Exchange 2010 & Outlook 2010 - Cached Mode "okay" work well for you?

Hi All,
On our Client Laptops/PCs we disabled cache mode a long time due to issues experienced with a combination Delegates and Cached Mode occasionally affecting Calendaring.  We'd end up with vanishing appointments, etc.
What I'd like to know from you is if you've had a positive experience with Exchange 2010 & Outlook 2010 32bit.  If you could impart any gotchas, etc.  Our environment is fairly vanilla with a total of 1500 Users.
Thank you very much for your time,
Mr Mister

Hi,
I am using myself outlook 2007 over than WAN (VPN) connection with Exchange 2010 SP2 with about 3 GB mailbox and i personally have not faced any issues. Also, we have about 600 usres with more than 2 GB mailboxes using Outlook 2010 in online mode and
there are not many issues other than email with rich text format with screen shots attached in the mail body causing outlook hang. if we use the same email in html then no issues.
It all depends on the sizing of your CAS and mailbox servers and also on the NIC speed configured on the server. I personally feel that we should have NIC card set to 1GB on the servers also the backup and replication should be on seperate dedicated LAN.

Similar Messages

  • Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

    I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
    I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

    trying to find out same thing , store said works with new intel processor, My mini dont finding.....

  • Can Outlook 2013 cached mode disabled work offline?

    Hello
    I would like to please someone help me to resolve a concern. I have a client Outlook 2013 cache mode disabled by policy, however when you need to open Outlook without connecting to any network, is not possible and a message that the server is not online.
    Is there a way to change this behavior and that an Outlook client that has disabled the cache can work offline?
    Many thanks

    Hi
    No, that is what cached mode is used for.
    You can use OWA offline if you are disabling cache mode with policy.

  • Has the minimal (max performance) CD install worked well for you,or n

    I'm just trying to get my system setup for the best performance possible. I found something interesting... there's only 2 more services that install when you go the full route vs. minimal (max performance) route. To be exact, it's these:
    DLLML.EXE (2 instances)
    VolPanel.exe
    Now what's interesting to me, is in my previous testing... I found my performance DECREASED when I disabled all the Creative Labs services. It decreased in every benchmark I ran (3dMark 200-2006 and PCMark 2004-2005 benches).
    Now I could test everything with each version... minimal(max performance) vs. full install... but that would be moot if people are having issues with the minimal (max performance) install. So, thanks for the feedback!

    If it worked OK for you (max install vs. minimum performance install) please say it did. If not, then please say what was wrong.
    Thanks!

  • Outlook 2007 cached mode not working for old exchange 2003 users

    For some reason outlook isn't receiving emails straight away when in cached mode for users which we moved (few years ago) from exchange 2003 to 2007 (we now have everyone on exchange 2010). I checked the security tab in AD and compared new and old users
    and the permissions are completely different.
    Creating a new AD account and linking the old email account to it, fixes the issue but that's not really an option for over 100 users.
    Has anyone else had this issue?

    Hello,
    What's the difference between the permissions?
    Can the users receive emails from OWA?
    In addition, please make sure your Outlook 2007 has installed the latest update. And try to use
    outlook/cleanips and check if it helps. See:
    http://support.microsoft.com/kb/968773/en-us
    Best Regards,
    Steve Fan
    TechNet Community Support

  • WiFi work well for you?  Not for me...

    My iPod Touch's Wi-Fi has never seemed very effective from day one on my home network or when roaming. Does it work better for others?
    1st: My home network uses a D-Link wi-fi 802.11G router, with three computers attached (one iMac, one Dell laptop and one no-name PC). I'm on a different channel than my neighbours. Using a WEP key. v1.1.3 on the Touch.
    Here's what I get...: Even sitting right next to my wireless router, most pages I try to load in Safari time out. It only seems to work normally with loading a page that has one picture and no text. I can get the Google home page pretty reliably, maybe in 5 seconds or so.
    For many sites, I have to stop it and re-load 15-20 times and maybe... a page will then suddenly load. Many never do. Some pages work better like the Google page - but I don't see the pattern on when.
    I've tried using the browser on other networks in public places and I get the same results.
    I also just bought the upgrade, but the stock app times out (only ever worked once), the maps loaded eventually, I got 34 of my several hundred e-mails to load, YouTube app works more reliably than safari, the iTunes one never has, weather times out.
    I'm going to get TimeCapsule when it comes out, and I have the (likely false) hope that using its Airport Extreme router will improve things and my Touch will work better. Is there something else I might be missing?

    I had this exact web page loading oddity after I upgraded to 1.1.3
    it had worked just fine from Xmas to the upgrade
    apple tech support couldnt help at all except to suggest the obvious which was to try I different wifi network
    I did and it worked
    so it seemed something was now incompatible with my 5+ yr old linksys 55ag router
    so I decided to for 50$ try a new router
    I bought a linksys 54 g router and now it works
    the mystery as to Why still bugs me
    apple can't/won't say why or how 1.1.3 could have been responsible
    anyway I'm working now and its probably better with a new router I guess
    othrs seem to be having similar issues but nothing difinitve
    goo luck

  • "Sent Items" folder can not be synced up in time for Outlook 2013 cache mode

    Hi,
    I found a strange problem in Outlook 2013 cache mode. Hope anyone can help me find out if it is the new design of outlook 2013 or outlook 2013 issue.
    I am using Exchange 2013 and Outlook 2013 client. I created two outlook profiles in two machines separately with a same exchange user, the difference for the two profiles is one is in cache mode, and the other is in uncache mode.
    I launched outlook using the profiles in the two machines, go to "Sent Items" folder, I assume there are some messages in this folder in your mailbox, do below steps:
    1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately.
    2. modify another messages in the "Sent Items" folder from the profile in uncache mode, in this case, the changes will never be synced up to the profile in cache mode.
    In the second action above, even if I clicked "Send/Receive" button, and waited for whole night, the changes was not synched up to the cached mode side. The way I can get the latest changes to the "Sent Items" folder is "clear
    offline items" and click "Update folder" or I need to remove and create the profile again.
    All in all, the changes to the items in "Sent Items" folder of Outlook 2013 which was did from cache mode will be synched up to exchange server side immediately, but the changes which was did from exchange server side will
    never be synched up to the cache mode side unless the end-user clear the offline items and update folder or create a new profile again.
    Any help would be appreciated, thanks in advance!
    Best Regards, Emily

    The first behavior is by design even in the previous version of Office.
    "1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately." 
    Uploading local changes ---- By default, when you make a change locally, that change is synced to the server after 15 seconds. When you make another change within those 15 seconds, then the timer is reset again. As now you
    could in theory hold off synchronization indefinitely, there is the maximum timer. This timer is started after the first change that you made and when it reaches 60 seconds, then a synchronization will occur to upload all the changes that you have made thus
    far, no matter how many seconds are left on the upload timer.
    However, in second section, this should be a downloading server changes
    behavior ---- When a server side mailbox change occurs, Outlook is notified by the Exchange server of this change. By default, Outlook will then wait 30 seconds before synchronizing these changes. If there are any other changes occurring
    at the server level within these 30 seconds, then these changes are downloaded at the same time as well.
    At this time, please directly modify the message in sender items folders through Web-based access and then wait over 30 seconds to check if the items changes from cache mode profile. Please also test if we can reproduce that in other folder.
    Let me know the result. Thanks.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • After sharing itunes with MP3 rocket I get a pop up window telling me that my Apple Push is not working at present. Do I need apple push?Everything is working well for me with itunes and Rocket. Also what is Apple push.

    I have been sharing itunes with MP3 rocket but I still purchase many songs and books from itunes normally.I have not had any trouble. Just recently a pop up window appears after I have been sharing and it tells me that my Apple Push is not working corectly and windows is looking for the problem. What is Apple Push and do I need it. as everything seems to be working well for me.Can you please advise me.

    Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
    Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

  • Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!!

    Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!!  Janice

    Hey janicem42177174,
    Adobe no longer supports the installation and use of Acrobat 6 as it is a very old version which is not compatible with Windows 7.
    I would suggest you to please use the latest version of Acrobat i.e. 11.0.10 which is fully compatible with your OS with its enhanced features and functions.
    You might download a free 30-day trial version of Acrobat from here:
    Download Adobe Acrobat free trial | Acrobat XI Professional
    Let me know how it goes
    Regards,
    Anubha

  • I need a reliable office suite.   Open Office is not working well for me.  Any suggestions?

    I need a good reliable office suite.  Open Office is not working well for me.  Any suggestions?

    If you mean Open Office is not always able to correctly open documents received from clients created with MS Office, then the only real solution is to purchase Office 2011 for Mac. As good as some of the free alternatives are, they can't duplicate every feature of MS Office.

  • Does the iPod Touch work well for web browsing and submitting resumes?

    Hi, I am interested to know if the Touch would work well for a specific application. Lets say I'm surfing company career websites and want to browse and submit my resume. Would this work well for that? Usually on a computer, I can upload a Word Doc or PDF resume when the career site asks for it. Is this possible? I was wondering if anyone has tried this and can tell me. For instance, has anyone used the Touch to post a resume to Apple's or IBM's career job sites?
    Thanks.

    Just to clarify. I'm specifically asking if a web form that allows you to browse your hard drive on a Mac to submit a word doc can also be used on Touch. So if I have a PDF of my resume, can I use a webform to submit it just like on a mac?

  • I'm using ProTools9 and an MBox, will Mainstage 3 work well for me? Will i be able to use my plugins?

    I'm using ProTools9 and an MBox, will Mainstage 3 work well for me? Will I be able to use my plugins?
    I want to perform live, using a few stems as playback, and I want to put fx on my live vocals.

    ProTools plugins only work in ProTools. The MBox should work fine with the CoreAudio drivers.

  • Will After Effect work well for adding subtitles to a music video?

    Will after effect work well for adding subtitles to a music video?  Or is there an easier Adobe product I should use?

    Is there a way to protect music and video after a change is made to the beginning of a finished movie so as not to throw off the already completed music and video timeline?
    If you are referring to music in the "floating" green background, then no. It will automatically readjust itself to the start of your project each time new material is added to the beginning of your project. On the other hand, you can add your music to a clip rather than a background and this audio you can "pin" to a clip so that it remains in the same position relative to the clip and any following clips which it may overlap.
    ADDED: Oops! Looks like Winston beat me out here...
    Message was edited by: Jon Walker

  • Is LION OS working well for all you?

    Is LION OS working  well for all you? never thought it could be such a problem, it's the fisrt time it happens to me with an Apple product!. problems with safari, aperture, iphoto, opening/closing windows, right now is so close in performance to all windows versions than Apple high quality products at the level that all we have been expected with the release of Lion. Really dissappointed, and just hope that Apple tech suppor team solves this situation with a new sofware update.

    For most yes, For me definitely yes. I upgraded over SL, used it for a week  or more. Then updated my daughter's i5 MBP. that went well and she is happy. Then I updated my wife's MB Air. now THAT should tell you the confidence I have built in Lion. !!!

  • Will an HDMI Switch work well for AppleTV to TV?

    Will an HDMI Switch work well for AppleTV to TV?

    check this discussion regarding my comments on switches and ATV.
    https://discussions.apple.com/message/18031660#18031660

Maybe you are looking for

  • Installation problem with j2eesdk-1_4-dr-linux-eval on RedHat 9

    After installing j2sdk-1_4_2_03-linux-i586-rpm.bin, I've tried to install j2eesdk-1_4-dr-linux-eval. # chmod a+x ./ j2eesdk-1_4-dr-linux-eval # ./ j2eesdk-1_4-dr-linux-eval -console However, j2eesdk-1_4-dr-linux-eval shows the following error message

  • W530, W7-64: external monitor is dark except for mouse pointer

    Hello, I'm starting to experience this problem. Initially I had no problems with using an external monitor, but now I cannot use it. When I switch to the external monitor, the screen is dark, except for the mouse pointer which moves correctly.. Anyon

  • Calling a pl\sql package main precedure from a SHL script

    If I run this procedure from TOAD suppl_load_main MY package is executed, I need to be able to handle this to the user, so they can run it from our application, I am using a shl script to call this precedure, I done this before and it works, I never

  • Blocking GR till GI is not complete

    Dear PP Gurus, We are following the normal process of creating production orders and issuing the goods to the operations, confirming the operations and the doing the GR for the finished product. In this scenario, how can we block GR for a material be

  • Implemention of JAAS+servlet+jboss+sql database

    Hi, I am trying to implement JAAS for login module using code and CallbackHandler( ie lc = logincontext(...).), but i got a sample code which is used for commandline execution, but i need to implement in web application, what all are the files that i