi,
As i understand you need to set up an alert framework.
Please check :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
This can also be achieved using BEx broadcaster
Please check :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
Hope this helps.
-Vikram

Exchange 2010 – Export details about e-mails in the DB

Hi
We have an Exchange 2010 server (v14.03.0195.001) and now we have a need for doing an extended report of all the e-mails received between 1 March (DateStart) and 1 Sep 2014 (DateEnd).
I am looking for a script (or program) exporting info about all the messages. The script should work like:
1: For each mailbox dump the content to a file equal %User%.csv (Comma or TAB separated)
2: For each message received between %DateStart% and %DateEnd% write one line to the file – the line should contain:
A: Time received (preferable in the format YYYY.MM.DD HH.MM.SS)
B: The IP-address the e-mail was sent from – retrieved from the message header (we subscribe to a cloud spam / antivirus service and all incoming e-mails are received from this company's IP address - this IP-address don't make sense)
If easier all the IP-addresses the e-mail have "gone through" can be listed separated with ";")
C: E-mail address the message was sent to
D: Subject
E: Name of all attachments separated with ";"
Nice if the script will report to the screen during the run:
Username / user number and how many messages has been listed to the %User%.csv file (update for each 1000? message)
I am ready to pay some money for a working script or buy a "report generator" which can be used for this purpose. Nice if you have some advice.
Best regards Harald

>>The server response was: 4.3.1 Insufficient system resources
This usually means that there are not enough free disk space on the disk containing the mail.queue so check that.
Also, see the information in the below Technet Article.
Understanding Back Pressure
http://technet.microsoft.com/en-us/library/bb201658.aspx
Martina Miskovic

CCMS not sending e-mail when system is down

I have installed solution manager 4.0 and configured it as a CEN to handle all CCMS alerts from our SAP systems (ECC5.0, BW, etc), these systems all have CCMS agents install and configured. The configurations work no problem. We get automatically notifications on a lots of events -- such as shortdumps, responses time, system log errors, etc. However, we never get e-mail notifications on following two situations:
1. System down -- when one system is down, we can see it availability is going to 0% on solution manager but we did not get e-mail, I am using MTE class "Availability_SysPercent_ABAP", it should send e-mail when it below 60%. But it never did even it's 0%. Also tried several other MTEs, but none of them work. Is this because when system is down, CCMS not work any more or something else?
2. Job cancel -- I am not what MTE class to use in order to send e-mail when some jobs are cancelled.
Any help are greatly appreciated.
Yujun Ran

I don't know if this is correct but my Execution is "Any server" and it works.
I assume you copied the same method for your central AR method. The person earlier who mentioned clients may have something. I don't use the CCMS_OnAlert_Email_V2 method so I'm not sure but I think the parameters need to have a user in 000 with an e-mail address in the user master in order to send. I don't think this is any different for the Central AR method which works for you so probably not the problem but double-check. I use the CCMS_Send_Alert_to_ALM_V2 method so my config will be a little different.
Is SAP_CCMS_MONI_BATCH_DP scheduled in CEN? Mine is in the working client but again, not sure if it matters.
Does the AR method you have assigned show up in RZ20>>Change mode>>View>>Method allocation?
Is the send job in SAPCONNECT scheduled, I believe it behaves differently with local and central AR's.
Message was edited by:
David Hill

Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error

Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error my internal and external domains are different i have godaddy certificate and i have redirected HTTP to HTTPS for OWA, but when i run the test-ActiveSyncConnectivity
https://mail.mycompany.com/Microsoft-System-ActiveSync it gives me error unable to connect to remote server, the connected party did not respond after a period of time because connected server failed to respond 67.57.66.23:443
From outside owa and activesync is working but my outlook 2007 SP2 shows disconnect every 25 minutes and then connected again when i see windows evenyviewer i am getting error that CAS Server failed to connect to mailbox server. Later it disconnected for
60 seconds, I think thats when outlook gives disconnect error to all users
Your quick help is really appreciated

Hi,
Hope below KB will help you for resolution the issue
http://support.microsoft.com/kb/2469722
http://www.wiki-errors.com/err.php?wiki=443
Dinesh S.

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How to send e-mail when a trigger condition is verified?

Hi,
I want to implement a trigger to send an e-mail when the condition of the tigger is verified.
Thanks in advance.
Paulo.

i'm using the sample code you can find at http://otn.oracle.com/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html to implement the mail function.
Check out you gateway configuration cause i had some problems with it at the beginning
my trigger goes like this (i use it to receive a mail everytime i have a exception in one of my processes):
create or replace trigger TRG_error_handle
after insert on errores
for each row
begin
demo_mail.mail(sender => "sendername", recipients => "your emailadress",
subject => 'Error en reporte ' || :new.proceso,
message => 'Ha ingresado un error de aplicación a las ' ||
to_char(:new.fecha, 'hh24:mi:ss') || ' del ' ||
to_char(:new.fecha, 'dd/mm/yyyy') || chr(13) ||
' Proceso: ' || :new.proceso || chr(13) ||
' Mensaje de error: ' || :new.err_desc);
end if;
end TRG_error_handle;
Good luck.-

Send a mail to the customer when their order of type Residential Credit is booked

Hi,
We need to send a mail to the customer when their order of type Residential Credit is booked.
I followed the below steps, but i could not write the code for sending email, can you please send me a sample code.
Step1:
=======
Setup Processing Constraint on Order Header/Line for order booking
*(Navigation : Setup --> Rules --> Security --> Processing Constraints)*
a) Set Application : Order Management, Entity : Order Header
b) Under constraints --> set Operation : Create, user Action : Raise Integration event, and make it enabled
c) Condition --> Set Scope : Any, Validation Entity : Order header, record Set : Order, Validation Template : Booked and make it enabled too.
Step2:
========
Profile Option: Set "OM: Electronic Message Integration Event Sources" to be set to All
Step3:
========
Develop a code(Package) /workflow as per business requirement. e.g sending mail to customer when order is booked.
Step 4:
=======
Open business event *"oracle.apps.ont.oi.xml_int.status"* through workflow Administrator responsibility. Include code/workflow in the subscription section of Business event.
Navigation : WF Administrator Web application ---> Administrator Workflow --> Business Events
Search Name : oracle.apps.ont.oi.xml_int.status, it will return 1 record, click on subcription...
In this page include the function e.g CLN_CH_EVENT_SUBSCRIPTION_PKG.ADD_COLLABORATION_EVENT_SUB, if you are using WF, mention (e.g) wf_rule.default_rule in function & Workflow as OEEM/WRITE_HISTORY and enable it in this page..
Thanks and Regards,
Priya

Just wanted to let you guys know that I still haven't received my MP3 player... Creative has had the MP3 player for 73 days now and they still haven't sent it back. Since last time I wrote here I got an e-mail from Creative saying they got the MP3 player on the 5th of the November and that somehow the status wasn't updated. Well, it's been 73 days now, care to send it away? I sent them and e-mail yesterday where I wrote that they could just send me the cash for it or a new MP3 player.
If I don't receive my MP3 player in a near future I will contact "Allm?nna Reklamations N?mnden" (a Swedish "Consumerist"-like government sponsored organization that deals with people vs company legal cases).
Again, I strongly advise everyone to not buy any more Creative products. Once they break you won't get the help you need.

"Send e-mail when ownership is assigned" SharePoint 2013 task list

I've found that the option to "Send e-mail when ownership is assigned" isn't available in SharePoint 2013 (enterprise) task lists. I've found that this functionality is now included the 'issue tracking' list template.
I'm unsure why this very useful feature has been removed from the task list template. I’ve tried adding the task content type to an issue list; this works fine and the notification is sent. However, the new ‘task aggregation’ feature
in mysite only picks up items in an task list, so those items stored in issue lists get ignored. Fairly frustrating.
I wonder whether anyone from MS can fill me in on when this feature has been removed?

Here's a way to enable it by PowerShell:
http://bernado-nguyen-hoan.com/2013/04/26/enable-email-notifications-for-tasks-list-in-sharepoint-2013/
Although this works, are we now expected to teach users who create Tasks and want to automatically notify all involved via e-mail Powershell skills? MS really needs to take a second look at this faux pas and bring the "Send
e-mail when ownership is assigned" option back.

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

How to create a procedure to send a mail if the Database is down?

Hi,
I have created the below procedure to send a mail if the count is less than 1300. It scheduled daily @ 15 30 hrs. Its fine.
CREATE OR REPLACE procedure SCOTT.hrsmail
is
v_count number;
begin
Select count(*) into v_count from emp;
if v_count < 1300
then
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Testing the UTL_MAIL Package',
message => 'If you get this, UTL_MAIL package
else
null; --what you want to do here
end if ;
end;
Sometime the Database is down, so the job is not running.
How to create a procedure to send a mail if the database is down?
Pls help me. Its highly appreciated.
Thanks
Nihar

nihar wrote:
How to create a procedure to send a mail if the database is down?And what if the database is up, but the network down? Or the database up and mail server down? Or mail server undergoing maintenance?
There are loads of "+What if's+" - and in that respect, playing "+What if database is down..+" in this case does not make any sense. You do not use the database to monitor its own up/down status. You do not rely just on SMTP as notification protocol that the database is down.
The correct approach would be using something like SNMP as the monitoring protocol. A monitoring system that can process SNMP and perform some basic root cause analysis (e.g. network to the database server down, database server status unknown). And this system supporting notification methods like SMTP, SMS and so on.

Any changes in PA30 need to send a mail to the Managers outlook inbox

Hi,
Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox .
Kindly let me know the Standard workflow template and to built the Custom function module in Rule .
Thanks in advance,
Richard A

<i>Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox</i>
If its just an email do u need a workflow for it? Configure dynamic actions which will call a subroutine when a change is made to the infotype and send email from that subroutine using SO_NEW_DOCUMENT_SEND_API1.(you can include the necessary logic for determining the approver in the same subroutine).
Thanks,
Prasath N

Send a mail to the vendor at the time of approval with the attachment of PO

Hi all,
I want to send a mail to the vendor at the time of approval by attaching the pdf of that particular PO.
How can I achieve this?
I know the User Exit where the code should be written.
But I want the solution for attaching the PDF of PO at the time of approval.
Please help me in this regard.
Edited by: vinil kumar aturi on Mar 16, 2009 7:52 AM

Hi,
Try Following Code to Send mail as PDF Attachment
In this
Smart form Name : ZSMART_MM_003
This will send mail to EMAIL ADDRESS SPECIFIED IN VENDOR MASTER FK03
This code is written for ME23n so we used nast-objky(10) for purchase order no you may replace it with your purchase order no
and smart form name with your smart form name
*-- Send Mail---
*-- Function Module Call to get Customer Address (Email)--
DATA: VENDOR TYPE ELIFN,
      ADDRNO TYPE ADRNR.
DATA: atab-mail TYPE STRING.
SELECT SINGLE LIFNR FROM EKKO INTO VENDOR WHERE EBELN = nast-objky(10).
SELECT SINGLE ADRNR FROM LFA1 INTO ADDRNO WHERE LIFNR = VENDOR.
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = ADDRNO
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
if sy-subrc = 0.
DATA: FILENAME TYPE STRING.
CONCATENATE 'PurchaseOrder' nast-objky INTO FILENAME SEPARATED BY '-'.
DATA: MESSAGELINE1 TYPE STRING,
        MESSAGELINE2 TYPE STRING.
CONCATENATE 'Do you want to send ' FILENAME ' through E-mail to' into MESSAGELINE1.
CONCATENATE atab-mail '?' into MESSAGELINE2.
data: answer    TYPE c.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
       EXPORTING
            defaultoption = 'N'
            textline1     = MESSAGELINE1
            textline2     = MESSAGELINE2
            titel         = ' '
            start_column = 35
            start_row     = 10
       IMPORTING
            answer        = answer.
IF answer EQ 'J' OR answer EQ 'Y'.
Code to find Contact person
    DATA: CONTACT TYPE EVERK.
    SELECT SINGLE VERKF FROM EKKO INTO CONTACT WHERE EBELN = nast-objky(10).
Internal Table declarations
    DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
          I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
          I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
          I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
          I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
          WA_OBJHEAD TYPE SOLI_TAB,
          W_CTRLOP TYPE SSFCTRLOP,
          W_COMPOP TYPE SSFCOMPOP,
          W_RETURN TYPE SSFCRESCL,
          WA_DOC_CHNG TYPE SODOCCHGI1,
          W_DATA TYPE SODOCCHGI1,
          WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
          V_FORM_NAME TYPE RS38L_FNAM,
          V_LEN_IN LIKE SOOD-OBJLEN,
          V_LEN_OUT LIKE SOOD-OBJLEN,
          V_LEN_OUTN TYPE I,
          V_LINES_TXT TYPE I,
          V_LINES_BIN TYPE I.
          DATA : s_control_parameters TYPE ssfctrlop,
                  s_output_options     TYPE ssfcompop.
                  s_control_parameters-getotf = 'X'.
                  s_control_parameters-no_dialog = 'X'.
                  s_control_parameters-preview   = 'X'.
                  s_output_options-tdnoprint = 'X'.
                  s_output_options-tdimmed   = ''.
                  s_output_options-tddest = 'LP01'.        "Spool: Output device
                  s_output_options-tdreceiver = sy-uname.
                  s_output_options-tdcover = ''.
         CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
         EXPORTING
            FORMNAME = 'ZSMART_MM_003'
         IMPORTING
           FM_NAME = V_FORM_NAME
         EXCEPTIONS
           NO_FORM = 1
           NO_FUNCTION_MODULE = 2
           OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
         W_CTRLOP-GETOTF = 'X'.
         W_CTRLOP-NO_DIALOG = 'X'.
         W_COMPOP-TDNOPREV = 'X'.
         CALL FUNCTION V_FORM_NAME
         EXPORTING
            CONTROL_PARAMETERS = s_control_parameters
            OUTPUT_OPTIONS = s_output_options
            USER_SETTINGS = ''
            nast          = nast
            WA_ADDRESS    = WA_ADDRESS
         IMPORTING
            JOB_OUTPUT_INFO = W_RETURN
         TABLES
            addtel = it_addtel
            addsmtp = it_addsmtp
         EXCEPTIONS
            FORMATTING_ERROR = 1
            INTERNAL_ERROR = 2
            SEND_ERROR = 3
            USER_CANCELED = 4
            OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Convert SMartform to pdf
      I_OTF[] = W_RETURN-OTFDATA[].
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT = 'PDF'
        MAX_LINEWIDTH = 132
      IMPORTING
        BIN_FILESIZE = V_LEN_IN
      TABLES
        OTF = I_OTF
        LINES = I_TLINE
      EXCEPTIONS
       ERR_MAX_LINEWIDTH = 1
       ERR_FORMAT = 2
       ERR_CONV_NOT_POSSIBLE = 3
       OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
      LOOP AT I_TLINE.
        TRANSLATE I_TLINE USING '~'.
        CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
        ENDLOOP.
        TRANSLATE WA_BUFFER USING '~'.
        DO.
          I_RECORD = WA_BUFFER.
          APPEND I_RECORD.
          SHIFT WA_BUFFER LEFT BY 255 PLACES.
          IF WA_BUFFER IS INITIAL.
            EXIT.
            ENDIF.
            ENDDO.
Attachment
            REFRESH: I_RECLIST,
            I_OBJTXT,
            I_OBJBIN,
            I_OBJPACK.
            CLEAR WA_OBJHEAD.
            I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
            I_OBJTXT = 'Sir, '.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Please Find Attached '.
            APPEND I_OBJTXT.
            I_OBJTXT = FILENAME.
            APPEND I_OBJTXT.
            I_OBJTXT = 'For your reference'.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Regards'.
            APPEND I_OBJTXT.
            I_OBJTXT = CONTACT.
            APPEND I_OBJTXT.
*Mail Subject
            DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
            READ TABLE I_OBJTXT INDEX V_LINES_TXT.
            WA_DOC_CHNG-OBJ_NAME = 'Purchase Order'.
            WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
            WA_DOC_CHNG-OBJ_DESCR = 'Purchase Order'.
            WA_DOC_CHNG-SENSITIVTY = 'F'.
            WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
            CLEAR I_OBJPACK-TRANSF_BIN.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            I_OBJPACK-BODY_NUM = V_LINES_TXT.
            I_OBJPACK-DOC_TYPE = 'RAW'.
            APPEND I_OBJPACK.
Attachment (pdf-Attachment)
            I_OBJPACK-TRANSF_BIN = 'X'.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
            READ TABLE I_OBJBIN INDEX V_LINES_BIN.
            I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
            I_OBJPACK-BODY_NUM = V_LINES_BIN.
            I_OBJPACK-DOC_TYPE = 'PDF'.
            I_OBJPACK-OBJ_NAME = 'smart'.
            I_OBJPACK-OBJ_DESCR = FILENAME.
            APPEND I_OBJPACK.
            CLEAR I_RECLIST.
            I_RECLIST-RECEIVER = atab-mail.
            I_RECLIST-REC_TYPE = 'U'.
            APPEND I_RECLIST.
            CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
            EXPORTING
              DOCUMENT_DATA = WA_DOC_CHNG
              PUT_IN_OUTBOX = 'X'
              COMMIT_WORK = 'X'
            TABLES
                PACKING_LIST = I_OBJPACK
                OBJECT_HEADER = WA_OBJHEAD
                CONTENTS_BIN = I_OBJBIN
                CONTENTS_TXT = I_OBJTXT
                RECEIVERS = I_RECLIST
            EXCEPTIONS
                TOO_MANY_RECEIVERS = 1
                DOCUMENT_NOT_SENT = 2
                DOCUMENT_TYPE_NOT_EXIST = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR = 5
                X_ERROR = 6
                ENQUEUE_ERROR = 7
                OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
Regards
Nausal

Exchange 2010 DAG Replication - too much data crossing the wire

I’m replicating 3 Exchange databases from our production active Exchange 2010 server across the WAN to another passive Exchange 2010 server at our DR site.
The Exchange server at the DR site does not have any active databases, i.e. no users are hitting that server.
We are running Update Rollup 8 for Exchange Server 2010 SP1 on both these servers.
The two sites are connected via a 10Mb/s MPLS connection and all the databases are in sync and the replication is working fine.
I have setup a network sniffer at the primary site and see a sizable amount of data crossing the wire from the production Exchange server to the DR Exchange server.
When I query the production Exchange server using the Tracking Log explorer and only choose the EventID ‘RECEIVED’ that should show me the amount of data that has been committed to the database.
If I choose a date range that is the same exact range that I have used to capture the raw data with my sniffer the amount of data the sniffer shows crossing the wire is 10 fold compared to what the Tracking Log Explorer shows.
If I actually count up the data in the LOG files it is about 20% more than what is crossing the wire but that seems to be because the DAG is compressing the data.
If in a one hour timeframe there is 500MB of data crossing the wire to the DR Exchange server the tracking log explorer will show only 50MB.
I would like to know why the data crossing the wire far exceeds the amount of data that is truly being sent/received from the primary exchange server.
Perhaps I’m simply not getting a true view of the amount of data being committed to the exchange server using the Tracking Log Explorer.
Maybe there is a better way to report how much data is being committed to the exchange databases.
Any assistance would be appreciated…

Two things.
1 - you must update Exchange to SP3 and a recent RU. Willard has already provided the links, which point back to my blog if you want to see the lifecycle map for Exchange 2010. SP1 has been out of support since January 2013. Time to move
on pllease
2 - Looking at the tracking log is not sufficient. I would not expect that to show everything.
I want to know what traffic you see as excessive. What ports are you seeing used here?
My money is on content indexing. CI will use additional traffic over and above log repl traffic. Expect CI traffic to be roughly the same again. You can test this by disabling CI on the database or stopping the services on the DR server.
To disable the CI for the database:
Set-MailboxDatabase DBName -indexEnabled $False
Or stop the Exchange search services on the DR box to leave production unaffected.
Again - you need to update Exchange. You would be better to do that now rather than when something breaks and Microsoft support cannot fully assist you since you are not uptodate.    I'll leave discussion of the security issues resolved
in recent Exchange RUs aside.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 - Method to send e-mail when the WAN IP is dynamic

Similar Messages

Maybe you are looking for