Exchange 2010 powershell calendar permissions

I want to give user01, user02, user03, and user04 reviewer rights to user05's calendar. What is the best way to do this? with a .csv file?
Please explain fully.

Dear All,
I also use this syntax:
Import-csv C:\user.csv | ForEach-Object{Add-MailboxFolderPermission -identity $_Samaccountname":\Calendar" -User "username" -AccessRights "reviewer"} , but isn't work.
csv file content:
"SamAccountName"
"testuser1"
"testuser2"
I got this error:
Add-MailboxFolderPermission : An existing permission entry was found for user: xyz.
At line:1 char:70
+ Import-csv c:\users.csv | foreach-object {Add-MailboxFolderPermission <<<< -identity $_Samaccountname":\Calendar" -User "[email protected]" -Acc
essRights "Author"}
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
    + FullyQualifiedErrorId : 377F77B8,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
Add-MailboxFolderPermission : An existing permission entry was found for user: xyz.
At line:1 char:70
+ Import-csv c:\users.csv | foreach-object {Add-MailboxFolderPermission <<<< -identity $_Samaccountname":\Calendar" -User "[email protected]" -Acc
essRights "Author"}
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
    + FullyQualifiedErrorId : 377F77B8,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
Certainly I checked and there is no permission for xyz user on testuser1 and testuser2 Calendar.
Any help would be appreciated

Similar Messages

Exchange 2010 Room Calendar Permissions are too permissive when Default is set to None.

Help! Room Calendar permissions are too permissive when Default is set to None.
We are a brand new Exchange 2010 shop, and have setup several conference rooms. Many of them are restricted to specific groups to book via In-Policy Requests using Resource Booking Attendant. The Room Calendar permissions for most
rooms shows only two options for the Default access: None and Full Details. Default is set to None, yet if someone opens the room calendar in Outlook (& they are not part of the In-Policy restrictions) they are able to see the full meeting details
(even open the meeting for full details). How is this possible when by default they should not have any access as it is set to None? Some rooms would not be a problem for clients to see the details, but some rooms like Executive rooms need to be
locked down so that others cannot see the room details - None.
I also found this, although it did not make a difference. If I create an Outlook profile for the room and login as the room calendar in Outlook, go to File, Options, Calendar, Resource Scheduling, Set Permissions I get different default options:
None, "Free/Busy time", "Free/Busy time, subject, location" and Full Details. Why do I have more options in this view rather than the Room Calendar Permissions? I looked at two rooms and both Default options were set to "Free/Busy
time", so I changed these settings to None. Still the clients can view the full room calendar details. What are we missing to get the room calendar locked down so it is not displaying details to everyone?

Only the default groups and Exchange Admins have Full Access to these items, so that is not the issue.
-MailboxFolderPermission 1RP07AWest:\Calendar cmdlet and it shows the same access I see when I open the calendar in Outlook and view the Permissions as shown below - Default is set to None.
As I stated in my last reply the only thing that finally forced it to be blocked is changing the Resource Scheduling permissions under Options > Calendar for that room mailbox. If I have to do that for each room calendar, it's going to
take considerable time to change each one. Is there a cmdlet to allow me to access and change that setting as well?
RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
FolderName   : Calendar
User         : Default
AccessRights : {None}
Identity     : Default
IsValid      : True
ObjectState : New
RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
FolderName   : Calendar
User         : Anonymous
AccessRights : {None}
Identity     : Anonymous
IsValid      : True
ObjectState : New

Outlook / Exchange 2010 shared calendars performance

Hi, we are using Outlook 2010 connecting to Exchange 2010 over a WAN (120ms average RTT). Cached mode is forced on all clients. Our users are finding that performance of shared calendars is very poor in "online" mode. However as they are all using Outlook
2010, checking "download shared folders" means that ALL secondary mailbox folders are cached and we don't want this to happen. Users are typically PAs who have been granted full mailbox access to their exec's mailbox. These users may have several shared calendars
open at once which makes the situation even worse.
Is there a way that we can revert Outlook 2010 to the previous 2007 behaviour whereby with secondary mailboxes only the calendar / contacts etc are cached? I have seen articles referring to a reg value "CacheOthersMail" that can be added but this seems to
have no effect on a couple of clients we've tried - if the "download shared folders" option is checked, everything is still cached, and if it's unchecked, everything switches to "online".
Any help appreciated,
Nick

Yes, setting that registry key to 0 should do the trick. You might need to recreate the mail profile though or recreate the ost-file to directly get rid of what is currently being cached.
As you've currently forced the caching by a GPO, check your policy keys as well.
See; http://www.msoutlook.info/question/561
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Exchange 2010 Shared Calendar

We have a law firm with Exchange 2010 running. They want a team calendar (for the attorney scheduling) that can be edited by any of the secretaries. But they also need to see it on their mobile (cell) devices
What is the "best practice" for setting up a group calendar like this and make it visible to mobile devices?

Hi,
Is there any update on this thread?
Regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2010 Send As Permissions Dropping

We are finding send as rights are dropping even though they are still appearing in the send As Rights Permissions box. This has been happeneing intermittently for a few weeks now, has anyone experienced something similar?
Thanks

Hi,
As per the information and details provided by you, Send As permission is Dropping in Exchange 2010.
Please follow these steps to setup Send As Permission in Exchange Server2010: -
In Exchange 2010, Click on Start>
Programs> Microsoft Exchange> and then click
Active Directory Users and Computers.
In the View menu, click on the
Advanced Features.
Expend Users, then right click the Mailbox Owner object where you want to grant the permission, and then click
Properties.
Click on the Security tab, and then click on
Advanced.
In the Access Control Setting for Mailbox Owner dialog box, click on Add.
In the Select User, Computer, or Group dialog box, click the user account or the group that you want to grant Send As permission to and then click
OK.
In the Permission entry for Mailbox Owner dialog box, click
This Object Only in the Apply onto list.
In the Permission list, locate
Send As, and then click to select the Allow check box.
Click OK three times to close the dialog boxes.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

Exchange 2010 Powershell virtual directory recreation

Nevermind Fixed.....
So apparently you have to run those commands in Powershell version 2.0, Exchange 2010 doesn't like powershell 3.0
to do that type powershell -version 2.0
then type the exchange commands.

Ok, so I opened up my IIS console today to fix a problem with Exchange and the fix was to change one of the Modules in the Powershell Virtual Directory, but when I clicked on Modules it threw an error. So I started to try an fix that, all the forums and suggestions I read said to remove the Virtual directory and recreate it...
My problem is recreating it, I get the following error, I've googled and searched a lot and can't find how to fix this.
This topic first appeared in the Spiceworks Community

Exchange 2010 ActiveSync Calendar Issues

We use Exchange 2010, SP1, RU6 in our enterprise. We are having many problems with calendar synchronization between Exchange and iOS 5.0.1 devices (iPad and iPhone). Is anyone else having the same problem? Anyone have answers. We opened a case with Apple and they told us that these are known issues with iOS 5 and they would be addressed in a future release. Anyone know when this will be addressed? Thanks.

48 hrs now since talking with Microsoft.
I agree it is an iOS issue but Microsoft can typically find a fix around the situation regardless of the root offender. The hope is that the events may still be tagged such that Microsoft may still be able to correct the events. Regardless, Microsoft has elevated the case two levels to correct the issue. This is much more than Apple has been willing to do. Their response thus far has literally been "let us know what Microsoft says". I am not necessarily working with Microsoft but more not working with Apple (for their dis-interest in the situation). Microsoft has been on the phone with us taking traces of email calendar activity to see what the underlying problem is.
I work in education and I have since halted all further deployments of iOS devices since the majority are administrative personnel and they would definitely be hooking into the Exchange environment. My recommendation has been to my student base is to also halt deployments if they are putting students into their Exchange environments.
Not that I am an Apple basher but I don't think Apple is ready for the enterprise. Now that I have moved to a Galaxy S II, I feel safer that I will not miss my meetings. i live by my calendar. My 4s in in my drawer for now.

Running Exchange 2010 PowerShell Scripts

Hello,
I have a PowerShell Script which calls PSSnapins for Exchange tools. The Exchange Management Tools are installed on the Tidal Server
The Script works fine by itself, I have executed it as the tidal users on the Tidal Server. I have also created a batch file to execute the Powershell script, which also works on the tidal server.
However when I run the job in Tidal it doesn't run correctly by that I mean it will run the none Exchange pieces. In the Output tab it shows:
Add-PSSnapin : The Windows PowerShell snap-in 'Microsoft.Exchange.Management.PowerShell.E2010' is not installed on this machine.
At E:\PowerShell\DailyChecks\Dag_daily.ps1:7 char:13
+ Add-PSSnapin <<<< Microsoft.Exchange.Management.PowerShell.E2010
    + CategoryInfo          : InvalidArgument: (Microsoft.Excha...owerShell.E2
   010:String) [Add-PSSnapin], PSArgumentException
    + FullyQualifiedErrorId : AddPSSnapInRead,Microsoft.PowerShell.Commands.Ad
   dPSSnapinCommand
Add-PSSnapin : The Windows PowerShell snap-in 'Microsoft.Exchange.Management.Powershell.Support' is not installed on this machine
These Scripts also work via Windows Task Scheduler as written I would really like to get these to work in Tidal. We are Tidal 5.3.1.
Any help would be greatly appreciated.
Lee Merrill

I have struggled with a similar issue with Sharepoint snapin with performing a backup
I can give a couple of suggestions
Add snapin to default profiles
We also see a difference in 64 vs 32 bit oprerations
we had to add to both versions using a local profile.ps1 and adding a line
Add-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue
C:\Windows\System32\WindowsPowerShell\v1.0
C:\Windows\SysWOW64\WindowsPowerShell\v1.0
Execute remotely
Slightly different setup on our side
I am trying to invoke-command on the remote sharepoint server =
( you have to set up psremoting, etc)
Invoke-Command -ComputerName -scriptblock { E:\Backup\BackupSite.ps1}
Similarly I can execute the backup.ps1 with no issue on the server but can't from the tidal job.
I'll let you know if we find a fix
I am thinking double hop at this point and need to trust for delegation, etc
Marc

Exchange 2010 - Powershell Directory

Morning. I have googled everywhere and can't find an answer to this problem anywhere. Has anyone got an ideas??
PS C:\> New-PowerShellVirtualDirectory -Name "Powershell" -RequireSSL:$False
New-PowerShellVirtualDirectory : An error occurred while creating the IIS virtual directory
'IIS://<SVR>.<Domain>.com/W3SVC/1/ROOT/Powershell' on '<SVR>'.
At line:1 char:1
+ New-PowerShellVirtualDirectory -Name "Powershell" -RequireSSL:$False
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (<SVR>\Powershell (Default Web Site):ADObjectId) [New-PowerShellVir
   tualDirectory], InvalidOperationException
    + FullyQualifiedErrorId : 90E6376F,Microsoft.Exchange.Management.SystemConfigurationTasks.NewPowerShellVirtualDire
   ctory

Hi,
Please confirm if your Exchange Management Shell (EMS) and Exchange Admin Center (EAC) can be opened or work well in your Exchange server.
If you want to reset Windows PowerShell virtual directory for default web site in Internet Information Services (IIS), please
make sure the original PowerShell virtual directory has been deleted from the server:
1. No PowerShell listed in IIS Manager.
2. No PowerShell VD in ADSIEdit (CN=Configuration,DC=domain,DC=.com > CN=Services > CN=Microsoft Exchange > CN=Domain > CN= Administrative Groups > CN=(Groupname) > CN=Servers > CN=(ServerName) > CN=Protocols > CN=HTTP).
3. Run this command from the Elevated cmd prompt -> cscript.exe Adsutil.vbs delete w3svc/1/root/PowerShell.
If your EMS can’t be opened, then we can use Windows PowerShell Module shell to create the PowerShell virtual directory to have a try. If it doesn’t work, please collect some event logs or IIS logs in your Exchange server for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2010 Shared mailbox permissions gone

In Exchange2010, I created a shared mailbox yesterday, then granted several groups and individuals "full access permissions" to the Shared mailbox.
When I arrived at work this morning and looked at the permissions, all the permissions I had assigned were gone, except for a single individual.
I re-applied the same permissions and checked them an hour later and they were gone again. I thought it may be related to the groups, so I selected several individuals and gave them Full Access Permissions to the Shared Mailbox. I checked
that some time later to discover that several individuals were missing again..
What might cause this to happen

Hi,
As Willard suggested, please check if these problematic mailboxes are members of Domain Admins or Enterprise Admins. Domain Admins and Enterprise Admins are assigned the explicit Deny permissions for Send As and Receive as on the main Exchange Organization
object in AD. If you want to grant them full access permission, you need to remove the explicit Deny permissions.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Add Exchange 2010 Powershell Modules with Domain Controller

Hi
We are looking for a way to run Exchange PS cmdlets from Windows 2008 R2 DC. How can we load teh Exchange PS modules with any other server
Thanks in advance
LMS

You don't need to - you can open a remote PowerShell session from the DC to the Exchange server and run the Exchange commands remotely. Use the following commands:
$PsS = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri <a href="http:///powershell">http://<serverFQDN>/powershell -Authentication Kerberos
Import-PSSession $PsS -ErrorAction SilentlyContinue

Exchange 2010 Powershell PST Export

Is there a command that will export in bulk from csv with a column of SamAccountName just the following items to PST?
All Calendar Items
All Contacts
All Tasks

Not sure about a csv, but if you paste the contents of that column into a txt file you can make a PS script starting with a get-content, followed by a For Each loop that will run the new-mailboxexportrequest with the appropriate variables.

Calendar doesn't sync with exchange 2010

Calendar sync with exchange 2003 but after upgrade to exchange 2010 my Calendar doesn't sync anymore.

Hi and Welcome to the Community!
Can you expand on that please? As in, what exactly, tells you it doesn't sync anymore? Did you re-configure the Desktop Software? If so, what did that present? If not, well, you need to since you've changed your Desktop Organizer app...
Let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Exchange 2010 task scheduled scripts not working if not logged on

Hi All,
I have done a script for Exchange 2010 and I would like to create a scheduled task for it.
I have followed the guidance of Mike Pfeiffer's blog.
http://www.mikepfeiffer.net/2010/02/creating-scheduled-tasks-for-exchange-2010-powershell-scripts/
However when I set the task as “Run whether user is logged on or not”, it only works if the user running the task is the administrator. The task is run with high privileges.
If I do it with a service account (local admin, exchange org admin) it works only when:
-You run the script for an interactive session of the user or a runas cmd
-You set the Task as “Run only when the user is logged on” (and the user is logged on)
If I run the Task as “Run whether user is logged on or not” and the user is not logged on, I get an error on the connection command "Connect-ExchangeServer -auto" (and the task hangs waiting for an answer). The transcript is as follows:
Transcript started, output file is C:\scripts\informes\pruebasconexion.Log.txt
         Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #31:
Tab completion reduces the number of keystrokes required to complete a cmdlet. Just press the TAB key to complete the cmdlet you are typing. Tab completion kicks in whenever there is a hyphen (-) in the input. For example:
Get-Send<tab>
should complete to Get-SendConnector. You can even use wildcards, such as:
Get-U*P*<tab>
Pressing the TAB key when you enter this command cycles through all cmdlets that match the expression, such as the Unified Messaging Mailbox policy cmdlets.
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to CAS01.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas01.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas02.XX..Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to MBX02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://mbx02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS01.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas01.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
VERBOSE: Connecting to CAS02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://cas02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
WARNING: The service () isn't running. Connecting to remote Powershell requires this service to be running.
VERBOSE: Connecting to MBX02.XXX.es
An internal error occurred.
    + CategoryInfo          : InvalidArgument: (http://mbx02.XX...Ver=14.1.218.15:Uri) [], PSInvalidOperationException
    + FullyQualifiedErrorId : CreateRemoteRunspaceFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
The error message refers to a unkown "() service", but I have no clue of which service can be needed and it is working only when session is opened.
The command I run is
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -command ". 'c:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1';c:\scripts\informes\estado_db_dag.ps1"
UNICAN-SdeI

I experienced a similar symptom where the scheduled task was getting stuck in the "Running" state. I searched the web for others who have experienced this issue with scheduled tasks, and what I found is that there could be a few reasons why
this might happen.
I resolved my problem by adding -NonInteractive switch before the -command parameter.
Hope it helps...
In my case, -NonInteractive does indeed stop the task from getting stuck in a perpetual Running state (until it times out based on the settings in scheduled task), but I was able to deduce why by using Start-Transcript and Stop-Transcript.
Basically, the connection to Exchange is failing some reason and it sits at a prompt waiting for you to enter a FQDN for an Exchange server (same problem as the OP). Adding -NonInteractive to the scheduled task does indeed prevent the task from getting
stuck waiting for someone to enter a FQDN at a prompt that they cannot interact with, the script still does not execute correctly. Essentially, adding the "-NonInteractive" switch does not fix the underlying problem of the Exchange connection
failing.
As far as I am able to tell, this has something do with a WinRM problem. I'm having the same problem as the OP and am trying to troubleshoot it. In my case, deleting the user profile for the service account does not fix the problem.

Branch office Exchange 2010 Role base administration control for branch site administrator

Dear sir,
   Customer has a Exchange 2010 Main and Branch office environment:
- Main office Exchange 2010 CAS x2 +HTS & Mailbox x2 (Server1,2 & Server 3,4)
  (Main office administrator:domain1\administrator) - DAG1
- Branch office Exchange 2010 CAS+HTS x2 & Mailbox with DAG x2 (Server5,6 & Server7,8
   (Branch Administrator: domain1\badmin) - DAG2
   Customer would like to know what is the role which permission should grant / delegate for ID: badmin in order to manage Exchange server 5,6,7,8 ? (with manage user account and performance in DAG2 failover & branch exchange server)
Regards,
Joe Tam

Dear Brian,
   I have try in my lab to scale down into 2 x Server in 1 AD Single Domain And Single Forest. It still have many unexpected behaviour, can you please suggest whether it is a design or bug of Exchagne 2010 SP1?
Procedure:
============================================================================
Exchange 2010 Role Delegation Problem: (Single AD, Single Site)
Environment:
Server: Windows 2008 R2 AD x1 + (CAS+HTS+Mailbox) Server x1
AD Server: AD1
Exchange2010 Server : EX2010 (with SP1) – Member Server Joined to testdomain1.net
Domain Name: testdomain1.net (NETBIOS: TESTDOMAIN1)
In AD,
Login as domain administrator: Testdomain1\administrator
1. Create an Organization Unit OU1.
2. Create User User1 under OU1
3. Delegate User1 to allow create user in OU1
Select all item in “Delegate the following common tasks:
In Exchange 2010 Server,
Login as domain administrator: Testdomain1\administrator
1. Rename existing database name to HKDB1
2. Create a new database AUDB1 in EX2010 Server:
AUDB1 Create Done.
Assign testdomain1\User1 as Exchange 2010 local administrators group.
Logoff Testdomain1\administrator and Login Testdomain1\User1
Open Exchange EMC: (Failed, because no user management roles is grant).
Logoff Testdomain1\User1, Login Testdomain1\Administrator
Open Exchange 2010 PowerShell:
Delegate User1 to allow perform recipient management in HKDB1 only:
====================================================================
New-ManagementScope "HKDBSCOPE" -DatabaseRestrictionFilter {Name -Eq 'HKDB*' }
$RoleGroup = Get-RoleGroup "Recipient Management"
New-RoleGroup "HKDBRecipientManagement" -Roles $RoleGroup.Roles -CustomConfigWriteScope "HKDBSCOPE"
Add-RoleGroupMember “HKDBRecipientMANAGEMENT” -Member User1
====================================================================
Result:
In Exchange 2010 Server, logon as domain user: Testdomain1\User1
Open Exchange Management Console: (User1 able to open EMC now)
Perform Create User User2 in OU1 with Mailbox located in HKDB1
Mailbox Creation Failed because it cannot match the Database name = HKDB*
Logoff Testdomain1\User1, Login Testdomain1\Administrator
In Exchange Management Shell, enter:
Set-ManagementScope "HKDBSCOPE" -DatabaseRestrictionFilter {Name -Like 'HKDB*' }
Logoff Testdomain1\administrator, Login Testdomain1\User1
Open Exchange Mangement Shell and Create User2 again.
Create user successfully.
Perform create User User3 in OU1 with Mailbox located in AUDB1
User3 Creation Failed because it is not meet the Database restriction of User1 – Like HKDB*
Logoff Testdomain1\User1, Login Testdomain1\Administrator
Open Exchange Management Console, create User3 in AUDB1
Create User3 in Users Container, by administrator ID.
Logoff Testdomain1\administrator, Login Testdomain1\User1
Perform mailbox remove of User2
User2 mailbox remove successfully.
Perform deletion of User3
Mailbox User3 Remove Successfully.
Why User3 is allowed to deleted mailbox which is located in by using delegated of User1?
Moreover, it found that User3 properties can also be changed by using User1. Why?
Does it mean delegation cannot handle delete operation?
In Active Directory User and Computer: User2 is deleted successfully by using User1 ID.
In Active Directory User and Computer: User3 is also deleted successfully by using User1 ID.

Exchange 2010 powershell calendar permissions

Similar Messages

Maybe you are looking for