Exchange 2010 mit Mail 7.2 unter OSX 10.9

Ist Exchange 2010 mit Mail 7.2 unter OSX 10.9 kompatibel?

Hello Daryl,
Thanks for using Apple Support Communities.
I found another Apple Discussion covering the same topic, with a response showing it solved the issue.
How do I restore the "whoosh" sent mail...: Apple Support Communities
https://discussions.apple.com/thread/4236085
Take care,
Alex H.

Similar Messages

  • Exchange 2010 server (Mail,HUB and CAS) installation in new site.

    We are  planned to install Exchange 2010 servers(MAIL,HUB and CAS) server in new Active director site in existing exchange organization.
    Kindly share best practice link for exchange server installation in new site.

    The best practice for installing into a new Active Directory site is the same as installing into a new organization, except you don't need to prepare the organization or domains (unless you are also installing into a new domain that hasn't been prepared).
    Install the CAS then hub, then mailbox roles, or install a multi-role server, then define your CAS Array name and IP address, and set your CAS behind a load balancer (if needed). Add your external certificate to both the CAS and the load balancer (and the
    hub if you use TLS for mail transfer), and you should be golden.  Also, if you intend to proxy your CAS connections, here's a link that may help: 
    https://technet.microsoft.com/en-us/library/bb310763.aspx?f=255&MSPPError=-2147217396
    For completeness, here's a thread on the msexchange.org forums that specifically mentions adding Exchange into a second site: 
    http://forums.msexchange.org/New_Exchange_2010_at_another_Site/m_1800557445/tm.htm

  • Outlook 2011 w. Exchange 2010 - deliver mail to local inbox?

    Hi all. I have a problem with a MacbookPro (OSx 10.6.8, fully updated) and Outlook 2011 (14.2.5, fully updated) using an account on a Exchange 2010 server.
    Mails sent directly the users e-mail address, is delivered to a local Inbox and is therefore removed from the Exchange inbox. This is a problem, because the user is also accessing the mailbox from iPad and iPhone. There are no rules at all in the Outlook settings. The mail remains in the Exchange inbox until Outlook syncronizes folders. The strange part is that the user also recieves mails, sent to distribution lists, but these mails is not delivered to the local inbox, but stays in the Exchange Inbox.
    The mail in the Exchange inbox should stay there, until deleted by the user ...
    I have 40 other users using the same setup (MacBookPro, iPad, various SmartPhones) and they does not have this problem.
    Does anybody know what to do or do I have to reinstall Office 2011 (again, I might add ...)

    I found this and it worked for me too....
    Outlook 2011 Moving Exchange Messages To On My Computer
    Posted on April 8, 2011 by ccooper
    I had a problem where Outlook 2011 was moving sent and inbox messages from the Exchange folders to the inbox under On My Computer. The solution was to go to Tools -> Mailing List Manager and turn off the rule that must have been set by accident.
    If you simply open up the Mailing List Manager I noticed that it automatically creates a rule that matches your email address and then moves them to the Inbox On My Computer. I must have been going through the various menu options and hit return by mistake.

  • Exchange 2010\Outlook Mail issues

    Hi,
    I am having some issues with mail disappearing and outlook not updating. The issues are:
    When sending an email from Outlook it appears in the sent items for 30 seconds in Outlook and then disappears. It never shows up in OWA The email does send though. If an email is sent via OWA the email appears and stays in both OWA and Outlook. This is
    happening in Outlook 2010\Exchange 2010
    Updating issues on random folders in Outlook. This is happening on both Outlook 2013 and Outlook 2010 different users with the same Exchange 2010 back end. 
    Both users have cached email forced. I have tried rebuilding the mailbox locally.
    Cheers,
    Zac Avramides

    Hi,
    Thanks for your detailed information about the symptom.
    It seems the issue is more related to the Outlook client since OWA works fine. I suggest we can follow the checkpoints below:
    1. Rebuild Outlook profile.
    2. Disable any third-party firewall or AV programs.
    3. Run Windows in Clean Boot.
    4. Run Outlook in safe mode by “Outlook /safe”.
    What’s the result now?
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Forefront for Exchange 2010 - no mails in quarantine or incidents list

    I have a client with Forefront 2010 installed on their exchange 2010 server. I see 45 messages that have been blocked as spam in the dashboard - 43 connection, 1 smtp and 1 content.
    The client wants to know which messages are being blocked and which aren't, however when I open up the incidents and quarantine pages there is nothing there.
    They have the antispam configuration set to stamp headers and continue for SCL5 to 9 and it seems to me that things should be in the quarantine.
    I have all the logging options turned on and I've followed the other technet threads about this issue but none of those solutions seem to work on this machine.
    If anyone has any ideas I would really appreciate it!

    Hi,
    Firstly, please make sure if you have enabled the anti-spam filtering engine of FPE. If yes, please refer to the blog below:
    Exchange Content Filter settings are ignored
    Besides, please make sure you have installed all the released hotfix rollups for FPE. Please also make sure that you have enabled "Enable content filtering incident logging" in Advanced Options of Global settings.
    You can deliver quarantined items to specified recipients and set emial notification.
    In addition, only an Administrator can access/manage the quarantine of FPE.
    Please also ensure that you haven't configured FPE to automatically purge quarantined in a short time.
    FPE content filter uses the Cloudmark™ Antispam engine to analyze each e-mail message and stamp it with a SCL.
    When the setting 5 – 9 is selected, all messages with a rating of 5 or higher are treated as suspected spam. 
    Messages with an SCL rating of -1 and 0 will be treated as non-spam. You have the option to Quarantine or Stamp header and continue processing mail with an SCL rating in the 5 – 9 range.
    If the issue persists, you can adjust the SCL setting to a lower value to see if the issue persists.
    The links below would be helpful to you:
    Configuring content filtering
    Configuring e-mail notifications
    How to Manage Quarantined Files in Forefront Protection 2010 for Exchange Server
    (FPE)
    Best regards,
    Susie

  • Office 365 to Exchange 2010 Hybrid Mail Box Migration

    I'm working on setting up a pilot for Office 365. We have Exchange 2010 SP3, in a DAG configuration (two front end, and 2 mail box servers). I have setup the hybrid configuration. All firewall ports are open.
    Problem 1: We can move mail boxes up to office 365 with out a problem. When we try to move them back we get
    "[email protected]
    Status: Failed
    [email protected] Skipped item details
    Data migrated:  Migration rate:  Error: MigrationTransientException: The call to ‎'https://webmail.contoso.com/EWS/mrsproxy.svc City-ExchCAS1.contoso.local ‎(14.3.178.0 caps:05FFFF)‎‎' failed. Error
    details: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults ‎(either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)‎
    on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.. --> The call to ‎'https://webmail.contoso.com/EWS/mrsproxy.svc
    City-ExchCAS1.contoso.local ‎(14.3.178.0 caps:05FFFF)‎‎' failed. Error details: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults ‎(either from ServiceBehaviorAttribute
    or from the <serviceDebug> configuration behavior)‎ on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.. --> The
    server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults ‎(either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)‎ on the server
    in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs."
    I know someone is going to say "Trun on IncludeExceptionDetailInFaults", please tell me how to do that. I'm not an exchange expert, or an IIS expert.
    Problem 2: We can email to account in Office 365. Office 365 can't email to on-site exchange. We do have Mimecast as a spam filter, and I've been digging in that to see if that is a problem.
    Just looking to see if anyone has an idea of thing to check for this.

    Fixed
    1. Connect to the Office 365 Portal http://portal.microsoftonline.com 
    2. Click “Admin” in the upper left hand corner and go to “Exchange”
    3. Click “migration”
    4. Click “+” and then “Migrate from Exchange Online”
    5. Click “+” 
    6. Add the users that you need to move back to Exchange on site at Dedicated Computing
    7. Click “next”
    8. Click “next”
    9. Put any name for “*New migration batch name:”
    10. Put <your email domain> for “*Target delivery domain:”
    11. Put GUID of target database in for “*Target database:”
    Commands for Exchange Management PowerShell to find GUID
    i. Get-MailboxDatabase
    ii. Get-MailboxDatabase <insert database name from last command> |fl
    12. Click “next”
    13. Make sure both radio buttons for Automatically are check, and click “new”

  • Configure Exchange 2010 internal mail routing

    Hello,
    I’m have an Exchange server system which includes exchange 2003 standard edition server and an Exchange 2010 server standard edition server, plus a public SMTP server. Each exchange edition is on a separate machine. The SMTP server is on a separate machine.
    I am in the process of retiring the Exchange 2003 server per the following document:
    http://support.microsoft.com/kb/822931
    Inbound mail arrives at the SMTP server and is forwarded from there to the Exchange 2010 server. All user mailboxes have been moved to the Exchange 2010 server. There is a connector between the Exchange 2003 and Exchange 2010 servers. Both the Exchange 2003
    and Exchange 2010 server have a connector to the public SMTP server.
    In reviewing some of the log files, it appears that a lot of mail which originates from a user mailbox on the Exchange 2010 server is being sent from the 2010 server to the 2003 server and from there to the public SMTP server. I don’t know how to change
    this priority so that no mail will be sent to the Exchange 2003 server. At this point there is no reason for any mail to travel to or from the Exchange 2003 server. Any suggestions on how to change this configuration so that mail goes directly from the Exchange
    2010 server to the SMTP server?
    Thank you for taking the time to read and hopefully provide a response!

    Hi,
    From your description, I would like to clarify the following thing:
    If you have finished the migration successfully, and the Exchange server 2003 is unnecessary. You can remove the connector between Exchange 2003 to Exchange 2010 and the connector between Exchange 2003 to public SMTP server. And then the mail should go directly
    from Exchange 2010 to the SMTP server.
    Hope my clarification can be helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Lion, Exchange 2010. Mail loses all emails in an exchange account

    I am running Lion on an new 2.0 GHz i7.
    We are using Exchange 2010 SP1 and I have 2 exchange accounts setup in Mail. Every two weeks or so Iose all the emails in one of the accounts. After a few minutes Mail seems to realise, and startes resyncing all my emails. The mailbox is 2GB in size so this takes about an hour time during which Ihave no emails.
    Fortunatly so far this has only happened while I'm working in the office but if it happened while Iwas work off-site it could take a lot longer to sync
    The other exchange account has not had this problem.

    Since posting this Ihave archived my mailbox which has reduced it from 2GB to about 800 MB. I did have growlmail and dockstar addons running so I uninstalled them.
    It seemed ok for 4 days, and I installed herald which is a notification addon (hate the fact that mac mail doesn't have any kind of notification of new emails) and guess what the issue has occurred again.
    All emails dissappear and the whole mailbox has to re-sync.
    I'm getting really frustrated with this and am being forced to consider using Outlook Mac 2011, something Ireally don't want to do.
    Does apple actually look at these posts, can someone please help I really don't want to use Outlook

  • Exchange 2010 - Forwarding Mail

    We are looking to forward inbound mail for a couple of users  on our exchange 2010 server to an external address.  Will it take up any space on our local exchange store.
    Hank

    No if you setup to just redirect the mail but if you select to deliver to mailbox and forward then it will keep a copy and yes will take up the space.
    Create a contact for External address and set up the forwarding as per below article...
    Configure Mail Forwarding - http://technet.microsoft.com/en-us/library/dd351134(v=exchg.141).aspx

  • Exchange 2010 - Getting mail statistics

    Hi,
    Is there any way to get a figure on how many emails where sent\received internally using exchange 2010
    Regards

    Hi,
    Based on my research, except the above suggestion, we can also try using the “Log Parser” tool to filter the Message Tracking log:
    Advanced Exchange Transport Logs Troubleshooting using Log Parser - Part 1
    http://msexchangeteam.com/archive/2007/11/12/447515.aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange 2010 and mail adapter

    Hi,
    We have a scenario that PI picks xml from email attachment. Everything was okay until we had to change from exchange 2003 to 2010. I changed the IP and user settings from communication channel settings and got error message
    "exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state."
    Here is picture of current settings,
    https://docs.google.com/document/pub?id=1s3qufA6etZaTdAk0rE53qhW5URyO8-SG1Vfr3puQE1s
    User ID and PW on mail account has been checked and ok.
    Quick help is appreciated since documents are piling up...
    Best Regards,
    Pekka Pottonen

    Hello,
    Solved. 3 steps,
    1. Check and enable IMAP on mail server
    2. Allow autentication Plain on mail server.
    3. Change Finnish name for inbox from Saapuneet to Inbox.
    Regs,
    Pekka

  • Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

    Hello,
    I'm seeing an issue that started this past Monday with no recent change to our environment. 
    External Outlook Anywhere users and Mobile users, OWA users are unaffected.
    Internal Users are affected when using Outlook of any version, 2010 or 2013.
    -Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
    1 . Using Cached Mode:
    a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
    on the workstations.
    b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
    c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
    The outlook icon in the system tray says "Outlook is requesting data from the server":
    2. Using Non-cached mode 
    a. No Login Prompt at startup, business as usual
    b. Free/Busy, Out of Office works fine. Autodiscover is fine.
    c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
    d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
    Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random. 
    3. Lync Pop up  for credentials often, though entering the password.
    URLs are correct. Autodiscover, EWS, etc. 
    Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node. 
    Not sure what is going on.
    Josh

    You have a hybrid configuration with Office 365, right?  You didn't provide this valuable piece of information.
    In Exchange Online PowerShell run this command:
    Get-OrganizationConfig | FL PublicFoldersEnabled
    If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders.  Be sure that you have legacy pubic folder interoperability properly configured.
    http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Exchange 2010 - missing mails moved by rules / strange problem

    Hello,
    one of our users has a pretty strange problem.
    First of all, he has 12 rules (11 server-sided plus default for removing categories) and a HUGE folder-tree for about 1.5 years.
    His tree looks like:
    Inbox
    -A
    --1
    --2
    ---a
    ---b
    --3 Newsletter
    --4
    -B
    --1
    --2
    --3 Newsletter
    --4
    ...and so on for 192 folders
    Other Stuff
    -A
    --1
    --2
    ... and so on for 80 folders
    Since this week, he complains about missing mails.
    While investigating this problem, everything looks fine at first. Mails are stored to his mailbox successfully.
    Later we found out, that he has rules to move incoming mails to his "--3 Newsletter" folders depending on sender (and no further processing) and was looking for exactly those mails.
    But the mails were not visible in the target folder and neither in the inbox folder.
    Using the search function on inbox, I was not able to find the mails. After checking the box for all subfolders, the mail was found. Hovering the mail I was told, that it is in the target folder - where for sure it wasn't.
    Opening the mail from the search result and clicking on [File], "Inbox" was displayed as the current folder.
    After re-running the matching rule, the mails were visible in the target folder. This worked for yesterday. New mails were moved successfully.
    And today, we have the very same problem again. And again, I can quick-fix it by re-running the rules.
    As I can see and "fix" this on his machine and on my admin machine, this can't be any local problem.
    Any hints or solutions for that?
    Our Exchange version 14.3.123.4
    (Gosh, this input field is a huge pain in the ass! Why the hell does it automatically uppercase some words?)

    AdminDisplayVersion               : Version 14.3 (Build 123.4)
    Where can I see which RU this is?
    Outlook on his machine is configured with cache-mode, Outlook on my admin machine is configured for online-mode only
    The Rollup installed (if any) is not shown in EMC or EMS.
    See:
    Dude, where's my rollup?
    Martina Miskovic

  • Exchange 2010 - Dismount Mail Database on a DAG

    Hi All,
    I'm experiencing an issue in which 2 Mail Databases out of 3 within a DAG are not truncating the log files after a full backup, so for those 2 I currently have Circular Logging turned on.
    I spoke with an outside Exchange source that recommended trying to dismount the Mail Databases and bounce the Information Store on both Mailbox Servers.  To give it a "fresh start."
    Here's what was recommended:
    Get-MailboxDatabase -Server mbx* | dismount-Database
    get-service -computername mbx1 msexchangeIS | restart-service
    get-service -computername mbx2 msexchangeIS | restart-service
    Get-MailboxDatabase -Server mbx* | mount-Database
    I have to be honest.  I've never really had to dismount the Mail Databases in a DAG before.  Has anyone else - if so, does the above seem okay to you?
    Thanks,
    Mr Mister

    Hi,
    Agree with Andy. You can dismount a database in a mailbox server, a member of a DAG, which is similar as what you do for a mailbox server that is not a DAG member.
    Full and Incremental backups will truncate the transaction log files, please make sure your backup is one of these two types.
    If a server hosting the data being backed up is a member of a DAG, and this server hosts both active and passive database copies, we must disable the Microsoft Exchange Replication service VSS writer.
    So, please check if you have disabled the Exchange Replication VSS writer.
    Besides, to narrow down the issue that the transaction log files were not truncated after backup, I recommend you check the application log to see if there is any related events.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 - Move Mails between two Accounts

    Hello guys!
    I need ur help. I'm try to move an Mail from Exchange User A to Exchange User B on the iPhone.
    I tried the new "Apple Configurator" to create a new profile, with PreventMove "false", but it doesnt work. :-/
    Also checked the active directory and exchange policys but i didn't find any mistake in the config.
    1. Question: Is ist possible?
    2. How can i make the correct settings?
    3. Why is this function so complicated, Maybe apple can change something in the future.

    No.
    Abelimages wrote:
    Is it possible to move apps between to differently registered accounts?
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    Abelimages wrote:
    Getting a new imac. Will be setting up a new iTunes account on the imac.
    Why ?

Maybe you are looking for