Exchange 2010 + Outlook 2013 = Items deleted from inbox, Keep Re-Appearing. (Cached mode outlook only)

Hey Team,
We have a single user who when she deletes items from the Inbox they re-appear (in the inbox), if she is running in cached exchange mode. The items do not re-appear in OWA.
She is not experiencing any network connectivity issues
We have rebuilt her MAPI profile including deleting all existing OST files
We have removed and reinstalled outlook / office 2013
She is the only user with the issue
There are no Sync issues
As soon as we disable cached exchange mode this issue immediately goes away, she is running Office 2013 RTM.
Any Ideas,
Thanks,
Robert
Robert

Hi Robert,
If change another PC to configure her mailbox within outlook 2013, is there the same issue?
In addition, you can try to move her mailbox to another database and check if any helps.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

"Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

Hi Everybody. I have a weird one for you.
I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
It looks more like a profile issue.
She's a very active archivist, so she only has 486MB of space used by her mailbox.
It's well under quota.
It's been really puzzling me.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi Timssims,
Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
I suggest asking Outlook Forum for help so that we can get more professional suggestions.
For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
However I also have some suggestions for your reference:
1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
2. Please also paste the detailed error message if "operation failed" is not the
complete information.
3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Manually Move Public Folders from Exchange 2010 to 2013

Hi all,
I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
The final error is the following:
FailureCode                      : -2146233088
FailureType                      : SourceMailboxAlreadyBeingMovedPermanentException
FailureSide                      :
Message                          : Error: Couldn't switch the mailbox into Sync Source mode.
                                   This could be because of one of the following reasons:
                                     Another administrator is currently moving
the mailbox.
                                     The mailbox is locked.
                                     The Microsoft Exchange Mailbox Replication
service (MRS) doesn't have the correct
                                   permissions.
                                     Network errors are preventing MRS from cleanly
closing its session with the
                                   Mailbox server. If this is the case, MRS may continue
to encounter this error for
                                   up to 2 hours - this duration is controlled by the TCP
KeepAlive settings on the
                                   Mailbox server.
                                   Wait for the mailbox to be released before attempting
to move this mailbox again.
So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
FailureCode                      :
FailureType                      :
FailureSide                      :
Message                          : Informational: The request has been temporarily postponed because the mailbox is
                                   locked. The Microsoft Exchange Mailbox Replication service
will attempt to continue
                                   processing the request after 2/14/2015 12:38:20 PM.
Finally, digging more into reports of migration I found this:
MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2
exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354
StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
Regards!

What script and process you are running to migrate the Public Folders?
And what do you mean by Manually?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.comTwitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 to 2013 Migration: Authentication/Proxy Settings Issue

I'm in the final stages of preparing for our Exchange 2010 to 2013 migration. I'm noticing minor authentication issues on mobile devices (android & ios) and proxy setting issues with Outlook that require user intervention. In an effort to make the migration
as smooth as possible for our internal users, I'd like to get these settings ironed out before starting the migration.
Symptoms:
Outlook - I'm aware that internal Outlook usage has changed its connection protocol from RCP/TCP to RCP/HTTP, but it appears that Outlook isn't updating its settings in the "Microsoft Exchange Proxy Settings" after a users mailbox has been migrated
from 2010 to 2013. Currently, 2010 users with Outlook 2013 have the following settings configured in Outlook's Exchange Proxy Settings:
URL to connect to my proxy server for Exchange: webmail.domain.com
Connect using SSL only: Checked
Only connect to proxy servers that have this principal name in their certificates: Unchecked
On fast networks, connect using HTTP first, then connect using TCP/IP: Unchecked
On slow networks, connect using HTTP first, then connect using TCP/IP: Checked
After migrating a user's mailbox from 2010 to 2013, the above settings remain the same in Outlook and their client disconnects from Exchange and isn't able to reconnect. After manually enabling the checkbox for "On fast networks, connect using HTTP
first, then connect using TCP/IP", Outlook clients are able to connect to Exchange via their newly migrated mailbox.
Is there a way to automatically updating these 2 proxy settings in Outlook during the migration instead of having to manually change each user's configuration in Outlook?
Android & iOS - Currently, users on Android & iOS with Exchange 2010 mailboxes have the following configuration:
domain: blank
username: their AD username
server: webmail.domain.com
After migrating a mobile users mailbox from 2010 to 2013, neither OS (Android or iOS) is able to connect due to an authentication failure. On iOS, if I manually change the domain from blank to my company's domain, authentication succeeds and their 2013 mailbox
begins to update. On Android, the option to change the domain name from null is grayed out, requiring the user to delete the Exchange profile and re-add it with the domain name intact. Is there a way to configure Exchange 2013 to not require the domain name
for mobile users in the same way that it's been working for us with Exchange 2010?
Please let me know if you require cmdlet print outs of my virtual directories to help troubleshoot the issue.

Hi,
Generally, when the user mailbox is moved from Exchange 2010 to Exchange 2013, the Autodiscover service would detect the changes and update the new configuration automatically.
Please make sure the autodiscover service in your new Exchange 2013 is configured correctly. We can create a new mailbox in Exchange 2013 and check whether the new Exchange 2013 user can setup account successfully in Outlook or not. If the new user works
fine, it indicates the autodiscover service in Exchange 2013 should be proper for internal user.
Please restart the following Exchange service to have a try:
Microsoft Exchange RPC Client Access
Microsoft Exchange Mailbox Replication
Restart IIS service by running IISReset in a Command Prompt window.
Then check whether the Outlook client can connect to Exchange 2013 or not.
As for Android & iOS issue, I suggest we can ask a question in ActiveSync forum for more suggestion:
https://social.technet.microsoft.com/Forums/en-US/home?forum=exchangesvrmobility
Regards,
Winnie Liang
TechNet Community Support

Exchange 2010 and 2013 coexistence Internal and external URL

Hi all,
been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
Still i dont get any smarter.
Here is scenario:
Exchange 2010
Cas1
Cas2
Mailbox1
Mailbox2
Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
Exchange 2013
CAS+Mailbox
Cas+Mailbox
DNS
mail.exchange.com pointing to VIP (kemp loadbalancer)
Autodiscover ( pointed to same vip ,kemp load balancer)
Outlook anywhere on all servers (2010 and 2013)
Internal ( pointing to VIP on Kemp)
External ( pointing to external IP,then it passes firewall that again passes to kemp)
Problem we are having is when migrating users from Exchange 2010 - 2013.
Users using Outlook 2010
restart of outlook and mail works fine.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Users using Outlook 2013
Outlook in disconnected status,only fix is to create new profile.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
Where is the config wrong?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Martina,
did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
Tried repair Outlook profile,no og.Only fix is to setup New account.
Any more tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Migrate Exchange 2010 to 2013 External Mail Flow

Dear All,
I am in the middle of Exchange Server 2010 to 2013 Migration. The scenario is I have single Exchange 2010 server with HUB/CAS/Mailbox and installed new Exchange 2013 with single CAS and single Mailbox server. The internal email flow between Exchange
2010 to 2013 and 2013 to 2010 is working. Having some issues and need assistance to resolve at earliest.
The issue with the external mail flow and I want to Exchange 2010 should be configured to send external email while migrating users to Exchange 2013. Once migrate all users to Exchange 2013 then will configure Exchange 2013 send connector.
How can I configure single name space of web URL for OWA both on Exchange 2010 to Exchange 2013, if user mailbox is in Exchange 2010 can access same OWA URL as user migrate to Exchange 2013.
How to configure SSL certificate, I have single URL certificate this would be enough for OWA, ActiveSync and Anywhere.
Is that possible if directly move the Exchange 2010 database to Exchange 2013 database, this will move all users mailboxes in one go or do I need to migrate users mailbox individual or in bulk.
Kindly guide if any thing missing that need to address during start the migration activity.
Thanks in Advance

Hi ,
Sorry for delay.
Question : Thanks for your valuable response. On
point no.2, I want to use same external URL for Exchange 2010 and Exchange 2013, is this possible if user is on exchange 2010 server or migrated on Exchange 2013 can use same external single name space URL to access OWA ?
Yes you can have the same External URL for the exchange 2010 owa and exchange 2013 owa.So users from exchange
2010 and exchange 2013 can access owa on the same URL from external world.For exchange 2010 users owa connections will be proxied from exchange 2013 to exchange 2010.
For mailbox connectivity issue in exchange 2013 :
1.From internal outlook clients ,Please check the internal outlook anywhere name is resolved to exchange
2013 server and also make sure the authentication set on the outlook anywhere is set to NTLM. Same time we need to have the internal outlook anywhere name on the SAN certificate.
2.Make sure the names used exchange on 2013 URL'S is available on the SAN certificate and also the certificate
needs to installed on the exchange server and that certificate has to be enabled for the required services like iis,pop.imap,smtp.
3.Make sure the outlook client request coming for internal outlook anywhere name and also to autodiscover
service is not reaching the proxy server if you have on your network.
In case if you have proxy server in your environment for internet access ,So for that we need to add the internal outlook anywhere name and autodiscover name
on the internet explorer proxy exceptions for all the internal outlook clients.We can globally achieve it through group policy.
4.please share me the output for the below mentioned command.
get-ClientAccessServer -Identity “server name” | fl AutodiscoverServiceInternalURI
5.If you are having outlook 2007 then make sure it fully patched with latest sp and updates.
6.On which operating system version those outlook 2007 clients are installed?
Please reply me if anything is unclear.
Thanks & Regards S.Nithyanandham

Exchange 2010/Outlook 2010 Security Alert (...there is a problem with the site's security certificate.)

I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273c

Sorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c

Exchange 2010 to 2013 users migration

Hi,
I am migrating users from Exchange 2010 to 2013 and facing a lot of migration issues. few of them are as follow.
1. It hung up at "syncing" and end up with a failure.
2. After a long migration i got the following errors
Error: MigrationPermanentExeception: Failed to reset the target mailbox after the move. Error Details:MaipExceptionADUnavailable: Unable to prepopulate the cache for user :: on domain controller xyz.domain.com (hr=0x80004005,ec=2414) Diagnosti Context: Lid:
65256 Lid:1494 ---- Remote Context Beg ---- Lid: 52664 StoreEc: 0x96E Lid: 35973 StoreEc: 0x96E Target Mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible.
Error details: Target mailbox connection was lost.
3. users migration is taking a lot of time although mailbox size is not big and both servers are in same datacenter.
Need urgent help pls....

Hi,
Here are the general steps for troubleshooting mailbox moves:
1. If the move request didn't complete, view the Move Request Statistics.
2. If the move request completed with errors, view the move report.
3. View the Event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
4. use the Exchange Management Console or the Exchange Management Shell to increase the diagnostic logging levels on the Client Access server for the Mailbox Move and Service categories of the MSExchange Mailbox Replication service.
For more detailed information about general steps for troubleshooting mailbox moves, you can refer to the article below:
http://technet.microsoft.com/en-us/library/dd638094(v=exchg.141).aspx
Additionally, in order to narrow down the cause, I’d like to confirm the following information:
1. Are the problematic target mailboxes in the same database?
2. Is there a time boundary? After that, you cannot move mailboxes:
http://social.technet.microsoft.com/Forums/en-US/90403f75-e530-478a-ab68-27823b730f68/exchange-2013-batch-to-migrate-users-from-2010-database-is-hung-at-syncing-after-a-disaster?forum=exchangesvrdeploy
Thanks,
Angela
Angela Shi
TechNet Community Support

Exchange 2010/Outlook 2011 woes

A cautionary tale for anyone thinking of upgrading to an Exchange 2010 server. I have been working successfully with Mail/iCal/Address Book on an Exchange 2007 for over a year. My hosted exchange provider offered a free upgrade to Exchange 2010, and I decided to purchase Office 2011 to use Outlook. Big mistake. Now I am stuck with the following issues:
1. Mail has an incompatibility with Exchange 2010 - sent messages lack a "From:" field in the raw message source (see http://discussions.apple.com/message.jspa?messageID=12591913)
2. My hosted Exchange provider also has a Blackberry Enterprise server. But when you file sent messages in Outlook 2011, they fail to appear in the corresponding Blackberry subfolders - they disappear from the main message list and then do not appear in the subfolder. Received messages file with no problems - sent ones don't. Very weird, and very annoying. Sent messages filed in subfolders via Outlook Web Access appear properly on the BB handheld.
3. Time zones in Outlook 2011 conflict with the Exchange server. Adding an appointment via the Blackberry, the appointment initially appears in the correct place, then a few seconds later, jumps an hour forward. Quitting Outlook on the desktop machine solves the problem... Outlook has Sydney as GMT+11, which is incorrect. It is GMT+10, but with an extra hour for daylight saving in summer. The server settings, as displayed on Outlook Web Access, correctly show Sydney as GMT+10.
As a result, I am now stuck using Outlook web access as my only reliable mail/calendar application, with all the limitations that that entails (no recall of previously used email addresses for example). And I will now have to wait for either a new version of Outlook, or a new version of Mail...
Any other users experiencing any of these issues?
Thanks in advance.

I'm in the middle of a PC -> Mac migration and have hit a lot of snags with Exchange 2010.
All clients are running 10.6.4. Mail and Contacts seem to be working properly. iCal however is very problematic. When attempting to add shared calendars through the delegation tabs of Account Settings I am able to find the accounts, add them to the delegate list, but the client is not able to grab any calendar data.
I've got another issue which is Outlook 2011 font sizes being way to small for my older users, and the inability to separate shared calendars by color. In the past admin assistants were able to separate all the calendars of the attorneys they support by color and in columns, using Exchange 2007 for PC. Now the only way to distinguish between calendars is by selecting the calendar you want to see from the calendar list on the left, causing the calendar events to highlight with a darker shade of the default gray all shared calendars are assigned.
The fonts are a whole separate issue which I've researched exhaustively and found nothing to indicate that there is any way to fix this currently. The older users have on their own gone about decreasing their screen resolution and increasing the default font size at the system level.
Is there any support avenue within MS to or Apple to help with this? Apple has been useless, I've tapped into the Apple Consultants Network and they too are unaware of how to resolve these issues. Does MS have a support vein for Outlook 2011 users on an Exchange 2010 server?

Out of office sending out old messages - Exchange 2010 - Outlook 2007

Tracking down an issue of a user (I think it's only one) having their Out of Office Message always being a previous message from a year or two back. Doesn't matter if it's changed in Outlook 2007 or in OWA.
I've read some older post on this, but didn't find a clear answer.
This current Exchange 2010 setup is a migration from 2003. Could this be a leftover migration issue?
Anybody have this happen recently?

Hi,
How do you know this is an old reoccurring message? Based on the content or time?
Since the MailboxAutoReplyConfiguration is correct, I suspect the issue can occur by certain client machine. At this stage, I suggest you disable OOF and re-enable
OOF on the problematic machine. If the issue persists, please refer to the following article to clean the problematic client’s Outlook rules. (run Outlook.exe /cleanrules in Run console.)
http://www.tech-recipes.com/rx/2161/outlook_2007_clean_up_command_line_switches/
Thanks.
Novak Wu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Using IIS AAR as a reverse proxy for Exchange 2010 & Lync 2013

hi
i am planning to use IIS AAR as reverse proxy solution for both Exchange 2010 & Lync 2013 . need clarifications on the below.
Is it production ready proof solution of using IIS AAR as a reverse proxy solution , if yes what is the sizing considerations for the same.
Can we have exchange reverse proxy and lync reverse proxy on the same IIS ARR server.
Is there any special consideration(license/certificates/cal licenses) needs to be taken care while using this solution
4. Deployment Guide available?

hi steve.. thanks for reply..
1 have gone through that.. however having both exchange & lync reverse proxy on single server is unanswered and the reason for having this in exchange forum is to have consideration from exchange prospective as well ...
I am also wondering this. Can both exist on the same set of proxy servers? I also plan to have a load balanced solution. Has anyone had any luck with doing that?

Exchange 2010 to 2013 Public Folder Migration -- Token Serialization

Here is the log entry,Failed to save admin audit log for this cmdlet invocation. Organization: First Organization Log content:Cmdlet Name: New-PublicFolderMigrationRequestObject Modified: f0daff33-6a93-4367-b609-662cfa0b92de\71fc0595-b5d7-4f15-8b7c-bffcefbd810fParameter: SourceDatabase = Public Folder Database Parameter: CSVData = VGFyZ2V0TWFpbGJveCxGb2xkZXJQYXRoDQpDb2JvY28gUEYsXA0KQ29ib2NvIFBGLFxJUE1fU1VCVFJFRVxBcg==...Caller: ExternalAccess: FalseSucceeded: TrueRun Date: 2015-07-07T12:41:45OriginatingServer: (15.00.0995.012)Error:Microsoft.Exchange.Data.ApplicationLogic.AuditLogAccessDeniedException: The requesting account doesn't have permission to access the audit log. --- System.Web.Services.Protocols.SoapException: The requesting account does not have permission to serialize tokens. at...

Hey Guys!
I'm in the process of testing a Public Folder migration from Exchange 2010 to 2013, I've been following the recommened migration scenario from Microsoft but have ran into this issue when running New-PublicFolderMigrationRequest. I let the request sit at a queued status for over 6 hours and then decided to look at the event logs. I'm receiving an access denied, requesting account does not have permission to serialize tokens.
Luckily this is just a test and not in a production environment :-)
Any suggestion or help to point me in the right direction would be appreciated
Thanks Guys
This topic first appeared in the Spiceworks Community

Exchange 2010 to 2013

Hi Everyone,
We are currently running exchange 2010 on a 2012 server. We want to migrate our exchange 2010 to 2013. What would be the best way of upgrading? Can we install exchange 2013 on the same server as exchange 2010 and then move the roles, or we need
to purchase another server in order to install exchange 2013?
Thanks

Hi,
We can install an Exchange 2013 into an existing Exchange 2010 organization, and then move the Exchange resources, such as mailboxes, public folders, and connectors to Exchange Server 2013. However, we can't perform an in-place upgrade from Exchange Server
2010 to Exchange 2013.
For more information, here is an article for your reference.
Install Exchange 2013 in an Existing Exchange 2010 Organization
http://technet.microsoft.com/en-us/library/bb124350(v=exchg.150).aspx
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 & Outlook 2010 - Cached Mode "okay" work well for you?

Hi All,
On our Client Laptops/PCs we disabled cache mode a long time due to issues experienced with a combination Delegates and Cached Mode occasionally affecting Calendaring. We'd end up with vanishing appointments, etc.
What I'd like to know from you is if you've had a positive experience with Exchange 2010 & Outlook 2010 32bit. If you could impart any gotchas, etc. Our environment is fairly vanilla with a total of 1500 Users.
Thank you very much for your time,
Mr Mister

Hi,
I am using myself outlook 2007 over than WAN (VPN) connection with Exchange 2010 SP2 with about 3 GB mailbox and i personally have not faced any issues. Also, we have about 600 usres with more than 2 GB mailboxes using Outlook 2010 in online mode and
there are not many issues other than email with rich text format with screen shots attached in the mail body causing outlook hang. if we use the same email in html then no issues.
It all depends on the sizing of your CAS and mailbox servers and also on the NIC speed configured on the server. I personally feel that we should have NIC card set to 1GB on the servers also the backup and replication should be on seperate dedicated LAN.

Hello! How can i setup and what to enable that my secretary has my shared calendar on her Iphone and that she can edit it? We are on Exchange 2010, Outlook 2010, Iphone 4s. Can it be done through some app? Thank you!

Hello! How can i setup and what to enable that my secretary has my shared calendar on her Iphone and that she can edit it? We are on Exchange 2010, Outlook 2010, Iphone 4s. Can it be done through some app? Thank you! I'm trying to avoid creating my exchange activesync account on her Iphone and then sync only my calendar.

Thank you for your time. I'm trying to avoid that because she can then simply turn on mail syncronization and then she could read my mail. Another reason is our password policy, that enforces changing our windows logon password every 90 days. Of course changing windows logon passwords demands changing exchange account logon info (password) on Iphone. I have read somwhere that there was an app but it was removed from app store. Any other suggestions would be appreciated.

Exchange 2010 + Outlook 2013 = Items deleted from inbox, Keep Re-Appearing. (Cached mode outlook only)

Similar Messages

Maybe you are looking for