Exchange 2010 Org Health check telling me I need Enterprise CALs, bug?

My new install of Exchange 2010 Enterprise organizational health check is telling me I also need Enterprise CALs for all of my test users. This does not seem right since I have not enabled any features listed as ecal features at http://www.microsoft.com/exchange/en-us/licensing-exchange-server-email.aspx#Exchange2010CAL
in fact the setup is a very basic one. The test users were migrated from an existing exchange 2007 server but again no enterprise features were enabled there. Is there a way to tell what it thinks I need enterprise CALs for? Is this a bug? I saw a notice that
the RTM version had counted the default exchange active sync policy as an ecal requirement but I figured this would have been fixed by now.

looks like it has reared its head in update rollup 8-v2 for sp3. Last year I was playing around with the archive mailbox to see if it was something we may want to implement. At the time our enterprise cal requirements went from 0 to 1 for the test system
I was using. This ended up being something we did not want to pursue at the time so I disabled the option on the account. Happened to run the organizational health link today and now it says that all accounts need enterprise cals. Did not appear to be an issue
in update 7.

Similar Messages

Exchange 2013 Daily Health Check Script

Hi All,
I recently migrated from Exchange 2010 to Exchange 2013. Prior to the migration the daily health check was being used daily to send my team and I the HTML report.
I have downloaded the new v1.07 script and followed the same rules and settings I used for Exchange 2010 when setting up the script.
The script only runs now via Exchange shell and does not send the HTML report and I am unable to run the script via a batch file that called the ./ps1 file in a windows command prompt and am also unable to as a result, use the task scheduler to schedule
this task.
I am desperately in need of getting this morning report as its been so useful, I cant do without it now.
Any advise would be greatly appreciated.
Thanks so much
Alton

So, could you please check this link, it provide the solution to check the daily health of exchange 2013 :
http://exchangeserverpro.com/troubleshooting-exchange-server-2013-with-test-cmdlets/

Error in uninstall Exchange 2003 after Exchange 2010 migration.

Setup encountered an error while checking prerequisites for component "Microsoft Exchange": 0X80072030 (8240): There is no such object on the server. I searched about the error and most of the hit is referring to postmaster account point
to the old server and that doesn't apply to our environment.
http://support.microsoft.com/kb/283089
below is the errors from the setup log. Other users had reported this problem but didn't find any solution other than manually uninstall the last Exchange 2003 server.  The problem is I couldn't find any official KB for manually
remove legacy Exchange server from Exchange 2010 org, bb288905 or kb833396 do not provide enough information. So is my only choice is to call Microsoft Support?
thanks
[22:38:41] Entering ScConstructAddressListServiceDNAndCN
[22:38:41] Leaving ScConstructAddressListServiceDNAndCN
[22:38:41] === IGNORING PREVIOUS ERRORS === ScPRQ_ServerGroupsHaveNotBeenMovedOrRenamed (f:\titanium\admin\src\udog\excommon\prereq.cxx:8080)
           The operation has completed successfully.
[22:38:41] Entering CCompDomainPrep::ScGetEffectiveMode
[22:38:41] Leaving CCompDomainPrep::ScGetEffectiveMode
[22:38:41] Entering ScDetermineIfLocalDomainServerGroupHasAlreadyBeenACLedOnExchangeCT
[22:38:41] Using cached result for domain "/dc=org/dc=cityofwpg/dc=ad"
[22:38:41] The required permissions have already been set
[22:38:41] Leaving ScDetermineIfLocalDomainServerGroupHasAlreadyBeenACLedOnExchangeCT
[22:38:41] Attempting to create the SRS DOB [checking whether SRS is installed].
[22:38:41] Entering ScFindRoutingGroupThatContainsServer
[22:38:41] Leaving ScFindRoutingGroupThatContainsServer
[22:38:41] Entering ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[22:38:41] This prerequisite has PASSED -- ID:62235 --
[22:38:41] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[22:38:41] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
           Error code 0X80072030 (8240): There is no such object on the server.
[22:38:41] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
           Error code 0X80072030 (8240): There is no such object on the server.
[22:38:41] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
           Error code 0X80072030 (8240): There is no such object on the server.
[22:38:41] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): There is no such object on the server.
[22:38:41] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): There is no such object on the server.
[22:38:41] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
           The operation has completed successfully.
[22:38:41] Setup encountered an error while checking prerequisites for the component "Microsoft Exchange":
0X80072030 (8240): There is no such object on the server.
[22:43:09] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
           Error code 0X80004002 (16386): No interface.

Did you also check for other accounts, i.e. non-postmaster?
Setup will check to make sure that there are no mailboxes homed onto this server.    This attribute homeMDB could still be set for a mailbox that has the Exchange attributes remove. Seen that before when people set attributes directly
via scripts.....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Yes, I did. Nothing has MDB = the legacy server.    The error from setup log seems to suggest a different problem.

Exchange 2007 and exchange 2010 Federation

Hi all I am trying to federate between Three organisations
org A exchange 2007 with exchange 2010 cas
org B exchange 2010.
org C exchange 2010.
I cannot share my calendar from org A to Org B
I can share Org B to Org A and Org B to Org C.
when I try from Org A to Org B or Org C
When I try to share free/busy fro the exchange 2007 with exchange 2010 cas. The user gets an error
"calendar sharing is not available with the following entries because of permission settings on your network."
-availabilityaddressspace. Autodiscover works TXT works. I have added a user from Org B as a contact in exchange.
The exchange 2010 server is not the CAS server for the exchange environment and I is not a proxy for exchange 2007. Is this where I am failing ?
Heeeelp

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 not delivering mails to Exchange 2010

I am upgrading exchange 2010 to exchange 2013 and currently in coexistence. I cutover the mx to deliver mail to 2013 cas VIP last night and no mail was being received by the 2010 mailboxes, it was all being queued on the 2013 mailbox servers (mailbox
and cas servers are separate in this deployment.) There are only a few 2013 mailboxes as I have not yet started migrating them. These 2013 internal mailboxes can not send to exchange 2010 either, but 2010 can send to 2013. 2013 to 2013 mail works
fine. I have read somewhere about an issue with a receive connector having the same ip range that includes the mailbox servers, but I'm not clear on really which mailbox servers it is alluding to.
All the exchange 2010 servers are all on the 10.1.1.* network. Exchange 2013 CAS servers are all on the 10.1.1.* network and the 3 exchange mailbox servers are on 10.1.1.*, 10.1.2.* and 10.30.5.*. Only 1 AD site. On one of the 2010 receive
connectors there is a scope of 10.1.1.0/24 I'm wondering if this is the culprit and by removing it should fix the problem. Any other ideas would be appreciated.

Exchange 2013 users are unable to send emails to exchange 2010 users then check your connectors on Exchange 2013 Mailbox server. and yes if you have overlapping of scopes in different connectors then this can happen.
Kindly mark this as answer if found helpful. Thanks.
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

Uninstall Forefront for Exchange 2010

I have acquired another spam filter appliance that will used instead of Forefront for Exchange 2010.
How do I uninstall Forefront for Exchange 2010 without any issues while still using Exchange 2010.
Basically the email will go through the email appliance filter then to Exchange. I want to deactivate or uninstall Forefront for Exchange with impacting my email services. Is it as simple as just uninstalling it?

Hi,
About uninstalling Forefront for Exchange 2010, you could check the following article.
If spam filtering was enabled, the configurations in the corresponding antispam settings in Microsoft Exchange that were leveraged by FPE will be retained by their Exchange antispam counterparts after FPE is uninstalled. These settings include: Connection
Filtering, Sender ID Filtering, Sender Filtering, and Reciepient Filtering. To change these configuration settings you will need to modify them through the Exchange management console.
Uninstalling Forefront Protection 2010 for Exchange Server
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Move mailbox from exchange 2010 2003 , Transient error MapiExceptionLogonFailed has occurred.

We are currently migrating from Exchange 2003 to Exchange 2010, same domain.
We have successfully moved some mailboxes from exchange 2003 to exchange 2010 without any problems.
Now we need to move 1 mailbox back from exchange 2010 to exchange 2003.
After creating the moverequest it stucks on 0% and the log shows the error below.
After using Bing I found this post -> http://social.technet.microsoft.com/Forums/exchange/en-US/ef41ae05-8816-4c0c-968a-c48f0e3d50b5/move-mailbox-back-from-exchange-2010-to-exchange-2003-failure?forum=exchangesvrdeploylegacy
This suggest ->
After I give FULL permissions to each Mailbox Stores on Exchange 2003 server, I was able to move my mailbox back onto the Exchange 2003 server. In details:
Simply right click Storage Group\Mailbox Store and go to Security, in there you may see Exchange Servers group already there, if no add it in, then give it FULL permissions! and thats it!
Create a new move request but still stuck on 0% and error as below
20-3-2014 16:32:10 [ex2010p11] 'contoso.com/Users/exadmin' created move request.
20-3-2014 16:32:11 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'exchangep21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:11 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:11 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:11 [ex2010p21] Request processing started.
20-3-2014 16:32:11 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (1/60).
Error details: MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: ex2003
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 56583
Lid: 52487 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo,
WindowsIdentity windowsIdentity, String applicationId)
at Microsoft.Exchange.MailboxReplicationService.MapiUtils.OpenSystemMailbox(Guid mdbGuid, String serverDN, String dcName, NetworkCredential cred, String& systemMailboxDn)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.OpenSystemMailbox()
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.ClearSyncState()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<>c__DisplayClass23.<CleanupOrphanedDestinationMailbox>b__22(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CleanupOrphanedDestinationMailbox(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)
Key: F2FA63B0116C564EA4C598D69786443D9E4FB582FF27D2449142F949D567E1E7E0CA914F6695624C98892FA527AAA91E
SyncStateLength: 0
20-3-2014 16:32:41 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'ex2010p21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:41 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:41 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:41 [ex2010p21] Request processing started.
20-3-2014 16:32:41 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (2/60).

Hello，
When you move mailbox from exchange 2010 to exchange 2003, please check if the following situations exist:
http://technet.microsoft.com/en-us/library/dd638157(v=exchg.141).aspx
Before you move mailbox again, please clear the previous move request.
I recommend you use EXBPA to check your exchange server 2003 and exchange 2010.
Please check if inheritable permission is missing on the mailbox store on Exchange Server 2003.
Cara Chen
TechNet Community Support

Outlook client requirements and Exchange 2010/2013 coexistence

Good morning!
A question regarding Exchange 2010/2013 coexistence and the Outlook client requirement. I am upgrading and about to install Exhange 2013 into an existing Exchange 2010 Org. The current 2010 Org is patched to SP-3 and Outlook Anywhere is currently disabled.
I have Outlook clients that do not yet meet the minimun requirements for 2013 (Outlook 2007/2010). When I install my first 2013 server will it effect the current downlevel clients? The mailboxes are still in 2010 so my thoughts were since the Office upgrade
including Outlook has not yet taken place I didn't want to wait for them to at least get 2013 into the Org. The 2013 server should effect the clients until I configure the CAS on 2013 and only when they are at the proper version, is this correct? Does Outlook
Anywhere need to be first enabled and configured on the 2010 CAS before I attempt the confgiuration on the 2013 CAS? I just dont want to install 2013 and have Outlook connectivity issues right out of the gate...
Thanks in advance!

Outlook 2007 and 2010 are supported for Exchange 2013, you just need to push out the latest patches.
http://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
If you configure the URLs properly in Exchange 2013 to URLs that point to the Exchange 2010 servers, your clients shouldn't try to talk to the Exchange 2013 server.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Need to update Exchange 2010 to SP1 from base

I need to update my base install of Exchange 2010 to SP1 and eventually SP2. This sits on a 2008 R2 server. in reading other upgrade articles, there are references to needing hotfixes at the server level - 2008 R2. There are about 5 hot fixes referenced
to upgrade to SP1 and I would assume there are a few others for the update to SP2.
Currently the 2008 R2 server is patched via Windows update through February 2014 (including SP1 for the server). Given that, can I assume that the hot fix updates have been incorporated into other updates/patches along the way for the Windows 2008 R2
server? Or do i still have to install each of those hotfixes manually?
Also, in one of the patches, it spoke of needing, or using .net framework 2.0 and 3.51. currently my system has 4.5.1 on it. do i need 2.0 and 3.51 for SP1 to be installed and work correctly?
thanks
dave

Hi Dave,
I recommend you install Exchange 2010 SP3 directly. There is no need to upgrade to Exchange 2010 SP1 and then to SP2.
Service Packs are cumulative, Exchange 2010 SP3 include all fixes included in previous RUs and service packs. Here is a blog for your reference.
Released: Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Since Windows updated through February 2014, you don't need to install each of those hotfixes manually.
Besides, I would like to verify if you download .net framework 4.5.1 from website. There is no need to install it that way. You just need to open Server Manager, add .Net Framework 3.5.1 feature.
Hope my clarification is helpful.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 Migration to 2013 Coexistence url's

Hello,
What exactly is required for the virtual directory url setup for Exchange 2010 coexisting with Exchange 2013? I have been searching online a lot preparing for my Exchange 2013 deployment and can't see to find a clear answer. The information
I have come across from TechNet and other sources is all over the place with some stuff saying the external url needs to be empty while others say it should match Exchange 2013's setup. Others say the internal url should be empty while
only the external should be populated. And I have even seen others say nothing on Exchange 2010 has to be touched and that Exchange 2013 will figure proxying out on its own once I configure the new url's on it.
So what is supposed to be setup for the ExternalUrl and InternalURL to in Excahnge 2010 for coexistence with 2013? Currently my
existing Exchange 2010 is internet facing with the plan of moving that to Exchange 2013 once that goes in as per Microsoft directions on implementing coexistence.

Read the article below from Ross Smith. There can't be better article than this:
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
If exchange 2010 and 2013 are on same site, then you need to:
1. Remove External URL from Exchange 2010 CAS servers, retain the Internal URL
2. Move the SSL certificates from Exchange 2010 to Exchange 2013
3. Point the external URL to Exchange 2013 instead of Exchange 2010
4. Of course, you would need to re-configure Autodiscover, Web Services URLs on Exchange 2013 CAS servers.
Once this is done, for any mailbox that is hosted on Exchange 2010, Exchange 2013 would proxy the connections and deliver the content.
- Sarvesh Goel - Enterprise Messaging Administrator

CLUSTER(DAG) EXCHANGE 2010 - Updates

Hello
I want apply Updates in Exchange 2010 with Cluster
What is the procedure?? ( step by step please )
Thanks and regards
MCITP

If its Exchange 2010 with SP1 and above, you only need to run the maintenance script.
The script will automatically do the following tasks for you:
Calls Suspend-MailboxDatabaseCopy on the database copies.
Pauses the node in Failover Clustering so that it can not become the
Primary Active Manager.
Suspends database activation on each mailbox database.
Sets the DatabaseCopyAutoActivationPolicy to Blocked on the server.
Moves databases and cluster group off of the designated server.
Exchange services will be stopped automatically if necessary, but it is recommended to stop AV services.
Please flow the steps provided above.
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Powershell script for Exchange Server 2010 health check

People,
Can anyone here please share the Powershell to check the Exchange Server health and functionality after patching and Service Pack update?
I need to test multiple servers in my AD environment.
Thanks
/* Server Support Specialist */

Hi,
In Exchange 2010, you can use the Test-ServiceHealth cmdlet to test whether all the Microsoft Windows services that Exchange requires on a server have started.
A related article about this command.
https://technet.microsoft.com/en-us/library/aa998852(v=exchg.150).aspx
You can also use the EXBPA tool to do Exchange server health check. You can look at the blog below.
http://blogs.msdn.com/b/douggowans/archive/2007/06/06/run-your-own-exchange-server-health-check-the-tools.aspx
Hope this is helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Database redundansy health check failed ( Exchange 2010 sp3 )

Hello all ,
One of the mailbox server have been getting the following error in in application , sometimes
RealCopyQueu is 256 and sometimes 0 and healthy .
Kindly share how can resolve it please

Hi,
I suggest we refer to the following article to troubleshoot this issue. Run
Database Redundancy Check Script.
http://social.technet.microsoft.com/Forums/exchange/en-US/b1cfbc4b-b17d-4148-adce-1a565d0f5746/exchange-2010-event-id-4113-msexchangerepl-health-check-failed
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

SCOM health check on Exchange 2010 servers

Hi,
Does SCOM have any built-in function to perform
health check on Exchange 2010 servers?

You can check health check of Exchange 2010 by install management pack of Exchange 2010.
Here's management pack of exchange 2010
http://www.microsoft.com/en-us/download/details.aspx?id=692
Before Import management Pack and how to configure it, you can check below link
http://technet.microsoft.com/en-us/library/ee758051%28v=exchg.140%29.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Exchange 2010 Org Health check telling me I need Enterprise CALs, bug?

Similar Messages

Maybe you are looking for