Exchange 2010 move request failed with MapiExceptionCallFailed

hi
Attempting a local move request of Mailbox but it fails.
plz help
Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropFXDstCopyConfig [83]
    Lid: 27962   ROP: ropTellVersion [134]
    Lid: 27962   ROP: ropFXDstPutBufferEx [157]
    Lid: 17082   ROP Error: 0x48A    
    Lid: 31329 
    Lid: 21921   StoreEc: 0x48A    
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 1947    StoreEc: 0x48A    
    Lid: 1435    StoreEc: 0x48A    
    Lid: 1947    StoreEc: 0x48A    
    Lid: 1435    StoreEc: 0x48A    
    Lid: 1947    StoreEc: 0x48A    
    Lid: 4559    StoreEc: 0x48A    
    Lid: 21802 
    Lid: 19994   StoreEc: 0x48A    
    Lid: 20202 
    Lid: 3305    StoreEc: 0x48A    
    Lid: 32762   dwParam: 0x3FE70003
    Lid: 32762   dwParam: 0x361384B0
    Lid: 32762   dwParam: 0x36170003
    Lid: 32762   dwParam: 0x36DA0102
    Lid: 32762   dwParam: 0x36E00102
    Lid: 32762   dwParam: 0x3FD60040
    Lid: 32762   dwParam: 0x3FE4000B
    Lid: 32762   dwParam: 0x67590102
    Lid: 32762   dwParam: 0x675A0102
    Lid: 32762   dwParam: 0x30080040
    Lid: 32762   dwParam: 0x675C0102
    Lid: 32762   dwParam: 0x65E30102
    Lid: 32762   dwParam: 0x67510003
    Lid: 32762   dwParam: 0x672D0003
    Lid: 32762   dwParam: 0x673384B0
    Lid: 32762   dwParam: 0x673284B0
    Lid: 26346 
    Lid: 4073    StoreEc: 0x48A    
    Lid: 28570   StoreEc: 0x48A    
    Lid: 29738 
    Lid: 3401    StoreEc: 0x48A    
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849 
    Lid: 21817   ROP Failure: 0x48A    
    Lid: 22630 
Context:
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2362
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
OpCode: TransferBuffer
DataLength: 2362
 Any ideas?  any help much appreciated

What version of Exchange 2010?  SP2, RU #?   I saw this support article form MS for 2003 --> 2010
http://support.microsoft.com/kb/2579051.  Not sure if it is applicable.  It could be you need to go to RU4 for SP2 Exchange 2010.  Do not install RU5 as there were issues.
I've also run into several support articles about ACLs on the mailbox or fiolders:
http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
Let me know if I can provide any additional help.
JAUCG

Similar Messages

  • New Local Move Request fails with error "Multiple objects with Guid hex octet string were found."

    I can find nothing searching online.  Trying to move the last user mailbox from one server to another, but it fails with this error.  I have checked all mailboxes for the same GUID but can't locate it anywhere.  Anybody have some suggestions?

    Does anyone know if there is a way to perform a search based on mailbox GUID?  Maybe I could find all objects with the same and it could lead me in the right direction.
    Hi,
    To find the object that belongs to a GUID, you can refer to this blog.
    http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Exchange 2010 SP1 install fails with -1603 error

    I am getting a -1603 error when installing Exchange 2010 SP1.  Installation fails when copying files/removing old version with the following error:
    [10/01/2010 23:17:06.0823] [2] Beginning processing uninstall-MsiPackage -ProductCode:'6574fdc2-40fc-405a-9554-22d1ce15686b' -LogFile:'C:\ExchangeSetupLogs\InstallSearch.msilog'
    [10/01/2010 23:17:06.0847] [2] Removing MSI package with code '6574fdc2-40fc-405a-9554-22d1ce15686b'.
    [10/01/2010 23:17:09.0400] [2] [ERROR] Unexpected Error
    [10/01/2010 23:17:09.0401] [2] [ERROR] Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    [10/01/2010 23:17:09.0401] [2] [ERROR] Fatal error during installation
    [10/01/2010 23:17:09.0409] [2] Ending processing uninstall-MsiPackage
    [10/01/2010 23:17:09.0411] [1] The following 1 error(s) occurred during task execution:
    [10/01/2010 23:17:09.0412] [1] 0.  ErrorRecord: Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
    Does anyone know how to resolve this?
    Thanks,
    greg

    Hi Frank,
    I've the same problem when I try to install the SP2.
    When I try to install RU 4v2, 5 or 6, then comes error 2771. So I waiting for SP2 in the hope, a full install of the SP will fix this.
    But the setup broke with the following entries:
    [12.07.2011 19:51:59.0379] [0] Setup will run the task 'uninstall-msipackage'
    [12.07.2011 19:51:59.0379] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU''
    [12.07.2011 19:51:59.0379] [1] Die Active Directory-Sitzungseinstellungen für 'Uninstall-MsiPackage' lauten: Vollständige Gesamtstruktur anzeigen: 'True', Konfigurationsdomänencontroller: 'LicPDC.kh-lichtenstein.local', Bevorzugter globaler Katalog:
    'LicPDC.kh-lichtenstein.local', Bevorzugte Domänencontroller: '{ LicPDC.kh-lichtenstein.local }'
    [12.07.2011 19:51:59.0379] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU'
    [12.07.2011 19:51:59.0410] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Unexpected Error
    [12.07.2011 19:52:04.0551] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Schwerwiegender Fehler bei der Installation. Error code is 1603.
    [12.07.2011 19:52:04.0551] [1] [ERROR] Schwerwiegender Fehler bei der Installation
    [12.07.2011 19:52:04.0613] [1] Ending processing uninstall-msipackage
    The MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1' ist the SP1.
    Actual System: Server2008R2SP1 / Exchange2010SP1 RU3v3
    It is possible to solve this problem?
    Rene Hubert - Systemadministrator - DRK KH Lichtenstein gGmbH
    I too have this
    problem.

  • Access Exchange Service From SharePoint 2013 Custom Web part getting The request failed with HTTP status 401: Unauthorized.

    I want to Fill a drop down with Outlook Meeting of Current log-in user in SharePoint 2013 web part for default credentials I am using the following code
     ExchangeServiceBinding binding = new ExchangeServiceBinding();
                ServicePointManager.ServerCertificateValidationCallback = (sender, certificate, chain, sslPolicyErrors) => true;
                binding.RequestServerVersionValue = new RequestServerVersion();
                binding.RequestServerVersionValue.Version = ExchangeVersionType.Exchange2010_SP2;
                binding.PreAuthenticate = true;
                binding.UseDefaultCredentials = true;
                binding.Credentials = CredentialCache.DefaultCredentials ; 
                string server = "https://*********/ews/Exchange.asmx";
                binding.Url = server;
    I Am Getting the Error "The request failed with HTTP status 401: Unauthorized."
    but when I Replace  the line  
    binding.Credentials = CredentialCache.DefaultCredentials ; 
    with 
     binding.Credentials = new NetworkCredential(userName, password, domain);
    Its run fine.  Is there any way I could able to use default credential.
      

    Hi,
    As this question is more relate to Exchange development, I suggest you post it to the corresponding forum, you will get more help and confirmed answers from there.
    http://social.msdn.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    Best regards
    Patrick Liang
    TechNet Community Support

  • Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

    Hi,
    I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
    with HTTP status 404: Not Found."
    ================================================
    Event code: 3005 
    Event message: An unhandled exception has occurred. 
    Event time: 1/27/2015 5:56:10 PM 
    Event time (UTC): 1/27/2015 5:56:10 PM 
    Event ID: f7aedd39118845b79c17d3442a0d15a7 
    Event sequence: 54 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
        Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107 
        Trust level: Full 
        Application Virtual Path: /ESB.Portal 
        Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\ 
        Machine name: <Machine Name> 
    Process information: 
        Process ID: 4712 
        Process name: w3wp.exe 
        Account name: NT AUTHORITY\NETWORK SERVICE 
    Exception information: 
        Exception type: TargetInvocationException 
        Exception message: Exception has been thrown by the target of an invocation.
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    The request failed with HTTP status 404: Not Found.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
    575
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    553
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    46
    Request information: 
        Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx 
        Request path: /ESB.Portal/uddi/uddi.aspx 
        User host address: ::1 
        User: <domain>\<user>
        Is authenticated: True 
        Authentication Type: Negotiate 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
    Thread information: 
        Thread ID: 19 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
        Is impersonating: False 
        Stack trace:    at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Custom event details: 
    =================================
    Any idea why this is happening and what needs to be done ?
    PLEASE HELP
    Thanks & Regards
    Vikram

    Snippet from the link below:
    If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
    You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
    “%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
    Refer:
    https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
    Sarvanan's blog around this with detailed explanation:
    Configuring Exception Management Portal
    As mentioned above also
    Check Portal Configuration Settings
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Error http the request failed with http status 401: unauthorized

    Hi,<o:p></o:p>
    We are currently developing a Web Part for a
    dashboard that connects from SharePoint 2010 to Project Server, we are trying
    to connect via the PSI web service and fetch the project data but it is giving
    the same error "The request failed with HTTP
    status 401: Unauthorized". We are having a huge
    issue with gaining authorization through the PSI and cannot figure out what the
    problem is. We are using Project Server 2010, SharePoint 2010 and Visual Studio
    2010.<o:p></o:p>
    The person developing this has administrative
    rights on both servers and it is running on his account. However, this is his
    first experience with Project Server. Could some provide some guidance?<o:p></o:p>
    Does anyone have any suggestions?<o:p></o:p>
    Thanks,<o:p></o:p>
    Aba
    <o:p></o:p>

    Hi,
    Have the credentials been set for the web service? Or are you trying to pass the credentials of the user accessing the webpart? In the second case, the user must have permissions in project server
    It would be useful if you can share the part of the code that fails
    Paul

  • Record center - submit file soap call throwing The request failed with http status 401: Unauthorized" exception

    Hi, I am trying to implement custom hold order / send to in sharepoint 2010 to send files in to holds / record center.
    I am at the last step where I am trying submit the metadata using soap call- submit file
    [SoapDocumentMethod("http://schemas.microsoft.com/sharepoint/soap/recordsrepository/SubmitFile", RequestNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", ResponseNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", Use = SoapBindingUse.Literal, ParameterStyle = SoapParameterStyle.Wrapped)]
    public string SubmitFile([XmlElement(DataType = "base64Binary")] byte[] fileToSubmit, [XmlArrayItem(IsNullable = false)] Microsoft.SharePoint.RecordsRepositoryProperty[] properties, string recordRouting, string sourceUrl, string userName)
    return (string)base.Invoke("SubmitFile", new object[] { fileToSubmit, properties, recordRouting, sourceUrl, userName })[0];
    I am getting an error "The request failed with http status 401: Unauthorized".
    Actual file was transferred successfully but while transferring the properties (metadata) I am getting this exception.
    ganesh

    Hi ganesh,
    Please try to disable the loop back check, compare the result:
    In Registry Editor, locate and then click the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    Right-click Lsa, point to New, and then click DWORD Value.
    Type DisableLoopbackCheck, and then press ENTER.
    Right-click DisableLoopbackCheck, and then click Modify.
    In the Value data box, type 1, and then click OK.
    Quit Registry Editor, and then restart your computer.
    In addition, please check if these links are useful:
    http://www.sharepointpills.com/2011/10/send-sharepoint-2010-document-to.html
    http://www.codeproject.com/Articles/497729/UploadingplusDocumentsplusProgramaticallyplustoplu
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • "workflow.asmx" method The request failed with HTTP status 404: Not Found.

    When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
    1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
    2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
    3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
    Error details: {"The request failed with HTTP status 404: Not Found."} "   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
    asyncCall)\r\n   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n   at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
      at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n   at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n   at System.Threading.ExecutionContext.Run(ExecutionContext
    executionContext, ContextCallback callback, Object state)\r\n   at System.Threading.ThreadHelper.ThreadStart()"

    Hi,
    For a better troubleshooting, I suggest you to do as follows:
    1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
    2. On client side you can also access Workflow.asmx from IE to see if it returns error.
    3. Check the link below:
    http://www.mail-archive.com/[email protected]/msg02092.html
    If you want to operate the workflow in Client-Side,  we can use Client Object Model in SharePoint 2010 to achieve it.
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

    I have a web page that contains a ReportViewer control.  I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control.  I have set the ReportPath and ReportServerUrl correctly.  I am
    getting an error message.
    Am I suppose to use an .rdlc file rather than a .rdl file?  Does the web server configuration need to use a certain account?
     I am getting the following error message:
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    The request failed with HTTP status 404: Not Found.

    Hi bucaroov,
    The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
    Please follow these steps to solve the issue:
    Logon the Report Server machine.
    Open the Reporting Services Configuration Manager.
    Copy the Report Server URL from 'Web Services URL'.
    Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
    not available, could you please post the error message.
    Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
    For more information, please see:
    Walkthrough: Using the ReportViewer Control in Remote Mode:
    http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600 - The request failed with HTTP status 503: Service Unavailable

    Hi all,
    knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
    Situation:
    Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
    Second child domain also contains a SCCM SP1 server  (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
    WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
    Error:
    SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
    SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
    Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
    wsusutil checkhealth =>OK
    downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
    wsus admin console able to connect and configuration possible => OK
    IIS ports configured within SMS are equal to those configured for WSUS website
    SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
    wcm.log does report an error: (SCCM Log files at the end.)
    "The request failed with HTTP status 503: Service Unavailable"
    IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
    Questions:
    What else should I look at? (registyr, SUSDB content,..)
    What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
    And finally - Who does know the solution ?
    wcm.log:
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
    SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
    This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Local WSUS Server Proxy settings are correctly configured as Proxy Name  and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Local WSUS Server Proxy settings are correctly configured as Proxy Name  and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
    Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
    wsyncmgr.log (as a result of being not able to configure upstream server I guess):
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
    Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)

    I just experienced the exact same scenario.  After much digging I found that csakg6so posted a fix at
    Windoows-Noob
    Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
    Go to internet options
    Go to conections
    Go to LAN settings
    Uncheck all boxes
    The original post said to reboot, but that wasn't necessary for me.
    After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.

  • Problems connecting to SSRS using IReportServerCredentials, the request failed with http status 401: unauthorized

    We have a hosted SSRS server and we access it's reports using the reportviewer in an ASP.net application.
    We are getting the error: The request failed with HTTP status 401: Unauthorized. When trying to run one of the reports. I have confirmed that the login details work when logging into the report manager page directly.
    I have implemented an instance of IReportServerCredentials in a separate class (below) and I call it from the page before it tries to access the report. I'm not sure if this is all I need but can't seem to find any other info.
    I have managed to gain access connecting to the external server from my PC and accessed the report, but when I promote the code to production and run it from there on my local PC I get the unauthorized message again: the request failed with http status
    401: unauthorized
    The class:
    [Serializable]
    public sealed class MyReportServerCredentials :
    IReportServerCredentials
    public WindowsIdentity ImpersonationUser
    get
    // Use the default Windows user. Credentials will be
    // provided by the NetworkCredentials property.
    return null;
    public ICredentials NetworkCredentials
    get
    // Read the user information from the Web.config file.
    // By reading the information on demand instead of
    // storing it, the credentials will not be stored in
    // session, reducing the vulnerable surface area to the
    // Web.config file, which can be secured with an ACL.
    // User name
    string userName =
    ConfigurationManager.AppSettings
    ["MyReportViewerUser"];
    if (string.IsNullOrEmpty(userName))
    throw new Exception(
    "Missing user name from web.config file");
    // Password
    string password =
    ConfigurationManager.AppSettings
    ["MyReportViewerPassword"];
    if (string.IsNullOrEmpty(password))
    throw new Exception(
    "Missing password from web.config file");
    // Domain
    string domain =
    ConfigurationManager.AppSettings
    ["MyReportViewerDomain"];
    return new NetworkCredential(userName, password);
    public bool GetFormsCredentials(out Cookie authCookie,
    out string userName, out string password,
    out string authority)
    authCookie = null;
    userName = null;
    password = null;
    authority = null;
    // Not using form credentials
    return false;
    The call to the class, just before the report is run:
    if (GetConnection.GetConnectionString().ToString().Contains("IP of external server removed"))
    invoiceviewer.ServerReport.ReportServerCredentials = new MyReportServerCredentials();
    We have tried so many things here, we don't even care whether the server authenticates or not but it appears to be as standard. Our hosting company has also drawn a blank and changed so many settings to no ava

    Hi Nasa1999,
    According to your description, you are getting the error: The request failed with HTTP status 401: Unauthorized when you access the report using the ReportViewer in an ASP.net application.
    Regarding the 401 error, it could cause by the Service Principal Name(SPN) for the account the Reporting Services is running under hasn’t been registered when the Reporting Services is configured to use Kerberos authentication. So in your scenario,
    please check if you are using Kerberos authentication. If that is a case, please make sure SPN is configured correctly. For more information, please refer to the similar thread:
    The request failed with HTTP status 401: Unauthorized. in SSRS.
    If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles) around the time that the error message thrown out.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • "The request failed with HTTP status 401: Unauthorized"

    Hi,
    I'm trying to get both RSS feeds and SSRS reports on a web application which is having NTLM authentication without Kerberos. The catch is proxy setting, if I give <proxy autoDetect="false" /> in web.config of my sharepoint web
    application SSRS reports will be rendered in SQL Server Report viewer perfectly (I deploy using BIDS), but RSS viewer webpart will not display my internet feeds. If I give
    <proxy autoDetect="true" /> RSS feeds are displayed properly but SSRS report will throw the following error.
    The request failed with HTTP status 401: Unauthorized.
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [WebException: The request failed with HTTP status 401: Unauthorized.]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +412862
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
    Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.ListRenderingExtensions() +53
    Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.ListRenderingExtensions() +207
    Microsoft.Reporting.WebForms.ServerReport.ListRenderingExtensions() +130
    Microsoft.ReportingServices.SharePoint.UI.WebParts.ActionMenu.OnPreRender(EventArgs e) +180
    System.Web.UI.Control.PreRenderRecursiveInternal() +108
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
    I tried to work around this by adding proxy settings with bypass list.
    <system.net>
        <defaultProxy useDefaultCredentials="true">
          <proxy proxyaddress="http://<proxy IP address>:<port>" bypassonlocal="true" usesystemdefault="true" />
          <bypasslist>
      <add address="<my report server>" />
      <add address="http://<report server>:8080/reportserver/" /> 
      <add address="<IP of my report server>" />
          </bypasslist>
        </defaultProxy>
    </system.net>
    This makes RSS feed to work but SSRS throw the above error. I would need some advice from Microsoft on how to fix this.
    Note: My sharepoint site cannot be anonymous. I have just once service account that runs sql server service, report service, sharepoint services etc. This account is local admin on all servers, has highest access on sql box, run SSRS web service and app
    pools, etc.
    I have four servers, 2 WFE in windows load balanced, 1 app server (running Central admin and report service in sharepoint integrated mode), 1 db server hosting all content and config dbs and report server db.
    Regards,
    Manoj
    Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618

    Hi,
    Thanks to share your post.
    For the issue,
    do you mean that the error happen with the use of NTLM authentication without Kerberos? If yes, the possible cause should be the lacking of Kerberos.
     My suggestion is to implement the Kerberos authentication in your environment. You may check it and test it. For the detailed steps of implementing of the Kerberos:
    http://blogs.msdn.com/b/martinkearn/archive/2007/04/23/configuring-kerberos-for-sharepoint-2007-part-1-base-configuration-for-sharepoint.aspx.
    http://blogs.msdn.com/b/james_world/archive/2007/08/20/essential-guide-to-kerberos-in-sharepoint.aspx.
    Hope this could help you!
    Leo

  • The request failed with HTTP status 404: Not Found

    Hi
    BPC version we are using is : 5.0.502
    When we  Publish all reports using the steps below:
    a. Log into BPC Web
    b. Click on Available Interfaces> Select BPC for Administration
    c. Under Web Admin Task Click Publish Reports
    d. Select all of the reports and click the green check mark to publish the
    reports.
    I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
    Event Type:     Error
    Event Source:     OutlookSoft log
    Event Category:     None
    Event ID:     0
    Date:          12/8/2008
    Time:          11:26:42 AM
    User:          N/A
    Computer:     BPCAPP
    Description:
    ==============[System Error Tracing]==============
    [System  Name] : OSoftCPM
    [Message Type] : ErrorMessage
    [Job Name]     : AuditMgrService/SetAuditReportFiles
    [DateTime]     : 12/8/2008 11:26:42 AM
    [UserId]       : MMPlanning
    [Exception]
        DetailMsg  : {The request failed with HTTP status 404: Not Found.}
    ==============[System Error Tracing  End ]==============
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
    We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
    If anyone knows the resolution for the above issue, please help me.
    Thanks in advance
    Sajeev Abraham

    Hi
    Thanks for the response.
    Below are the full contents of the error message pop-up.
    ( System.Expection: the reguest failed with HTTP status 404:Not found at
    Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
    []args,sTRING[]paramnames, Boolen[]CopyBack)
    at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
    strApp,string strFiter)
    url is given below
    http://<HostName>/osoft/Admin/WebAdminMain.aspx
    BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
    Sql Reporting server is working.. I could connect using sql management studio.
    Thanks

  • 'System.Exception: The request failed with HTTP Status 404

    Hi
    BPC version we are using is : 5.0.502
    When we  Publish all reports using the steps below:
    a. Log into BPC Web
    b. Click on Available Interfaces> Select BPC for Administration
    c. Under Web Admin Task Click Publish Reports
    d. Select all of the reports and click the green check mark to publish the
    reports.
    I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Below are the event log relation to this error.
    Event Type:     Error
    Event Source:     OutlookSoft log
    Event Category:     None
    Event ID:     0
    Date:          12/8/2008
    Time:          11:26:42 AM
    User:          N/A
    Computer:     BPCAPP
    Description:
    ==============[System Error Tracing]==============
    [System  Name] : OSoftCPM
    [Message Type] : ErrorMessage
    [Job Name]     : AuditMgrService/SetAuditReportFiles
    [DateTime]     : 12/8/2008 11:26:42 AM
    [UserId]       : MMPlanning
    [Exception]
        DetailMsg  : {The request failed with HTTP status 404: Not Found.}
    ==============[System Error Tracing  End ]==============
    We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
    If anyone knows the resolution for the above issue, please help me.
    Thanks in advance
    Sajeev Abraham

    Hi,
    This forum is for BI Integrated planning an BW/SEM BPS. For BPC related questions please post this message in the forum for Enterprise Performance Management (Enterprise Performance Management (SAP EPM)).
    Best regards,
    Gerd Schoeffl,
    SAP NetWeaver RIG BI

  • "The request failed with HTTP Status 400: Bad Request." when running reports

    Hi,
    I installed reporting services and the install went fine.  The Reporting Services are located on a different server.  I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
    System.Net.WebException
    The request failed with HTTP status 400: Bad Request.
    Stack Trace:
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available.  If no options are availble the report just doesn't run,  I don't get and error if I select "View Report" mutiple
    times.
    If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
    One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
    Thanks

    I reviewed the topic and found a couple of steps I missed the first time around.  I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission. 
    I then uninstalled the role and reinstalled it.  I am still getting the 400 error.
    When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log).  I couldn't find anything specific related to it.  By reading a few "related" Internet posts I came accross a intial setup
    blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result.  I turned them off again. 
    Here is the tail end of the SmsAdminUI.log
    [19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementBaseObject.get_wbemObject()
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
       at System.Management.ManagementBaseObject.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Error retrieving object FileType=2";
     ErrorCode = 2151811598;
     File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
     Line = 1208;
     Operation = "GetObject";
     ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
     ProviderName = "ExtnProv";
     StatusCode = 2147749890;
    \r\n
    [1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
       at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
    [1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementBaseObject.get_wbemObject()
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
       at System.Management.ManagementBaseObject.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Error retrieving object FileType=2";
     ErrorCode = 2151811598;
     File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
     Line = 1208;
     Operation = "GetObject";
     ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
     ProviderName = "ExtnProv";
     StatusCode = 2147749890;
    \r\n

Maybe you are looking for

  • Question about changing a Snow Leopard Server network settings

    We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever. Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve ha

  • Maxtor Personal Storage 3200 ext. HD. Yea or Nay

    I saw the ad for a large office supply store and they had this drive for $69 over this weekend. I went Maxtor's website and they showed no Mac compatibility. I wondered why, so I dropped tech support a line. This is the response I got, it includes so

  • VAT report for Finland

    Hello, There is no separate VAT report for Finland in SAP. Should the standard one (S_ALR_87012357) be used? Thanks!

  • Working with HTTP-POST Submit Button

    I've created a form that uses a submit button with HTTP-POST.   I've tested this against a script that displays the fields, however, I'd like to table the posted data to SQL.   Can someone show me some code to parse this data with CGI, or PHP?

  • Error starting X

    Hi, I have an ASUS X53TA notebook with dual GPU when I try to execute startx I have some blocking errors: [ 1753.842] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 1753.843] X Protocol Version 11, Revision 0 [ 1753.843] Build Operating System: Lin