Exchange 2010 - Moving mailbox database from exchange 2010 server to another exchange 2010 server

Hi,
I have a current existing exchange server running on 2008 R2. apparently the partition that holds the mailbox database is getting full and i need to move some user mailboxes to another environment ( exchange 2010 running on 2008 R2). i transferred some users
successfully to the new location, but am not able to transfer the rest. I am getting the errors:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
Erastus XXXXX
Failed
Error:
The queue in 'MBX2010_STAFF' database already contains a move request for 'Erastus XXXXX', while AD reports the mailbox as not being moved. It is possible that someone created this move request recently, while targeting a different domain controller, and AD
replication did not yet occur. You can examine this move request by running 'Get-MoveRequestStatistics -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5 -IncludeReport | fl'. If you believe this to be an abandoned move request,
you can remove it by running 'Remove-MoveRequest -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5'.
Exchange Management Shell command attempted:
'xxxxxxxx.co.ke/Training Department/XXXXXXX/XXXXXXX/Erastus XXXXX' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
Elapsed Time: 00:00:00
AND
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
George XXXXX
Failed
Error:
Service 'net.tcp://win-u5bjh2oamaa.xxxxxxxxx.co.ke/Microsoft.Exchange.MailboxReplicationService' encountered an exception. Error: MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=207]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Exception details: MapiExceptionNoAccess (80070005): MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=207]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Exchange Management Shell command attempted:
'xxxxxxxxxx.co.ke/Training Department/xxxxxx/xxxxxxx/George xxxxxxx' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
Elapsed Time: 00:00:01
I have all the proper rights.
YOUR ASSISTANCE WILL BE HIGHLY APPRECIATED. THANX :)

0x80070005 is pretty standard access denied entries. I would start digging into ACLs on a handful
of mailboxes.
Is there another Admin that can give it a shot to test their permissions vs yours?
- If you find my post to be helpful, or the answer, please mark it appropriately. Thank you.
Chris Ream

Similar Messages

Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation!

Moving CMS database from one server to another

Using the following:
Crystal Enterprise 10, installed on W2K3 Server R2 (not making any changes to this server);
CMS database, installed on W2K Server, SQL Server 2000, SP3
New database server: W2K3 Server R2, SQL Server 2005, SP2
I found what I think are the steps to moving the database from one place to another in the CE10 Administrator's guide (pages 291-300, but I want to make sure there aren't any "gotchas" when moving the database location and/or upgrading the database version. I'm primarily a DBA, so I already know about the Schema security change going from SQL 2000 to SQL 2005.
In a nutshell, here's my plan:
1. Take fresh backup of the existing CMS database
2. Stop Crystal Management Server
3. Click "Specify CMS Data Source" on the toolbar.
4. ETC--following the steps in the admin guide
If anyone has done this and has run into any problems (what I'm expecting) or had it go smoothly (I would be surprised), please let me know what to expect.
Thanks!

All you really need to do is stop the crystal services.
Backup the CMS and Auditing database
Detach the CMS and Auditing database
Copy CMS and Auditing databases to new DB server
Attach the CMS and Auditing databases
Set the compatibility mode
On the servers/s that host the CMS service, modify the ODBC connections to point to the new database server
Start the CMS service, fire up the Crystal services.
One thing to note, I don't think SQL 2005 is a supported platform for CE10 - this doesn't mean it won't work and since the support lifecycle for the product is long gone it doesn't really make much difference however you may want to run some thorough testing prior to the move.
Edited by: James Pretorius (CCLTD) on Aug 5, 2009 9:20 PM

Impact of moving a user from one organisational unit to another.

Hi
my system description :
extended classic
srm 5.00
I am new to srm and i would have some questions about the impact of moving a user from one organisational unit to another.
The senario is that:
I have moved a user from organisational unit X to Y lets say different purchasing organisation
The user had PO created in organisational unit X waiting for goods receipt but even if he is now in organisational unit Y he can still create the good receipt for the PO created in organisational unit X .
Is it ok?
Futhermore not only can he create good receipt but the good receipt take the cost center assigned in organisational unit Y whereas the PO has the cost center of organisation X.
I believe that is how the confirmation works in SRM. However is there a way for it to take account assignment from the PO instead of where the user is situated in the org hierarchy when doing confirmation.
Thanks

Thanks for your answers
Maybe i should explain how the user was moved.
I did not used users_gen because i didn't want the user's partner ID to be changed. If the partner ID is changed then the user would not be able to access PO from old Organisation Unit. (can somebody confirm this please)
I did right click on the wanted Organisation Unit then assign the user. The problem is that the relationship between the user partner ID and the new organisation unit was not maintained and the user could not create shopping cart in the new organisation unit.
To solve this issue oss note 1041701 was implemented and the issue was solved.
But before the the implementation of oss note 1041701, if the user had open items from old organisational unit he could not access PO thus could not confirm goods receipt when moved in new organisation unit.
Now this is possible he can confirm goods from old unit but the confirmation is done using cost centre of user instead of the cost centre of the PO.
Jagadish you said that the confirmation must be done using PO accounting details not the user attributes. Then i think i have a problem in my system.
regards,
yannick.

What is the Exchange 2010 maximum mailbox database size that is support by MS in a single DAG environment?

My Exchange setup:
Exchange 2010 Enterprise
2 mailbox servers
2 CAS, 2 HT
12 mailbox databases. The total of all databases combine is about 2TB. The largest mailbox databases are 530GB, 250GB, and 196GB. Are this over the supported recommendations?
bl

2TB, look at the second article but best practice 200GB or less
http://social.technet.microsoft.com/Forums/exchange/en-US/48431bab-4049-47db-9a84-359d5123d247/what-is-the-maximum-supported-database-size-in-exchange-2010-
http://social.technet.microsoft.com/Forums/exchange/en-US/f96892b3-8e2d-4eef-b64a-4cbc0097396d/ideal-size-for-exchange-mailbox-database

Exchange 2010 cross mailbox database search

Hi there,
I have a customer who has an interesting scenario. They have an exchange 2010 server with 3 mailbox databases. They want to do a search for a text string across all databases which is reasonably straight forward but they also want to take that search back
in time and do a search across the databases as they were at points in time in the past (1 year and 2 years ago). They have backups to recover and we are thinking that we can recover the databases at the points in time required but we're unsure whether the
search works across recovered databases.
Does anyone have any thoughts on this or advise on how this might be achieved?
Thanks,
Rich

Assuming you're aware of the concepts surrounding Microsoft's recommendation to use Exchange Native Data Protection, and you're needing to search beyond what is currently protected. Otherwise, just use that.
https://technet.microsoft.com/en-us/library/dd876874(v=exchg.150).aspx#ENDP
So here's the issue with your request: Exchange Search uses the indexes, which would either need to be restored or re-built after a restore. so you'd need to do your search, and repeatedly mount restored databases, probably in an isolated environment
since i'd assume you'll want to reattach restored mailboxes to existing users, ensuring the index is in good shape and re-do your search. Sounds like a huge PITA. Does your backup software offer the functionality you're looking for? Microsoft's
DPM software only offers per-mailbox restores, but perhaps you've got something more sophisticated.
This is all complicated, which is why Microsoft recommends to use NDP.
Mike Crowley | MVP
My Blog --
Baseline Technologies

Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

Hi,
I want to upgrade my SQL from 2008 R2 to SQL 2012.
FIM Databases
1) FIMService Database
2) FIMSynchronizationService Database
Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
2012
Activity I want to perform : Create a fresh Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

Hi Shivam,
Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
In the table you have tasks to upgrade SQL for FIMService and FIMSych.
FIM Service:
Upgrade FIM Service servers to FIM 2010 R2 SP1
Stop FIM Service on all servers
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Service on all servers
FIM Synch:
Upgrade FIM Sync to FIM 2010 R2 SP1
Stop FIM Sync
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Sync
If you are not making in-place upgrade, I would do something like here:
Stop FIM Services
Backup the databases at SQL 2008
Restore backed up databases on SQL 2012
Make sure SQL Agent Jobs are moved (FIMService)
Make sure Broker is enabled on FIMService database
On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Exchange 2013: This mailbox database is associated with one or more active mailboximport / Cannot uninstall exchange

We have a corrupted installation of Exchange 2013 due to installating CU6
New Exchange server is already installed and mailboxes are migrated over, I am now in the process to uninstall the old exchange 2013 so we can decomission it but I get this error when I try to run uninstall
"This mailbox database is associated with one or more active mailbox import,To get a list of all Mailboximport request associated with this database, run Get MailboxImportRequest | ?{ $_.RequestQueue -eq "<Database ID>"}....
But when i run this command I get an error of" The Get-MailboxImportRequest is not recognized as a cmdlet...
Any advise is appreciated
Thanks.

Hi ,
From the error message i came to know few things i have mentioned mentioned below .
If you want to remove the problematic exchange server , you need to remove the existing mailbox import requests.
For that you should need to have the required permission for the user account from which you are trying to execute the command
Just check your user account is having the Mailbox Import Export role permissions .
If you have the required permissions then go ahead and execute the commands
Get-MailboxImportRequest | ft -au ( this is to see how many no of the mailbox import request are available
Remove-MailboxImportRequest
( this command is to remove the entire mailbox import move request)
Once you have done with that , then you start proceeding uninstalling the exchange server .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Exchange Connector - Update Mailbox Database Failed

Hi everyone,
OIM : 11g R2
Exchange : 11.1.1.6
I want to update "mailbox database" attribute of an exchange user.
I can make provisioning successfully.
When I update "Mailbox Database", "Database Updated " failed.
In log :
SEVERE: oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : doUpdate : Error while updating user
java.lang.IllegalArgumentException: Update type [Database] not supported
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:274)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:271)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$ThrowableHandler.deserialize(CommonObjectHandlers.java:115)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObjectField(BinaryObjectDecoder.java:417)
    at org.identityconnectors.framework.impl.serializer.MessageHandlers$5.deserialize(MessageHandlers.java:155)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.api.remote.RemoteFrameworkConnection.readObject(RemoteFrameworkConnection.java:153)
    at org.identityconnectors.framework.impl.api.remote.RemoteOperationInvocationHandler.invoke(RemoteOperationInvocationHandler.java:101)
    at $Proxy519.update(Unknown Source)
In Process Definition of Exchange User target resources, there is a "Database Updated" task.
If this task is exist, database must be updated.
Why I can not update mailbox database?
Thanks.
Best regards.

Thank you Alex. As I was firing up the shell to test this out I realized I was using the wrong account! Poor naming convention it seems =)
Appreciate the help.

Exchange 2013 CU2 - Mailbox Databases and Active Sync - update when new item arrive

Hi,
Maybe it will be a silly question but I don't know what exactly is going on. We are running Ex2013CU2 Evironment (1 CAS, 2 MBX Servers with 4 Mailbox Databases).
User mailboxes are in MDB01 and they are allowed to connect to mail via activesync and everything is working great (I mean that auto notification on mobile when item arrive is working).
When we move user mailbox to another database ex. MDB02 -> "auto notification when item arrive" does not working, but manual synchronization is working great.
Does anyone have any idea why it is behaving like this or what should I check to fix this ?
Thanks.
-- Kamil Tatar

are you saying PUSHMAIL is not working after moving the mailbox to a different database?
Where Technology Meets Talent

How do you assign a user or group FULL access to all Exchange 2013 DAG mailbox databases?

How do you assign a group or user FULL mailbox access rights to ALL mailboxes in the Organization or DAG mailbox databases?
Commands I've tried with no avail:
get-mailboxdatabase -server “exch01″ | add-adpermission -user “domain admins” -AccessRights GenericAll
get-mailboxdatabase -identity "DAG database" | add-adpermission -user "user" -accessrights FullAccess
Please let me know if you can help! Thanks.

Get-Mailbox | Add-MailboxPermission -Identity UserMailbox -User "Domain\Group" -AccessRights FullAccess - worked for me! Thanks again!

Moving oracle database from Solaris 10 to 9

Hi all,
Good day,
I am looknig for perfect steps on moving an oracle database from one server to another server.
Below are the details,
From:
SunOS sacsun134 5.10 Generic_142909-17 sun4u sparc SUNW,SPARC-Enterprise [Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit]
To:
SunOS sacsun120 5.9 Generic_122300-54 sun4u sparc SUNW,Sun-Fire-V890 [Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit]
Any metalink ID would also be helpful.
Many Thanks...

To clone your ORACLE_HOME binaries, see 300062.1 (How To Clone An Existing RDBMS Installation Using OUI).
To clone your database, see 458450.1 (Steps to Manually Clone a Database)
To re-link the ORACLE_HOME binaries (because of the OS change), see 444595.1 (Is It Necessary To Relink Oracle Following OS Upgrade?)
HTH
Srini

Moving portal database from NT to HP-UX

I am moving an existing 9iAS portal database from NT to HP-UX. 9iAS was already installed on HP-UX and is being used for a forms server and reports server. Do I need to do anything else but simply create a new database and export from NT and import onto HP?

Hi,
You can make use of the Heterogeneous System copy tool available on SMP for this purpose. You will also find a pdf guide for the same.
Cheers!!

Sharepoint 2010 - Archiving the files from one document library to another document library in sharepoint site

I have a requirement to move the documents from one document library to another document library.
Source Library - DocumentLib
Destination Library - Archive
Archive document library will have folders by fiscal year.
Source documentlibrary has files from year 2012 till date.
Archive folder will have folders by fiscal year -(fiscal year starts from July1st -June 30th )
If the document is created date between 1st July 2012 -June 2013 then move the document to Archive document library and in folder Fiscal Year 2013.
If the document is created date between 1st July 2013 -June 2014 then move the document to Archive document library and in folder Fiscal Year 2014.
The structure of destination document library folder should be same as source document library.
Please find attached the screenshot of the requirement.
Files Type - Excel,pdf,microsoft outlook item
Could we use Sharepoint designer workflow to achive this task?
Any help on this will be appreaciated.

Hi Asritha,
According to your description, you want to create a workflow to meet the need.
Per my knowledge, there is no built-in action which can move the documents from the current library to a folder in another library.
I recommend to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps below to deploy the custom activity to SharePoint:
Download the activity form http://spdactivities.codeplex.com/
Open Dos command prompt.
Browse to the directory that you can access stsadm.exe. The default location in version 3.0 is C:\Program Files\Common Files\Microsoft Shared\web server extensions\14\bin
Type the stsadm commands: stsadm -o addsolution -filename C:\UsefulSPDWorkflowActivities_0.5.0\DP.Sharepoint.Workflow.wsp (“C:\UsefulSPDWorkflowActivities_0.5.0\” is the file path)
Type the stsadm commands: stsadm -o deploysolution -name DP.Sharepoint.Workflow.wsp -allowgacdeployment -force -immediate
Open the Center Administration, Click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to the Web Application.
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a workflow associated with the Source Library DocumentLib and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: Created is greater than 7/1/2012.
Select If current item field equals value, change the settings to be If Current Item: Created is less than 6/30/2013.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at Fiscal Year 2013 folder url.
Select Delete Item, change the settings to be Delete Item in Current Item.
Select If current item field equals value, change the settings to be If Current Item: Created is greater than 7/1/2013.
Select If current item field equals value, change the settings to be If Current Item: Created is less than 6/30/2014.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at Fiscal Year 2014 folder url.
Select Delete Item, change the settings to be Delete Item in Current Item.
Publish the workflow.
Best regards.
Thanks

Moving LR files from one external drive to another

How do I move LR image files from one external drive to another external drive?

Move the photos using your operating system and then re-connect in Lightroom following these instructions: Adobe Lightroom - Find moved or missing files and folders
Do not use this as an opportunity to re-arrange folders or move photos from folder to folder. Just move the entire "tree" of folders.

Exchange 2010 - Moving mailbox database from exchange 2010 server to another exchange 2010 server

Similar Messages

Maybe you are looking for